X-Git-Url: https://code.delx.au/gnu-emacs/blobdiff_plain/7e570fbf3ef8ccd31df2651f5d2775c5697d5950..7818df11b85d4829b61f6d967aa421621985b18a:/Makefile.in diff --git a/Makefile.in b/Makefile.in index 122a35d441..984dcea7cc 100644 --- a/Makefile.in +++ b/Makefile.in @@ -1,8 +1,6 @@ -# DIST: This is the distribution Makefile for Emacs. configure can -# DIST: make most of the changes to this file you might want, so try -# DIST: that first. +### @configure_input@ -# Copyright (C) 1992-2012 Free Software Foundation, Inc. +# Copyright (C) 1992-2013 Free Software Foundation, Inc. # This file is part of GNU Emacs. @@ -54,8 +52,11 @@ # make bootstrap # Removes all the compiled files to force a new bootstrap from a # clean slate, and then build in the normal way. +# +# make docs +# Make Emacs documentation files from their sources; requires makeinfo. -SHELL = /bin/sh +SHELL = @SHELL@ # This may not work with certain non-GNU make's. It only matters when # inheriting a CDPATH not starting with the current directory. @@ -64,6 +65,10 @@ CDPATH= # If Make doesn't predefine MAKE, set it here. @SET_MAKE@ +# Prevent submakes from outputting "Entering directory ..." and +# "Leaving directory..." diagnostics that would mess up 'make echo-info'. +QUIET_SUBMAKE = MAKELEVEL=0 + # ==================== Things `configure' Might Edit ==================== cache_file = @cache_file@ @@ -86,6 +91,9 @@ version=@version@ ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'. configuration=@configuration@ +### The nt/ subdirectory gets built only for MinGW +NTDIR=@NTDIR@ + # ==================== Where To Install Things ==================== # Location to install Emacs.app under GNUstep / Mac OS X. @@ -155,6 +163,9 @@ bitmapdir=@bitmapdir@ # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH. srcdir=@srcdir@ +abs_srcdir=@abs_srcdir@ +# MinGW CPPFLAGS may use this. +abs_top_srcdir=@abs_top_srcdir@ # Where the manpage source files are kept. mansrcdir=$(srcdir)/doc/man @@ -208,7 +219,7 @@ lisppath=@lisppath@ # before they've been installed in their final location. # This should be a colon-separated list of directories. # Normally it points to the lisp/ directory in the sources. -buildlisppath=${srcdir}/lisp +buildlisppath=${abs_srcdir}/lisp # Where to install the other architecture-independent # data files distributed with Emacs (like the tutorial, @@ -225,8 +236,8 @@ etcdir=@etcdir@ # once. archlibdir=@archlibdir@ -# Where to put the docstring file. -docdir=@docdir@ +# Where to put the etc/DOC file. +etcdocdir=@etcdocdir@ # Where to install Emacs game score files. gamedir=@gamedir@ @@ -246,12 +257,11 @@ INSTALL_INFO = @INSTALL_INFO@ # By default, we uphold the dignity of our programs. INSTALL_STRIP = MKDIR_P = @MKDIR_P@ -LN_S = @LN_S@ +# Create a link to a file in the same directory as the target. +LN_S_FILEONLY = @LN_S_FILEONLY@ # We use gzip to compress installed .el files. GZIP_PROG = @GZIP_PROG@ -# If non-nil, gzip the installed Info and man pages. -GZIP_INFO = @GZIP_INFO@ # ============================= Targets ============================== @@ -259,29 +269,30 @@ GZIP_INFO = @GZIP_INFO@ TRANSFORM = @program_transform_name@ # What emacs should be called when installed. -EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'` -EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'` +EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'` +EMACS = ${EMACS_NAME}${EXEEXT} +EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT} # Subdirectories to make recursively. -SUBDIR = lib lib-src src lisp leim +SUBDIR = $(NTDIR) lib lib-src src lisp leim # The subdir makefiles created by config.status. SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@ SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'` -# Subdirectories to install, and where they'll go. -# lib-src's makefile knows how to install it, so we don't do that here. -# Directories that cannot simply be copied, eg info, -# are treated separately. -# quail appears twice because in out-of-tree builds, it exists twice. +# Subdirectories to install, and where they'll go. lib-src's and nt's +# makefiles know how to install them, so we don't do that here. +# Directories that cannot simply be copied, eg info, are treated +# separately. quail appears twice because in out-of-tree builds, it +# exists twice. COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail -COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail +COPYDESTS = "$(DESTDIR)${etcdir}" "$(DESTDIR)${lispdir}" "$(DESTDIR)${leimdir}/ja-dic" "$(DESTDIR)${leimdir}/quail" "$(DESTDIR)${leimdir}/quail" all: ${SUBDIR} -.PHONY: all ${SUBDIR} blessmail epaths-force FRC +.PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 FRC -removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g' +removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g' # Generate epaths.h from epaths.in. This target is invoked by `configure'. # See comments in configure.ac for why it is done this way, as opposed @@ -303,19 +314,67 @@ epaths-force: FRC -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \ -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \ -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \ - -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \ + -e 's;\(#.*PATH_DOC\).*$$;\1 "${etcdocdir}";') && \ ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h -lib-src src: lib +# Convert MSYS-style /x/foo or Windows-style x:\foo file names +# into x:/foo that Windows can grok. +msys_to_w32=sed -e 's,\\\\,/,g' -e 's,^/\([A-Za-z]\)/,\1:/,' + +# Transform directory search path and its components. Original can +# be MSYS or Windows style. Set path separator to ";", directory +# separator to "/" and transform MSYS-style "/c/" to "c:/". +# Remove empty path components and escape semicolons. +msys_lisppath_to_w32=sed -e 's,\\\\,/,g' \ + -e 's,\(^\|[:;]\)\([A-Za-z]\):/,\1/\2/,g' \ + -e 's/:/;/g' -e 's,\(^\|;\)/\([A-Za-z]\)/,\1\2:/,g' \ + -e 's/;\+/;/g' -e 's/^;//' -e 's/;$$//' -e 's/;/\\\\;/g' + +# Replace "${prefix}" with '%emacs_dir%' (which expands to install +# directory at runtime). +msys_prefix_subst=sed -e 's!\(^\|;\)'"$${prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g' + +# Quote Sed special characters (except backslash and newline) with +# a double backslash. +msys_sed_sh_escape=sed -e 's/[];$$*.^[]/\\\\&/g' + +# The w32 build needs a slightly different editing, and it uses +# nt/epaths.nt as the template. +# Use the value of ${locallisppath} supplied by `configure', +# to support the --enable-locallisppath argument. +# +# When building with MinGW inside the MSYS tree, 'pwd' produces directories +# relative to the root of the MSYS tree, e.g. '/home/user/foo' instead of +# '/d/MSYS/home/user/foo'. If such a value of srcdir is written to +# src/epaths.h, that causes temacs to fail, because, being a MinGW +# program that knows nothing of MSYS root substitution, it cannot find +# the data directory. "pwd -W" produces Windows-style 'd:/foo/bar' +# absolute directory names, so we use it here to countermand that lossage. +epaths-force-w32: FRC + @(w32srcdir=`cd "${srcdir}"; pwd -W | sed -e 's,^\([A-Za-z]\):,/\1,' | ${msys_to_w32}` ; \ + prefixpattern=`echo '${prefix}' | ${msys_to_w32} | ${msys_sed_sh_escape}` ; \ + locallisppath=`echo '${locallisppath}' | ${msys_lisppath_to_w32} | ${msys_prefix_subst}` ; \ + sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$ \ + -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \ + -e '/^.*#/s/@VER@/${version}/g' \ + -e '/^.*#/s/@CFG@/${configuration}/g' \ + -e "/^.*#/s|@SRC@|$${w32srcdir}|g") && \ + ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h + +# If lib/Makefile would build files in '.', then build them before +# building 'lib', to avoid races with parallel makes. +lib: am--refresh -src: lib-src FRC +lib-src src: $(NTDIR) lib + +src: lib-src # We need to build `emacs' in `src' to compile the *.elc files in `lisp' # and `leim'. lisp leim: src # These targets should be "${SUBDIR} without `src'". -lib lib-src lisp leim: Makefile FRC +lib lib-src lisp leim nt: Makefile FRC cd $@ && $(MAKE) all $(MFLAGS) \ CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' @@ -330,18 +389,15 @@ lib lib-src lisp leim: Makefile FRC # all preloaded elisp files, and only then dump the actual src/emacs, which # is not wrong, but is overkill in 99.99% of the cases. src: Makefile FRC - boot=bootstrap-emacs$(EXEEXT); \ - if [ ! -x "src/$$boot" ]; then \ - cd $@; $(MAKE) all $(MFLAGS) \ - CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ - LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \ - fi; - if [ -r .bzr/checkout/dirstate ]; then \ - vcswitness="`pwd`/.bzr/checkout/dirstate"; \ - fi; \ - cd $@; $(MAKE) all $(MFLAGS) \ - CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ - LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="" \ + dirstate='.bzr/checkout/dirstate'; \ + vcswitness='$$(srcdir)/../'$$dirstate; \ + [ -r "$(srcdir)/$$dirstate" ] || vcswitness=''; \ + cd $@ || exit; \ + boot=bootstrap-emacs$(EXEEXT); \ + [ ! -x "$$boot" ] || boot=''; \ + $(MAKE) all $(MFLAGS) \ + CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ + LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot" \ VCSWITNESS="$$vcswitness" blessmail: Makefile src FRC @@ -355,19 +411,23 @@ blessmail: Makefile src FRC # config.status overrides MAKEFILE_NAME with a bogus name when creating # src/epaths.h, so that 'make epaths-force' does not recursively invoke # config.status and overwrite config.status while executing it (Bug#11214). +# +# 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but +# then attempts to build that file. This forces 'Makefile', 'lib/Makefile', +# etc. to be built without running into similar recursion problems. MAKEFILE_NAME = Makefile $(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \ - $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) - ./config.status + $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk + MAKE='$(MAKE)' ./config.status -# Don't erase config.status if make is interrupted while refreshing it. -.PRECIOUS: config.status +# Don't erase these files if make is interrupted while refreshing them. +.PRECIOUS: Makefile config.status config.status: ${srcdir}/configure ${srcdir}/lisp/version.el if [ -x ./config.status ]; then \ - ./config.status --recheck; \ + $(CFG) ./config.status --recheck; \ else \ - ./configure $(CONFIGURE_FLAGS); \ + $(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \ fi AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4 @@ -383,6 +443,10 @@ AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \ $(srcdir)/lib/gnulib.mk $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS) cd $(srcdir) && automake --gnu -a -c lib/Makefile + +# Regenerate files that this makefile would have made, if this makefile +# had been built by Automake. The name 'am--refresh' is for +# compatibility with subsidiary Automake-generated makefiles. am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in .PHONY: am--refresh @@ -399,14 +463,15 @@ $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS) # ==================== Installation ==================== -.PHONY: install install-arch-dep install-arch-indep install-doc install-info -.PHONY: install-man install-etc install-strip uninstall +.PHONY: install install-arch-dep install-arch-indep install-etcdoc install-info +.PHONY: install-man install-etc install-strip install-$(NTDIR) +.PHONY: uninstall uninstall-$(NTDIR) ## If we let lib-src do its own installation, that means we ## don't have to duplicate the list of utilities to install in ## this Makefile as well. -install: all install-arch-indep install-doc install-arch-dep blessmail +install: all install-arch-indep install-etcdoc install-arch-dep install-$(NTDIR) blessmail @true ## Ensure that $subdir contains a subdirs.el file. @@ -414,32 +479,32 @@ install: all install-arch-indep install-doc install-arch-dep blessmail ## world-readable. ## TODO it might be good to warn about non-standard permissions of ## pre-existing directories, but that does not seem easy. -write_subdir=if [ -f $${subdir}/subdirs.el ]; \ +write_subdir=if [ -f "$${subdir}/subdirs.el" ]; \ then true; \ else \ umask 022; \ - ${MKDIR_P} $${subdir}; \ + ${MKDIR_P} "$${subdir}"; \ (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \ echo " (normal-top-level-add-subdirs-to-load-path))") \ - > $${subdir}/subdirs.el; \ + > "$${subdir}/subdirs.el"; \ fi ### Install the executables that were compiled specifically for this machine. ### We do install-arch-indep first because the executable needs the ### Lisp files and DOC file to work properly. -install-arch-dep: install-arch-indep install-doc - umask 022; ${MKDIR_P} $(DESTDIR)${bindir} +install-arch-dep: src install-arch-indep install-etcdoc install-$(NTDIR) + umask 022; ${MKDIR_P} "$(DESTDIR)${bindir}" cd lib-src && \ - $(MAKE) install $(MFLAGS) prefix=${prefix} \ - exec_prefix=${exec_prefix} bindir=${bindir} \ - libexecdir=${libexecdir} archlibdir=${archlibdir} \ + $(MAKE) install $(MFLAGS) prefix="${prefix}" \ + exec_prefix="${exec_prefix}" bindir="${bindir}" \ + libexecdir="${libexecdir}" archlibdir="${archlibdir}" \ INSTALL_STRIP=${INSTALL_STRIP} if test "${ns_self_contained}" = "no"; then \ - ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \ - chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) ; \ + ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} "$(DESTDIR)${bindir}/$(EMACSFULL)" || exit 1 ; \ + chmod 1755 "$(DESTDIR)${bindir}/$(EMACSFULL)" || true; \ if test "x${NO_BIN_LINK}" = x; then \ - rm -f $(DESTDIR)${bindir}/$(EMACS) ; \ - cd $(DESTDIR)${bindir} && $(LN_S) $(EMACSFULL) $(EMACS); \ + rm -f "$(DESTDIR)${bindir}/$(EMACS)" ; \ + cd "$(DESTDIR)${bindir}" && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \ fi; \ else \ subdir=${ns_appresdir}/site-lisp; \ @@ -447,6 +512,16 @@ install-arch-dep: install-arch-indep install-doc rm -rf ${ns_appresdir}/share; \ fi +### Windows-specific install target for installing programs produced +### in nt/, and its Posix do-nothing shadow. +install-: +install-nt: + cd $(NTDIR) && \ + $(MAKE) install $(MFLAGS) prefix="${prefix}" \ + exec_prefix="${exec_prefix}" bindir="${bindir}" \ + libexecdir="${libexecdir}" archlibdir="${archlibdir}" \ + INSTALL_STRIP=${INSTALL_STRIP} + ## In the share directory, we are deleting: ## applications (with emacs.desktop, also found in etc/) ## emacs (basically empty except for unneeded site-lisp directories) @@ -476,18 +551,19 @@ set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \ ## We delete etc/DOC* because there may be irrelevant DOC files from ## other builds in the source directory. This is ok because we just ## deleted the entire installed etc/ directory and recreated it. -## install-doc installs the relevant DOC. +## install-etcdoc installs the relevant DOC. + +## Note that we install etc/refcards/*.ps if present. +## TODO we should compress these if GZIP_PROG is set. +## It would be simpler to have a separate install rule for etc/refcards +## (maybe move it to doc/refcards?). ## Note that the Makefiles in the etc directory are potentially useful ## in an installed Emacs, so should not be excluded. -## I'm not sure creating locallisppath here serves any useful purpose. -## If it has the default value, then the later write_subdir commands -## will ensure all these components exist. -## This will only do something if locallisppath has a non-standard value. -## Is it really Emacs's job to create those directories? -## Should we also be ensuring they contain subdirs.el files? -## It would be easy to do, just use write_subdir. +## We used to create locallisppath, but if it points to non-standard +## locations, is not really Emacs's job to create these directories, +## so it is no longer done. ## Note that we use tar instead of plain old cp -R/-r because the latter ## is apparently not portable (even in 2012!). @@ -496,145 +572,165 @@ set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \ ## work correctly, and therefore no idea when tar can be replaced. ## See also these comments from 2004 about cp -r working fine: ## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html -install-arch-indep: install-info install-man ${INSTALL_ARCH_INDEP_EXTRA} - umask 022 ; \ - locallisppath='${locallisppath}'; \ - IFS=:; \ - for d in $$locallisppath; do \ - ${MKDIR_P} "$(DESTDIR)$$d"; \ - done +install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA} -set ${COPYDESTS} ; \ unset CDPATH; \ $(set_installuser); \ for dir in ${COPYDIR} ; do \ [ -d $${dir} ] || exit 1 ; \ - dest=$$1 ; shift ; \ - [ -d $${dest} ] && \ - [ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \ - continue ; \ + dest="$$1" ; shift ; \ + if [ -d "$${dest}" ]; then \ + exp_dest=`cd "$${dest}" && /bin/pwd`; \ + [ "$$exp_dest" = "`cd $${dir} && /bin/pwd`" ] && continue ; \ + else true; \ + fi; \ if [ "$${dir}" = "leim/quail" ]; then \ - [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \ + [ "`cd $${dir} && /bin/pwd`" = "`cd ${srcdir}/leim/quail && /bin/pwd`" ] && \ continue ; \ else \ - rm -rf $${dest} ; \ - umask 022; ${MKDIR_P} $${dest} ; \ + rm -rf "$${dest}" ; \ + umask 022; ${MKDIR_P} "$${dest}" ; \ fi ; \ echo "Copying $${dir} to $${dest}..." ; \ (cd $${dir}; tar -chf - . ) \ - | (cd $${dest}; umask 022; \ + | (cd "$${dest}"; umask 022; \ tar -xvf - && cat > /dev/null) || exit 1; \ - [ "$${dir}" != "${srcdir}/etc" ] || rm -f $${dest}/DOC* ; \ - for subdir in `find $${dest} -type d -print` ; do \ - rm -f $${subdir}/.gitignore ; \ - rm -f $${subdir}/.arch-inventory ; \ - rm -f $${subdir}/.DS_Store ; \ - rm -f $${subdir}/\#* ; \ - rm -f $${subdir}/.\#* ; \ - rm -f $${subdir}/*~ ; \ - rm -f $${subdir}/*.orig ; \ - rm -f $${subdir}/ChangeLog* ; \ - [ "$${dir}" != "${srcdir}/etc" ] && \ - rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \ - done ; \ - find $${dest} -exec chown $${installuser} {} ';' ;\ + if [ "$${dir}" = "${srcdir}/etc" ]; then \ + rm -f "$${dest}/DOC"* ; \ + rm -f "$${dest}/refcards"/*.aux "$${dest}/refcards"/*.dvi; \ + rm -f "$${dest}/refcards"/*.log; \ + else true; \ + fi; \ + (cd "$${dest}" || exit 1; \ + for subdir in `find . -type d -print` ; do \ + chmod a+rx $${subdir} ; \ + rm -f $${subdir}/.gitignore ; \ + rm -f $${subdir}/.arch-inventory ; \ + rm -f $${subdir}/.DS_Store ; \ + rm -f $${subdir}/\#* ; \ + rm -f $${subdir}/.\#* ; \ + rm -f $${subdir}/*~ ; \ + rm -f $${subdir}/*.orig ; \ + rm -f $${subdir}/ChangeLog* ; \ + [ "$${dir}" != "${srcdir}/etc" ] && \ + rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \ + done ); \ + find "$${dest}" -exec chown $${installuser} {} ';' ;\ done - -rm -f $(DESTDIR)${leimdir}/leim-list.el - ${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el - -rm -f $(DESTDIR)${lispdir}/subdirs.el - umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir} - subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \ + -rm -f "$(DESTDIR)${leimdir}/leim-list.el" + ${INSTALL_DATA} leim/leim-list.el "$(DESTDIR)${leimdir}/leim-list.el" + -rm -f "$(DESTDIR)${lispdir}/subdirs.el" + umask 022; $(srcdir)/build-aux/update-subdirs "$(DESTDIR)${lispdir}" + subdir="$(DESTDIR)${datadir}/emacs/${version}/site-lisp" ; \ ${write_subdir} - subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \ + subdir="$(DESTDIR)${datadir}/emacs/site-lisp" ; \ ${write_subdir} || true [ -z "${GZIP_PROG}" ] || \ ( echo "Compressing *.el ..." ; \ unset CDPATH; \ thisdir=`/bin/pwd`; \ - for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \ - cd $${thisdir} ; \ - cd $${dir} || exit 1 ; \ + for dir in "$(DESTDIR)${lispdir}" "$(DESTDIR)${leimdir}"; do \ + cd "$${thisdir}" ; \ + cd "$${dir}" || exit 1 ; \ for f in `find . -name "*.elc" -print`; do \ - ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \ + f_el=`echo "$$f" | sed 's/.elc$$/.el/'`; \ + ${GZIP_PROG} -9n "$$f_el" ; \ done ; \ done ) - -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS} + -chmod -R a+r "$(DESTDIR)${datadir}/emacs/${version}" ${COPYDESTS} -# The last chmod isn't needed at present. - -## We install only the relevant DOC file if possible -## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*. -## (Note "otherwise" is inaccurate since 2009-08-23.) +## The above chmods are needed because "umask 022; tar ..." is not +## guaranteed to do the right thing; eg if we are root and tar is +## preserving source permissions. ## Note that install-arch-indep deletes and recreates the entire ## installed etc/ directory, so we need it to run before this does. -install-doc: install-arch-indep +install-etcdoc: src install-arch-indep -unset CDPATH; \ - umask 022; ${MKDIR_P} $(DESTDIR)${docdir} ; \ - if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${docdir}; /bin/pwd` ]; \ + umask 022; ${MKDIR_P} "$(DESTDIR)${etcdocdir}" ; \ + exp_etcdocdir=`cd "$(DESTDIR)${etcdocdir}"; /bin/pwd`; \ + if [ "`cd ./etc; /bin/pwd`" != "$$exp_etcdocdir" ]; \ then \ - fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \ - if [ -f "./etc/DOC-$${fullversion}" ]; \ - then \ - docfile="DOC-$${fullversion}"; \ - else \ - docfile="DOC"; \ - fi; \ - echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \ - ${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${docdir}/$${docfile}; \ + docfile="DOC"; \ + echo "Copying etc/$${docfile} to $(DESTDIR)${etcdocdir} ..." ; \ + ${INSTALL_DATA} etc/$${docfile} "$(DESTDIR)${etcdocdir}/$${docfile}"; \ $(set_installuser); \ - chown $${installuser} $(DESTDIR)${docdir}/$${docfile} || true ; \ + chown $${installuser} "$(DESTDIR)${etcdocdir}/$${docfile}" || true ; \ else true; fi install-info: info - umask 022; ${MKDIR_P} $(DESTDIR)${infodir} + umask 022; ${MKDIR_P} "$(DESTDIR)${infodir}" -unset CDPATH; \ thisdir=`/bin/pwd`; \ - [ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \ - (cd $(DESTDIR)${infodir}; \ + exp_infodir=`cd "$(DESTDIR)${infodir}" && /bin/pwd`; \ + if [ "`cd ${srcdir}/info && /bin/pwd`" = "$$exp_infodir" ]; then \ + true; \ + else \ + (cd "$(DESTDIR)${infodir}"; \ [ -f dir ] || \ - (cd $${thisdir}; \ - ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \ - info_misc=`cd $${thisdir}/doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \ + (cd "$${thisdir}"; \ + ${INSTALL_DATA} ${srcdir}/info/dir "$(DESTDIR)${infodir}/dir") ); \ + info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \ cd ${srcdir}/info ; \ for elt in ${INFO_NONMISC} $${info_misc}; do \ test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \ for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \ - (cd $${thisdir}; \ - ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \ - ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \ - rm -f $(DESTDIR)${infodir}/$$f.gz; \ - ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \ + (cd "$${thisdir}"; \ + ${INSTALL_DATA} ${srcdir}/info/$$f "$(DESTDIR)${infodir}/$$f"); \ + [ -n "${GZIP_PROG}" ] || continue ; \ + rm -f "$(DESTDIR)${infodir}/$$f.gz"; \ + ${GZIP_PROG} -9n "$(DESTDIR)${infodir}/$$f"; \ done; \ - (cd $${thisdir}; \ - ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \ - done) + (cd "$${thisdir}"; \ + ${INSTALL_INFO} --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \ + done; \ + fi +## "gzip || true" is because some gzips exit with non-zero status +## if compression would not reduce the file size. Eg, the gzip in +## OpenBSD 4.9 seems to do this (2013/03). In Emacs, this can +## only happen with the tiny ctags.1 manpage. We don't really care if +## ctags.1 is compressed or not. "gzip -f" is another option here, +## but not sure if portable. install-man: - umask 022; ${MKDIR_P} $(DESTDIR)${man1dir} + umask 022; ${MKDIR_P} "$(DESTDIR)${man1dir}" thisdir=`/bin/pwd`; \ cd ${mansrcdir}; \ for page in *.1; do \ - (cd $${thisdir}; \ - ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}); \ - ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \ - rm -f $(DESTDIR)${man1dir}/$${page}.gz; \ - ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \ + dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \ + (cd "$${thisdir}"; \ + ${INSTALL_DATA} ${mansrcdir}/$${page} "$(DESTDIR)${man1dir}/$${dest}"); \ + [ -n "${GZIP_PROG}" ] || continue ; \ + rm -f "$(DESTDIR)${man1dir}/$${dest}.gz"; \ + ${GZIP_PROG} -9n "$(DESTDIR)${man1dir}/$${dest}" || true; \ done ## Install those items from etc/ that need to end up elsewhere. + +## If you prefer, choose "emacs22" at installation time. +## Note: emacs22 does not have all the resolutions. +EMACS_ICON=emacs + install-etc: - umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir} - ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \ - $(DESTDIR)${desktopdir}/emacs.desktop + umask 022; ${MKDIR_P} "$(DESTDIR)${desktopdir}" + tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \ + emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \ + sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \ + -e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \ + ${srcdir}/etc/emacs.desktop > $${tmp}; \ + ${INSTALL_DATA} $${tmp} "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop"; \ + rm -f $${tmp} thisdir=`/bin/pwd`; \ cd ${iconsrcdir} || exit 1; umask 022 ; \ for dir in */*/apps */*/mimetypes; do \ [ -d $${dir} ] || continue ; \ - ( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \ - for icon in $${dir}/*.*; do \ + ( cd "$${thisdir}"; ${MKDIR_P} "$(DESTDIR)${icondir}/$${dir}" ) ; \ + for icon in $${dir}/${EMACS_ICON}[.-]*; do \ [ -r $${icon} ] || continue ; \ - ( cd $${thisdir}; \ - ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${icon} ) \ + ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \ + dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \ + ( cd "$${thisdir}"; \ + ${INSTALL_DATA} ${iconsrcdir}/$${icon} "$(DESTDIR)${icondir}/$${dir}/$${dest}" ) \ || exit 1; \ done ; \ done @@ -647,48 +743,67 @@ install-strip: ### create (but not the noninstalled files such as `make all' would create). ### ### Don't delete the lisp and etc directories if they're in the source tree. -uninstall: +uninstall: uninstall-$(NTDIR) uninstall-doc cd lib-src && \ $(MAKE) $(MFLAGS) uninstall \ - prefix=${prefix} exec_prefix=${exec_prefix} \ - bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir} + prefix="${prefix}" exec_prefix="${exec_prefix}" \ + bindir="${bindir}" libexecdir="${libexecdir}" \ + archlibdir="${archlibdir}" + -unset CDPATH; \ - for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \ - if [ -d $${dir} ]; then \ - case `cd $${dir} ; /bin/pwd` in \ - `cd ${srcdir} ; /bin/pwd`* ) ;; \ - * ) rm -rf $${dir} ;; \ + for dir in "$(DESTDIR)${lispdir}" "$(DESTDIR)${etcdir}" ; do \ + if [ -d "$${dir}" ]; then \ + case `cd "$${dir}" ; /bin/pwd` in \ + "`cd ${srcdir} ; /bin/pwd`"* ) ;; \ + * ) rm -rf "$${dir}" ;; \ esac ; \ - case $${dir} in \ - $(DESTDIR)${datadir}/emacs/${version}/* ) \ - rm -rf $(DESTDIR)${datadir}/emacs/${version} \ + case "$${dir}" in \ + "$(DESTDIR)${datadir}/emacs/${version}"/* ) \ + rm -rf "$(DESTDIR)${datadir}/emacs/${version}" \ ;; \ esac ; \ fi ; \ done - -rm -rf $(DESTDIR)${libexecdir}/emacs/${version} + -rm -rf "$(DESTDIR)${libexecdir}/emacs/${version}" thisdir=`/bin/pwd`; \ - (info_misc=`cd doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \ - cd $(DESTDIR)${infodir} && \ - for elt in ${INFO_NONMISC} $${info_misc}; do \ - (cd $${thisdir}; \ - $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \ - if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \ - ext=.gz; else ext=; fi; \ - rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \ - done;) - (if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \ + (info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \ + if cd "$(DESTDIR)${infodir}"; then \ + for elt in ${INFO_NONMISC} $${info_misc}; do \ + (cd "$${thisdir}"; \ + $(INSTALL_INFO) --remove --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \ + if [ -n "${GZIP_PROG}" ]; then \ + ext=.gz; else ext=; fi; \ + rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \ + done; \ + fi) + (if [ -n "${GZIP_PROG}" ]; then \ ext=.gz; else ext=; fi; \ - cd ${mansrcdir} && for page in *.1; do \ - rm -f $(DESTDIR)${man1dir}/$$page$$ext; done ) - (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS)) - (cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg ) - -rm -f $(DESTDIR)${desktopdir}/emacs.desktop + if cd ${mansrcdir}; then \ + for page in *.1; do \ + rm -f "$(DESTDIR)${man1dir}"/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \ + fi) + (cd "$(DESTDIR)${bindir}" && rm -f $(EMACSFULL) $(EMACS) || true) + (if cd "$(DESTDIR)${icondir}"; then \ + rm -f hicolor/*x*/apps/${EMACS_NAME}.png \ + hicolor/scalable/apps/${EMACS_NAME}.svg \ + hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \ + fi) + -rm -f "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop" for file in snake-scores tetris-scores; do \ - file=$(DESTDIR)${gamedir}/$${file}; \ - [ -s $${file} ] || rm -f $$file; \ + file="$(DESTDIR)${gamedir}/$${file}"; \ + [ -s "$${file}" ] || rm -f "$$file"; \ done +### Windows-specific uninstall target for removing programs produced +### in nt/, and its Posix do-nothing shadow. +uninstall-: +uninstall-nt: + cd $(NTDIR) && \ + $(MAKE) $(MFLAGS) uninstall \ + prefix="${prefix}" exec_prefix="${exec_prefix}" \ + bindir="${bindir}" libexecdir="${libexecdir}" \ + archlibdir="${archlibdir}" + FRC: # ==================== Cleaning up and miscellanea ==================== @@ -701,16 +816,17 @@ FRC: ### target for GCC does not delete `libgcc.a', because recompiling it ### is rarely necessary and takes a lot of time. mostlyclean: FRC - (cd src; $(MAKE) $(MFLAGS) mostlyclean) - (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean) - (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean) - (cd lib; $(MAKE) $(MFLAGS) mostlyclean) - (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean) - -(cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean) - -(cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean) - -(cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean) - -(cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean) - (cd leim; $(MAKE) $(MFLAGS) mostlyclean) + cd src && $(MAKE) $(MFLAGS) mostlyclean + cd oldXMenu && $(MAKE) $(MFLAGS) mostlyclean + cd lwlib && $(MAKE) $(MFLAGS) mostlyclean + cd lib && $(MAKE) $(MFLAGS) mostlyclean + cd lib-src && $(MAKE) $(MFLAGS) mostlyclean + cd nt && $(MAKE) $(MFLAGS) mostlyclean + -cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean + -cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean + -cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean + -cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean + cd leim && $(MAKE) $(MFLAGS) mostlyclean ### `clean' ### Delete all files from the current directory that are normally @@ -721,16 +837,19 @@ mostlyclean: FRC ### ### Delete `.dvi' files here if they are not part of the distribution. clean: FRC - (cd src; $(MAKE) $(MFLAGS) clean) - (cd oldXMenu; $(MAKE) $(MFLAGS) clean) - (cd lwlib; $(MAKE) $(MFLAGS) clean) - (cd lib; $(MAKE) $(MFLAGS) clean) - (cd lib-src; $(MAKE) $(MFLAGS) clean) - -(cd doc/emacs && $(MAKE) $(MFLAGS) clean) - -(cd doc/misc && $(MAKE) $(MFLAGS) clean) - -(cd doc/lispref && $(MAKE) $(MFLAGS) clean) - -(cd doc/lispintro && $(MAKE) $(MFLAGS) clean) - (cd leim; $(MAKE) $(MFLAGS) clean) + -rm -f etc/emacs.tmpdesktop + cd src && $(MAKE) $(MFLAGS) clean + cd oldXMenu && $(MAKE) $(MFLAGS) clean + cd lwlib && $(MAKE) $(MFLAGS) clean + cd lib && $(MAKE) $(MFLAGS) clean + cd lib-src && $(MAKE) $(MFLAGS) clean + cd nt && $(MAKE) $(MFLAGS) clean + -cd doc/emacs && $(MAKE) $(MFLAGS) clean + -cd doc/misc && $(MAKE) $(MFLAGS) clean + -cd doc/lispref && $(MAKE) $(MFLAGS) clean + -cd doc/lispintro && $(MAKE) $(MFLAGS) clean + cd leim && $(MAKE) $(MFLAGS) clean + cd nextstep && $(MAKE) $(MFLAGS) clean ### `bootclean' ### Delete all files that need to be remade for a clean bootstrap. @@ -746,38 +865,46 @@ top_distclean=\ ${top_bootclean}; \ rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES} distclean: FRC - (cd src; $(MAKE) $(MFLAGS) distclean) - (cd oldXMenu; $(MAKE) $(MFLAGS) distclean) - (cd lwlib; $(MAKE) $(MFLAGS) distclean) - (cd lib; $(MAKE) $(MFLAGS) distclean) - (cd lib-src; $(MAKE) $(MFLAGS) distclean) - (cd doc/emacs && $(MAKE) $(MFLAGS) distclean) - (cd doc/misc && $(MAKE) $(MFLAGS) distclean) - (cd doc/lispref && $(MAKE) $(MFLAGS) distclean) - (cd doc/lispintro && $(MAKE) $(MFLAGS) distclean) - (cd leim; $(MAKE) $(MFLAGS) distclean) - (cd lisp; $(MAKE) $(MFLAGS) distclean) + cd src && $(MAKE) $(MFLAGS) distclean + cd oldXMenu && $(MAKE) $(MFLAGS) distclean + cd lwlib && $(MAKE) $(MFLAGS) distclean + cd lib && $(MAKE) $(MFLAGS) distclean + cd lib-src && $(MAKE) $(MFLAGS) distclean + cd nt && $(MAKE) $(MFLAGS) distclean + cd doc/emacs && $(MAKE) $(MFLAGS) distclean + cd doc/misc && $(MAKE) $(MFLAGS) distclean + cd doc/lispref && $(MAKE) $(MFLAGS) distclean + cd doc/lispintro && $(MAKE) $(MFLAGS) distclean + cd leim && $(MAKE) $(MFLAGS) distclean + cd lisp && $(MAKE) $(MFLAGS) distclean + cd nextstep && $(MAKE) $(MFLAGS) distclean + for dir in test/automated admin/unidata; do \ + [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) distclean); \ + done ${top_distclean} ### `bootstrap-clean' ### Delete everything that can be reconstructed by `make' and that ### needs to be deleted in order to force a bootstrap from a clean state. bootstrap-clean: FRC - (cd src; $(MAKE) $(MFLAGS) bootstrap-clean) - (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean) - (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean) - (cd lib; $(MAKE) $(MFLAGS) maintainer-clean) - (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean) - -(cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean) - -(cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean) - -(cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean) - -(cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean) - (cd leim; $(MAKE) $(MFLAGS) maintainer-clean) - (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean) + cd src && $(MAKE) $(MFLAGS) bootstrap-clean + cd oldXMenu && $(MAKE) $(MFLAGS) maintainer-clean + cd lwlib && $(MAKE) $(MFLAGS) maintainer-clean + cd lib && $(MAKE) $(MFLAGS) maintainer-clean + cd lib-src && $(MAKE) $(MFLAGS) maintainer-clean + cd nt && $(MAKE) $(MFLAGS) maintainer-clean + -cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean + -cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean + -cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean + -cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean + cd leim && $(MAKE) $(MFLAGS) maintainer-clean + cd lisp && $(MAKE) $(MFLAGS) bootstrap-clean + cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean + for dir in test/automated admin/unidata; do \ + [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) bootstrap-clean); \ + done [ ! -f config.log ] || mv -f config.log config.log~ ${top_bootclean} -## configure; make bootstrap replaces the real config.log from configure -## with the truncated one from config.status. The former is more useful. ### `maintainer-clean' ### Delete everything from the current directory that can be @@ -794,8 +921,11 @@ top_maintainer_clean=\ ${top_distclean}; \ rm -fr autom4te.cache maintainer-clean: bootstrap-clean FRC - (cd src; $(MAKE) $(MFLAGS) maintainer-clean) - (cd lisp; $(MAKE) $(MFLAGS) maintainer-clean) + cd src && $(MAKE) $(MFLAGS) maintainer-clean + cd lisp && $(MAKE) $(MFLAGS) maintainer-clean + for dir in test/automated admin/unidata; do \ + [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) maintainer-clean); \ + done ${top_maintainer_clean} ### This doesn't actually appear in the coding standards, but Karl @@ -814,7 +944,7 @@ extraclean: TAGS tags: lib lib-src src cd src; $(MAKE) $(MFLAGS) tags -check: +check: all @if test ! -d test/automated; then \ echo "You do not seem to have the test/ directory."; \ echo "Maybe you are using a release tarfile, rather than a repository checkout."; \ @@ -825,13 +955,75 @@ check: dist: cd ${srcdir}; ./make-dist +DVIS = lispref-dvi lispintro-dvi emacs-dvi misc-dvi +HTMLS = lispref-html lispintro-html emacs-html misc-html +INFOS = lispref-info lispintro-info emacs-info misc-info +PDFS = lispref-pdf lispintro-pdf emacs-pdf misc-pdf +PSS = lispref-ps lispintro-ps emacs-ps misc-ps + +DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS) +$(DOCS): + t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2 + +.PHONY: $(DOCS) docs pdf ps .PHONY: info dvi dist check html info-real force-info check-info-dir -info-real: - (cd doc/emacs; $(MAKE) $(MFLAGS) info) - (cd doc/misc; $(MAKE) $(MFLAGS) info) - (cd doc/lispref; $(MAKE) $(MFLAGS) info) - (cd doc/lispintro; $(MAKE) $(MFLAGS) info) +## TODO add etc/refcards. +docs: $(DOCS) +dvi: $(DVIS) +html: $(HTMLS) +info-real: $(INFOS) +pdf: $(PDFS) +ps: $(PSS) + + +INSTALL_DVI = install-emacs-dvi install-lispref-dvi \ + install-lispintro-dvi install-misc-dvi +INSTALL_HTML = install-emacs-html install-lispref-html \ + install-lispintro-html install-misc-html +INSTALL_PDF = install-emacs-pdf install-lispref-pdf \ + install-lispintro-pdf install-misc-pdf +INSTALL_PS = install-emacs-ps install-lispref-ps \ + install-lispintro-ps install-misc-ps +INSTALL_DOC = $(INSTALL_DVI) $(INSTALL_HTML) $(INSTALL_PDF) $(INSTALL_PS) + +## Install non .info forms of the documentation. +## TODO add etc/refcards. +$(INSTALL_DOC): + t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3 + +.PHONY: $(INSTALL_DOC) install-doc +.PHONY: install-dvi install-html install-pdf install-ps + +install-doc: $(INSTALL_DOC) +install-dvi: $(INSTALL_DVI) +install-html: $(INSTALL_HTML) +install-pdf: $(INSTALL_PDF) +install-ps: $(INSTALL_PS) + + +UNINSTALL_DVI = uninstall-emacs-dvi uninstall-lispref-dvi \ + uninstall-lispintro-dvi uninstall-misc-dvi +UNINSTALL_HTML = uninstall-emacs-html uninstall-lispref-html \ + uninstall-lispintro-html uninstall-misc-html +UNINSTALL_PDF = uninstall-emacs-pdf uninstall-lispref-pdf \ + uninstall-lispintro-pdf uninstall-misc-pdf +UNINSTALL_PS = uninstall-emacs-ps uninstall-lispref-ps \ + uninstall-lispintro-ps uninstall-misc-ps +UNINSTALL_DOC = $(UNINSTALL_DVI) $(UNINSTALL_HTML) $(UNINSTALL_PDF) $(UNINSTALL_PS) + +$(UNINSTALL_DOC): + t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3 + +.PHONY: $(UNINSTALL_DOC) uninstall-doc +.PHONY: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps + +uninstall-doc: $(UNINSTALL_DOC) +uninstall-dvi: $(UNINSTALL_DVI) +uninstall-html: $(UNINSTALL_HTML) +uninstall-pdf: $(UNINSTALL_PDF) +uninstall-ps: $(UNINSTALL_PS) + force-info: # Note that man/Makefile knows how to put the info files in $(srcdir), @@ -853,13 +1045,15 @@ info: force-info fi # The info/dir file must be updated by hand when new manuals are added. +# Cannot add an info/dir entry for efaq-w32 since it is not installed +# on all platforms. check-info-dir: info cd info ; \ missing= ; \ for file in *; do \ test -f "$${file}" || continue ; \ case $${file} in \ - *-[0-9]*|COPYING|dir) continue ;; \ + *-[0-9]*|COPYING|dir|efaq-w32*) continue ;; \ esac ; \ file=`echo $${file} | sed 's/\.info//'` ; \ grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \ @@ -870,12 +1064,6 @@ check-info-dir: info fi ; \ echo "info/dir is OK" -dvi: - (cd doc/emacs; $(MAKE) $(MFLAGS) dvi) - (cd doc/misc; $(MAKE) $(MFLAGS) dvi) - (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi) - (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi) - #### Bootstrapping. ### This first cleans the lisp subdirectory, removing all compiled @@ -883,14 +1071,14 @@ dvi: .PHONY: bootstrap -## configure; make bootstrap replaces the real config.log from configure -## with the truncated one from config.status. The former is more useful. +# Bootstrapping does the following: +# * Remove files to start from a bootstrap-clean slate. +# * Run autogen.sh. +# * Rebuild Makefile, to update the build procedure itself. +# * Do the actual build. bootstrap: bootstrap-clean FRC - if [ -x ./config.status ]; then \ - ./config.status; \ - else \ - ./configure $(CONFIGURE_FLAGS); \ - fi + cd $(srcdir) && ./autogen.sh + $(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile $(MAKE) $(MFLAGS) info all .PHONY: check-declare @@ -900,5 +1088,5 @@ check-declare: echo "You must build Emacs to use this command"; \ exit 1; \ fi - (cd leim; $(MAKE) $(MFLAGS) $@) - (cd lisp; $(MAKE) $(MFLAGS) $@) + cd leim && $(MAKE) $(MFLAGS) $@ + cd lisp && $(MAKE) $(MFLAGS) $@