X-Git-Url: https://code.delx.au/gnu-emacs/blobdiff_plain/031317994b0d9f02e3e5dfd06a6385479e197dfe..0578dead3a18ccc5419db3d1d5bb4db43165bd44:/lisp/disp-table.el

diff --git a/lisp/disp-table.el b/lisp/disp-table.el
index 9b275cbca0..87781f5f8a 100644
--- a/lisp/disp-table.el
+++ b/lisp/disp-table.el
@@ -1,12 +1,17 @@
-;;; disp-table.el --- functions for dealing with char tables.
+;;; disp-table.el --- functions for dealing with char tables
 
-;; Copyright (C) 1987 Free Software Foundation, Inc.
+;; Copyright (C) 1987, 94, 95, 1999, 2004  Free Software Foundation, Inc.
+
+;; Author: Erik Naggum <erik@naggum.no>
+;; Based on a previous version by Howard Gayle
+;; Maintainer: FSF
+;; Keywords: i18n
 
 ;; This file is part of GNU Emacs.
 
 ;; GNU Emacs is free software; you can redistribute it and/or modify
 ;; it under the terms of the GNU General Public License as published by
-;; the Free Software Foundation; either version 1, or (at your option)
+;; the Free Software Foundation; either version 2, or (at your option)
 ;; any later version.
 
 ;; GNU Emacs is distributed in the hope that it will be useful,
@@ -15,100 +20,222 @@
 ;; GNU General Public License for more details.
 
 ;; You should have received a copy of the GNU General Public License
-;; along with GNU Emacs; see the file COPYING.  If not, write to
-;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+;; along with GNU Emacs; see the file COPYING.  If not, write to the
+;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+;; Boston, MA 02111-1307, USA.
 
+;;; Commentary:
 
-;; Written by Howard Gayle.
+;;; Code:
 
-(defun rope-to-vector (rope)
-  (let* ((len (/ (length rope) 2))
-	 (vector (make-vector len nil))
-	 (i 0))
-    (while (< i len)
-      (aset vector i (rope-elt rope i))
-      (setq i (1+ i)))))
+(put 'display-table 'char-table-extra-slots 6)
 
-(defun describe-display-table (DT)
+;;;###autoload
+(defun make-display-table ()
+  "Return a new, empty display table."
+  (make-char-table 'display-table nil))
+
+(or standard-display-table
+    (setq standard-display-table (make-display-table)))
+
+;;; Display-table slot names.  The property value says which slot.
+
+(put 'truncation 'display-table-slot 0)
+(put 'wrap 'display-table-slot 1)
+(put 'escape 'display-table-slot 2)
+(put 'control 'display-table-slot 3)
+(put 'selective-display 'display-table-slot 4)
+(put 'vertical-border 'display-table-slot 5)
+
+;;;###autoload
+(defun display-table-slot (display-table slot)
+  "Return the value of the extra slot in DISPLAY-TABLE named SLOT.
+SLOT may be a number from 0 to 5 inclusive, or a slot name (symbol).
+Valid symbols are `truncation', `wrap', `escape', `control',
+`selective-display', and `vertical-border'."
+  (let ((slot-number
+	 (if (numberp slot) slot
+	   (or (get slot 'display-table-slot)
+	       (error "Invalid display-table slot name: %s" slot)))))
+    (char-table-extra-slot display-table slot-number)))
+
+;;;###autoload
+(defun set-display-table-slot (display-table slot value)
+  "Set the value of the extra slot in DISPLAY-TABLE named SLOT to VALUE.
+SLOT may be a number from 0 to 5 inclusive, or a name (symbol).
+Valid symbols are `truncation', `wrap', `escape', `control',
+`selective-display', and `vertical-border'."
+  (let ((slot-number
+	 (if (numberp slot) slot
+	   (or (get slot 'display-table-slot)
+	       (error "Invalid display-table slot name: %s" slot)))))
+    (set-char-table-extra-slot display-table slot-number value)))
+
+;;;###autoload
+(defun describe-display-table (dt)
   "Describe the display table DT in a help buffer."
   (with-output-to-temp-buffer "*Help*"
     (princ "\nTruncation glyph: ")
-    (prin1 (aref dt 256))
+    (prin1 (display-table-slot dt 'truncation))
     (princ "\nWrap glyph: ")
-    (prin1 (aref dt 257))
+    (prin1 (display-table-slot dt 'wrap))
     (princ "\nEscape glyph: ")
-    (prin1 (aref dt 258))
+    (prin1 (display-table-slot dt 'escape))
     (princ "\nCtrl glyph: ")
-    (prin1 (aref dt 259))
-    (princ "\nSelective display rope: ")
-    (prin1 (rope-to-vector (aref dt 260)))
-    (princ "\nCharacter display ropes:\n")
-    (let ((vector (make-vector 256 nil))
-	  (i 0))
-      (while (< i 256)
-	(aset vector i
-	      (if (stringp (aref dt i))
-		  (rope-to-vector (aref dt i))
-		(aref dt i)))
-	(setq i (1+ i)))
-      (describe-vector vector))
+    (prin1 (display-table-slot dt 'control))
+    (princ "\nSelective display glyph sequence: ")
+    (prin1 (display-table-slot dt 'selective-display))
+    (princ "\nVertical window border glyph: ")
+    (prin1 (display-table-slot dt 'vertical-border))
+    (princ "\nCharacter display glyph sequences:\n")
+    (save-excursion
+      (set-buffer standard-output)
+      (let ((vector (make-vector 256 nil))
+	    (i 0))
+	(while (< i 256)
+	  (aset vector i (aref dt i))
+	  (setq i (1+ i)))
+	(describe-vector vector))
+      (help-mode))
     (print-help-return-message)))
 
+;;;###autoload
 (defun describe-current-display-table ()
-   "Describe the display table in use in the selected window and buffer."
-   (interactive)
-   (describe-display-table
-    (or (window-display-table (selected-window))
-	buffer-display-table
-	standard-display-table)))
-
-(defun make-display-table ()
-  (make-vector 261 nil))
-
+  "Describe the display table in use in the selected window and buffer."
+  (interactive)
+  (let ((disptab (or (window-display-table (selected-window))
+		     buffer-display-table
+		     standard-display-table)))
+    (if disptab
+	(describe-display-table disptab)
+      (message "No display table"))))
+
+;;;###autoload
 (defun standard-display-8bit (l h)
   "Display characters in the range L to H literally."
+  (or standard-display-table
+      (setq standard-display-table (make-display-table)))
   (while (<= l h)
-    (if (and (>= l ?\ ) (< l 127))
-	(if standard-display-table (aset standard-display-table l nil))
-      (or standard-display-table
-	  (setq standard-display-table (make-vector 261 nil)))
-      (aset standard-display-table l l))
+    (aset standard-display-table l (if (or (< l ?\ ) (>= l 127)) (vector l)))
     (setq l (1+ l))))
 
+;;;###autoload
+(defun standard-display-default (l h)
+  "Display characters in the range L to H using the default notation."
+  (or standard-display-table
+      (setq standard-display-table (make-display-table)))
+  (while (<= l h)
+    (if (and (>= l ?\ ) (char-valid-p l))
+	(aset standard-display-table l nil))
+    (setq l (1+ l))))
+
+;; This function does NOT take terminal-dependent escape sequences.
+;; For that, you need to go through create-glyph.  Use one of the
+;; other functions below, or roll your own.
+;;;###autoload
 (defun standard-display-ascii (c s)
-  "Display character C using string S."
+  "Display character C using printable string S."
   (or standard-display-table
-      (setq standard-display-table (make-vector 261 nil)))
-  (aset standard-display-table c (apply 'make-rope (append s nil))))
+      (setq standard-display-table (make-display-table)))
+  (aset standard-display-table c (vconcat s)))
 
+;;;###autoload
 (defun standard-display-g1 (c sc)
-  "Display character C as character SC in the g1 character set."
+  "Display character C as character SC in the g1 character set.
+This function assumes that your terminal uses the SO/SI characters;
+it is meaningless for an X frame."
+  (if (memq window-system '(x w32))
+      (error "Cannot use string glyphs in a windowing system"))
   (or standard-display-table
-      (setq standard-display-table (make-vector 261 nil)))
+      (setq standard-display-table (make-display-table)))
   (aset standard-display-table c
-	(make-rope (create-glyph (concat "\016" (char-to-string sc) "\017")))))
+	(vector (create-glyph (concat "\016" (char-to-string sc) "\017")))))
 
+;;;###autoload
 (defun standard-display-graphic (c gc)
-  "Display character C as character GC in graphics character set."
+  "Display character C as character GC in graphics character set.
+This function assumes VT100-compatible escapes; it is meaningless for an
+X frame."
+  (if (memq window-system '(x w32))
+      (error "Cannot use string glyphs in a windowing system"))
   (or standard-display-table
-      (setq standard-display-table (make-vector 261 nil)))
+      (setq standard-display-table (make-display-table)))
   (aset standard-display-table c
-	(make-rope (create-glyph (concat "\e(0" (char-to-string gc) "\e(B")))))
+	(vector (create-glyph (concat "\e(0" (char-to-string gc) "\e(B")))))
 
+;;;###autoload
 (defun standard-display-underline (c uc)
   "Display character C as character UC plus underlining."
   (or standard-display-table
-      (setq standard-display-table (make-vector 261 nil)))
+      (setq standard-display-table (make-display-table)))
   (aset standard-display-table c
-	(make-rope (create-glyph (concat "\e[4m" (char-to-string uc) "\e[m")))))
+	(vector
+	 (if window-system
+	     (logior uc (lsh (face-id 'underline) 19))
+	   (create-glyph (concat "\e[4m" (char-to-string uc) "\e[m"))))))
 
-;; Allocate a glyph code to display by sending STRING to the terminal.
+;;;###autoload
 (defun create-glyph (string)
+  "Allocate a glyph code to display by sending STRING to the terminal."
   (if (= (length glyph-table) 65536)
       (error "No free glyph codes remain"))
+  ;; Don't use slots that correspond to ASCII characters.
+  (if (= (length glyph-table) 32)
+      (setq glyph-table (vconcat glyph-table (make-vector 224 nil))))
   (setq glyph-table (vconcat glyph-table (list string)))
   (1- (length glyph-table)))
 
+;;;###autoload
+(defun standard-display-european (arg)
+  "Semi-obsolete way to toggle display of ISO 8859 European characters.
+
+This function is semi-obsolete; if you want to do your editing with
+unibyte characters, it is better to `set-language-environment' coupled
+with either the `--unibyte' option or the EMACS_UNIBYTE environment
+variable, or else customize `enable-multibyte-characters'.
+
+With prefix argument, this command enables European character display
+if arg is positive, disables it otherwise.  Otherwise, it toggles
+European character display.
+
+When this mode is enabled, characters in the range of 160 to 255
+display not as octal escapes, but as accented characters.  Codes 146
+and 160 display as apostrophe and space, even though they are not the
+ASCII codes for apostrophe and space.
+
+Enabling European character display with this command noninteractively
+from Lisp code also selects Latin-1 as the language environment, and
+selects unibyte mode for all Emacs buffers \(both existing buffers and
+those created subsequently).  This provides increased compatibility
+for users who call this function in `.emacs'."
+
+  (if (or (<= (prefix-numeric-value arg) 0)
+	  (and (null arg)
+	       (char-table-p standard-display-table)
+	       ;; Test 161, because 160 displays as a space.
+	       (equal (aref standard-display-table 161) [161])))
+      (progn
+	(standard-display-default 160 255)
+	(unless (or (memq window-system '(x w32)))
+	  (and (terminal-coding-system)
+	       (set-terminal-coding-system nil))))
+    ;; Turn off multibyte chars for more compatibility.
+    (setq-default enable-multibyte-characters nil)
+
+    ;; Switch to Latin-1 language environment
+    ;; unless some other has been specified.
+    (if (equal current-language-environment "English")
+	(set-language-environment "latin-1"))
+    (unless (or noninteractive (memq window-system '(x w32)))
+      ;; Send those codes literally to a character-based terminal.
+      ;; If we are using single-byte characters,
+      ;; it doesn't matter which coding system we use.
+      (set-terminal-coding-system
+       (let ((c (intern (downcase current-language-environment))))
+	 (if (coding-system-p c) c 'latin-1))))
+    (standard-display-european-internal)))
+
 (provide 'disp-table)
 
+;;; arch-tag: ffe4c28c-960c-47aa-b8a8-ae89d371ffc7
 ;;; disp-table.el ends here