X-Git-Url: https://code.delx.au/gnu-emacs/blobdiff_plain/1fb87c7784670dafa3dfb6b2326a5cb8b3f94137..678b159e98ccad4066bdae675bd5b7cc168efd1e:/config.bat

diff --git a/config.bat b/config.bat
index 8f8b4b6629..61f96325a7 100644
--- a/config.bat
+++ b/config.bat
@@ -31,14 +31,19 @@ rem   + rm and mv (from GNU file utilities).
 rem   + sed (you can use the port that comes with DJGPP).
 rem
 rem   You should be able to get all the above utilities from any SimTel
-rem   repository, e.g. ftp.coast.net, in the directories
-rem   "SimTel/vendors/djgpp" and "SimTel/vendors/gnu/gnuish/dos_only".  As
-rem   usual, please use your local mirroring site to reduce trans-Atlantic
-rem   traffic.
+rem   repository, e.g. ftp.simtel.net, in the directory
+rem   "pub/simtelnet/gnu/djgpp/v2gnu".  As usual, please use your local
+rem   mirroring site to reduce trans-Atlantic traffic.
 rem   ----------------------------------------------------------------------
 set X11=
 set nodebug=
 set djgpp_ver=
+if "%1" == "" goto usage
+rem   ----------------------------------------------------------------------
+rem   See if their environment is large enough.  We need 28 bytes.
+set $foo$=789012345678901234567
+if not "%$foo$%" == "789012345678901234567" goto SmallEnv
+set $foo$=
 :again
 if "%1" == "" goto usage
 if "%1" == "--with-x" goto withx
@@ -75,7 +80,7 @@ Goto End
 Echo Checking whether 'mv' is available...
 rm -f junk.1 junk.2
 echo foo >junk.1
-mv junk.1 junk.2
+mv junk.1 ./junk.2
 If Exist junk.2 Goto mvOk
 Echo To configure 'Emacs' you need to have 'mv'!
 rm -f junk.1
@@ -129,7 +134,7 @@ rm -f paths.tmp
 
 rem   Create "config.h"
 rm -f config.h2 config.tmp
-cp config.in config.tmp
+sed -e '' config.in > config.tmp
 if "%X11%" == "" goto src4
 sed -f ../msdos/sed2x.inp <config.in >config.tmp
 :src4
@@ -141,25 +146,25 @@ rem   On my system dir.h gets in the way.  It's a VMS file so who cares.
 if exist dir.h ren dir.h vmsdir.h
 
 rem   Create "makefile" from "makefile.in".
-rm -f makefile junk.c
-sed -e "1,/cpp stuff/s@^# .*$@@" <makefile.in >junk.c
+rm -f Makefile junk.c
+sed -e "1,/cpp stuff/s@^# .*$@@" <Makefile.in >junk.c
 If "%DJGPP_VER%" == "1" Goto mfV1
-gcc -E junk.c | sed -f ../msdos/sed1v2.inp >makefile
+gcc -E junk.c | sed -f ../msdos/sed1v2.inp >Makefile
 goto mfDone
 :mfV1
-gcc -E junk.c | sed -f ../msdos/sed1.inp >makefile
+gcc -E junk.c | sed -f ../msdos/sed1.inp >Makefile
 :mfDone
 rm -f junk.c
 
 if "%X11%" == "" goto src5
-mv makefile makefile.tmp
-sed -f ../msdos/sed1x.inp <makefile.tmp >makefile
+mv Makefile makefile.tmp
+sed -f ../msdos/sed1x.inp <makefile.tmp >Makefile
 rm -f makefile.tmp
 :src5
 
 if "%nodebug%" == "" goto src6
-sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp
-sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >makefile
+sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp
+sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile
 rm -f makefile.tmp
 :src6
 cd ..
@@ -167,18 +172,18 @@ rem   ----------------------------------------------------------------------
 Echo Configuring the library source directory...
 cd lib-src
 rem   Create "makefile" from "makefile.in".
-sed -e "1,/cpp stuff/s@^# .*$@@" <makefile.in >junk.c
+sed -e "1,/cpp stuff/s@^# .*$@@" <Makefile.in >junk.c
 gcc -E -I. -I../src junk.c | sed -e "s/^ /	/" -e "/^#/d" -e "/^[ 	]*$/d" >makefile.new
 If "%DJGPP_VER%" == "2" goto libsrc-v2
-sed -f ../msdos/sed3.inp <makefile.new >makefile
+sed -f ../msdos/sed3.inp <makefile.new >Makefile
 Goto libsrc2
 :libsrc-v2
-sed -f ../msdos/sed3v2.inp <makefile.new >makefile
+sed -f ../msdos/sed3v2.inp <makefile.new >Makefile
 :libsrc2
 rm -f makefile.new junk.c
 if "%nodebug%" == "" goto libsrc3
-sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp
-sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >makefile
+sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp
+sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile
 rm -f makefile.tmp
 :libsrc3
 cd ..
@@ -186,17 +191,23 @@ rem   ----------------------------------------------------------------------
 if "%X11%" == "" goto oldx1
 Echo Configuring the oldxmenu directory...
 cd oldxmenu
-sed -f ../msdos/sed5x.inp <makefile.in >makefile
+sed -f ../msdos/sed5x.inp <Makefile.in >Makefile
 if "%nodebug%" == "" goto oldx2
-sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp
-mv -f makefile.tmp makefile
+sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp
+mv -f makefile.tmp Makefile
 :oldx2
 cd ..
 :oldx1
 rem   ----------------------------------------------------------------------
+Echo Configuring the manual directory...
+cd man
+sed -f ../msdos/sed6.inp < Makefile.in > Makefile
+cd ..
+rem   ----------------------------------------------------------------------
 Echo Configuring the main directory...
 If "%DJGPP_VER%" == "1" goto mainv1
 Echo Looking for the GDB init file...
+If not Exist src\_gdbinit If Exist src\.gdbinit update src/.gdbinit src/_gdbinit
 If Exist src\_gdbinit goto gdbinitOk
 Echo ERROR:
 Echo I cannot find the GDB init file.  It was called ".gdbinit" in
@@ -208,10 +219,15 @@ Echo Then run CONFIG.BAT again with the same arguments you did now.
 goto End
 :gdbinitOk
 Echo Looking for the GDB init file...found
-copy msdos\mainmake.v2 makefile >nul
+copy msdos\mainmake.v2 Makefile >nul
 :mainv1
-If "%DJGPP_VER%" == "1" copy msdos\mainmake makefile >nul
+If "%DJGPP_VER%" == "1" copy msdos\mainmake Makefile >nul
 rem   ----------------------------------------------------------------------
+goto End
+:SmallEnv
+echo Your environment size is too small.  Please enlarge it and run me again.
+echo For example, type "command.com /e:2048" to have 2048 bytes available.
+set $foo$=
 :end
 set X11=
 set nodebug=