-;;; shell.el --- specialized comint.el for running the shell.
+;;; shell.el --- specialized comint.el for running the shell
;; Copyright (C) 1988, 93, 94, 95, 96, 1997, 2000 Free Software Foundation, Inc.
-;; Author: Olin Shivers <shivers@cs.cmu.edu> then
+;; Author: Olin Shivers <shivers@cs.cmu.edu>
;; Simon Marshall <simon@gnu.org>
;; Maintainer: FSF
;; Keywords: processes
;; featureful, robust, and uniform than the Emacs 18 version.
;; Since this mode is built on top of the general command-interpreter-in-
-;; a-buffer mode (comint mode), it shares a common base functionality,
+;; a-buffer mode (comint mode), it shares a common base functionality,
;; and a common set of bindings, with all modes derived from comint mode.
;; This makes these modes easier to use.
;; For further information on shell mode, see the comments below.
;; Needs fixin:
-;; When sending text from a source file to a subprocess, the process-mark can
+;; When sending text from a source file to a subprocess, the process-mark can
;; move off the window, so you can lose sight of the process interactions.
;; Maybe I should ensure the process mark is in the window when I send
;; text to the process? Switch selectable?
;; ;; Define M-# to run some strange command:
;; (eval-after-load "shell"
;; '(define-key shell-mode-map "\M-#" 'shells-dynamic-spell))
-\f
+
;; Brief Command Documentation:
;;============================================================================
;; Comint Mode Commands: (common to shell and all comint-derived modes)
;; compatibility.
;; Read the rest of this file for more information.
-\f
+
;;; Code:
(require 'comint)
(defcustom shell-prompt-pattern "^[^#$%>\n]*[#$%>] *"
"Regexp to match prompts in the inferior shell.
Defaults to \"^[^#$%>\\n]*[#$%>] *\", which works pretty well.
-This variable is used to initialise `comint-prompt-regexp' in the
+This variable is used to initialise `comint-prompt-regexp' in the
shell buffer.
This variable is only used if the variable
:group 'shell-directories)
(defcustom shell-chdrive-regexp
- (if (memq system-type '(ms-dos windows-nt))
+ (if (memq system-type '(ms-dos windows-nt))
; NetWare allows the five chars between upper and lower alphabetics.
"[]a-zA-Z^_`\\[\\\\]:"
nil)
("^[^ \t\n]+:.*" . font-lock-string-face)
("^\\[[1-9][0-9]*\\]" . font-lock-string-face))
"Additional expressions to highlight in Shell mode.")
-\f
+
;;; Basic Procedures
(put 'shell-mode 'mode-class 'special)
keep this buffer's default directory the same as the shell's working directory.
While directory tracking is enabled, the shell's working directory is displayed
by \\[list-buffers] or \\[mouse-buffer-menu] in the `File' field.
-\\[dirs] queries the shell and resyncs Emacs' idea of what the current
+\\[dirs] queries the shell and resyncs Emacs' idea of what the current
directory stack is.
\\[dirtrack-mode] turns directory tracking on and off.
`comint-input-filter-functions' are run. After each shell output, the hooks
on `comint-output-filter-functions' are run.
-Variables `shell-cd-regexp', `shell-chdrive-regexp', `shell-pushd-regexp'
-and `shell-popd-regexp' are used to match their respective commands,
-while `shell-pushd-tohome', `shell-pushd-dextract' and `shell-pushd-dunique'
+Variables `shell-cd-regexp', `shell-chdrive-regexp', `shell-pushd-regexp'
+and `shell-popd-regexp' are used to match their respective commands,
+while `shell-pushd-tohome', `shell-pushd-dextract' and `shell-pushd-dunique'
control the behavior of the relevant command.
Variables `comint-completion-autolist', `comint-completion-addsuffix',
"Called when the shell process is stopped.
Writes the input history to a history file
-`comint-comint-input-ring-file-name' using `comint-write-input-ring'
+`comint-input-ring-file-name' using `comint-write-input-ring'
and inserts a short message in the shell buffer.
This function is a sentinel watching the shell interpreter process.
Sentinels will always get the two parameters PROCESS and EVENT."
;; Write history.
(comint-write-input-ring)
- (if (buffer-live-p (process-buffer process))
- (insert (format "\nProcess %s %s\n" process event))))
-\f
+ (let ((buf (process-buffer process)))
+ (when (buffer-live-p buf)
+ (with-current-buffer buf
+ (insert (format "\nProcess %s %s\n" process event))))))
+
;;;###autoload
(defun shell (&optional buffer)
"Run an inferior shell, with I/O through BUFFER (which defaults to `*shell*').
(list
(and current-prefix-arg
(read-buffer "Shell buffer: " "*shell*"))))
- (when (null buffer)
- (setq buffer "*shell*"))
- (if (not (comint-check-proc buffer))
- (let* ((prog (or explicit-shell-file-name
- (getenv "ESHELL")
- (getenv "SHELL")
- "/bin/sh"))
- (name (file-name-nondirectory prog))
- (startfile (concat "~/.emacs_" name))
- (xargs-name (intern-soft (concat "explicit-" name "-args")))
- shell-buffer)
- (save-excursion
- (set-buffer (apply 'make-comint-in-buffer "shell" buffer prog
- (if (file-exists-p startfile) startfile)
- (if (and xargs-name (boundp xargs-name))
- (symbol-value xargs-name)
- '("-i"))))
- (setq shell-buffer (current-buffer))
- (shell-mode))
- (pop-to-buffer shell-buffer))
- (pop-to-buffer buffer)))
+ (setq buffer (get-buffer-create (or buffer "*shell*")))
+ ;; Pop to buffer, so that the buffer's window will be correctly set
+ ;; when we call comint (so that comint sets the COLUMNS env var properly).
+ (pop-to-buffer buffer)
+ (unless (comint-check-proc buffer)
+ (let* ((prog (or explicit-shell-file-name
+ (getenv "ESHELL") shell-file-name))
+ (name (file-name-nondirectory prog))
+ (startfile (concat "~/.emacs_" name))
+ (xargs-name (intern-soft (concat "explicit-" name "-args"))))
+ (apply 'make-comint-in-buffer "shell" buffer prog
+ (if (file-exists-p startfile) startfile)
+ (if (and xargs-name (boundp xargs-name))
+ (symbol-value xargs-name)
+ '("-i")))
+ (shell-mode)))
+ buffer)
;;; Don't do this when shell.el is loaded, only while dumping.
;;;###autoload (add-hook 'same-window-buffer-names "*shell*")
-\f
+
;;; Directory tracking
;;;
;;; This code provides the shell mode input sentinel
;;;
;;; The solution is to relax, not stress out about it, and settle for
;;; a hack that works pretty well in typical circumstances. Remember
-;;; that a half-assed solution is more in keeping with the spirit of Unix,
+;;; that a half-assed solution is more in keeping with the spirit of Unix,
;;; anyway. Blech.
;;;
;;; One good hack not implemented here for users of programmable shells
If emacs gets confused, you can resync with the shell with M-x dirs.
See variables `shell-cd-regexp', `shell-chdrive-regexp', `shell-pushd-regexp',
-and `shell-popd-regexp', while `shell-pushd-tohome', `shell-pushd-dextract',
+and `shell-popd-regexp', while `shell-pushd-tohome', `shell-pushd-dextract',
and `shell-pushd-dunique' control the behavior of the relevant command.
Environment variables are expanded, see function `substitute-in-file-name'."
(cond ((> num (length shell-dirstack))
(message "Directory stack not that deep."))
((= num 0)
- (error (message "Couldn't cd.")))
+ (error (message "Couldn't cd")))
(shell-pushd-dextract
(let ((dir (nth (1- num) shell-dirstack)))
(shell-process-popd arg)
(defun shell-resync-dirs ()
"Resync the buffer's idea of the current directory stack.
-This command queries the shell with the command bound to
+This command queries the shell with the command bound to
`shell-dirstack-query' (default \"dirs\"), reads the next
line output and parses it to form the new directory stack.
DON'T issue this command unless the buffer is at a shell prompt.
(goto-char pmark)
(insert shell-dirstack-query) (insert "\n")
(sit-for 0) ; force redisplay
- (comint-send-string proc shell-dirstack-query)
+ (comint-send-string proc shell-dirstack-query)
(comint-send-string proc "\n")
(set-marker pmark (point))
(let ((pt (point))) ; wait for 1 line
(setq shell-dirstack (cdr ds)
shell-last-dir (car shell-dirstack))
(shell-dirstack-message))
- (error (message "Couldn't cd.")))))))
+ (error (message "Couldn't cd")))))))
;;; For your typing convenience:
(defalias 'dirs 'shell-resync-dirs)
(setq msg (concat msg (directory-file-name dir) " "))
(setq ds (cdr ds))))
(message "%s" msg))))
-\f
+
;; This was mostly copied from shell-resync-dirs.
(defun shell-snarf-envar (var)
"Return as a string the shell's value of environment variable VAR."
(interactive (list (read-envvar-name "\
Copy Shell environment variable to Emacs: ")))
(setenv variable (shell-snarf-envar variable)))
-\f
+
(defun shell-forward-command (&optional arg)
"Move forward across ARG shell command(s). Does not cross lines.
See `shell-command-regexp'."
(cond ((null index)
nil)
((>= index (length stack))
- (error "Directory stack not that deep."))
+ (error "Directory stack not that deep"))
(t
(replace-match (file-name-as-directory (nth index stack)) t t)
(message "Directory item: %d" index)
t))))))
-\f
+
(provide 'shell)
;;; shell.el ends here