X-Git-Url: https://code.delx.au/gnu-emacs/blobdiff_plain/08564963293aac2ea90a3dee54f48ded962238eb..9c85ef9fe1dfc4f825647670f46ad21b8501bf0a:/Makefile.in diff --git a/Makefile.in b/Makefile.in index cd084aa62d..101b7d6eeb 100644 --- a/Makefile.in +++ b/Makefile.in @@ -1,179 +1,541 @@ -# This is the distribution Makefile for Emacs. configure can make -# most of the changes to this file you might want, so try that first. - -# make all to compile and build Emacs -# make install to install it -# make install.sysv to install on system V. -# make install.xenix to install on Xenix -# make install.aix to install on AIX. -# make tags to update tags tables +# DIST: This is the distribution Makefile for Emacs. configure can +# DIST: make most of the changes to this file you might want, so try +# DIST: that first. + +# make all to compile and build Emacs. +# make install to install it. +# make TAGS to update tags tables. +# +# make clean or make mostlyclean +# Delete all files from the current directory that are normally +# created by building the program. Don't delete the files that +# record the configuration. Also preserve files that could be made +# by building, but normally aren't because the distribution comes +# with them. # -# make distclean to delete everything that wasn't in the distribution -# This is a very dangerous thing to do! -# make clean -# This is a little less dangerous. +# Delete `.dvi' files here if they are not part of the distribution. +# +# make distclean +# Delete all files from the current directory that are created by +# configuring or building the program. If you have unpacked the +# source and built the program without creating any other files, +# `make distclean' should leave only the files that were in the +# distribution. +# +# make realclean +# Delete everything from the current directory that can be +# reconstructed with this Makefile. This typically includes +# everything deleted by distclean, plus more: C source files +# produced by Bison, tags tables, info files, and so on. +# +# make extraclean +# Still more severe - delete backup and autosave files, too. SHELL = /bin/sh +MAKE = make # BSD doesn't have it as a default. + +# ==================== Things `configure' Might Edit ==================== + +CC=@CC@ +CPP=@CPP@ +C_SWITCH_SYSTEM=@c_switch_system@ +ALLOCA=@ALLOCA@ +LN_S=@LN_S@ +CFLAGS=@CFLAGS@ +C_SWITCH_X_SITE=@C_SWITCH_X_SITE@ +LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@ +YACC=@YACC@ + +### These help us choose version- and architecture-specific directories +### to install files in. + +### This should be the number of the Emacs version we're building, +### like `18.59' or `19.0'. +version=@version@ + +### This should be the name of the configuration we're building Emacs +### for, like `mips-dec-ultrix' or `sparc-sun-sunos'. +configuration=@configuration@ + +### Libraries which should be edited into lib-src/Makefile. +libsrc_libs=@libsrc_libs@ + +# ==================== Where To Install Things ==================== + +# The default location for installation. Everything is placed in +# subdirectories of this directory. The default values for many of +# the variables below are expressed in terms of this one, so you may +# not need to change them. This defaults to /usr/local. +prefix=@prefix@ + +# Like `prefix', but used for architecture-specific files. +exec_prefix=@exec_prefix@ + +# Where to install Emacs and other binaries that people will want to +# run directly (like etags). +bindir=${exec_prefix}/bin -# ==================== Where to install things ==================== -# Note that on system V you must change MANDIR to /usr/local/man/man1. +# Where to install architecture-independent data files. ${lispdir} +# and ${etcdir} are subdirectories of this. +datadir=${prefix}/lib -# Where to install all of Emacs's data files - the lisp code, -# documentation tree, and the architecture-dependent and -independent -# libraries. If this is not the directory we're building under -# already, the `install' targets will move or copy it there. The -# default definitions for the variables below are expressed in terms -# of this one, so you may not need to change them. -LIBROOT=/home/gd/gnu/emacs +# Where to install and expect the files that Emacs modifies as it +# runs. These files are all architecture-independent. Right now, the +# only such data is the locking directory; ${lockdir} is a +# subdirectory of this. +statedir=${prefix}/lib -# This is where the `install' make target should place the binaries -# people will want to run directly (like etags and Emacs itself). -INSTALLBIN=/usr/local/bin +# Where to install and expect executable files to be run by Emacs +# rather than directly by users, and other architecture-dependent +# data. ${archlibdir} is a subdirectory of this. +libdir=${exec_prefix}/lib -# Emacs will search this path to find its elisp files. This should be -# a colon-separated list of directories. Strictly speaking, all the -# elisp files should go under DATADIR (below), since both elisp source -# and compiled elisp are completely portable, but it's traditional to -# give the lisp files their own subdirectory. -LISPPATH=/home/gd/gnu/emacs/local-lisp:/home/gd/gnu/emacs/lisp +# Where to install Emacs's man pages, and what extension they should have. +mandir=${prefix}/man/man1 +manext=.1 -# Emacs will look here for its architecture-independent files (like -# the tutorial and the zippy database). -DATADIR=/home/gd/gnu/emacs/etc +# Where to install and expect the info files describing Emacs. In the +# past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but +# since there are now many packages documented with the texinfo +# system, it is inappropriate to imply that it is part of Emacs. +infodir=${prefix}/info -# Emacs will look here for its architecture-dependent files, like -# executables for its utilities. -LIBDIR=/home/gd/gnu/emacs/arch-lib +# Where to find the source code. The source code for Emacs's C kernel is +# expected to be in ${srcdir}/src, and the source code for Emacs's +# utility programs is expected to be in ${srcdir}/lib-src. This is +# set by the configure script's `--srcdir' option. +srcdir=@srcdir@ -# The locking directory, where the Emacs locking code keeps track of -# which files are currently being edited. -LOCKDIR=/home/gd/gnu/emacs/lock +# ==================== Emacs-specific directories ==================== -# This is where the `install' make target should place the man pages -# for the binaries it installs. -MANDIR= /usr/man/man1 +# These variables hold the values Emacs will actually use. They are +# based on the values of the standard Make variables above. +@inst_paths@# Where to install the lisp files distributed with +@inst_paths@# Emacs. This includes the Emacs version, so that the +@inst_paths@# lisp files for different versions of Emacs will install +@inst_paths@# themselves in separate directories. +@inst_paths@lispdir=${datadir}/emacs/${version}/lisp +@inst_paths@# Directories Emacs should search for lisp files specific +@inst_paths@# to this site (i.e. customizations), before consulting +@inst_paths@# ${lispdir}. This should be a colon-separated list of +@inst_paths@# directories. +@inst_paths@locallisppath=${datadir}/emacs/site-lisp + +# Where Emacs will search to find its lisp files. Before +# changing this, check to see if your purpose wouldn't +# better be served by changing locallisppath. This +# should be a colon-separated list of directories. +lisppath=${locallisppath}:${lispdir} + +# Where Emacs will search for its lisp files while +# building. This is only used during the process of +# compiling Emacs, to help Emacs find its lisp files +# before they've been installed in their final location. +# It's usually identical to lisppath, except that the +# entry for the directory containing the installed lisp +# files has been replaced with ../lisp. This should be a +# colon-separated list of directories. +buildlisppath=${srcdir}/lisp + +@inst_paths@# Where to install the other architecture-independent +@inst_paths@# data files distributed with Emacs (like the tutorial, +@inst_paths@# the cookie recipes and the Zippy database). This path +@inst_paths@# usually contains the Emacs version number, so the data +@inst_paths@# files for multiple versions of Emacs may be installed +@inst_paths@# at once. +@inst_paths@etcdir=${datadir}/emacs/${version}/etc + +@inst_paths@# Where to create and expect the locking directory, where +@inst_paths@# the Emacs locking code keeps track of which files are +@inst_paths@# currently being edited. +@inst_paths@lockdir=${statedir}/emacs/lock + +@inst_paths@# Where to put executables to be run by Emacs rather than +@inst_paths@# the user. This path usually includes the Emacs version +@inst_paths@# and configuration name, so that multiple configurations +@inst_paths@# for multiple versions of Emacs may be installed at +@inst_paths@# once. +@inst_paths@archlibdir=${libdir}/emacs/${version}/${configuration} + +# ====================== Developer's configuration ======================= + +# The following assignments make sense if you're running Emacs on a single +# machine, one version at a time, and you want changes to the lisp and etc +# directories in the source tree to show up immediately in your working +# environment. It saves a great deal of disk space by not duplicating the +# lisp and etc directories. + +@rip_paths@lispdir=${srcdir}/lisp +@rip_paths@externallispdir=${srcdir}/externallisp +@rip_paths@locallisppath=${srcdir}/site-lisp:${datadir}/emacs/site-lisp +@rip_paths@etcdir=${srcdir}/etc +@rip_paths@lockdir=${srcdir}/lock +@rip_paths@archlibdir=${srcdir}/lib-src +@rip_paths@infodir=${srcdir}/info + +# ==================== Utility Programs for the Build ==================== + +# Allow the user to specify the install program. +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +# ============================= Targets ============================== # Flags passed down to subdirectory makefiles. -MFLAGS= +MFLAGS = # Subdirectories to make recursively. `lisp' is not included # because the compiled lisp files are part of the distribution # and you cannot remake them without installing Emacs first. -SUBDIR= lib-src src +SUBDIR = lib-src src -# Subdirectories to install -COPYDIR= arch-lib etc info lisp +# The makefiles of the directories in $SUBDIR. +SUBDIR_MAKEFILES = lib-src/Makefile src/Makefile oldXMenu/Makefile -# Subdirectories to clean -CLEANDIR= ${COPYDIR} lisp/term +# Subdirectories to install, and where they'll go. +# lib-src's makefile knows how to install it, so we don't do that here. +# When installing the info files, we need to do special things to +# avoid nuking an existing dir file, so we don't do that here; +# instead, we have written out explicit code in the `install' targets. +COPYDIR = ${srcdir}/etc ${srcdir}/lisp +COPYDESTS = ${etcdir} ${lispdir} all: src/paths.h ${SUBDIR} -src/paths.h: Makefile src/paths.h-dist - /bin/sed < src/paths.h-dist > src/paths.h \ - -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "$(LISPPATH)";' \ - -e 's;\(#.*PATH_EXEC\).*$$;\1 "$(LIBDIR)";' \ - -e 's;\(#.*PATH_DATA\).*$$;\1 "$(DATADIR)";' \ - -e 's;\(#.*PATH_LOCK\).*$$;\1 "$(LOCKDIR)/";' \ - -e 's;\(#.*PATH_SUPERLOCK\).*$$;\1 "$(LOCKDIR)/!!!SuperLock!!!";' +removenullpaths=sed -e 's/^://' -e 's/:$$//' -e 's/::/:/' + +# We force the rebuilding of src/paths.h because the user might give +# make different values for the various directories. Since we use +# move-if-change, src/paths.h only actually changes if the user did +# something notable, so the only unnecessary work we do is in building +# src/paths.h.tmp, which isn't much. +# Note that sed is not in /bin on 386bsd. +src/paths.h: Makefile ${srcdir}/src/paths.h.in FRC.src.paths.h + @echo "Producing \`src/paths.h' from \`src/paths.h.in'." + @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \ + buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \ + sed < ${srcdir}/src/paths.h.in > src/paths.h.tmp \ + -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \ + -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \ + -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \ + -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \ + -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \ + -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') + @${srcdir}/move-if-change src/paths.h.tmp src/paths.h -src: lib-src +src: lib-src FRC.src +lib-src: FRC.lib-src .RECURSIVE: ${SUBDIR} -${SUBDIR}: FRC - cd $@; make ${MFLAGS} all - -install: all mkdir lockdir - -if [ `/bin/pwd` != `(cd ${LIBROOT}; /bin/pwd)` ] ; then \ - tar cf - ${COPYDIR} | (cd ${LIBROOT}; umask 0; tar xf - ) ;\ - for i in ${CLEANDIR}; do \ - (rm -rf ${LIBROOT}/$$i/RCS; \ - rm -f ${LIBROOT}/$$i/\#*; \ - rm -f ${LIBROOT}/$$i/*~); \ - done \ - else true; \ - fi - install -c -s arch-lib/emacsclient ${INSTALLBIN}/emacsclient - install -c -s arch-lib/etags ${INSTALLBIN}/etags - install -c -s arch-lib/ctags ${INSTALLBIN}/ctags - install -c -s -m 1755 src/xemacs ${INSTALLBIN}/xemacs - install -c -m 444 etc/emacs.1 ${MANDIR}/emacs.1 - -rm -f ${INSTALLBIN}/emacs - mv ${INSTALLBIN}/xemacs ${INSTALLBIN}/emacs - -install.sysv: all mkdir lockdir - -if [ `/bin/pwd` != `(cd ${LIBROOT}; /bin/pwd)` ] ; then \ - find ${COPYDIR} -print | cpio -pdum ${LIBROOT} ;\ - for i in ${CLEANDIR}; do \ - (rm -rf ${LIBROOT}/$$i/RCS; \ - rm -f ${LIBROOT}/$$i/\#*; \ - rm -f ${LIBROOT}/$$i/*~); \ - done \ - else true; \ - fi - -cpset arch-lib/emacsclient ${INSTALLBIN}/emacsclient 755 bin bin - -cpset arch-lib/etags ${INSTALLBIN}/etags 755 bin bin - -cpset arch-lib/ctags ${INSTALLBIN}/ctags 755 bin bin - -cpset etc/emacs.1 ${MANDIR}/emacs.1 444 bin bin - -/bin/rm -f ${INSTALLBIN}/emacs - -cpset src/xemacs ${INSTALLBIN}/emacs 1755 bin bin - -install.xenix: all mkdir lockdir - if [ `pwd` != `(cd ${LIBROOT}; pwd)` ] ; then \ - tar cf - ${COPYDIR} | (cd ${LIBROOT}; umask 0; tar xpf - ) ;\ - for i in ${CLEANDIR}; do \ - (rm -rf ${LIBROOT}/$$i/RCS; \ - rm -f ${LIBROOT}/$$i/\#*; \ - rm -f ${LIBROOT}/$$i/*~); \ - done \ - else true; \ - fi - cp arch-lib/etags arch-lib/ctags arch-lib/emacsclient ${INSTALLBIN} - chmod 755 ${INSTALLBIN}/etags ${INSTALLBIN}/ctags ${INSTALLBIN}/emacsclient - cp etc/emacs.1 ${MANDIR}/emacs.1 - chmod 444 ${MANDIR}/emacs.1 - -mv -f ${INSTALLBIN}/emacs ${INSTALLBIN}/emacs.old - cp src/xemacs ${INSTALLBIN}/emacs - chmod 1755 ${INSTALLBIN}/emacs - -rm -f ${INSTALLBIN}/emacs.old - -install.aix: all mkdir lockdir - -if [ `/bin/pwd` != `(cd ${LIBROOT}; /bin/pwd)` ] ; then \ - tar cf - ${COPYDIR} | (cd ${LIBROOT}; umask 0; tar xBf - ) ;\ - for i in ${CLEANDIR}; do \ - (rm -rf ${LIBROOT}/$$i/RCS; \ - rm -f ${LIBROOT}/$$i/\#*; \ - rm -f ${LIBROOT}/$$i/*~); \ - done \ - else true; \ - fi - install -f ${INSTALLBIN} etc/emacsclient - install -f ${INSTALLBIN} etc/etags - install -f ${INSTALLBIN} etc/ctags - install -M 1755 -f ${INSTALLBIN} src/xemacs - install -M 444 -f ${MANDIR} etc/emacs.1 - -rm -f ${INSTALLBIN}/emacs - mv ${INSTALLBIN}/xemacs ${INSTALLBIN}/emacs - -mkdir: FRC - -mkdir ${LIBROOT} - -chmod 777 ${LIBROOT} - -distclean: - for i in ${SUBDIR}; do (cd $$i; make ${MFLAGS} distclean); done - -clean: - cd src; make clean - cd lib-src; make clean - -lockdir: - -mkdir ${LOCKDIR} - -chmod 777 ${LOCKDIR} - -FRC: - -tags: lib-src - cd src; ../arch-lib/etags *.[ch] ../lisp/*.el ../lisp/term/*.el +${SUBDIR}: ${SUBDIR_MAKEFILES} FRC + cd $@; $(MAKE) all ${MFLAGS} \ + CC='${CC}' CFLAGS='${CFLAGS}' MAKE='${MAKE}' \ + prefix='${prefix}' srcdir='${srcdir}/$@' libdir='${libdir}' + +## We build the makefiles for the subdirectories here so that we can +## edit the values for the path variables into them. This means that +## when the user has built them from this makefile once, they will use +## the right default values for the path variables. +lib-src/Makefile: ${srcdir}/lib-src/Makefile.in Makefile + rm -f lib-src/Makefile.tmp + @echo "Producing \`lib-src/Makefile' from \`${srcdir}/lib-src/Makefile.in'." + @(echo "# This file is generated from \`${srcdir}/lib-src/Makefile.in'." ; \ + echo "# If you are thinking about editing it, you should seriously consider" ; \ + echo "# running \`make lib-src/Makefile' at the top of the" ; \ + echo "# Emacs build tree instead, or editing" ; \ + echo "# \`${srcdir}/lib-src/Makefile.in' itself." ; \ + sed < ${srcdir}/lib-src/Makefile.in \ + -e 's|^\(version *=\).*$$|\1'"${version}"'|' \ + -e 's|^\(configname *=\).*$$|\1'"${configuration}"'|' \ + -e 's|^\(prefix *=\).*$$|\1'"${prefix}"'|' \ + -e 's|^\(exec_prefix *=\).*$$|\1'"${exec_prefix}"'|' \ + -e 's|^\(libdir *=\).*$$|\1'"${libdir}"'|' \ + -e 's|^\(srcdir *=\).*$$|\1'"${srcdir}"'/lib-src|' \ + -e 's|^\(VPATH *=\).*$$|\1'"${srcdir}"'/lib-src|' \ + -e 's|^\(archlibdir *=\).*$$|\1'"${archlibdir}"'|' \ + -e 's|^\(ALLOCA *=\).*$$|\1'"${ALLOCA}"'|' \ + -e 's|^\(YACC *=\).*$$|\1'"${YACC}"'|' \ + -e 's|^CC *=.*$$|CC='"${CC}"'|' \ + -e 's|^CFLAGS *=.*$$|CFLAGS='"${CFLAGS}"'|' \ + -e 's|^C_SWITCH_SYSTEM *=.*$$|C_SWITCH_SYSTEM='"${C_SWITCH_SYSTEM}"'|' \ + -e 's|^LOADLIBES *=.*$$|LOADLIBES='"${libsrc_libs}"'|' \ + -e '/^# DIST: /d') > lib-src/Makefile.tmp + @${srcdir}/move-if-change lib-src/Makefile.tmp lib-src/Makefile + chmod -w lib-src/Makefile + +src/Makefile: ${srcdir}/src/Makefile.in Makefile + rm -f src/Makefile.tmp + @echo "Producing \`src/Makefile' from \`${srcdir}/src/Makefile.in'." + @(echo "# This file is generated from \`${srcdir}/src/Makefile.in'." ; \ + echo "# If you are thinking about editing it, you should seriously consider" ; \ + echo "# running \`make src/Makefile' at the top of the" ; \ + echo "# Emacs build tree instead, or editing" ; \ + echo "# \`${srcdir}/src/Makefile.in' itself." ; \ + sed < ${srcdir}/src/Makefile.in \ + -e 's|^\(srcdir *=\).*$$|\1${srcdir}/src|' \ + -e 's|^\(VPATH *=\).*$$|\1${srcdir}/src|' \ + -e 's|^CC *=.*$$|CC=${CC}|' \ + -e 's|^CPP *=.*$$|CPP=${CPP}|' \ + -e 's|^LN_S *=.*$$|LN_S=${LN_S}|' \ + -e 's|^CFLAGS *=.*$$|CFLAGS=${CFLAGS}|' \ + -e 's|^\(C_SWITCH_SYSTEM *=\).*$$|\1'"${C_SWITCH_SYSTEM}"'|' \ + -e 's|^\(LD_SWITCH_X_SITE *=\).*$$|\1${LD_SWITCH_X_SITE}|' \ + -e '/^# DIST: /d') > src/Makefile.tmp + @${srcdir}/move-if-change src/Makefile.tmp src/Makefile + chmod -w src/Makefile + +oldXMenu/Makefile: ${srcdir}/oldXMenu/Makefile.in Makefile + rm -f oldXMenu/Makefile.tmp + @echo "Producing \`oldXMenu/Makefile' from \`${srcdir}/oldXMenu/Makefile.in'." + @(echo "# This file is generated from \`${srcdir}/oldXMenu/Makefile.in'." ; \ + echo "# If you are thinking about editing it, you should seriously consider" ; \ + echo "# running \`make oldXMenu/Makefile' at the top of the" ; \ + echo "# Emacs build tree instead, or editing" ; \ + echo "# \`${srcdir}/oldXMenu/Makefile.in' itself." ; \ + sed < ${srcdir}/oldXMenu/Makefile.in \ + -e 's|^\(srcdir *=\).*$$|\1'"${srcdir}"'/oldXMenu|' \ + -e 's|^\(VPATH *=\).*$$|\1'"${srcdir}"'/oldXMenu|' \ + -e 's|^\(C_SWITCH_X_SITE *=\).*$$|\1'"${C_SWITCH_X_SITE}"'|' \ + -e 's|^CC *=.*$$|CC='"${CC}"'|' \ + -e 's|^DEFS *=.*$$|DEFS='"${DEFS}"'|' \ + -e '/^# DIST: /d') > oldXMenu/Makefile.tmp + @${srcdir}/move-if-change oldXMenu/Makefile.tmp oldXMenu/Makefile + chmod -w oldXMenu/Makefile + +Makefile: + ./config.status + +# ==================== Installation ==================== + +## If we let lib-src do its own installation, that means we +## don't have to duplicate the list of utilities to install in +## this Makefile as well. + +## On AIX, use tar xBf. +## On Xenix, use tar xpf. + +## We delete each directory in ${COPYDESTS} before we copy into it; +## that way, we can reinstall over directories that have been put in +## place with their files read-only (perhaps because they are checked +## into RCS). In order to make this safe, we make sure that the +## source exists and is distinct from the destination. +install: all do-install + +### Note that we copy the DOC-* files from the build etc directory +### as well as lots of things from ${srcdir}/etc. +do-install: mkdir + (cd lib-src; \ + $(MAKE) install ${MFLAGS} prefix=${prefix} \ + exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \ + archlibdir=${archlibdir}) + -set ${COPYDESTS} ; \ + for dir in ${COPYDIR} ; do \ + if [ `(cd $$1 && pwd)` != `(cd $${dir} && pwd)` ] ; then \ + rm -rf $$1 ; \ + fi ; \ + shift ; \ + done + -set ${COPYDESTS} ; \ + mkdir ${COPYDESTS} ; \ + for dir in ${COPYDIR} ; do \ + dest=$$1 ; shift ; \ + [ -d $${dir} ] \ + && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \ + && (echo "Copying $${dir}..." ; \ + (cd $${dir}; tar -cf - . )|(cd $${dest};umask 0; tar -xvf - ); \ + for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ + rm -rf $${subdir}/RCS ; \ + rm -rf $${subdir}/CVS ; \ + rm -f $${subdir}/\#* ; \ + rm -f $${subdir}/*~ ; \ + done) ; \ + done + if [ `(cd ./etc; /bin/pwd)` != `(cd ${srcdir}/etc; /bin/pwd)` ]; \ + then \ + echo "Copying etc/DOC* ..." ; \ + (cd etc; tar -cf - DOC*)|(cd ${etcdir}; umask 0; tar -xvf - ); \ + else true; fi + if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \ + then (cd ${srcdir}/info ; \ + if [ ! -f ${infodir}/dir ] && [ -f dir ]; then \ + ${INSTALL_DATA} dir ${infodir}/dir ; \ + fi ; \ + for f in cl* emacs* forms* info* vip* ; do \ + ${INSTALL_DATA} $$f ${infodir}/$$f ; \ + done); \ + else true; fi + cd ${srcdir}/etc; for page in emacs etags ctags ; do \ + ${INSTALL_DATA} $${page}.1 ${mandir}/$${page}${manext} ; \ + done + ${INSTALL_PROGRAM} src/emacs ${bindir}/emacs-${version} + chmod 1755 ${bindir}/emacs-${version} + rm -f ${bindir}/emacs + ln ${bindir}/emacs-${version} ${bindir}/emacs + +### Build all the directories we're going to install Emacs in. Since +### we may be creating several layers of directories (for example, +### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use make-path +### instead of mkdir. Not all systems' mkdirs have the `-p' flag. +mkdir: FRC.mkdir + ./lib-src/make-path ${COPYDESTS} ${lockdir} ${infodir} ${mandir} \ + ${bindir} ${datadir} ${libdir} \ + `echo ${locallisppath} | sed 's/:/ /'` + chmod 777 ${COPYDESTS} ${lockdir} + +### Delete all the installed files that the `install' target would +### create (but not the noninstalled files such as `make all' would +### create). +### +### Don't delete the lisp and etc directories if they're in the source tree. +uninstall: + (cd lib-src; \ + $(MAKE) ${MFLAGS} uninstall \ + prefix=${prefix} exec_prefix=${exec_prefix} \ + bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir}) + for dir in ${lispdir} ${etcdir} ; do \ + case `(cd $${dir} ; pwd)` in \ + `(cd ${srcdir} ; pwd)`* ) ;; \ + * ) rm -rf $${dir} ;; \ + esac ; \ + case $${dir} in \ + ${datadir}/emacs/${version}/* ) \ + rm -rf ${datadir}/emacs/${version} \ + ;; \ + esac ; \ + done + (cd ${infodir}; rm -f cl* emacs* forms* info* vip*) + (cd ${mandir}; rm -f emacs.1 etags.1 ctags.1) + (cd ${bindir}; rm -f emacs-${version} emacs) + + +### Some makes seem to remember that they've built something called FRC, +### so you can only use a given FRC once per makefile. +FRC FRC.src.paths.h FRC.src FRC.lib-src FRC.mkdir: +FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean: + +# ==================== Cleaning up and miscellanea ==================== + +### `mostlyclean' +### Like `clean', but may refrain from deleting a few files that people +### normally don't want to recompile. For example, the `mostlyclean' +### target for GCC does not delete `libgcc.a', because recompiling it +### is rarely necessary and takes a lot of time. +mostlyclean: FRC.mostlyclean + (cd src; make ${MFLAGS} mostlyclean) + (cd oldXMenu; make ${MFLAGS} mostlyclean) + (cd lib-src; make ${MFLAGS} mostlyclean) + (cd man; make ${MFLAGS} mostlyclean) + +### `clean' +### Delete all files from the current directory that are normally +### created by building the program. Don't delete the files that +### record the configuration. Also preserve files that could be made +### by building, but normally aren't because the distribution comes +### with them. +### +### Delete `.dvi' files here if they are not part of the distribution. +clean: FRC.clean + (cd src; make ${MFLAGS} clean) + (cd oldXMenu; make ${MFLAGS} clean) + (cd lib-src; make ${MFLAGS} clean) + (cd man; make ${MFLAGS} clean) + +### `distclean' +### Delete all files from the current directory that are created by +### configuring or building the program. If you have unpacked the +### source and built the program without creating any other files, +### `make distclean' should leave only the files that were in the +### distribution. +top_distclean=\ + rm -f config.status build-install ; \ + rm -f Makefile ${SUBDIR_MAKEFILES} ; \ + (cd lock ; rm -f *) +distclean: FRC.distclean + (cd src; make ${MFLAGS} distclean) + (cd oldXMenu; make ${MFLAGS} distclean) + (cd lib-src; make ${MFLAGS} distclean) + (cd man; make ${MFLAGS} distclean) + ${top_distclean} + + +### `realclean' +### Delete everything from the current directory that can be +### reconstructed with this Makefile. This typically includes +### everything deleted by distclean, plus more: C source files +### produced by Bison, tags tables, info files, and so on. +### +### One exception, however: `make realclean' should not delete +### `configure' even if `configure' can be remade using a rule in the +### Makefile. More generally, `make realclean' should not delete +### anything that needs to exist in order to run `configure' and then +### begin to build the program. +realclean: FRC.realclean + (cd src; make ${MFLAGS} realclean) + (cd oldXMenu; make ${MFLAGS} realclean) + (cd lib-src; make ${MFLAGS} realclean) + (cd man; make ${MFLAGS} realclean) + ${top_distclean} + +### This doesn't actually appear in the coding standards, but Karl +### says GCC supports it, and that's where the configuration part of +### the coding standards seem to come from. It's like distclean, but +### it deletes backup and autosave files too. +extraclean: + for i in ${SUBDIR}; do (cd $$i; $(MAKE) ${MFLAGS} extraclean); done + -(cd lock; rm *) + -rm config.status config-tmp-* + -rm -f *~ \#* + +### Unlocking and relocking. The idea of these productions is to reduce +### hassles when installing an incremental tar of Emacs. Do `make unlock' +### before unlocking the file to take the write locks off all sources so +### that tar xvof will overwrite them without fuss. Then do `make relock' +### afterward so that VC mode will know which files should be checked in +### if you want to mung them. +### +### Note: it's no disaster if these productions miss a file or two; tar +### and VC will swiftly let you know if this happens, and it is easily +### corrected. +SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \ + README build-install.in configure make-dist move-if-change + +unlock: + chmod u+w $(SOURCES) cpp/* + -(cd elisp; chmod u+w Makefile README *.texi) + (cd etc; make unlock) + (cd lib-src; make unlock) + (cd lisp; make unlock) + (cd lisp/term; chmod u+w README *.el) + (cd man; chmod u+w *texi* ChangeLog split-man) + (cd oldXMenu; chmod u+w *.[ch] Makefile README) + (cd src; make unlock) + +relock: + chmod u-w $(SOURCES) cpp/* + -(cd elisp; chmod u-w Makefile README *.texi) + (cd etc; make relock) + (cd lib-src; make relock) + (cd lisp; make relock) + (cd lisp/term; chmod u+w README *.el) + (cd man; chmod u+w *texi* ChangeLog split-man) + (cd oldXMenu; chmod u+w *.[ch] Makefile README) + (cd src; make relock) + +TAGS tags: lib-src + (cd ${srcdir}/src; \ + ../lib-src/etags *.[ch] ../lisp/*.el ../lisp/term/*.el) + +check: + @echo "We don't have any tests for GNU Emacs yet." + +dist: + cd ${srcdir}; make-dist + +info: + (cd ${srcdir}/man; make ${MFLAGS} info) +dvi: + (cd ${srcdir}/man; make ${MFLAGS} dvi)