-# Hacked up Nmake makefile for GNU Emacs
-# Geoff Voelker (voelker@cs.washington.edu)
-# Copyright (c) 1994 Free Software Foundation, Inc.
+# -*- Makefile -*- for GNU Emacs on the Microsoft W32 API.
+# Copyright (C) 2000, 2001, 2002, 2003, 2004,
+# 2005 Free Software Foundation, Inc.
#
# This file is part of GNU Emacs.
-#
+#
# GNU Emacs is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
-#
+#
# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
# along with GNU Emacs; see the file COPYING. If not, write to the
-# Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
+# Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301, USA.
#
ALL =
all: $(ALL)
-topdontcompile = cus-load.el forms-d2.el forms-pass.el patcomp.el \
- subdirs.el version.el
-maildontcompile = mail/blessmail.el mail/sc.el
-playdontcompile = play/bruce.el
-interdontcompile = international/latin-1.el international/latin-2.el \
- international/latin-3.el international/latin-4.el \
- international/latin-5.el international/mule-conf.el
+SQUOTE='
+# '
+
+lisp = $(CURDIR)
+srcdir = $(CURDIR)/..
+
+# You can specify a different executable on the make command line,
+# e.g. "make EMACS=../src/emacs ...".
+
+EMACS = "$(THISDIR)/../bin/emacs.exe"
+
+# Command line flags for Emacs. This must include --multibyte,
+# otherwise some files will not compile.
+
+EMACSOPT = -batch --no-init-file --no-site-file --multibyte
+
+# Set EMACSLOADPATH correctly (already defined in environment).
+EMACSLOADPATH=$(lisp)
+
+lisptagsfiles1 = $(lisp)/*.el
+lisptagsfiles2 = $(lisp)/*/*.el
+ETAGS = "../lib-src/$(BLD)/etags"
+
+# Files to compile before others during a bootstrap. This is done to
+# speed up the bootstrap process. The CC files are compiled first
+# because CC mode tweaks the compilation process, and requiring
+# cc-mode when it is not compiled doesn't work during the
+# bootstrapping.
+
+COMPILE_FIRST = \
+ $(lisp)/emacs-lisp/byte-opt.el \
+ $(lisp)/emacs-lisp/bytecomp.el \
+ $(lisp)/subr.el \
+ $(lisp)/progmodes/cc-mode.el \
+ $(lisp)/progmodes/cc-vars.el
+
+# The actual Emacs command run in the targets below.
+
+emacs = $(EMACS) $(EMACSOPT)
+
+# Common command to find subdirectories
+
+setwins=subdirs=`find $$wd -type d -print`; \
+ for file in $$subdirs; do \
+ case $$file in */Old | */RCS | */CVS | */CVS/* | */=* ) ;; \
+ *) wins="$$wins $$file" ;; \
+ esac; \
+ done
+
+# Have to define the list of subdirs manually when not using sh.
+WINS=\
+ calc \
+ calendar \
+ emacs-lisp \
+ emulation \
+ erc \
+ eshell \
+ gnus \
+ international \
+ language \
+ mail \
+ mh-e \
+ net \
+ obsolete \
+ play \
+ progmodes \
+ term \
+ textmodes \
+ url
+
+doit:
+
+$(lisp)/cus-load.el:
+ touch $@
+# WARNING: Do NOT split the part inside $(ARGQUOTE)s into multiple lines as
+# this can break with GNU Make 3.81 and later if sh.exe is used.
+custom-deps: $(lisp)/cus-load.el doit
+ @echo Directories: $(WINS)
+ -$(emacs) -l cus-dep --eval $(ARGQUOTE)(setq find-file-hook nil)$(ARGQUOTE) -f custom-make-dependencies $(lisp) $(WINS)
+
+finder-data: doit
+ @echo Directories: $(WINS)
+ $(emacs) -l finder -f finder-compile-keywords-make-dist $(lisp) $(WINS)
+
+$(lisp)/loaddefs.el:
+ $(MAKE) $(MFLAGS) loaddefs.el-$(SHELLTYPE)
+ cp loaddefs.el-$(SHELLTYPE) $@
+ rm loaddefs.el-$(SHELLTYPE)
+
+loaddefs.el-SH:
+ echo ";;; loaddefs.el --- automatically extracted autoloads" > $@
+ echo ";;" >> $@; echo ";;; Code:" >> $@
+ echo "(autoload 'define-minor-mode \"easy-mmode\")" >>$@
+ echo "(autoload 'define-ccl-program \"ccl\")" >>$@
+ echo "(autoload 'regexp-opt \"regexp-opt\")" >>$@
+ echo "(autoload 'string-to-list \"mule-util\")" >>$@
+ echo "(autoload 'define-derived-mode \"derived\")" >>$@
+ echo "(autoload 'encoded-kbd-mode \"encoded-kb\")" >>$@
+ echo "(defvar cvs-global-menu nil)" >>$@
+ echo "\f" >> $@
+ echo ";;; Local Variables:" >> $@
+ echo ";;; version-control: never" >> $@
+ echo ";;; no-byte-compile: t" >> $@
+ echo ";;; no-update-autoloads: t" >> $@
+ echo ";;; End:" >> $@
+ echo ";;; loaddefs.el ends here" >> $@
+
+loaddefs.el-CMD:
+ echo ;;; loaddefs.el --- automatically extracted autoloads> $@
+ echo ;;; Code:>> $@
+ echo (autoload 'define-minor-mode "easy-mmode")>> $@
+ echo (autoload 'define-ccl-program "ccl")>> $@
+ echo (autoload 'regexp-opt "regexp-opt")>> $@
+ echo (autoload 'string-to-list "mule-util")>> $@
+ echo (autoload 'define-derived-mode "derived")>> $@
+ echo (autoload 'encoded-kbd-mode "encoded-kb")>> $@
+ echo (defvar cvs-global-menu nil)>> $@
+ echo.\f>> $@
+ echo ;;; Local Variables:>> $@
+ echo ;;; version-control: never>> $@
+ echo ;;; no-byte-compile: t>> $@
+ echo ;;; no-update-autoloads: t>> $@
+ echo ;;; End:>> $@
+ echo ;;; loaddefs.el ends here>> $@
+
+# Use . instead of $(lisp) because $(lisp) is an absolute file name,
+# including a drive letter and any leading directories, so the generated
+# loaddefs.el will mention file names that on other machine reference
+# possibly non-existent directories.
+#
+# WARNING: Do NOT split the part inside $(ARGQUOTE)s into multiple lines as
+# this can break with GNU Make 3.81 and later if sh.exe is used.
+autoloads: $(lisp)/loaddefs.el doit
+ @echo Directories: . $(WINS)
+ $(emacs) -l autoload \
+ --eval $(ARGQUOTE)(setq find-file-hook nil find-file-suppress-same-file-warnings t)$(ARGQUOTE) \
+ -f w32-batch-update-autoloads "$(lisp)/loaddefs.el" . $(WINS)
+
+$(lisp)/subdirs.el:
+ $(MAKE) $(MFLAGS) update-subdirs
+
+# Need separate version for sh and native cmd.exe
+update-subdirs: update-subdirs-$(SHELLTYPE)
+
+update-subdirs-CMD: doit
+ echo ;; -*- no-byte-compile: t -*-> $(lisp)/subdirs.el
+ echo ;; In load-path, after this directory should come>> $(lisp)/subdirs.el
+ echo ;; certain of its subdirectories. Here we specify them.>> $(lisp)/subdirs.el
+ echo (normal-top-level-add-to-load-path $(SQUOTE)(>> $(lisp)/subdirs.el
+ @for %%d in ($(WINS)) do if not (%%d)==(term) echo "%%d">> $(lisp)/subdirs.el
+ echo ))>> $(lisp)/subdirs.el
+
+update-subdirs-SH: doit
+ $(srcdir)/update-subdirs $(lisp); \
+ for file in $(WINS); do \
+ $(srcdir)/update-subdirs $$file; \
+ done;
+
+updates: update-subdirs autoloads mh-autoloads finder-data custom-deps
+
+# This is useful after "cvs up".
+cvs-update: recompile autoloads finder-data custom-deps
+
+# Update the AUTHORS file.
+
+update-authors:
+ $(emacs) -l authors -f batch-update-authors $(srcdir)/AUTHORS $(srcdir)
+
+TAGS: $(lisptagsfiles1) $(lisptagsfiles2)
+ $(ETAGS) $(lisptagsfiles1) $(lisptagsfiles2)
+
+TAGS-LISP: $(lisptagsfiles1) $(lisptagsfiles2)
+ $(ETAGS) -o TAGS-LISP $(lisptagsfiles1) $(lisptagsfiles2)
+
+.SUFFIXES: .elc .el
+
+.el.elc:
+ -$(emacs) -f batch-byte-compile $<
+
+# Compile all Lisp files, but don't recompile those that are up to
+# date. Some files don't actually get compiled because they set the
+# local variable no-byte-compile.
+
+# All .elc files are made writable before compilation in case we
+# checked out read-only (CVS option -r). Files MUST be compiled one by
+# one. If we compile several files in a row we can't make sure that
+# the compilation environment is clean. We also set the load-path of
+# the Emacs used for compilation to the current directory and its
+# subdirectories, to make sure require's and load's in the files being
+# compiled find the right files.
+
+# Need separate version for sh and native cmd.exe
+compile: $(lisp)/subdirs.el mh-autoloads compile-$(SHELLTYPE) doit
+
+compile-CMD:
+# -for %%f in ($(lisp) $(WINS)) do for %%g in (%%f\*.elc) do @attrib -r %%g
+ for %%f in ($(COMPILE_FIRST)) do \
+ $(emacs) -l loaddefs -f batch-byte-compile-if-not-done %%f
+ for %%f in (. $(WINS)) do for %%g in (%%f/*.el) do \
+ $(emacs) -l loaddefs -f batch-byte-compile-if-not-done %%f/%%g
+
+compile-SH:
+# for elc in $(lisp)/*.elc $(lisp)/*/*.elc; do attrib -r $$elc; done
+ for el in $(COMPILE_FIRST); do \
+ echo Compiling $$el; \
+ $(emacs) -l loaddefs -f batch-byte-compile-if-not-done $$el; \
+ done
+ for dir in $(lisp) $(WINS); do \
+ for el in $$dir/*.el; do \
+ if test -f $$el; \
+ then \
+ echo Compiling $$el; \
+ $(emacs) -l loaddefs -f batch-byte-compile-if-not-done $$el; \
+ fi \
+ done; \
+ done
+
+# Compile all Lisp files. This is like `compile' but compiles files
+# unconditionally. Some files don't actually get compiled because they
+# set the local variable no-byte-compile.
+
+compile-always: $(lisp)/subdirs.el compile-always-$(SHELLTYPE) doit
+
+compile-always-CMD:
+# -for %%f in ($(lisp) $(WINS)) do for %%g in (%%f\*.elc) do @attrib -r %%g
+ for %%f in ($(COMPILE_FIRST)) do $(emacs) -f batch-byte-compile %%f
+ for %%f in (. $(WINS)) do for %%g in (%%f/*.el) do $(emacs) -f batch-byte-compile %%f/%%g
+
+compile-always-SH:
+# for elc in $(lisp)/*.elc $(lisp)/*/*.elc; do attrib -r $$elc; done
+ for el in $(COMPILE_FIRST); do \
+ echo Compiling $$el; \
+ $(emacs) -f batch-byte-compile $$el || exit 1; \
+ done
+ for dir in $(lisp) $(WINS); do \
+ for el in $$dir/*.el; do \
+ echo Compiling $$el; \
+ $(emacs) -f batch-byte-compile $$el || exit 1; \
+ done; \
+ done
+
+compile-calc: compile-calc-$(SHELLTYPE)
+
+compile-calc-CMD:
+ for %%f in ($(lisp)/calc/*.el) do $(emacs) -f batch-byte-compile %%f
+
+compile-calc-SH:
+ for el in $(lisp)/calc/*.el; do \
+ echo Compiling $$el; \
+ $(emacs) -f batch-byte-compile $$el || exit 1; \
+ done
+
+# Backup compiled Lisp files in elc.tar.gz. If that file already
+# exists, make a backup of it.
+
+backup-compiled-files:
+ -mv $(lisp)/elc.tar.gz $(lisp)/elc.tar.gz~
+ -tar czf $(lisp)/elc.tar.gz $(lisp)/*.elc $(lisp)/*/*.elc
+
+# Compile Lisp files, but save old compiled files first.
+
+compile-after-backup: backup-compiled-files compile-always
+
+# Recompile all Lisp files which are newer than their .elc files.
+# Note that this doesn't create .elc files. It only recompiles if an
+# .elc is present.
+# WARNING: Do NOT split the part inside $(ARGQUOTE)s into multiple lines as
+# this can break with GNU Make 3.81 and later if sh.exe is used.
+recompile: mh-autoloads doit $(lisp)/progmodes/cc-mode.elc
+ $(emacs) --eval $(ARGQUOTE)(batch-byte-recompile-directory 0)$(ARGQUOTE) $(lisp)
+
+# Update MH-E internal autoloads. These are not to be confused with
+# the autoloads for the MH-E entry points, which are already in
+# loaddefs.el.
+MH_E_SRC = $(lisp)/mh-e/mh-acros.el $(lisp)/mh-e/mh-alias.el \
+ $(lisp)/mh-e/mh-buffers.el $(lisp)/mh-e/mh-compat.el \
+ $(lisp)/mh-e/mh-comp.el $(lisp)/mh-e/mh-e.el \
+ $(lisp)/mh-e/mh-folder.el $(lisp)/mh-e/mh-funcs.el \
+ $(lisp)/mh-e/mh-gnus.el $(lisp)/mh-e/mh-identity.el \
+ $(lisp)/mh-e/mh-inc.el $(lisp)/mh-e/mh-junk.el \
+ $(lisp)/mh-e/mh-letter.el $(lisp)/mh-e/mh-limit.el \
+ $(lisp)/mh-e/mh-mime.el $(lisp)/mh-e/mh-print.el \
+ $(lisp)/mh-e/mh-scan.el $(lisp)/mh-e/mh-search.el \
+ $(lisp)/mh-e/mh-seq.el $(lisp)/mh-e/mh-show.el \
+ $(lisp)/mh-e/mh-speed.el $(lisp)/mh-e/mh-thread.el \
+ $(lisp)/mh-e/mh-tool-bar.el $(lisp)/mh-e/mh-utils.el \
+ $(lisp)/mh-e/mh-xface.el
+
+mh-autoloads: $(lisp)/mh-e/mh-loaddefs.el
+$(lisp)/mh-e/mh-loaddefs.el: $(MH_E_SRC)
+ $(MAKE) $(MFLAGS) pre-mh-loaddefs.el-$(SHELLTYPE)
+ cp pre-mh-loaddefs.el-$(SHELLTYPE) $@
+ rm pre-mh-loaddefs.el-$(SHELLTYPE)
+ $(EMACS) $(EMACSOPT) \
+ -l autoload \
+ --eval "(setq generate-autoload-cookie \";;;###mh-autoload\")" \
+ --eval "(setq find-file-suppress-same-file-warnings t)" \
+ --eval "(setq make-backup-files nil)" \
+ -f w32-batch-update-autoloads \
+ "$(lisp)/mh-e/mh-loaddefs.el" $(lisp)/mh-e
+
+pre-mh-loaddefs.el-SH:
+ echo ";;; mh-loaddefs.el --- automatically extracted autoloads" > $@
+ echo ";;" >> $@
+ echo ";; Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc." >> $@
+ echo ";; Author: Bill Wohler <wohler@newt.com>" >> $@
+ echo ";; Keywords: mail" >> $@
+ echo ";;; Commentary:" >> $@
+ echo ";;; Change Log:" >> $@
+ echo ";;; Code:" >> $@
+ echo "\f" >> $@
+ echo "(provide 'mh-loaddefs)" >> $@
+ echo ";; Local Variables:" >> $@
+ echo ";; version-control: never" >> $@
+ echo ";; no-byte-compile: t" >> $@
+ echo ";; no-update-autoloads: t" >> $@
+ echo ";; End:" >> $@
+ echo ";;; mh-loaddefs.el ends here" >> $@
+
+pre-mh-loaddefs.el-CMD:
+ echo ;;; mh-loaddefs.el --- automatically extracted autoloads> $@
+ echo ;;>> $@
+ echo ;; Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.>> $@
+ echo ;; Author: Bill Wohler (wohler@newt.com)>> $@
+ echo ;; Keywords: mail>> $@
+ echo ;;; Commentary:>> $@
+ echo ;;; Change Log:>> $@
+ echo ;;; Code:>> $@
+ echo.\f>> $@
+ echo (provide 'mh-loaddefs)>> $@
+ echo ;; Local Variables:>> $@
+ echo ;; version-control: never>> $@
+ echo ;; no-byte-compile: t>> $@
+ echo ;; no-update-autoloads: t>> $@
+ echo ;; End:>> $@
+ echo ;;; mh-loaddefs.el ends here>> $@
+
+# Prepare a bootstrap in the lisp subdirectory.
+#
+# Build loaddefs.el to make sure it's up-to-date. If it's not, that
+# might lead to errors during the bootstrap because something fails to
+# autoload as expected. If there is no emacs binary, then we can't
+# build autoloads yet. In that case we have to use ldefs-boot.el;
+# bootstrap should always work with ldefs-boot.el. (Because
+# loaddefs.el is an automatically generated file, we don't want to
+# store it in the source repository).
+#
+# Remove compiled Lisp files so that bootstrap-emacs will be built from
+# sources only.
+
+# Need separate version for sh and native cmd.exe
+bootstrap-clean: bootstrap-clean-$(SHELLTYPE) $(lisp)/loaddefs.el
+
+bootstrap-clean-CMD:
+# if exist $(EMACS) $(MAKE) $(MFLAGS) autoloads
+ cp $(lisp)/ldefs-boot.el $(lisp)/loaddefs.el
+ -for %%f in (. $(WINS)) do for %%g in (%%f\*.elc) do @$(DEL) %%g
+
+bootstrap-clean-SH:
+# if test -f $(EMACS); then $(MAKE) $(MFLAGS) autoloads; fi
+# -rm -f $(lisp)/*.elc $(lisp)/*/*.elc
+ cp $(lisp)/ldefs-boot.el $(lisp)/loaddefs.el
+ -for dir in . $(WINS); do rm -f $$dir/*.elc; done
+
+# Generate/update files for the bootstrap process.
+# When done, remove bootstrap-emacs from ../bin, so that
+# it will not be mistaken for an installed binary.
+
+bootstrap: update-subdirs autoloads mh-autoloads compile finder-data custom-deps
+ - $(DEL) $(EMACS)
#
# Assuming INSTALL_DIR is defined, copy the elisp files to it
#ifdef COPY_LISP_SOURCE
$(IFNOTSAMEDIR) $(CP_DIR) . "$(INSTALL_DIR)/lisp" $(ENDIF)
#else
- $(IFNOTSAMEDIR) $(CP_DIR) *.elc "$(INSTALL_DIR)/lisp" $(ENDIF)
- $(IFNOTSAMEDIR) $(CP) cus-load.el "$(INSTALL_DIR)/lisp" $(ENDIF)
- $(IFNOTSAMEDIR) $(CP) forms*.el "$(INSTALL_DIR)/lisp" $(ENDIF)
- $(IFNOTSAMEDIR) $(CP) patcomp.el "$(INSTALL_DIR)/lisp" $(ENDIF)
- $(IFNOTSAMEDIR) $(CP) subdirs.el "$(INSTALL_DIR)/lisp" $(ENDIF)
- $(IFNOTSAMEDIR) $(CP) version.el "$(INSTALL_DIR)/lisp" $(ENDIF)
- $(IFNOTSAMEDIR) $(CP) mail/blessmail.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
- $(IFNOTSAMEDIR) $(CP) mail/sc.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
- $(IFNOTSAMEDIR) $(CP) play/bruce.el "$(INSTALL_DIR)/lisp/play" $(ENDIF)
- $(IFNOTSAMEDIR) $(CP) international/latin-*.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
- $(IFNOTSAMEDIR) $(CP) international/mule-conf.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
+# $(IFNOTSAMEDIR) $(CP_DIR) *.elc "$(INSTALL_DIR)/lisp" $(ENDIF)
+# $(IFNOTSAMEDIR) $(CP) cus-load.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+# $(IFNOTSAMEDIR) $(CP) forms*.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+# $(IFNOTSAMEDIR) $(CP) patcomp.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+# $(IFNOTSAMEDIR) $(CP) subdirs.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+# $(IFNOTSAMEDIR) $(CP) version.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+# $(IFNOTSAMEDIR) $(CP) mail/blessmail.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
+# $(IFNOTSAMEDIR) $(CP) mail/sc.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
+# $(IFNOTSAMEDIR) $(CP) play/bruce.el "$(INSTALL_DIR)/lisp/play" $(ENDIF)
+# $(IFNOTSAMEDIR) $(CP) international/latin-*.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
+# $(IFNOTSAMEDIR) $(CP) international/mule-conf.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
+#endif
- $(DEL) ../same-dir.tst
- $(DEL) "$(INSTALL_DIR)/same-dir.tst"
-#endif
#
# Maintenance
-#
+#
clean:
- $(DEL) *~