X-Git-Url: https://code.delx.au/gnu-emacs/blobdiff_plain/46947372a36a43d9931d151575ebec9bf6951797..03da5d089a8ed035cec443a27259e7d21487a22e:/Makefile.in diff --git a/Makefile.in b/Makefile.in index 1c7d6dfad9..c8fa29b343 100644 --- a/Makefile.in +++ b/Makefile.in @@ -2,275 +2,778 @@ # DIST: make most of the changes to this file you might want, so try # DIST: that first. +# Copyright (C) 1992,93,94,95,96,97,98,1999,2000,01,02,03,04,2005 +# Free Software Foundation, Inc. + +# This file is part of GNU Emacs. + +# GNU Emacs is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# GNU Emacs is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with GNU Emacs; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301, USA. + # make all to compile and build Emacs. # make install to install it. -# make install.sysv to install on system V. Note that on system V you -# must change mandir to /usr/local/man/man1. -# make install.xenix to install on Xenix. -# make install.aix to install on AIX. -# make tags to update tags tables. +# make TAGS to update tags tables. +# +# make clean or make mostlyclean +# Delete all files from the current directory that are normally +# created by building the program. Don't delete the files that +# record the configuration. Also preserve files that could be made +# by building, but normally aren't because the distribution comes +# with them. +# +# Delete `.dvi' files here if they are not part of the distribution. +# +# make distclean +# Delete all files from the current directory that are created by +# configuring or building the program. If you have unpacked the +# source and built the program without creating any other files, +# `make distclean' should leave only the files that were in the +# distribution. # -# make distclean to delete everything that wasn't in the distribution. -# This is a very dangerous thing to do! -# make clean -# This is a little less dangerous. +# make maintainer-clean +# Delete everything from the current directory that can be +# reconstructed with this Makefile. This typically includes +# everything deleted by distclean, plus more: .elc files, +# C source files produced by Bison, tags tables, info files, +# and so on. +# +# make extraclean +# Still more severe - delete backup and autosave files, too. +# +# make bootstrap +# Recompiles all the Emacs Lisp files using the latest source, +# then rebuilds Emacs. +# +# make bootfast +# Recompiles changed Emacs Lisp files using the latest C source, +# then rebuilds Emacs. This is faster than `make bootstrap' +# but once in a while an old .elc file can cause trouble. SHELL = /bin/sh -# ==================== Where To Install Things ==================== +# This may not work with certain non-GNU make's. It only matters when +# inheriting a CDPATH not starting with the current directory. +CDPATH= -# The default location for installation. Everything is placed in -# subdirectories of this directory. This directory must exist when -# you start installation. The default values for many of the -# variables below are expressed in terms of this one, so you may not -# need to change them. -prefix=/usr/local +# If Make doesn't predefine MAKE, set it here. +@SET_MAKE@ -# Where to install Emacs and other binaries that people will want to -# run directly (like etags). -bindir=$(prefix)/bin +# ==================== Things `configure' Might Edit ==================== -# A directory under which we will install many of Emacs's files. The -# default values for many of the variables below are expressed in -# terms of this one, so you may not need to change them. -emacsdir=$(prefix)/emacs-19.0 +CC=@CC@ +CPP=@CPP@ +C_SWITCH_SYSTEM=@c_switch_system@ +ALLOCA=@ALLOCA@ +LN_S=@LN_S@ +CFLAGS=@CFLAGS@ +LDFLAGS=@LDFLAGS@ +CPPFLAGS=@CPPFLAGS@ +C_SWITCH_X_SITE=@C_SWITCH_X_SITE@ +LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@ +EXEEXT=@EXEEXT@ -# Where to install and expect the architecture-independent data files -# (like the tutorial and the Zippy database). -datadir=$(emacsdir)/etc +### These help us choose version- and architecture-specific directories +### to install files in. -# Where to install the elisp files distributed with Emacs. Strictly -# speaking, all the elisp files should go under datadir (above), since -# both elisp source and compiled elisp are completely portable, but -# it's traditional to give the lisp files their own subdirectory. -lispdir=$(emacsdir)/lisp +### This should be the number of the Emacs version we're building, +### like `18.59' or `19.0'. +version=@version@ -# Directories Emacs should search for elisp files specific to this -# site (i.e. customizations), before consulting $(lispdir). This -# should be a colon-separated list of directories. -locallisppath=$(emacsdir)/local-lisp +### This should be the name of the configuration we're building Emacs +### for, like `mips-dec-ultrix' or `sparc-sun-sunos'. +configuration=@configuration@ -# Where Emacs will search to find its elisp files. Before changing -# this, check to see if your purpose wouldn't better be served by -# changing locallisppath. This should be a colon-separated list of -# directories. -lisppath=$(locallisppath):$(lispdir) - -# Where Emacs will search for its elisp files before dumping. This is -# only used during the process of compiling Emacs, to help Emacs find -# its lisp files before they've been installed in their final -# location. It's usually identical to lisppath, except that the entry -# for the directory containing the installed lisp files has been -# replaced with ../lisp. This should be a colon-separated list of -# directories. -dumplisppath=$(locallisppath):../lisp +# ==================== Where To Install Things ==================== -# Where to install and expect the files that Emacs modifies as it -# runs. These files are all architecture-independent. Right now, -# the only such data is the locking directory. -statedir=$(emacsdir) +# The default location for installation. Everything is placed in +# subdirectories of this directory. The default values for many of +# the variables below are expressed in terms of this one, so you may +# not need to change them. This defaults to /usr/local. +prefix=@prefix@ + +# Like `prefix', but used for architecture-specific files. +exec_prefix=@exec_prefix@ -# Where to create and expect the locking directory, where the Emacs -# locking code keeps track of which files are currently being edited. -lockdir=$(statedir)/lock +# Where to install Emacs and other binaries that people will want to +# run directly (like etags). +bindir=@bindir@ + +# Where to install architecture-independent data files. ${lispdir} +# and ${etcdir} are subdirectories of this. +datadir=@datadir@ + +# Where to install and expect the files that Emacs modifies as it +# runs. These files are all architecture-independent. +# Right now, this is not used. +sharedstatedir=@sharedstatedir@ # Where to install and expect executable files to be run by Emacs # rather than directly by users, and other architecture-dependent -# data. -libdir=$(emacsdir)/arch-lib +# data. ${archlibdir} is a subdirectory of this. +libexecdir=@libexecdir@ -# Where to install Emacs's man pages. -mandir=/usr/man/man1 +# Where to install Emacs's man pages, and what extension they should have. +mandir=@mandir@ +manext=.1 +man1dir=$(mandir)/man1 # Where to install and expect the info files describing Emacs. In the -# past, this defaulted to a subdirectory of $(prefix)/lib/emacs, but +# past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but # since there are now many packages documented with the texinfo # system, it is inappropriate to imply that it is part of Emacs. -infodir=$(prefix)/info +infodir=@infodir@ + +# Directory for local state files for all programs. +localstatedir=@localstatedir@ + +# Where to look for bitmap files. +bitmapdir=@bitmapdir@ +# Where to find the source code. The source code for Emacs's C kernel is +# expected to be in ${srcdir}/src, and the source code for Emacs's +# utility programs is expected to be in ${srcdir}/lib-src. This is +# set by the configure script's `--srcdir' option. + +# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH. +srcdir=@srcdir@ + +# Tell make where to find source files; this is needed for the makefiles. +VPATH=@srcdir@ + +# Where to find the application default. +x_default_search_path=@x_default_search_path@ + +# Location to install Emacs.app on Mac OS X +carbon_appdir=@carbon_appdir@ + +# ==================== Emacs-specific directories ==================== + +# These variables hold the values Emacs will actually use. They are +# based on the values of the standard Make variables above. + +# Where to install the lisp files distributed with +# Emacs. This includes the Emacs version, so that the +# lisp files for different versions of Emacs will install +# themselves in separate directories. +lispdir=@lispdir@ + +# Directories Emacs should search for lisp files specific +# to this site (i.e. customizations), before consulting +# ${lispdir}. This should be a colon-separated list of +# directories. +locallisppath=@locallisppath@ + +# Where Emacs will search to find its lisp files. Before +# changing this, check to see if your purpose wouldn't +# better be served by changing locallisppath. This +# should be a colon-separated list of directories. +lisppath=@lisppath@ + +# Where Emacs will search for its lisp files while +# building. This is only used during the process of +# compiling Emacs, to help Emacs find its lisp files +# before they've been installed in their final location. +# It's usually identical to lisppath, except that +# it does not include locallisppath, and the +# entry for the directory containing the installed lisp +# files has been replaced with ../lisp. This should be a +# colon-separated list of directories. +buildlisppath=${srcdir}/lisp + +# Where to install the other architecture-independent +# data files distributed with Emacs (like the tutorial, +# the cookie recipes and the Zippy database). This path +# usually contains the Emacs version number, so the data +# files for multiple versions of Emacs may be installed +# at once. +etcdir=@etcdir@ + +# Where to put executables to be run by Emacs rather than +# the user. This path usually includes the Emacs version +# and configuration name, so that multiple configurations +# for multiple versions of Emacs may be installed at +# once. +archlibdir=@archlibdir@ + +# Where to put the docstring file. +docdir=@docdir@ + +# Where to install Emacs game score files. +gamedir=@gamedir@ # ==================== Utility Programs for the Build ==================== # Allow the user to specify the install program. -INSTALL = install -INSTALLFLAGS = -c -INSTALL_PROGRAM = ${INSTALL} -INSTALL_DATA = ${INSTALL} - +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_INFO = @INSTALL_INFO@ +# By default, we uphold the dignity of our programs. +INSTALL_STRIP = # ============================= Targets ============================== -# Flags passed down to subdirectory makefiles. -MFLAGS = +# Program name transformation. +TRANSFORM = @program_transform_name@ + +# What emacs should be called when installed. +EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'` +EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'` # Subdirectories to make recursively. `lisp' is not included -# because the compiled lisp files are part of the distribution -# and you cannot remake them without installing Emacs first. +# because the compiled lisp files are part of the distribution. +# leim is not included because it needs special handling. SUBDIR = lib-src src -# Subdirectories to install, and where they'll go. -COPYDIR = arch-lib etc info lisp -COPYDESTS = $(libdir) $(datadir) $(infodir) $(lispdir) - -all: src/paths.h ${SUBDIR} +# The makefiles of the directories in $SUBDIR. +SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile lispref/Makefile lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile -removenullpaths=sed -e 's/^://' -e 's/:$$//' -e 's/::/:/' +# Subdirectories to install, and where they'll go. +# lib-src's makefile knows how to install it, so we don't do that here. +# leim's makefile also knows how to install it, so we don't do that here. +# When installing the info files, we need to do special things to +# avoid nuking an existing dir file, so we don't do that here; +# instead, we have written out explicit code in the `install' targets. +COPYDIR = ${srcdir}/etc ${srcdir}/lisp +COPYDESTS = ${etcdir} ${lispdir} + +all: ${SUBDIR} leim -src/paths.h: Makefile src/paths.h.in - lisppath=`echo $(lisppath) | $(removenullpaths)` ; \ - dumplisppath=`echo $(dumplisppath) | $(removenullpaths)` ; \ - /bin/sed < src/paths.h.in > src/paths.h \ - -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \ - -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${dumplisppath}'";' \ - -e 's;\(#.*PATH_EXEC\).*$$;\1 "$(libdir)";' \ - -e 's;\(#.*PATH_DATA\).*$$;\1 "$(datadir)";' \ - -e 's;\(#.*PATH_LOCK\).*$$;\1 "$(lockdir)/";' \ - -e 's;\(#.*PATH_SUPERLOCK\).*$$;\1 "$(lockdir)/!!!SuperLock!!!";' +removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g' -src: lib-src +# Generate epaths.h from epaths.in. This target is invoked by `configure'. +epaths-force: FRC + @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \ + buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \ + x_default_search_path=`echo ${x_default_search_path}`; \ + gamedir=`echo ${gamedir}`; \ + sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \ + -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";' \ + -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \ + -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \ + -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \ + -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \ + -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \ + -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \ + -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \ + -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \ + -e 's;/[*] *arch-tag:.*;/*;') && \ + ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h + +# For parallel make, src should be build before leim. +# "export PARALLEL=0" is for SGI's Make, to prevent it from +# running more than 1 process in the leim directory, especially for +# the $TIT files there. +leim: src ${SUBDIR_MAKEFILES} FRC + (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \ + CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ + LDFLAGS='${LDFLAGS}' MAKE='${MAKE}') + +src: lib-src FRC + +lib-src: FRC src/config.stamp + +.RECURSIVE: ${SUBDIR} leim + +${SUBDIR}: maybe_bootstrap ${SUBDIR_MAKEFILES} FRC + cd $@; $(MAKE) all $(MFLAGS) \ + CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ + LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' + +blessmail: ${SUBDIR_MAKEFILES} src FRC + cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \ + MAKE='${MAKE}' archlibdir='$(archlibdir)' + +Makefile: $(srcdir)/Makefile.in config.status + ./config.status + +config.status: ${srcdir}/configure + ./config.status --recheck + +AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/m4/getopt.m4 + +$(srcdir)/configure: $(AUTOCONF_INPUTS) + cd ${srcdir} && autoconf + +$(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in + @true +$(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS) + cd ${srcdir} && autoheader + rm -f $(srcdir)/src/stamp-h.in + echo timestamp > $(srcdir)/src/stamp-h.in + +src/Makefile: $(srcdir)/src/Makefile.in config.status + ./config.status + +src/config.stamp: $(srcdir)/src/config.in config.status + ./config.status + touch src/config.stamp + +lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status + ./config.status + +man/Makefile: $(srcdir)/man/Makefile.in config.status + ./config.status + +lispref/Makefile: $(srcdir)/lispref/Makefile.in config.status + ./config.status + +lispintro/Makefile: $(srcdir)/lispintro/Makefile.in config.status + ./config.status + +oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status + ./config.status + +lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status + ./config.status + +leim/Makefile: $(srcdir)/leim/Makefile.in config.status + ./config.status + +# ==================== Installation ==================== + +## If we let lib-src do its own installation, that means we +## don't have to duplicate the list of utilities to install in +## this Makefile as well. + +## On AIX, use tar xBf. +## On Xenix, use tar xpf. + +.PHONY: install mkdir + +## We delete each directory in ${COPYDESTS} before we copy into it; +## that way, we can reinstall over directories that have been put in +## place with their files read-only (perhaps because they are checked +## into RCS). In order to make this safe, we make sure that the +## source exists and is distinct from the destination. +### We do install-arch-indep first because +### the executable needs the Lisp files and DOC file to work properly. +install: all install-arch-indep install-arch-dep install-leim blessmail + @true + +### Install the executables that were compiled specifically for this machine. +### It would be nice to do something for a parallel make +### to ensure that install-arch-indep finishes before this starts. +install-arch-dep: mkdir + (cd lib-src; \ + $(MAKE) install $(MFLAGS) prefix=${prefix} \ + exec_prefix=${exec_prefix} bindir=${bindir} \ + libexecdir=${libexecdir} archlibdir=${archlibdir} \ + INSTALL_STRIP=${INSTALL_STRIP}) + ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} ${bindir}/$(EMACSFULL) + -chmod 1755 ${bindir}/$(EMACSFULL) + rm -f ${bindir}/$(EMACS) + -ln ${bindir}/$(EMACSFULL) ${bindir}/$(EMACS) + -unset CDPATH; \ + for f in `cd lib-src && echo fns-*.el`; do \ + if test -r lib-src/$$f ; then \ + ${INSTALL_DATA} lib-src/$$f ${archlibdir}/$$f; \ + else true; fi ; \ + done + if test "${carbon_appdir}" != ""; then \ + umask 022; mkdir -p ${carbon_appdir}/Emacs.app; \ + (cd mac/Emacs.app; (tar -chf - . | \ + (cd ${carbon_appdir}/Emacs.app; umask 022; tar -xvf - \ + && cat > /dev/null))) || exit 1; \ + fi -.RECURSIVE: ${SUBDIR} +### Install the files that are machine-independent. +### Most of them come straight from the distribution; +### the exception is the DOC-* files, which are copied +## from the build directory. -${SUBDIR}: FRC - cd $@; make ${MFLAGS} all +## Note that we copy DOC* and then delete DOC +## as a workaround for a bug in tar on Ultrix 4.2. -install: all mkdir lockdir - -set ${COPYDESTS} ; \ - for dir in ${COPYDIR} ; do \ - dest=$$1 ; shift ; \ - if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \ - (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xf - ) ; \ - for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ - rm -rf $${subdir}/RCS ; \ - rm -f $${subdir}/\#* ; \ - rm -f $${subdir}/*~ ; \ - done ; \ - fi ; \ - done - ${INSTALL_PROGRAM} ${INSTALLFLAGS} -c arch-lib/emacsclient ${bindir}/emacsclient - ${INSTALL_PROGRAM} ${INSTALLFLAGS} -c arch-lib/etags ${bindir}/etags - ${INSTALL_PROGRAM} ${INSTALLFLAGS} -c arch-lib/ctags ${bindir}/ctags - ${INSTALL_PROGRAM} ${INSTALLFLAGS} -c -m 1755 src/xemacs ${bindir}/xemacs - ${INSTALL_DATA} ${INSTALLFLAGS} -c -m 444 etc/emacs.1 ${mandir}/emacs.1 - -rm -f ${bindir}/emacs - mv ${bindir}/xemacs ${bindir}/emacs - -install.sysv: all mkdir lockdir +## If people complain about the h flag in tar command, take that out. +## That flag is also used in leim/Makefile.in +install-arch-indep: mkdir info -set ${COPYDESTS} ; \ - for dir in ${COPYDIR} ; do \ - dest=$$1 ; shift ; \ - if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \ - (cd $${dir}; find . -print | cpio -pdum ${dest} ) ; \ - for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ - rm -rf $${subdir}/RCS ; \ - rm -f $${subdir}/\#* ; \ - rm -f $${subdir}/*~ ; \ - done ; \ - fi ; \ - done - -cpset arch-lib/emacsclient ${bindir}/emacsclient 755 bin bin - -cpset arch-lib/etags ${bindir}/etags 755 bin bin - -cpset arch-lib/ctags ${bindir}/ctags 755 bin bin - -cpset etc/emacs.1 ${mandir}/emacs.1 444 bin bin - -/bin/rm -f ${bindir}/emacs - -cpset src/xemacs ${bindir}/emacs 1755 bin bin - -install.xenix: all mkdir lockdir + unset CDPATH; \ + for dir in ${COPYDIR} ; do \ + if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \ + rm -rf $$1 ; \ + fi ; \ + shift ; \ + done -set ${COPYDESTS} ; \ - for dir in ${COPYDIR} ; do \ - dest=$$1 ; shift ; \ - if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \ - (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xpf - ) ; \ - for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ - rm -rf $${subdir}/RCS ; \ - rm -f $${subdir}/\#* ; \ - rm -f $${subdir}/*~ ; \ - done ; \ - fi ; \ - done - cp arch-lib/etags arch-lib/ctags arch-lib/emacsclient ${bindir} - chmod 755 ${bindir}/etags ${bindir}/ctags ${bindir}/emacsclient - cp etc/emacs.1 ${mandir}/emacs.1 - chmod 444 ${mandir}/emacs.1 - -mv -f ${bindir}/emacs ${bindir}/emacs.old - cp src/xemacs ${bindir}/emacs - chmod 1755 ${bindir}/emacs - -rm -f ${bindir}/emacs.old - -install.aix: all mkdir lockdir - -set ${COPYDESTS} ; \ - for dir in ${COPYDIR} ; do \ - dest=$$1 ; shift ; \ - if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \ - (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xBf - ) ; \ - for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ - rm -rf $${subdir}/RCS ; \ - rm -f $${subdir}/\#* ; \ - rm -f $${subdir}/*~ ; \ - done ; \ - fi ; \ - done - ${INSTALL_PROGRAM} ${INSTALLFLAGS} -f ${bindir} etc/emacsclient - ${INSTALL_PROGRAM} ${INSTALLFLAGS} -f ${bindir} etc/etags - ${INSTALL_PROGRAM} ${INSTALLFLAGS} -f ${bindir} etc/ctags - ${INSTALL_PROGRAM} ${INSTALLFLAGS} -M 1755 -f ${bindir} src/xemacs - ${INSTALL_DATA} ${INSTALLFLAGS} -M 444 -f ${mandir} etc/emacs.1 - -rm -f ${bindir}/emacs - mv ${bindir}/xemacs ${bindir}/emacs - -# Build all the directories + mkdir ${COPYDESTS} ; \ + chmod ugo+rx ${COPYDESTS} ; \ + unset CDPATH; \ + for dir in ${COPYDIR} ; do \ + dest=$$1 ; shift ; \ + [ -d $${dir} ] \ + && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \ + && (echo "Copying $${dir} to $${dest}..." ; \ + (cd $${dir}; tar -chf - . ) \ + | (cd $${dest}; umask 022; \ + tar -xvf - && cat > /dev/null) || exit 1; \ + find $${dest} -exec chown $${LOGNAME:-$$USERNAME} {} ';' ;\ + for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \ + chmod a+rx $${subdir} ; \ + rm -rf $${subdir}/RCS ; \ + rm -rf $${subdir}/CVS ; \ + rm -f $${subdir}/.cvsignore ; \ + rm -f $${subdir}/.arch-inventory ; \ + rm -f $${subdir}/\#* ; \ + rm -f $${subdir}/.\#* ; \ + rm -f $${subdir}/*~ ; \ + rm -f $${subdir}/*.orig ; \ + rm -f $${subdir}/[mM]akefile* ; \ + rm -f $${subdir}/ChangeLog* ; \ + rm -f $${subdir}/dired.todo ; \ + done) ; \ + done + -rm -f ${lispdir}/subdirs.el + $(srcdir)/update-subdirs ${lispdir} + if [ -f ${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \ + then true; \ + else \ + (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \ + echo " (normal-top-level-add-subdirs-to-load-path))") \ + > ${datadir}/emacs/${version}/site-lisp/subdirs.el; \ + fi + chmod a+r ${datadir}/emacs/${version}/site-lisp/subdirs.el + -if [ -f ${datadir}/emacs/site-lisp/subdirs.el ]; \ + then true; \ + else \ + (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \ + echo " (normal-top-level-add-subdirs-to-load-path))") \ + > ${datadir}/emacs/site-lisp/subdirs.el; \ + fi + -chmod a+r ${datadir}/emacs/site-lisp/subdirs.el + -unset CDPATH; \ + if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \ + then \ + echo "Copying etc/DOC-* to ${docdir} ..." ; \ + (cd ./etc; tar -chf - DOC*) \ + |(cd ${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \ + (cd $(docdir); chown $${LOGNAME:-$$USERNAME} DOC*; chmod a+r DOC*; \ + if test "`echo DOC-*`" != "DOC-*"; then rm DOC; fi); \ + else true; fi + -unset CDPATH; \ + if [ -r ./lisp ] \ + && [ -r ./lisp/simple.el ] \ + && [ x`(cd ./lisp; /bin/pwd)` != x`(cd ${lispdir}; /bin/pwd)` ] \ + && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \ + then \ + echo "Copying lisp/*.el and lisp/*.elc to ${lispdir} ..." ; \ + (cd lisp; tar -chf - *.el *.elc) \ + |(cd ${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \ + (cd ${lispdir}; find . -exec chown $${LOGNAME:-$$USERNAME} {} ';') ; \ + else true; fi + -unset CDPATH; \ + thisdir=`/bin/pwd`; \ + if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \ + then \ + (cd ${infodir}; \ + if [ -f dir ]; then true; \ + else \ + (cd $${thisdir}; \ + ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir; \ + chmod a+r ${infodir}/dir); \ + fi; \ + cd ${srcdir}/info ; \ + for f in ada-mode* autotype* calc* ccmode* cl* dired-x* ebrowse* ediff* efaq* eintr* elisp* emacs* emacs-mime* emacs-xtra* eshell* eudc* flymake* forms* gnus* idlwave* info* message* mh-e* org* pcl-cvs* pgg* reftex* sc* ses* sieve* speedbar* tramp* vip* widget* woman* smtpmail* url*; do \ + (cd $${thisdir}; \ + ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f; \ + chmod a+r ${infodir}/$$f); \ + done); \ + else true; fi + -unset CDPATH; \ + thisdir=`/bin/pwd`; \ + if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \ + then \ + for f in ada-mode autotype calc ccmode cl dired-x ebrowse ediff efaq elisp eintr emacs emacs-mime emacs-xtra eshell eudc flymake forms gnus idlwave info message mh-e org pcl-cvs pgg reftex sc ses sieve speedbar tramp vip viper widget woman smtpmail url; do \ + (cd $${thisdir}; \ + ${INSTALL_INFO} --info-dir=${infodir} ${infodir}/$$f); \ + done; \ + else true; fi + -chmod -R a+r ${datadir}/emacs ${COPYDESTS} ${infodir} + thisdir=`/bin/pwd`; \ + cd ${srcdir}/etc; \ + for page in emacs emacsclient etags ctags ; do \ + (cd $${thisdir}; \ + ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${man1dir}/$${page}${manext}; \ + chmod a+r ${man1dir}/$${page}${manext}); \ + done + +### Install LEIM files. Although they are machine-independent, we +### have separate target here instead of including it in +### `install-arch-indep'. People who extracted LEIM files after they +### insalled Emacs itself can install only LEIM files by this target. +install-leim: leim/Makefile mkdir + cd leim; $(MAKE) install + +### Build Emacs and install it, stripping binaries while installing them. +install-strip: + $(MAKE) INSTALL_STRIP=-s install + +### Build all the directories we're going to install Emacs in. Since +### we may be creating several layers of directories (for example, +### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs +### instead of mkdir. Not all systems' mkdir programs have the `-p' flag. mkdir: FRC - # If any of the directories are below ${emacsdir}, create it. - -for dir in ${COPYDESTS}; do \ - case "$${dir}" in \ - ${emacsdir}/* ) \ - if [ ! -d ${emacsdir} ]; then \ - -mkdir ${emacsdir} ; \ - -chmod 777 ${emacsdir} ; \ - fi ; \ - break\ - ;; \ - esac ; \ - done - -mkdir ${COPYDESTS} - -chmod 777 ${COPYDESTS} - -lockdir: - # If the lockdir needs ${emacsdir}, create it. - -case "${lockdir}" in \ - ${statedir}/* ) \ - if [ ! -d ${emacsdir} ]; then \ - -mkdir ${emacsdir} ; \ - -chmod 777 ${emacsdir} ; \ - fi \ - ;; \ - esac - -mkdir ${LOCKDIR} - -chmod 777 ${LOCKDIR} - -FRC: - -clean mostlyclean: - cd src; make clean - if [ `/bin/pwd` != `(cd ${DESTDIR}${LIBDIR}; /bin/pwd)` ] ; then \ - cd etc; make clean; \ - else true; \ + if [ -d ${datadir} ]; then true; else \ + $(srcdir)/mkinstalldirs ${datadir}; \ + chmod a+r ${datadir};\ fi - cd oldXMenu; make clean + $(srcdir)/mkinstalldirs ${COPYDESTS} ${infodir} ${man1dir} \ + ${bindir} ${docdir} ${libexecdir} \ + ${datadir}/emacs/site-lisp \ + ${datadir}/emacs/${version}/site-lisp \ + `echo ${locallisppath} | sed 's/:/ /g'` + +### Delete all the installed files that the `install' target would +### create (but not the noninstalled files such as `make all' would +### create). +### +### Don't delete the lisp and etc directories if they're in the source tree. +uninstall: + (cd lib-src; \ + $(MAKE) $(MFLAGS) uninstall \ + prefix=${prefix} exec_prefix=${exec_prefix} \ + bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}) + -unset CDPATH; \ + for dir in ${lispdir} ${etcdir} ; do \ + if [ -d $${dir} ]; then \ + case `(cd $${dir} ; /bin/pwd)` in \ + `(cd ${srcdir} ; /bin/pwd)`* ) ;; \ + * ) rm -rf $${dir} ;; \ + esac ; \ + case $${dir} in \ + ${datadir}/emacs/${version}/* ) \ + rm -rf ${datadir}/emacs/${version} \ + ;; \ + esac ; \ + fi ; \ + done + (cd ${archlibdir} && rm -f fns-*) + -rm -rf ${libexecdir}/emacs/${version} + (cd ${infodir} && rm -f cl* ada-mode* autotype* calc* ccmode* ebrowse* efaq* eintr elisp* eshell* eudc* idlwave* message* pcl-cvs* reftex* speedbar* tramp* widget* woman* dired-x* ediff* emacs* emacs-xtra* flymake* forms* gnus* info* mh-e* org* sc* ses* vip* smtpmail* url*) + (cd ${man1dir} && rm -f emacs${manext} emacsclient${manext} etags${manext} ctags${manext}) + (cd ${bindir} && rm -f $(EMACSFULL) $(EMACS)) -distclean: - for i in ${SUBDIR}; do (cd $$i; make ${MFLAGS} distclean); done - -(cd lock; rm *) - -rm config.status config-tmp-* - -rm #*# *~ -realclean: - for i in ${SUBDIR}; do (cd $$i; make ${MFLAGS} realclean); done - (cd lock; rm *) - rm config.status +FRC: -TAGS tags: lib-src - cd src; ../arch-lib/etags *.[ch] ../lisp/*.el ../lisp/term/*.el +# ==================== Cleaning up and miscellanea ==================== + +.PHONY: mostlyclean clean distclean maintainer-clean extraclean + +### `mostlyclean' +### Like `clean', but may refrain from deleting a few files that people +### normally don't want to recompile. For example, the `mostlyclean' +### target for GCC does not delete `libgcc.a', because recompiling it +### is rarely necessary and takes a lot of time. +mostlyclean: FRC + (cd src; $(MAKE) $(MFLAGS) mostlyclean) + (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean) + (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean) + (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean) + -(cd man && $(MAKE) $(MFLAGS) mostlyclean) + -(cd lispref && $(MAKE) $(MFLAGS) mostlyclean) + -(cd lispintro && $(MAKE) $(MFLAGS) mostlyclean) + (cd leim; $(MAKE) $(MFLAGS) mostlyclean) + +### `clean' +### Delete all files from the current directory that are normally +### created by building the program. Don't delete the files that +### record the configuration. Also preserve files that could be made +### by building, but normally aren't because the distribution comes +### with them. +### +### Delete `.dvi' files here if they are not part of the distribution. +clean: FRC + (cd src; $(MAKE) $(MFLAGS) clean) + (cd oldXMenu; $(MAKE) $(MFLAGS) clean) + (cd lwlib; $(MAKE) $(MFLAGS) clean) + (cd lib-src; $(MAKE) $(MFLAGS) clean) + -(cd man && $(MAKE) $(MFLAGS) clean) + -(cd lispref && $(MAKE) $(MFLAGS) clean) + -(cd lispintro && $(MAKE) $(MFLAGS) clean) + (cd leim; $(MAKE) $(MFLAGS) clean) + +### `distclean' +### Delete all files from the current directory that are created by +### configuring or building the program. If you have unpacked the +### source and built the program without creating any other files, +### `make distclean' should leave only the files that were in the +### distribution. +top_distclean=\ + rm -f config.status config.cache config.log ; \ + rm -f Makefile ${SUBDIR_MAKEFILES} ; \ + if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi +distclean: FRC + (cd src; $(MAKE) $(MFLAGS) distclean) + (cd oldXMenu; $(MAKE) $(MFLAGS) distclean) + (cd lwlib; $(MAKE) $(MFLAGS) distclean) + (cd lib-src; $(MAKE) $(MFLAGS) distclean) + (cd man && $(MAKE) $(MFLAGS) distclean) + (cd lispref && $(MAKE) $(MFLAGS) distclean) + (cd lispintro && $(MAKE) $(MFLAGS) distclean) + (cd leim; $(MAKE) $(MFLAGS) distclean) + (cd lisp; $(MAKE) $(MFLAGS) distclean) + ${top_distclean} + +### `maintainer-clean' +### Delete everything from the current directory that can be +### reconstructed with this Makefile. This typically includes +### everything deleted by distclean, plus more: C source files +### produced by Bison, tags tables, info files, and so on. +### +### One exception, however: `make maintainer-clean' should not delete +### `configure' even if `configure' can be remade using a rule in the +### Makefile. More generally, `make maintainer-clean' should not delete +### anything that needs to exist in order to run `configure' and then +### begin to build the program. +maintainer-clean: FRC + (cd src; $(MAKE) $(MFLAGS) maintainer-clean) + (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean) + (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean) + (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean) + -(cd man && $(MAKE) $(MFLAGS) maintainer-clean) + -(cd lispref && $(MAKE) $(MFLAGS) maintainer-clean) + -(cd lispintro && $(MAKE) $(MFLAGS) maintainer-clean) + (cd leim; $(MAKE) $(MFLAGS) maintainer-clean) + (cd lisp; $(MAKE) $(MFLAGS) maintainer-clean) + ${top_distclean} + +### This doesn't actually appear in the coding standards, but Karl +### says GCC supports it, and that's where the configuration part of +### the coding standards seem to come from. It's like distclean, but +### it deletes backup and autosave files too. +extraclean: + for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done + ${top_distclean} + -rm -f config-tmp-* + -rm -f *~ \#* + +### Unlocking and relocking. The idea of these productions is to reduce +### hassles when installing an incremental tar of Emacs. Do `make unlock' +### before unlocking the file to take the write locks off all sources so +### that tar xvof will overwrite them without fuss. Then do `make relock' +### afterward so that VC mode will know which files should be checked in +### if you want to mung them. +### +### Note: it's no disaster if these productions miss a file or two; tar +### and VC will swiftly let you know if this happens, and it is easily +### corrected. +SOURCES = ChangeLog FTP INSTALL Makefile.in \ + README configure make-dist move-if-change + +.PHONY: unlock relock + +unlock: + chmod u+w $(SOURCES) + -(cd elisp; chmod u+w Makefile README *.texi) + (cd etc; $(MAKE) $(MFLAGS) unlock) + (cd lib-src; $(MAKE) $(MFLAGS) unlock) + (cd lisp; $(MAKE) $(MFLAGS) unlock) + (cd lisp/term; chmod u+w README *.el) + (cd man; chmod u+w *texi* ChangeLog split-man) + (cd lispref; chmod u+w *texi* ChangeLog) + (cd lispintro; chmod u+w *texi* ChangeLog) + (cd oldXMenu; chmod u+w *.[ch] Makefile README) + (cd lwlib; chmod u+w *.[ch] Makefile README) + (cd src; $(MAKE) $(MFLAGS) unlock) + +relock: + chmod u-w $(SOURCES) + -(cd elisp; chmod u-w Makefile README *.texi) + (cd etc; $(MAKE) $(MFLAGS) relock) + (cd lib-src; $(MAKE) $(MFLAGS) relock) + (cd lisp; $(MAKE) $(MFLAGS) relock) + (cd lisp/term; chmod u+w README *.el) + (cd man; chmod u+w *texi* ChangeLog split-man) + (cd lispref; chmod u+w *texi* ChangeLog) + (cd lispintro; chmod u+w *texi* ChangeLog) + (cd oldXMenu; chmod u+w *.[ch] Makefile README) + (cd lwlib; chmod u+w *.[ch] Makefile README) + (cd src; $(MAKE) $(MFLAGS) relock) + +# The src subdir knows how to do the right thing +# even when the build directory and source dir are different. +TAGS tags: lib-src src + cd src; $(MAKE) tags check: @echo "We don't have any tests for GNU Emacs yet." + +dist: + cd ${srcdir}; ./make-dist + +.PHONY: info dvi dist check html +force-info: +# Note that man/Makefile knows how to +# put the info files in $(srcdir), +# so we can do ok running make in the build dir. +info: force-info + (cd man; $(MAKE) $(MFLAGS) info) + (cd lispref; $(MAKE) $(MFLAGS) info) + (cd lispintro; $(MAKE) $(MFLAGS) info) +dvi: + (cd man; $(MAKE) $(MFLAGS) dvi) + (cd lispref; $(MAKE) $(MFLAGS) elisp.dvi) + (cd lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi) + +#### Bootstrapping. + +### This is meant for Emacs maintainers only. It first cleans the +### lisp subdirectory, removing all compiled Lisp files. Then a +### special emacs executable is built from Lisp sources, which is then +### used to compile Lisp files. The last step is a "normal" make. + +.PHONY: bootstrap +.PHONY: bootstrap-build +.PHONY: bootfast +.PHONY: maybe_bootstrap + +maybe_bootstrap: + @bar="`echo $(srcdir)/lisp/*.elc`"; \ + if [ \( "$$bar" = '$(srcdir)/lisp/*.elc' \) -o \( "$$bar" = '' \) ]; then \ + echo "Your tree does not include the compiled Lisp files."; \ + echo "You need to do \`make bootstrap' to build Emacs."; \ + echo "Emacs now requires Texinfo version 4.2."; \ + exit 1;\ + fi + +bootstrap: bootstrap-clean-before info bootstrap-build FRC + +bootfast: bootstrap-clean-before-fast info bootstrap-build FRC + +bootstrap-build: FRC + (cd lisp; $(MAKE) $(MFLAGS) bootstrap-prepare) + (cd src; $(MAKE) $(MFLAGS) bootstrap) + (cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs${EXEEXT}) + (cd src; $(MAKE) $(MFLAGS) mostlyclean) + $(MAKE) $(MFLAGS) all + (cd lisp; $(MAKE) $(MFLAGS) bootstrap-after) + +### Used for `bootstrap' to avoid deleting existing dumped Emacs executables. +bootstrap-clean-before: bootstrap-clean-before-fast FRC + (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean) + +### Used for `bootfast' to avoid deleting existing dumped Emacs executables +### and compiled .elc files. +bootstrap-clean-before-fast: FRC + (cd src; $(MAKE) $(MFLAGS) mostlyclean) + (cd oldXMenu; $(MAKE) $(MFLAGS) clean) + (cd lwlib; $(MAKE) $(MFLAGS) clean) + (cd lib-src; $(MAKE) $(MFLAGS) clean) + -(cd man && $(MAKE) $(MFLAGS) clean) + -(cd lispref && $(MAKE) $(MFLAGS) clean) + -(cd lispintro && $(MAKE) $(MFLAGS) clean) + (cd leim; $(MAKE) $(MFLAGS) clean)