X-Git-Url: https://code.delx.au/gnu-emacs/blobdiff_plain/c142ce81fc9f5cd852d843fd5cd994155c1051e8..b6c735af3fd1b762b75ceb101b5ff50b4e9a6179:/man/idlwave.texi
diff --git a/man/idlwave.texi b/man/idlwave.texi
index a3c59cff85..42b3bea403 100644
--- a/man/idlwave.texi
+++ b/man/idlwave.texi
@@ -2,125 +2,133 @@
@c %**start of header
@setfilename ../info/idlwave
@settitle IDLWAVE User Manual
-@dircategory Editors
+@dircategory Emacs
@direntry
-* IDLWAVE: (idlwave). Major mode and shell for IDL and WAVE/CL files.
+* IDLWAVE: (idlwave). Major mode and shell for IDL files.
@end direntry
@synindex ky cp
@syncodeindex vr cp
@syncodeindex fn cp
-@set VERSION 3.12
-@set EDITION 1.8
-@set IDLVERSION 5.3
-@set NSYSROUTINES 1226
-@set NSYSKEYWORDS 5230
-@set DATE December 1999
-@set AUTHOR Carsten Dominik
-@set AUTHOR-EMAIL dominik@@astro.uva.nl
-@set MAINTAINER Carsten Dominik
-@set MAINTAINER-EMAIL dominik@@astro.uva.nl
+@set VERSION 5.5
+@set EDITION 5.5
+@set IDLVERSION 6.1
+@set NSYSROUTINES 1850
+@set NSYSKEYWORDS 7685
+@set DATE November, 2004
+@set AUTHOR J.D. Smith & Carsten Dominik
+@set AUTHOR-EMAIL jdsmith@@as.arizona.edu
+@set MAINTAINER J.D. Smith
+@set MAINTAINER-EMAIL jdsmith@@as.arizona.edu
+@set IDLWAVE-HOMEPAGE http://idlwave.org/
@c %**end of header
@finalout
@ifinfo
-This file documents IDLWAVE, a major mode for editing IDL and
-WAVE/CL files with Emacs. It also implements a shell for running IDL as
-a subprocess.@refill
-
-This is edition @value{EDITION} of the IDLWAVE User Manual for
-IDLWAVE @value{VERSION}@refill
-
-Copyright (c) 1999 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim
-copies of this manual provided the copyright notice and
-this permission notice are preserved on all copies.
-
-@ignore
-Permission is granted to process this file through TeX
-and print the results, provided the printed document
-carries a copying permission notice identical to this
-one except for the removal of this paragraph (this
-paragraph not being relevant to the printed manual).
-
-@end ignore
-Permission is granted to copy and distribute modified
-versions of this manual under the conditions for
-verbatim copying, provided that the entire resulting
-derived work is distributed under the terms of a permission
-notice identical to this one.
-
-Permission is granted to copy and distribute
-translations of this manual into another language,
-under the above conditions for modified versions,
-except that this permission notice may be stated in a
-translation approved by the Free Software Foundation.
+This file documents IDLWAVE, a major mode for editing IDL files with
+Emacs, and interacting with an IDL shell run as a subprocess.
+
+This is edition @value{EDITION} of the IDLWAVE User Manual for IDLWAVE
+@value{VERSION}
+
+Copyright @copyright{} 1999, 2000, 2001, 2002, 2003, 2004 Free Software
+Foundation, Inc.
+
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
+
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
+
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
@end ifinfo
@titlepage
@title IDLWAVE User Manual
-@subtitle Major Emacs mode and shell for IDL and WAVE/CL files
+@subtitle Emacs major mode and shell for IDL
@subtitle Edition @value{EDITION}, @value{DATE}
-@author by Carsten Dominik
+@author by J.D. Smith & Carsten Dominik
@page
-Copyright @copyright{} 1999 Free Software Foundation, Inc.
-
-@sp 2
This is edition @value{EDITION} of the @cite{IDLWAVE User Manual} for
-IDLWAVE version @value{VERSION}, @value{DATE}.@refill
-
+IDLWAVE version @value{VERSION}, @value{DATE}.
@sp 2
-
-Permission is granted to make and distribute verbatim
-copies of this manual provided the copyright notice and
-this permission notice are preserved on all copies.
-
-Permission is granted to copy and distribute modified
-versions of this manual under the conditions for
-verbatim copying, provided that the entire resulting
-derive work is distributed under the terms of a permission
-notice identical to this one.
-
-Permission is granted to copy and distribute
-translations of this manual into another language,
-under the above conditions for modified versions,
-except that this permission notice may be stated in a
-translation approved by the Free Software Foundation.
-
+Copyright @copyright{} 1999, 2000, 2001, 2002, 2003, 2004 Free Software
+Foundation, Inc.
+@sp 2
+@cindex Copyright, of IDLWAVE
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
+
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
+
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
@end titlepage
+@contents
+
@page
-@ifinfo
+@ifnottex
+
@node Top, Introduction, (dir), (dir)
-IDLWAVE is a package to support editing command files for the
-Interactive Data Language (IDL), and for running IDL as an inferior
-shell. @refill
+IDLWAVE is a package which supports editing source code written in the
+Interactive Data Language (IDL), and running IDL as an inferior shell.
-@end ifinfo
+@end ifnottex
@menu
-* Introduction:: What IDLWAVE is and what not
+* Introduction:: What IDLWAVE is, and what it is not
* IDLWAVE in a Nutshell:: One page quick-start guide
-* The IDLWAVE Major Mode:: The mode to edit IDL programs
-* The IDLWAVE Shell:: The mode to run IDL as inferior program
+* Getting Started:: Tutorial
+* The IDLWAVE Major Mode:: The mode for editing IDL programs
+* The IDLWAVE Shell:: The mode for running IDL as an inferior program
* Installation:: How to Install or Upgrade
-* Acknowledgement:: Who helped
+* Acknowledgements:: Who did what
* Sources of Routine Info:: How does IDLWAVE know about routine XYZ
-* Configuration Examples:: The user is king...
+* HTML Help Browser Tips::
+* Configuration Examples:: The user is king
+* Windows and MacOS:: What still works, and how
+* Troubleshooting:: When good computers turn bad
* Index:: Fast access
@detailmenu
-
--- The Detailed Node Listing ---
+Getting Started (Tutorial)
+
+* Lesson I -- Development Cycle::
+* Lesson II -- Customization::
+* Lesson III -- User Catalog::
+
The IDLWAVE Major Mode
* Code Formatting:: Making code look nice
-* Routine Info:: Calling Sequences and Keywords
+* Routine Info:: Calling Sequence and Keyword List
+* Online Help:: One key press from source to help
* Completion:: Completing routine names and Keywords
-* Code Templates:: Abbreviations for frequent constructs
+* Routine Source:: Finding routines, the easy way
+* Resolving Routines:: Force the Shell to compile a routine
+* Code Templates:: Frequent code constructs
+* Abbreviations:: Abbreviations for common commands
* Actions:: Changing case, Padding, End checking
* Doc Header:: Inserting a standard header
* Motion Commands:: Moving through the structure of a program
@@ -129,13 +137,28 @@ The IDLWAVE Major Mode
Code Formatting
* Code Indentation:: Reflecting the logical structure
+* Continued Statement Indentation::
* Comment Indentation:: Special indentation for comment lines
* Continuation Lines:: Splitting statements over lines
* Syntax Highlighting:: Font-lock support
+* Octals and Highlighting:: Why "123 causes problems
+
+Online Help
+
+* Help with HTML Documentation::
+* Help with Source::
+
+Completion
+
+* Case of Completed Words:: CaseOFcomPletedWords
+* Object Method Completion and Class Ambiguity:: obj->Method, what?
+* Object Method Completion in the Shell::
+* Class and Keyword Inheritance:: obj->Method, _EXTRA=e
+* Structure Tag Completion:: Completing state.Tag
Actions
-* Block Boundary Check:: Is the END correct
+* Block Boundary Check:: Is the END statement correct?
* Padding Operators:: Enforcing space around `=' etc
* Case Changes:: Enforcing upper case keywords
@@ -143,25 +166,38 @@ The IDLWAVE Shell
* Starting the Shell:: How to launch IDL as a subprocess
* Using the Shell:: Interactively working with the Shell
-* Debugging IDL Programs:: Compilation/Debugging
+* Commands Sent to the Shell::
+* Debugging IDL Programs::
+* Examining Variables::
+* Custom Expression Examination::
Debugging IDL Programs
-* Compiling Programs:: Compiling buffers under the shell
-* Breakpoints and Stepping:: Deciding where to stop and look
-* Examining Variables:: What is the value now?
+* A Tale of Two Modes::
+* Debug Key Bindings::
+* Breakpoints and Stepping::
+* Compiling Programs::
+* Walking the Calling Stack::
+* Electric Debug Mode::
Installation
* Installing IDLWAVE:: How to install the distribution
-* Upgrading from idl.el:: Necessary configuration changes
+* Installing Online Help:: Where to get the additional files needed
Sources of Routine Info
* Routine Definitions:: Where IDL Routines are defined.
-* Routine Information Sources:: So how does IDLWAVE know about...
-* Library Scan:: Scanning the Libraries for Routine Info
-* Updating idlw-rinfo.el:: Scanning the Reference Manual
+* Routine Information Sources:: So how does IDLWAVE know about...
+* Catalogs::
+* Load-Path Shadows:: Routines defined in several places
+* Documentation Scan:: Scanning the IDL Manuals
+
+Catalogs
+
+* Library Catalogs::
+* User Catalog::
+
@end detailmenu
@end menu
@@ -169,118 +205,144 @@ Sources of Routine Info
@chapter Introduction
@cindex Introduction
@cindex CORBA (Common Object Request Broker Architecture)
+@cindex Interface Definition Language
+@cindex Interactive Data Language
@cindex cc-mode.el
+@cindex @file{idl.el}
+@cindex @file{idl-shell.el}
@cindex Feature overview
-IDLWAVE is a package to support editing command files for the
-Interactive Data Language (IDL), and for running IDL as an inferior
-shell. It also can be used for WAVE/CL command files, but the support
-for these is limited. Note that this package has nothing to do with the
-Interface Definition Language as part of the Common Object Request
-Broker Architecture (CORBA).
-
-IDLWAVE is the successor to the @file{idl.el} and @file{idl-shell.el}
-files written by Chris Chase. The modes and files had to be renamed
-because of a name space conflict with CORBAs @code{idl-mode}, defined in
-Emacs in the file @file{cc-mode.el}. If you have been using the old
-files, check @ref{Upgrading from idl.el} for information on how to
-switch.
-
-IDLWAVE consists of two parts: A major mode for editing command files
-(@code{idlwave-mode}) and a mode to allow running the IDL program as an
-inferior shell (@code{idlwave-shell-mode}). Both modes work closely
-together and form a complete development environment.@refill
-
-Here is a brief summary of what IDLWAVE does.
+IDLWAVE is a package which supports editing source files written in
+the Interactive Data Language (IDL@footnote{IDL is a registered
+trademark of Research Systems, Inc., a Kodak Company}), and running
+IDL as an inferior shell@footnote{Note that this package has nothing
+to do with the Interface Definition Language, part of the Common
+Object Request Broker Architecture (CORBA)}@footnote{IDLWAVE can also
+be used for editing source files for the related WAVE/CL language, but
+with only limited support.}. It is a feature-rich replacement for the
+IDLDE development environment bundled with IDL, and uses the full
+power of Emacs to make editing and running IDL programs easier,
+quicker, and more structured.
+
+IDLWAVE consists of two main parts: a major mode for editing IDL
+source files (@code{idlwave-mode}) and a mode for running the IDL
+program as an inferior shell (@code{idlwave-shell-mode}). Although
+one mode can be used without the other, both work together closely to
+form a complete development environment. Here is a brief summary of
+what IDLWAVE does:
@itemize @bullet
@item
-Code indentation and formatting.
+Smart code indentation and automatic-formatting.
@item
-Font-lock support on three levels.
+Three level syntax highlighting support.
@item
-Display of calling sequence and keywords of more than 1000 IDL
-routines.
+Context-sensitive display of calling sequences and keywords for more
+than 1000 native IDL routines, extendible to any additional number of
+local routines, and already available with many pre-scanned libraries.
+@item
+Routine name space conflict search with likelihood-of-use ranking.
@item
-Context sensitive completion of routine names and keywords.
+Fast, context-sensitive online HTML help, or source-header help for
+undocumented routines.
@item
-Insertion of code templates.
+Context sensitive completion of routine names, keywords, system
+variables, class names and much more.
@item
-Actions to enforce coding standards during typing.
+Easy insertion of code templates and abbreviations of common constructs.
@item
-Block structure check.
+Automatic corrections to enforce a variety of customizable coding
+standards.
+@item
+Integrity checks and auto-termination of logical blocks.
+@item
+Support for @file{imenu} (Emacs) and @file{func-menu} (XEmacs).
@item
Documentation support.
@item
-Running IDL as inferior process.
+Running IDL as an inferior Shell with history search, command line
+editing and all the completion and routine info capabilities present in
+IDL source buffers.
@item
-Shell with history search, command line editing and completion.
+Compilation, execution and interactive single-keystroke debugging of
+programs directly from the source buffer.
@item
-Compilation, execution and debugging of programs directly from the source
-buffer.
+Quick, source-guided navigation of the calling stack, with variable
+inspection, etc.
@item
-Examining expressions with a mouse click.
+Examining variables and expressions with a mouse click.
+@item
+And much, much more...
@end itemize
@ifnottex
@cindex Screenshots
-Here are a number of screenshots showing IDLWAVE in action.
+Here are a number of screenshots showing IDLWAVE in action:
+
@itemize @bullet
@item
-@uref{http://www.strw.leidenuniv.nl/~dominik/Tools/idlwave/font-lock.gif,
-XEmacs 21.1 with formatted and fontified code}
+@uref{http://idlwave.org/screenshots/emacs_21_nav.gif,An IDLWAVE buffer}
@item
-@uref{http://www.strw.leidenuniv.nl/~dominik/Tools/idlwave/rinfo.gif,
-XEmacs 21.1 displaying routine info}
+@uref{http://idlwave.org/screenshots/emacs_21_keys.gif,A keyword being completed}
@item
-@uref{http://www.strw.leidenuniv.nl/~dominik/Tools/idlwave/complete.gif,
-XEmacs 21.1 completing a keyword}
+@uref{http://idlwave.org/screenshots/emacs_21_help.gif,Online help text.}
@item
-@uref{http://www.strw.leidenuniv.nl/~dominik/Tools/idlwave/shell.gif,
-XEmacs 21.1 with debugging toolbar; execution stopped at a breakpoint}
+@uref{http://idlwave.org/screenshots/emacs_21_ri.gif,Routine information displayed}
+@item
+@uref{http://idlwave.org/screenshots/emacs_21_bp.gif,Debugging code
+stopped at a breakpoint}
@end itemize
@end ifnottex
-In this manual, each section contains a list of user options related to
-the subject. Don't be confused by the shear number of options available
--- in most cases the default settings are just fine. The variables are
-listed here to make sure you know where to look if you want to change
-things. For a full description of what a particular variable does and
-how to configure it, see the documentation string of that variable.
-Some configuration examples are also given in the appendix.
-
-@node IDLWAVE in a Nutshell, The IDLWAVE Major Mode, Introduction, Top
+IDLWAVE is the distant successor to the @file{idl.el} and
+@file{idl-shell.el} files written by Chris Chase. The modes and files
+had to be renamed because of a name space conflict with CORBA's
+@code{idl-mode}, defined in Emacs in the file @file{cc-mode.el}.
+
+In this manual, each section ends with a list of related user options.
+Don't be confused by the sheer number of options available --- in most
+cases the default settings are just fine. The variables are listed here
+to make sure you know where to look if you want to change anything. For
+a full description of what a particular variable does and how to
+configure it, see the documentation string of that variable (available
+with @kbd{C-h v}). Some configuration examples are also given in the
+appendix.
+
+@node IDLWAVE in a Nutshell, Getting Started, Introduction, Top
@chapter IDLWAVE in a Nutshell
-@cindex Quick-Start
-@cindex Getting Started
+@cindex Summary of important commands
@cindex IDLWAVE in a Nutshell
@cindex Nutshell, IDLWAVE in a
-If you are in a hurry, here is some quick-start information.
-
@subheading Editing IDL Programs
@multitable @columnfractions .15 .85
@item @key{TAB}
@tab Indent the current line relative to context.
-@item @kbd{M-C-\}
+@item @kbd{C-M-\}
@tab Re-indent all lines in the current region.
+@item @kbd{C-u @key{TAB}}
+@tab Re-indent all lines in the current statement.
@item @kbd{M-@key{RET}}
-@tab Start a continuation line. Or split the current line at point.
+@tab Start a continuation line, or split the current line at point.
@item @kbd{M-q}
@tab Fill the current comment paragraph.
@item @kbd{C-c ?}
-@tab Display calling sequence, keywords of the procedure/function call
+@tab Display calling sequence and keywords for the procedure or function call
at point.
+@item @kbd{M-?}
+@tab Load context sensitive online help for nearby routine, keyword, etc.
@item @kbd{M-@key{TAB}}
@tab Complete a procedure name, function name or keyword in the buffer.
@item @kbd{C-c C-i}
@tab Update IDLWAVE's knowledge about functions and procedures.
@item @kbd{C-c C-v}
-@tab Find the source code of a procedure/function.
+@tab Visit the source code of a procedure/function.
+@item @kbd{C-u C-c C-v}
+@tab Visit the source code of a procedure/function in this buffer.
@item @kbd{C-c C-h}
@tab Insert a standard documentation header.
-@item @kbd{C-c C-m}
+@item @kbd{C-c @key{RET}}
@tab Insert a new timestamp and history item in the documentation header.
@end multitable
@@ -289,61 +351,428 @@ at point.
@multitable @columnfractions .15 .85
@item @kbd{C-c C-s}
@tab Start IDL as a subprocess and/or switch to the interaction buffer.
-@item @kbd{C-u C-c C-s}
-@tab Start the shell in a separate frame.
@item @kbd{M-p}
-@tab Cycle back through IDL command history matching command line input.
+@tab Cycle back through IDL command history.
@item @kbd{M-n}
@tab Cycle forward.
-@item @kbd{M-@key{TAB}}
+@item @kbd{@key{TAB}}
@tab Complete a procedure name, function name or keyword in the shell buffer.
@item @kbd{C-c C-d C-c}
@tab Save and compile the source file in the current buffer.
@item @kbd{C-c C-d C-x}
-@tab Goto next syntax error.
+@tab Go to next syntax error.
+@item @kbd{C-c C-d C-v}
+@tab Switch to electric debug mode.
@item @kbd{C-c C-d C-b}
-@tab Set a breakpoint at the current source line.
+@tab Set a breakpoint at the nearest viable source line.
@item @kbd{C-c C-d C-d}
-@tab Clear the current breakpoint.
+@tab Clear the nearest breakpoint.
+@item @kbd{C-c C-d [}
+@tab Go to the previous breakpoint.
+@item @kbd{C-c C-d ]}
+@tab Go to the next breakpoint.
@item @kbd{C-c C-d C-p}
-@tab Ask IDL to print the value of the expression near point.
+@tab Print the value of the expression near point in IDL.
@end multitable
@subheading Commonly used Settings in @file{.emacs}
@lisp
;; Change the indentation preferences
-(setq idlwave-main-block-indent 2 ; default 0
- idlwave-block-indent 2 ; default 4
- idlwave-end-offset -2) ; default -4
-
+(setq idlwave-main-block-indent 2 ; default 0
+ idlwave-block-indent 2 ; default 4
+ idlwave-end-offset -2) ; default -4
+;; Start autoloading routine info after 2 idle seconds
+(setq idlwave-init-rinfo-when-idle-after 2)
+;; Pad some operators with spaces
+(setq idlwave-do-actions t
+ idlwave-surround-by-blank t)
;; Syntax Highlighting
(add-hook 'idlwave-mode-hook 'turn-on-font-lock)
-;; Automatically expand END to ENDIF, ENDELSE, ...
-(setq idlwave-expand-generic-end t)
-
;; Automatically start the shell when needed
(setq idlwave-shell-automatic-start t)
-;; Always use a separate frame for the shell buffer
-(setq idlwave-shell-use-dedicated-frame t)
+;; Bind debugging commands with CONTROL and SHIFT modifiers
+(setq idlwave-shell-debug-modifiers '(control shift))
+@end lisp
+
+@ifhtml
+
+@end ifhtml
+@node Getting Started, The IDLWAVE Major Mode, IDLWAVE in a Nutshell, Top
+@chapter Getting Started (Tutorial)
+@cindex Quick-Start
+@cindex Tutorial
+@cindex Getting Started
+
+@menu
+* Lesson I -- Development Cycle::
+* Lesson II -- Customization::
+* Lesson III -- User Catalog::
+@end menu
+
+@node Lesson I -- Development Cycle, Lesson II -- Customization, Getting Started, Getting Started
+@section Lesson I: Development Cycle
+
+The purpose of this tutorial is to guide you through a very basic
+development cycle using IDLWAVE. We will paste a simple program into
+a buffer and use the shell to compile, debug and run it. On the way
+we will use many of the important IDLWAVE commands. Note, however,
+that IDLWAVE has many more capabilities than covered here, which can
+be discovered by reading the entire manual, or hovering over the
+shoulder of your nearest IDLWAVE guru for a few days.
+
+It is assumed that you have access to Emacs or XEmacs with the full
+IDLWAVE package including online help (@pxref{Installation}). We also
+assume that you are familiar with Emacs and can read the nomenclature of
+key presses in Emacs (in particular, @kbd{C} stands for @key{CONTROL}
+and @kbd{M} for @key{META} (often the @key{ALT} key carries this
+functionality)).
+
+Open a new source file by typing:
+
+@example
+@kbd{C-x C-f tutorial.pro @key{RET}}
+@end example
-;; Specify a file where library info can be stored.
-(setq idlwave-libinfo-file "~/idlinfo.el")
+A buffer for this file will pop up, and it should be in IDLWAVE mode,
+indicated in the mode line just below the editing window. Also, the
+menu bar should contain @samp{IDLWAVE}.
+
+Now cut-and-paste the following code, also available as
+@file{tutorial.pro} in the IDLWAVE distribution.
+
+@example
+function daynr,d,m,y
+ ;; compute a sequence number for a date
+ ;; works 1901-2099.
+ if y lt 100 then y = y+1900
+ if m le 2 then delta = 1 else delta = 0
+ m1 = m + delta*12 + 1
+ y1 = y * delta
+ return, d + floor(m1*30.6)+floor(y1*365.25)+5
+end
+
+function weekday,day,month,year
+ ;; compute weekday number for date
+ nr = daynr(day,month,year)
+ return, nr mod 7
+end
+
+pro plot_wday,day,month
+ ;; Plot the weekday of a date in the first 10 years of this century.
+ years = 2000,+indgen(10)
+ wdays = intarr(10)
+ for i=0,n_elements(wdays)-1 do begin
+ wdays[i] = weekday(day,month,years[i])
+ end
+ plot,years,wdays,YS=2,YT="Wday (0=Sunday)"
+end
+@end example
+
+The indentation probably looks funny, since it's different from the
+settings you use, so use the @key{TAB} key in each line to
+automatically line it up (or, more quickly, @emph{select} the entire
+buffer with @kbd{C-x h}, and indent the whole region with
+@kbd{C-M-\}). Notice how different syntactical elements are
+highlighted in different colors, if you have set up support for
+font-lock.
+
+Let's check out two particular editing features of IDLWAVE. Place the
+cursor after the @code{end} statement of the @code{for} loop and press
+@key{SPC}. IDLWAVE blinks back to the beginning of the block and
+changes the generic @code{end} to the specific @code{endfor}
+automatically (as long as the variable @code{idlwave-expand-generic-end}
+is turned on --- @pxref{Lesson II -- Customization}). Now place the
+cursor in any line you would like to split and press @kbd{M-@key{RET}}.
+The line is split at the cursor position, with the continuation @samp{$}
+and indentation all taken care of. Use @kbd{C-/} to undo the last
+change.
+
+The procedure @code{plot_wday} is supposed to plot the day of the week
+of a given date for the first 10 years of the 21st century. As in
+most code, there are a few bugs, which we are going to use IDLWAVE to
+help us fix.
+
+First, let's launch the IDLWAVE shell. You do this with the command
+@kbd{C-c C-s}. The Emacs window will split or another window will popup
+to display IDL running in a shell interaction buffer. Type a few
+commands like @code{print,!PI} to convince yourself that you can work
+there just as well as in a terminal, or the IDLDE. Use the arrow keys
+to cycle through your command history. Are we having fun now?
+
+Now go back to the source window and type @kbd{C-c C-d C-c} to compile
+the program. If you watch the shell buffer, you see that IDLWAVE types
+@samp{.run tutorial.pro} for you. But the compilation fails because
+there is a comma in the line @samp{years=...}. The line with the error
+is highlighted and the cursor positioned at the error, so remove the
+comma (you should only need to hit @kbd{Delete}!). Compile again, using
+the same keystrokes as before. Notice that the file is automatically
+saved for you. This time everything should work fine, and you should
+see the three routines compile.
+
+Now we want to use the command to plot the day of the week on January
+1st. We could type the full command ourselves, but why do that? Go
+back to the shell window, type @samp{plot_} and hit @key{TAB}. After
+a bit of a delay (while IDLWAVE initializes its routine info database,
+if necessary), the window will split to show all procedures it knows
+starting with that string, and @w{@code{plot_wday}} should be one of
+them. Saving the buffer alerted IDLWAVE about this new routine.
+Click with the middle mouse button on @code{plot_wday} and it will be
+copied to the shell buffer, or if you prefer, add @samp{w} to
+@samp{plot_} to make it unambiguous (depending on what other routines
+starting with @samp{plot_} you have installed on your system), hit
+@key{TAB} again, and the full routine name will be completed. Now
+provide the two arguments:
+
+@example
+plot_wday,1,1
+@end example
+
+@noindent and press @key{RET}. This fails with an error message telling
+you the @code{YT} keyword to plot is ambiguous. What are the allowed
+keywords again? Go back to the source window and put the cursor into
+the `plot' line and press @kbd{C-c ?}. This shows the routine info
+window for the plot routine, which contains a list of keywords, along
+with the argument list. Oh, we wanted @code{YTITLE}. Fix that up.
+Recompile with @kbd{C-c C-d C-c}. Jump back into the shell with
+@kbd{C-c C-s}, press the @key{UP} arrow to recall the previous command
+and execute again.
+
+This time we get a plot, but it is pretty ugly --- the points are all
+connected with a line. Hmm, isn't there a way for @code{plot} to use
+symbols instead? What was that keyword? Position the cursor on the
+plot line after a comma (where you'd normally type a keyword), and hit
+@kbd{M-@key{Tab}}. A long list of plot's keywords appears. Aha,
+there it is, @code{PSYM}. Middle click to insert it. An @samp{=}
+sign is included for you too. Now what were the values of @code{PSYM}
+supposed to be? With the cursor on or after the keyword, press
+@kbd{M-?} for online help (alternatively, you could have right clicked
+on the colored keyword itself in the completion list). A browser will
+pop up showing the HTML documentation for the @code{PYSM} keyword.
+OK, let's use diamonds=4. Fix this, recompile (you know the command
+by now: @kbd{C-c C-d C-c}), go back to the shell (if it's vanished,
+you know what to do: @kbd{C-c C-s}) and execute again. Now things
+look pretty good.
+
+Let's try a different day --- how about April fool's day?
+
+@example
+plot_wday,1,4
+@end example
+
+Oops, this looks very wrong. All April fool's days cannot be Fridays!
+We've got a bug in the program, perhaps in the @code{daynr} function.
+Let's put a breakpoint on the last line there. Position the cursor on
+the @samp{return, d+...} line and press @kbd{C-c C-d C-b}. IDL sets a
+breakpoint (as you see in the shell window), and the break line is
+indicated. Back to the shell buffer, re-execute the previous command.
+IDL stops at the line with the breakpoint. Now hold down the SHIFT
+key and click with the middle mouse button on a few variables there:
+@samp{d}, @samp{y}, @samp{m}, @samp{y1}, etc. Maybe @code{d} isn't
+the correct type. CONTROL-SHIFT middle-click on it for help. Well,
+it's an integer, so that's not the problem. Aha, @samp{y1} is zero,
+but it should be the year, depending on delta. Shift click
+@samp{delta} to see that it's 0. Below, we see the offending line:
+@samp{y1=y*delta...} the multiplication should have been a minus sign!
+Hit @kbd{q} to exit the debugging mode, and fix the line to read:
+
+@example
+y1 = y - delta
+@end example
+
+Now remove all breakpoints: @kbd{C-c C-d C-a}. Recompile and rerun the
+command. Everything should now work fine. How about those leap years?
+Change the code to plot 100 years and see that every 28 years, the
+sequence of weekdays repeats.
+
+@node Lesson II -- Customization, Lesson III -- User Catalog, Lesson I -- Development Cycle, Getting Started
+@section Lesson II: Customization
+
+Emacs is probably the most customizable piece of software ever
+written, and it would be a shame if you did not make use of this and
+adapt IDLWAVE to your own preferences. Customizing Emacs or IDLWAVE
+is accomplished by setting Lisp variables in the @file{.emacs} file in
+your home directory --- but do not be dismayed; for the most part, you
+can just copy and work from the examples given here.
+
+Let's first use a boolean variable. These are variables which you turn
+on or off, much like a checkbox. A value of @samp{t} means on, a value
+of @samp{nil} means off. Copy the following line into your
+@file{.emacs} file, exit and restart Emacs.
+
+@lisp
+(setq idlwave-reserved-word-upcase t)
+@end lisp
+
+When this option is turned on, each reserved word you type into an IDL
+source buffer will be converted to upper case when you press @key{SPC}
+or @key{RET} right after the word. Try it out! @samp{if} changes to
+@samp{IF}, @samp{begin} to @samp{BEGIN}. If you don't like this
+behavior, remove the option again from your @file{.emacs} file and
+restart Emacs.
+
+You likely have your own indentation preferences for IDL code. For
+example, some like to indent the main block of an IDL program from the
+margin, different from the conventions used by RSI, and use only 3
+spaces as indentation between @code{BEGIN} and @code{END}. Try the
+following lines in @file{.emacs}:
+
+@lisp
+(setq idlwave-main-block-indent 2)
+(setq idlwave-block-indent 3)
+(setq idlwave-end-offset -3)
+@end lisp
+
+Restart Emacs, and re-indent the program we developed in the first part
+of this tutorial with @kbd{C-c h} and @kbd{C-M-\}. You may want to keep
+these lines in @file{.emacs}, with values adjusted to your likings. If
+you want to get more information about any of these variables, type,
+e.g., @kbd{C-h v idlwave-main-block-indent @key{RET}}. To find which
+variables can be customized, look for items marked @samp{User Option:}
+throughout this manual.
+
+If you cannot seem to master this Lisp customization in @file{.emacs},
+there is another, more user-friendly way to customize all the IDLWAVE
+variables. You can access it through the IDLWAVE menu in one of the
+@file{.pro} buffers, menu item @code{Customize->Browse IDLWAVE
+Group}. Here you'll be presented with all the various variables grouped
+into categories. You can navigate the hierarchy (e.g. @samp{IDLWAVE
+Code Formatting->Idlwave Abbrev And Indent Action->Idlwave Expand
+Generic End} to turn on @code{END} expansion), read about the variables,
+change them, and `Save for Future Sessions'. Few of these variables
+need customization, but you can exercise considerable control over
+IDLWAVE's functionality with them.
+
+You may also find the key bindings used for the debugging commands too
+long and complicated. Often we have heard complaints along the lines
+of, ``Do I really have to go through the finger gymnastics of @kbd{C-c
+C-d C-c} to run a simple command?'' Due to Emacs rules and
+conventions, shorter bindings cannot be set by default, but you can
+easily enable them. First, there is a way to assign all debugging
+commands in a single sweep to another simpler combination. The only
+problem is that we have to use something which Emacs does not need for
+other important commands. One good option is to execute debugging
+commands by holding down @key{CONTROL} and @key{SHIFT} while pressing
+a single character: @kbd{C-S-b} for setting a breakpoint, @kbd{C-S-c}
+for compiling the current source file, @kbd{C-S-a} for deleting all
+breakpoints (try it, it's easier). You can enable this with:
+
+@lisp
+(setq idlwave-shell-debug-modifiers '(shift control))
+@end lisp
+
+@noindent If you have a special keyboard with, for example, a
+@key{SUPER} key, you could even shorten that:
+
+@lisp
+(setq idlwave-shell-debug-modifiers '(super))
+@end lisp
+
+@noindent to get compilation on @kbd{S-c}. Often, a modifier key like
+@key{SUPER} or @key{HYPER} is bound or can be bound to an otherwise
+unused key on your keyboard --- consult your system documentation.
+
+You can also assign specific commands to keys. This you must do in the
+@emph{mode-hook}, a special function which is run when a new IDLWAVE
+buffer gets set up. The possibilities for key customization are
+endless. Here we set function keys f4-f8 to common debugging commands.
+
+@lisp
+;; First for the source buffer
+(add-hook 'idlwave-mode-hook
+ (lambda ()
+ (local-set-key [f4] 'idlwave-shell-retall)
+ (local-set-key [f5] 'idlwave-shell-break-here)
+ (local-set-key [f6] 'idlwave-shell-clear-current-bp)
+ (local-set-key [f7] 'idlwave-shell-cont)
+ (local-set-key [f8] 'idlwave-shell-clear-all-bp)))
+;; Then for the shell buffer
+(add-hook 'idlwave-shell-mode-hook
+ (lambda ()
+ (local-set-key [f4] 'idlwave-shell-retall)
+ (local-set-key [f5] 'idlwave-shell-break-here)
+ (local-set-key [f6] 'idlwave-shell-clear-current-bp)
+ (local-set-key [f7] 'idlwave-shell-cont)
+ (local-set-key [f8] 'idlwave-shell-clear-all-bp)))
@end lisp
-@node The IDLWAVE Major Mode, The IDLWAVE Shell, IDLWAVE in a Nutshell, Top
+@node Lesson III -- User Catalog, , Lesson II -- Customization, Getting Started
+@section Lesson III: User and Library Catalogs
+
+We have already used the routine info display in the first part of this
+tutorial. This was the invoked using @kbd{C-c ?}, and displays
+information about the IDL routine near the cursor position. Wouldn't it
+be nice to have the same kind of information available for your own
+routines and for the huge amount of code in major libraries like JHUPL
+or the IDL-Astro library? In many cases, you may already have this
+information. Files named @file{.idlwave_catalog} in library directories
+contain scanned information on the routines in that directory; many
+popular libraries ship with these ``library catalogs'' pre-scanned.
+Users can scan their own routines in one of two ways: either using the
+supplied tool to scan directories and build their own
+@file{.idlwave_catalog} files, or using the built-in method to create a
+single ``user catalog'', which we'll show here. @xref{Catalogs}, for
+more information on choosing which method to use.
+
+To build a user catalog, select @code{Routine Info/Select Catalog
+Directories} from the IDLWAVE entry in the menu bar. If necessary,
+start the shell first with @kbd{C-c C-s} (@pxref{Starting the Shell}).
+IDLWAVE will find out about the IDL @code{!PATH} variable and offer a
+list of directories on the path. Simply select them all (or whichever
+you want --- directories with existing library catalogs will not be
+selected by default) and click on the @samp{Scan&Save} button. Then
+go for a cup of coffee while IDLWAVE collects information for each and
+every IDL routine on your search path. All this information is
+written to the file @file{.idlwave/idlusercat.el} in your home
+directory and will from now on automatically load whenever you use
+IDLWAVE. You may find it necessary to rebuild the catalog on occasion
+as your local libraries change, or build a library catalog for those
+directories instead. Invoke routine info (@kbd{C-c ?}) or completion
+(@kbd{M-@key{TAB}}) on any routine or partial routine name you know to
+be located in the library. E.g., if you have scanned the IDL-Astro
+library:
+
+@example
+ a=readf@key{M-@key{TAB}}
+@end example
+
+expands to `readfits('. Then try
+
+@example
+ a=readfits(@key{C-c ?}
+@end example
+
+and you get:
+
+@example
+Usage: Result = READFITS(filename, header, heap)
+...
+@end example
+
+I hope you made it until here. Now you are set to work with IDLWAVE.
+On the way you will want to change other things, and to learn more
+about the possibilities not discussed in this short tutorial. Read
+the manual, look at the documentation strings of interesting variables
+(with @kbd{C-h v idlwave<-variable-name> @key{RET}}) and ask the
+remaining questions on the newsgroup @code{comp.lang.idl-pvwave}.
+
+@node The IDLWAVE Major Mode, The IDLWAVE Shell, Getting Started, Top
@chapter The IDLWAVE Major Mode
@cindex IDLWAVE major mode
@cindex Major mode, @code{idlwave-mode}
-The IDLWAVE major mode supports editing IDL and WAVE/CL command files.
-In this chapter we describe the main features of the mode and how to
-customize them.
+The IDLWAVE major mode supports editing IDL source files. In this
+chapter we describe the main features of the mode and how to customize
+them.
@menu
* Code Formatting:: Making code look nice
-* Routine Info:: Calling Sequences and Keywords
+* Routine Info:: Calling Sequence and Keyword List
+* Online Help:: One key press from source to help
* Completion:: Completing routine names and Keywords
-* Code Templates:: Abbreviations for frequent constructs
+* Routine Source:: Finding routines, the easy way
+* Resolving Routines:: Force the Shell to compile a routine
+* Code Templates:: Frequent code constructs
+* Abbreviations:: Abbreviations for common commands
* Actions:: Changing case, Padding, End checking
* Doc Header:: Inserting a standard header
* Motion Commands:: Moving through the structure of a program
@@ -357,53 +786,141 @@ customize them.
@menu
* Code Indentation:: Reflecting the logical structure
+* Continued Statement Indentation::
* Comment Indentation:: Special indentation for comment lines
* Continuation Lines:: Splitting statements over lines
* Syntax Highlighting:: Font-lock support
+* Octals and Highlighting:: Why "123 causes problems
@end menu
-@node Code Indentation, Comment Indentation, Code Formatting, Code Formatting
+The IDL language, with its early roots in FORTRAN, modern
+implementation in C, and liberal borrowing of features of many vector
+and other languages along its 25+ year history, has inherited an
+unusual mix of syntax elements. Left to his or her own devices, a
+novice IDL programmer will often conjure code which is very difficult
+to read and impossible to adapt. Much can be gleaned from studying
+available IDL code libraries for coding style pointers, but, due to
+the variety of IDL syntax elements, replicating this style can be
+challenging at best. Luckily, IDLWAVE understands the structure of
+IDL code very well, and takes care of almost all formatting issues for
+you. After configuring it to match your coding standards, you can
+rely on it to help keep your code neat and organized.
+
+
+@node Code Indentation, Continued Statement Indentation, Code Formatting, Code Formatting
@subsection Code Indentation
@cindex Code indentation
@cindex Indentation
Like all Emacs programming modes, IDLWAVE performs code indentation.
The @key{TAB} key indents the current line relative to context.
-@key{LFD} insert a newline and indents the new line. The indentation is
-governed by a number of variables.
+@key{LFD} insert a newline and indents the new line. The indentation is
+governed by a number of variables. IDLWAVE indents blocks (between
+@code{PRO}/@code{FUNCTION}/@code{BEGIN} and @code{END}), and
+continuation lines.
@cindex Foreign code, adapting
@cindex Indentation, of foreign code
+@kindex C-M-\
To re-indent a larger portion of code (e.g. when working with foreign code
-written with different conventions), use @kbd{M-C-\}
+written with different conventions), use @kbd{C-M-\}
(@code{indent-region}) after marking the relevant code. Useful marking
-commands are @kbd{C-x h} (the entire file) or @kbd{M-C-h} (the
+commands are @kbd{C-x h} (the entire file) or @kbd{C-M-h} (the
current subprogram). @xref{Actions}, for information how to impose
additional formatting conventions on foreign code.
@defopt idlwave-main-block-indent (@code{0})
Extra indentation for the main block of code. That is the block between
the FUNCTION/PRO statement and the END statement for that program
-unit.@refill
+unit.
@end defopt
@defopt idlwave-block-indent (@code{4})
Extra indentation applied to block lines. If you change this, you
-probably also want to change @code{idlwave-end-offset}.@refill
+probably also want to change @code{idlwave-end-offset}.
@end defopt
@defopt idlwave-end-offset (@code{-4})
Extra indentation applied to block END lines. A value equal to negative
@code{idlwave-block-indent} will make END lines line up with the block
-BEGIN lines.@refill
+BEGIN lines.
@end defopt
+@node Continued Statement Indentation, Comment Indentation, Code Indentation, Code Formatting
+@subsection Continued Statement Indentation
+@cindex Indentation, continued statement
+@cindex Continued statement indentation
+Continuation lines (following a line ending with @code{$}) can receive a
+fixed indentation offset from the main level, but in several situations
+IDLWAVE can use a special form of indentation which aligns continued
+statements more naturally. Special indentation is calculated for
+continued routine definition statements and calls, enclosing parentheses
+(like function calls, structure/class definitions, explicit structures
+or lists, etc.), and continued assignments. An attempt is made to line
+up with the first non-whitespace character after the relevant opening
+punctuation mark (@code{,},@code{(},@code{@{},@code{[},@code{=}). For
+lines without any non-comment characters on the line with the opening
+punctuation, the continued line(s) are aligned just past the
+punctuation. An example:
+
+@example
+function foo, a, b, $
+ c, d
+ bar = sin( a + b + $
+ c + d)
+end
+@end example
+@noindent
+
+The only drawback to this special continued statement indentation is
+that it consumes more space, e.g., for long function names or left hand
+sides of an assignment:
+
+@example
+function thisfunctionnameisverylongsoitwillleavelittleroom, a, b, $
+ c, d
+@end example
+
+You can instruct IDLWAVE when to avoid using this special continuation
+indentation by setting the variable
+@code{idlwave-max-extra-continuation-indent}, which specifies the
+maximum additional indentation beyond the basic indent to be
+tolerated, otherwise defaulting to a fixed-offset from the enclosing
+indent (the size of which offset is set in
+@code{idlwave-continuation-indent}). As a special case, continuations
+of routine calls without any arguments or keywords will @emph{not}
+align the continued line, under the assumption that you continued
+because you needed the space.
+
+Also, since the indentation level can be somewhat dynamic in continued
+statements with special continuation indentation, especially if
+@code{idlwave-max-extra-continuation-indent} is small, the key
+@kbd{C-u @key{TAB}} will re-indent all lines in the current statement.
+Note that @code{idlwave-indent-to-open-paren}, if non-@code{nil}, overrides
+the @code{idlwave-max-extra-continuation-indent} limit, for
+parentheses only, forcing them always to line up.
+
+
@defopt idlwave-continuation-indent (@code{2})
-Extra indentation applied to continuation lines and insided unbalanced
-parenthesis.@refill
+Extra indentation applied to normal continuation lines.
+@end defopt
+
+@defopt idlwave-max-extra-continuation-indent (@code{20})
+The maximum additional indentation (over the basic continuation-indent)
+that will be permitted for special continues. To effectively disable
+special continuation indentation, set to @code{0}. To enable it
+constantly, set to a large number (like @code{100}). Note that the
+indentation in a long continued statement never decreases from line to
+line, outside of nested parentheses statements.
+@end defopt
+
+@defopt idlwave-indent-to-open-paren (@code{t})
+Non-@code{nil} means indent continuation lines to innermost open
+parenthesis, regardless of whether the
+@code{idlwave-max-extra-continuation-indent} limit is satisfied.
@end defopt
-@node Comment Indentation, Continuation Lines, Code Indentation, Code Formatting
+@node Comment Indentation, Continuation Lines, Continued Statement Indentation, Code Formatting
@subsection Comment Indentation
@cindex Comment indentation
@cindex Hanging paragraphs
@@ -420,68 +937,71 @@ unchanged.
@item @code{;;}
@tab Lines starting with two semicolons are indented like the surrounding code.
@item @code{;}
-@tab Lines starting with a single semicolon are indent to a minimum column.
+@tab Lines starting with a single semicolon are indented to a minimum column.
@end multitable
+@noindent
The indentation of comments starting in column 0 is never changed.
@defopt idlwave-no-change-comment
-The indentation of a comment that starts with this regular
-expression will not be changed.
+The indentation of a comment starting with this regexp will not be
+changed.
@end defopt
@defopt idlwave-begin-line-comment
-A comment anchored at the beginning of line. A comment matched by this
-regular expression will not have its indentation changed.@refill
+A comment anchored at the beginning of line.
@end defopt
@defopt idlwave-code-comment
-A comment that starts with this regular expression on a line by itself
-is indented as if it is a part of IDL code.@refill
+A comment that starts with this regexp is indented as if it is a part of
+IDL code.
@end defopt
@node Continuation Lines, Syntax Highlighting, Comment Indentation, Code Formatting
@subsection Continuation Lines and Filling
@cindex Continuation lines
@cindex Line splitting
+@cindex String splitting
@cindex Splitting, of lines
-@cindex Filling
-@cindex @code{auto-fill-mode}
-@cindex Hanging paragraphs
+@kindex M-@key{RET}
In IDL, a newline character terminates a statement unless preceded by a
@samp{$}. If you would like to start a continuation line, use
-@kbd{M-@key{RET}} which calls the command @code{idlwave-split-line}. It
-inserts a @samp{$} to indicate that the following line is a continuation
-of the current line, terminates the line with a newline and indents the
-new line. The command @kbd{M-@key{RET}} can also be used in the middle
-of a line to split the line at that point. When used inside a long
-string constant, the string is split with the @samp{+} concatenation
-operator. You could even use @code{auto-fill-mode} to automatically
-break code lines into several lines while you type. For this, set the
-variable @code{idlwave-fill-comment-line-only} to @code{nil} and turn on
-@code{auto-fill-mode}. @code{auto-fill-mode} can be toggled with
-@kbd{C-c C-a}.
+@kbd{M-@key{RET}}, which calls the command @code{idlwave-split-line}.
+It inserts the continuation character @samp{$}, terminates the line and
+indents the new line. The command @kbd{M-@key{RET}} can also be invoked
+inside a string to split it at that point, in which case the @samp{+}
+concatenation operator is used.
+@cindex Filling
+@cindex @code{auto-fill-mode}
+@cindex Hanging paragraphs
When filling comment paragraphs, IDLWAVE overloads the normal filling
-functions and uses a function which creates hanging paragraphs as they
-are customary in the IDL routine headers. When @code{auto-fill-mode} is
-turned on, comments will be auto-filled. If the first line of a
-paragraph is matched by @code{idlwave-hang-indent-regexp}, subsequent
-lines are indented to after the position of this match, as in the
-following example.
+functions and uses a function which creates the hanging paragraphs
+customary in IDL routine headers. When @code{auto-fill-mode} is turned
+on (toggle with @kbd{C-c C-a}), comments will be auto-filled. If the
+first line of a paragraph contains a match for
+@code{idlwave-hang-indent-regexp} (a dash-space by default), subsequent
+lines are positioned to line up after it, as in the following example.
@example
-; INPUTS
+@group
+;=================================
; x - an array containing
; lots of interesting numbers.
;
; y - another variable where
; a hanging paragraph is used
; to describe it.
+;=================================
+@end group
@end example
-You also refill a comment paragraph with @kbd{M-q}.
+@kindex M-q
+You can also refill a comment at any time paragraph with @kbd{M-q}.
+Comment delimiting lines as in the above example, consisting of one or
+more @samp{;} followed by one or more of the characters @samp{+=-_*},
+are kept in place, as is.
@defopt idlwave-fill-comment-line-only (@code{t})
Non-@code{nil} means auto fill will only operate on comment lines.
@@ -497,298 +1017,893 @@ Non-@code{nil} means @code{idlwave-split-line} will split strings with
@samp{+}.
@end defopt
-@defopt idlwave-hanging-indent
+@defopt idlwave-hanging-indent (@code{t})
Non-@code{nil} means comment paragraphs are indented under the hanging
indent given by @code{idlwave-hang-indent-regexp} match in the first
-line of the paragraph.@refill
+line of the paragraph.
@end defopt
-@defopt idlwave-hang-indent-regexp
+@defopt idlwave-hang-indent-regexp (@code{"- "})
Regular expression matching the position of the hanging indent
-in the first line of a comment paragraph.@refill
+in the first line of a comment paragraph.
@end defopt
@defopt idlwave-use-last-hang-indent (@code{nil})
Non-@code{nil} means use last match on line for
-@code{idlwave-indent-regexp}.@refill
+@code{idlwave-indent-regexp}.
@end defopt
-@node Syntax Highlighting, , Continuation Lines, Code Formatting
+@node Syntax Highlighting, Octals and Highlighting, Continuation Lines, Code Formatting
@subsection Syntax Highlighting
@cindex Syntax highlighting
+@cindex Highlighting of syntax
@cindex Font lock
Highlighting of keywords, comments, strings etc. can be accomplished
-with @code{font-lock}. To enable @code{font-lock} for IDL files, place
-the following line into your @file{.emacs} (see
-@ref{Configuration Examples})@refill
+with @code{font-lock}. If you are using @code{global-font-lock-mode}
+(in Emacs), or have @code{font-lock} turned on in any other buffer in
+XEmacs, it should also automatically work in IDLWAVE buffers. If you'd
+prefer invoking font-lock individually by mode, you can enforce it in
+@code{idlwave-mode} with the following line in your @file{.emacs}:
@lisp
(add-hook 'idlwave-mode-hook 'turn-on-font-lock)
@end lisp
-IDLWAVE supports 3 levels of syntax highlighting. The variable
-@code{font-lock-maximum-decoration} determines which level is selected.
+@noindent IDLWAVE supports 3 increasing levels of syntax highlighting.
+The variable @code{font-lock-maximum-decoration} determines which level
+is selected. Individual categories of special tokens can be selected
+for highlighting using the variable
+@code{idlwave-default-font-lock-items}.
@defopt idlwave-default-font-lock-items
Items which should be fontified on the default fontification level
-2.@refill
+2.
@end defopt
-@node Routine Info, Completion, Code Formatting, The IDLWAVE Major Mode
+@node Octals and Highlighting, , Syntax Highlighting, Code Formatting
+@subsection Octals and Highlighting
+@cindex Syntax highlighting, Octals
+@cindex Highlighting of syntax, Octals
+
+A rare syntax highlighting problem results from an extremely unfortunate
+notation for octal numbers in IDL: @code{"123}. This unpaired quotation
+mark is very difficult to parse, given that it can be mixed on a single
+line with any number of strings. Emacs will incorrectly identify this
+as a string, and the highlighting of following lines of code can be
+distorted, since the string is never terminated.
+
+One solution to this involves terminating the mistakenly identified
+string yourself by providing a closing quotation mark in a comment:
+
+@example
+ string("305B) + $ ;" <--- for font-lock
+ ' is an Angstrom.'
+@end example
+
+@noindent A far better solution is to abandon this notation for octals
+altogether, and use the more sensible alternative IDL provides:
+
+@example
+ string('305'OB) + ' is an Angstrom.'
+@end example
+
+@noindent This simultaneously solves the font-lock problem and is more
+consistent with the notation for hexadecimal numbers, e.g. @code{'C5'XB}.
+
+@node Routine Info, Online Help, Code Formatting, The IDLWAVE Major Mode
@section Routine Info
@cindex Routine info
-
-IDL defines more than one thousand procedures, functions and object
-methods. This large command set makes it difficult to remember the
-calling sequence and keywords of a command. IDLWAVE contains a list of
-all builtin routines with calling sequences and keywords@footnote{This
-list was created by scanning the IDL manual and might contain (very few)
-errors. Please report any detected errors to the maintainer, so that
-they can be fixed.}. It also scans Emacs buffers and library files for
-routine definitions and queries the IDLWAVE-Shell for the properties of
-modules currently compiled under the shell. When you have edited a
-buffer or compiled additional routines under the shell, use @kbd{C-c
-C-i} (@code{idlwave-update-routine-info}) to update IDLWAVE's idea about
-these routines.@refill
-
-To display the information about a routine, press @kbd{C-c ?} which
+@cindex Updating routine info
+@cindex Scanning buffers for routine info
+@cindex Buffers, scanning for routine info
+@cindex Shell, querying for routine info
+
+@kindex C-c C-i
+IDL comes bundled with more than one thousand procedures, functions
+and object methods, and large libraries typically contain hundreds or
+even thousands more (each with a few to tens of keywords and
+arguments). This large command set can make it difficult to remember
+the calling sequence and keywords for the routines you use, but
+IDLWAVE can help. It builds up routine information from a wide
+variety of sources; IDLWAVE in fact knows far more about the
+@samp{.pro} routines on your system than IDL itself! It maintains a
+list of all built-in routines, with calling sequences and
+keywords@footnote{This list is created by scanning the IDL manuals and
+might contain (very few) errors. Please report any errors to the
+maintainer, so that they can be fixed.}. It also scans Emacs buffers
+for routine definitions, queries the IDLWAVE-Shell for information
+about routines currently compiled there, and automatically locates
+library and user-created catalogs. This information is updated
+automatically, and so should usually be current. To force a global
+update and refresh the routine information, use @kbd{C-c C-i}
+(@code{idlwave-update-routine-info}).
+
+@kindex C-c ?
+To display the information about a routine, press @kbd{C-c ?}, which
calls the command @code{idlwave-routine-info}. When the current cursor
position is on the name or in the argument list of a procedure or
function, information will be displayed about the routine. For example,
-consider the cursor positions in the following line
+consider the indicated cursor positions in the following line:
@example
plot,x,alog(x+5*sin(x) + 2),
+ | | | | | | | |
1 2 3 4 5 6 7 8
@end example
-@cindex Object methods
+@cindex Default routine, for info and help
On positions 1,2 and 8, information about the @samp{plot} procedure will
be shown. On positions 3,4, and 7, the @samp{alog} function will be
-described, while positions 5 and 6 will select the @samp{sin} function.
+described, while positions 5 and 6 will investigate the @samp{sin}
+function.
+
When you ask for routine information about an object method, and the
method exists in several classes, IDLWAVE queries for the class of the
-object.
+object, unless the class is already known through a text property on the
+@samp{->} operator (@pxref{Object Method Completion and Class
+Ambiguity}), or by having been explicity included in the call
+(e.g. @code{a->myclass::Foo}).
@cindex Calling sequences
@cindex Keywords of a routine
+@cindex Routine source information
The description displayed contains the calling sequence, the list of
-keywords and the origin of this information (@emph{system routine},
-@emph{library routine}, @emph{Emacs buffer}, or @emph{compiled
-module}). It looks like this:
+keywords and the source location of this routine. It looks like this:
@example
-Usage: MAP_PROJ_INFO, iproj
-Keywords: CIRCLE CURRENT CYLINDRICAL NAME UV_LIMITS WIDTH
-Origin: buffer visiting /soft1/idl/lib/map_set.pro
+Usage: XMANAGER, NAME, ID
+Keywords: BACKGROUND CATCH CLEANUP EVENT_HANDLER GROUP_LEADER
+ JUST_REG MODAL NO_BLOCK
+Source: SystemLib [LCSB] /soft1/idl53/lib/xmanager.pro
@end example
-Some of the text in the @file{*Help*} buffer will be active (it
-highlights when you move the mouse over it). Clicking with the middle
-mouse button on any of the active fields will try to find the source file of
-the routine and display it in another window. Another click on the same
-line will switch back to the buffer from which @kbd{C-c ?} was
-called. Clicking with the right mouse button on an active field will
-search the IDL online help for this item.@refill
+@cindex Categories, of routines
+@cindex Load-path shadows
+@cindex Shadows, load-path
+@cindex IDL variable @code{!PATH}
+@cindex @code{!PATH}, IDL variable
+@cindex IDL variable @code{!DIR}
+@cindex @code{!DIR}, IDL variable
+
+If a definition of this routine exists in several files accessible to
+IDLWAVE, several @samp{Source} lines will point to the different
+files. This may indicate that your routine is shadowing a system
+library routine, which may or may not be what you want
+(@pxref{Load-Path Shadows}). The information about the calling
+sequence and keywords is derived from the first source listed.
+Library routines are available only if you have scanned your local IDL
+directories or are using pre-scanned libraries (@pxref{Catalogs}).
+The source entry consists of a @emph{source category}, a set of
+@emph{flags} and the path to the @emph{source file}. The following
+default categories exist:
-@cindex Routine source file
-@cindex Module source file
-Another way to find the source file of a routine is the command @kbd{C-c
-C-v} (@code{idlwave-find-module}). It asks for a module name, offering
-the same default as @code{idlwave-routine-info} would have used. In the
-minibuffer, specify a complete routine name (including the class part).
-IDLWAVE will display the source file in another window.@refill
+@multitable @columnfractions .15 .85
+@item @i{System}
+@tab A system routine of unknown origin. When the system library has
+been scanned as part of a catalog (@pxref{Catalogs}), this category
+will automatically split into the next two.
+@item @i{Builtin}
+@tab A builtin system routine with no source code available.
+@item @i{SystemLib}
+@tab A library system routine in the official lib directory @file{!DIR/lib}.
+@item @i{Obsolete}
+@tab A library routine in the official lib directory @file{!DIR/lib/obsolete}.
+@item @i{Library}
+@tab A routine in a file on IDL's search path @code{!PATH}.
+@item @i{Other}
+@tab Any other routine with a file not known to be on the search path.
+@item @i{Unresolved}
+@tab An otherwise unkown routine the shell lists as unresolved
+(referenced, but not compiled).
+@end multitable
-@cindex @code{RESOLVE_ROUTINE}
-@cindex Compiling library modules
-@cindex Routines, resolving
-@cindex Online help, for IDL routines
-The two other commands that work with the routine at point need a
-running IDLWAVE shell. The key sequence @kbd{M-?} calls the command
-@code{idlwave-routine-info-from-idlhelp}. This sends the command line
-@samp{ONLINE_HELP, '@var{routine_name}'} to IDL in order to display the
-documentation of the routine in the IDL online documentation. The key
-sequence @kbd{C-c =} calls the command @code{idlwave-resolve} and sends
-the line @samp{RESOLVE_ROUTINE, '@var{routine_name}'} to IDL in order to
-resolve (compile) it.
+Any routines discovered in library catalogs (@pxref{Library
+Catalogs}), will display the category assigned during creation,
+e.g. @samp{NasaLib}. For routines not discovered in this way, you can
+create additional categories based on the routine's filename using the
+variable @code{idlwave-special-lib-alist}.
+
+@cindex Flags, in routine info
+@cindex Duplicate routines
+@cindex Multiply defined routines
+@cindex Routine definitions, multiple
+The flags @code{[LCSB]} indicate the source of the information IDLWAVE
+has regarding the file: from a library catalog (@w{@code{[L---]}}),
+from a user catalog (@w{@code{[-C--]}}, from the IDL Shell
+(@w{@code{[--S-]}}) or from an Emacs buffer (@w{@code{[---B]}}).
+Combinations are possible (a compiled library routine visited in a
+buffer might read @w{@code{[L-SB]}}). If a file contains multiple
+definitions of the same routine, the file name will be prefixed with
+@samp{(Nx)} where @samp{N} is the number of definitions.
+
+@cindex Online Help from the routine info buffer
+@cindex Active text, in routine info
+@cindex Inserting keywords, from routine info
+@cindex Source file, access from routine info
+Some of the text in the @file{*Help*} routine info buffer will be active
+(it is highlighted when the mouse moves over it). Typically, clicking
+with the right mouse button invokes online help lookup, and clicking
+with the middle mouse button inserts keywords or visits files:
+
+@multitable @columnfractions 0.15 0.85
+@item @i{Usage}
+@tab If online help is installed, a click with the @emph{right} mouse
+button on the @i{Usage:} line will access the help for the
+routine (@pxref{Online Help}).
+@item @i{Keyword}
+@tab Online help about keywords is also available with the
+@emph{right} mouse button. Clicking on a keyword with the @emph{middle}
+mouse button will insert this keyword in the buffer from where
+@code{idlwave-routine-info} was called. Holding down @key{SHIFT} while
+clicking also adds the initial @samp{/}.
+@item @i{Source}
+@tab Clicking with the @emph{middle} mouse button on a @samp{Source} line
+finds the source file of the routine and visits it in another window.
+Another click on the same line switches back to the buffer from which
+@kbd{C-c ?} was called. If you use the @emph{right} mouse button, the
+source will not be visited by a buffer, but displayed in the online help
+window.
+@item @i{Classes}
+@tab The @i{Classes} line is only included in the routine info window if
+the current class inherits from other classes. You can click with the
+@emph{middle} mouse button to display routine info about the current
+method in other classes on the inheritance chain, if such a method
+exists there.
+@end multitable
-@code{idlwave-resolve} is one way to get a library module within reach
-of IDLWAVE's routine info collecting functions. A better way is to
-prescan (parts of) the library (@pxref{Library Scan}). Routine info on
-library modules will then be available without the need to compile the
-modules first, and even without a running shell.
+@defopt idlwave-resize-routine-help-window (@code{t})
+Non-@code{nil} means resize the Routine-info @file{*Help*} window to
+fit the content.
+@end defopt
-@xref{Sources of Routine Info}, for in-depth information where IDLWAVE
-collects data about routines, and how to update this information.
+@defopt idlwave-special-lib-alist
+Alist of regular expressions matching special library directories.
+@end defopt
-@defopt idlwave-scan-all-buffers-for-routine-info (@code{t})
-Non-@code{nil} means, scan all buffers for IDL programs when updating
-info. When this variable is @code{nil}, it only parses the current
-buffer.@refill
+@defopt idlwave-rinfo-max-source-lines (@code{5})
+Maximum number of source files displayed in the Routine Info window.
@end defopt
-@defopt idlwave-query-shell-for-routine-info (@code{t})
-Non-@code{nil} means query the shell for info about compiled routines.
+
+@ifhtml
+
+@end ifhtml
+@node Online Help, Completion, Routine Info, The IDLWAVE Major Mode
+@section Online Help
+
+@cindex Online Help
+@cindex @file{idlw-help.txt}
+@cindex @file{idlw-help.el}
+@cindex Installing online help
+@cindex Online Help, Installation
+@cindex Speed, of online help
+
+For IDL system routines, RSI provides extensive documentation.
+IDLWAVE can access an HTML version of this documentation very quickly
+and accurately. This is @emph{much} faster than using the IDL online
+help application, because IDLWAVE usually gets you to the right place
+in the documentation directly --- e.g. a specific keyword of a routine
+--- without any additional browsing and scrolling. For this online
+help to work, an HTML version of the IDL documentation, which is not
+part of the standalone IDLWAVE distribution, is required. The
+necessary files can be downloaded from @uref{@value{IDLWAVE-HOMEPAGE},
+the maintainers webpage}. There are a variety of options for
+displaying the HTML help: see below. Help for routines without HTML
+documentation is also available, using the routine documentation
+header and/or source.
+
+@kindex M-?
+In any IDL program (or, as with most IDLWAVE commands, in the IDL
+Shell), press @kbd{M-?} (@code{idlwave-context-help}), or click with
+@kbd{S-Mouse-3} to access context sensitive online help. The following
+locations are recognized context for help:
+
+@cindex Context, for online help
+@multitable @columnfractions .25 .75
+@item @i{Routine name}
+@tab The name of a routine (function, procedure, method).
+@item @i{Keyword Parameter}
+@tab A keyword parameter of a routine.
+@item @i{System Variable}
+@tab System variables like @code{!DPI}.
+@item @i{System Variable Tags}
+@tab System variables tags like @code{!D.X_SIZE}.
+@item @i{IDL Statement}
+@tab Statements like @code{PRO}, @code{REPEAT}, @code{COMPILE_OPT}, etc.
+@item @i{Class name}
+@tab A class name in an @code{OBJ_NEW} call.
+@item @i{Class Init}
+@tab Beyond the class name in an @code{OBJ_NEW} call.
+@item @i{Executive Command}
+@tab An executive command like @code{.RUN}. Mostly useful in the shell.
+@item @i{Structure Tags}
+@tab Structure tags like @code{state.xsize}
+@item @i{Class Tags}
+@tab Class tags like @code{self.value}.
+@item @i{Default}
+@tab The routine that would be selected for routine info display.
+@end multitable
+
+@cindex @code{OBJ_NEW}, special online help
+Note that the @code{OBJ_NEW} function is special in that the help
+displayed depends on the cursor position. If the cursor is on the
+@samp{OBJ_NEW}, this function is described. If it is on the class
+name inside the quotes, the documentation for the class is pulled up.
+If the cursor is @emph{after} the class name, anywhere in the argument
+list, the documentation for the corresponding @code{Init} method and
+its keywords is targeted.
+
+Apart from an IDLWAVE buffer or shell, there are two more places from
+which online help can be accessed.
+
+@itemize @bullet
+@item
+Online help for routines and keywords can be accessed through the
+Routine Info display. Click with @kbd{Mouse-3} on an item to see the
+corresponding help (@pxref{Routine Info}).
+@item
+When using completion and Emacs pops up a @file{*Completions*} buffer
+with possible completions, clicking with @kbd{Mouse-3} on a completion
+item invokes help on that item (@pxref{Completion}). Items for which
+help is available in the online system documentation (vs. just the
+program source itself) will be emphasized (e.g. colored blue).
+@end itemize
+@noindent
+In both cases, a blue face indicates that the item is documented in
+the IDL manual, but an attempt will be made to visit non-blue items
+directly in the originating source file.
+
+
+@menu
+* Help with HTML Documentation::
+* Help with Source::
+@end menu
+
+@node Help with HTML Documentation, Help with Source, Online Help, Online Help
+@subsection Help with HTML Documentation
+@cindex HTML Help
+@cindex Help using HTML manuals
+@cindex IDL manual, HTML version
+
+Help using the HTML documentation is invoked with the built-in Emacs
+command @code{browse-url}, which displays the relevant help topic in a
+browser of your choosing. There are many possible browsers to choose
+among, with differing advantages and disadvantages. The variable
+@code{idlwave-help-browser-function} controls which browser help is
+sent to. This function is used to set the variable
+@code{browse-url-browser-function} locally for IDLWAVE help only.
+Customize this variable to see what choices of browsers your system
+offers.
+
+Certain browsers like @code{w3} (bundled with many versions of Emacs)
+and @code{w3m} (@uref{http://emacs-w3m.namazu.org/}, the author's help
+browser of choice) are run within Emacs, and use Emacs buffers to
+display the HTML help. This can be convenient, especially on small
+displays, and images can even be displayed in-line on new Emacs
+versions. However, better formatting results are often achieved with
+external browsers, like Mozilla. IDLWAVE assumes any browser function
+containing "w3" is displayed in a local buffer. If you are using
+another Emacs-local browser for which this is not true, set the
+variable @code{idlwave-help-browser-is-local}.
+
+@emph{N.B. For Windows users}: IDLWAVE can bring up RSI help directly
+in the Microsoft HTMLHelp documentation supplied with IDL: no
+additional help files are needed. Be sure to set
+@code{idlwave-system-directory} and the help file will be found
+automatically (or, alternatively, specify its location directly with
+@code{idlwave-html-help-location}). The variable
+@code{idlwave-help-use-hh} controls whether HTMLHelp is used, and
+which application is called to invoke it (@code{HH} is the default).
+The free helper application @code{KEYHH}
+(@uref{http://www.keyworks.net/keyhh.htm}) can be used instead, and is
+preferrable, as it permits loading new help topics into the same help
+window. @code{KEYHH} must be downloaded and installed separately.
+
+@xref{HTML Help Browser Tips}, for more information on selecting and
+configuring a browser for use with IDL's HTML help system.
+
+@defopt idlwave-html-help-location @file{/usr/local/etc}
+The directory where the @file{idl_html_help} dir or @file{idl.chm}
+HTMLHelp files live.
@end defopt
-@defopt idlwave-resize-routine-help-window (@code{t})
-Non-@code{nil} means, resize the Routine-info @file{*Help*} window to
-fit the content.@refill
+@defopt idlwave-help-use-hh @code{nil}
+If set to @code{'hh} or @code{'keyhh}, use Windows native HTMLHelp
+with the specified help application.
+@end defopt
+
+@defopt idlwave-help-browser-function
+The browser function to use to display IDLWAVE HTML help. Should be
+one of the functions available for setting
+@code{browse-url-browser-function}, which see.
+@end defopt
+
+@defopt idlwave-help-browser-is-local
+Is the browser selected in @code{idlwave-help-browser-function} run in a
+local Emacs buffer? Defaults to @code{t} if the function contains
+"-w3".
+@end defopt
+
+@defopt idlwave-help-link-face
+The face for links to IDLWAVE online help.
+@end defopt
+
+@node Help with Source, , Help with HTML Documentation, Online Help
+@subsection Help with Source
+@cindex Help using routine source
+
+@cindex Source code, as online help
+@cindex DocLib header, as online help
+For routines which are not documented in an HTML manual (for example
+personal or library routines), the source code itself is used as help
+text. If the requested information can be found in a (more or less)
+standard DocLib file header, IDLWAVE shows the header (scrolling down to
+a keyword, if appropriate). Otherwise the routine definition statement
+(@code{pro}/@code{function}) is shown. The doclib header sections which
+are searched for include @samp{NAME} and @samp{KEYWORDS}. Localization
+support can be added by customizing the @code{idlwave-help-doclib-name}
+and @code{idlwave-help-doclib-keyword} variables.
+
+@cindex Structure tags, in online help
+@cindex Class tags, in online help
+Help is also available for class structure tags (@code{self.TAG}), and
+generic structure tags, if structure tag completion is enabled
+(@pxref{Structure Tag Completion}). This is implemented by visiting the
+tag within the class or structure definition source itself. Help is not
+available on built-in system class tags.
+
+The help window is normally displayed in the same frame, but can be
+popped-up in a separate frame. The following commands can be used to
+navigate inside the help system for source files:
+
+@multitable @columnfractions .15 .85
+@item @kbd{@key{SPACE}}
+@tab Scroll forward one page.
+@item @kbd{@key{RET}}
+@tab Scroll forward one line.
+@item @kbd{@key{DEL}}
+@tab Scroll back one page.
+@item @kbd{h}
+@tab Jump to DocLib Header of the routine whose source is displayed
+as help.
+@item @kbd{H}
+@tab Jump to the first DocLib Header in the file.
+@item @kbd{.} @r{(Dot)}
+@tab Jump back and forth between the routine definition (the
+@code{pro}/@code{function} statement) and the description of the help
+item in the DocLib header.
+@item @kbd{F}
+@tab Fontify the buffer like source code. See the variable @code{idlwave-help-fontify-source-code}.
+@item @kbd{q}
+@tab Kill the help window.
+@end multitable
+
+
+@defopt idlwave-help-use-dedicated-frame (@code{nil})
+Non-@code{nil} means use a separate frame for Online Help if possible.
+@end defopt
+
+@defopt idlwave-help-frame-parameters
+The frame parameters for the special Online Help frame.
+@end defopt
+
+@defopt idlwave-max-popup-menu-items (@code{20})
+Maximum number of items per pane in pop-up menus.
+@end defopt
+
+@defopt idlwave-extra-help-function
+Function to call for help if the normal help fails.
+@end defopt
+
+@defopt idlwave-help-fontify-source-code (@code{nil})
+Non-@code{nil} means fontify source code displayed as help.
+@end defopt
+
+@defopt idlwave-help-source-try-header (@code{t})
+Non-@code{nil} means try to find help in routine header when
+displaying source file.
+@end defopt
+
+@defopt idlwave-help-doclib-name (@code{"name"})
+The case-insensitive heading word in doclib headers to locate the
+@emph{name} section. Can be a regexp, e.g. @code{"\\(name\\|nom\\)"}.
+@end defopt
+
+@defopt idlwave-help-doclib-keyword (@code{"KEYWORD"})
+The case-insensitive heading word in doclib headers to locate the
+@emph{keywords} section. Can be a regexp.
@end defopt
-@node Completion, Code Templates, Routine Info, The IDLWAVE Major Mode
+@node Completion, Routine Source, Online Help, The IDLWAVE Major Mode
@section Completion
@cindex Completion
-
-IDLWAVE offers completion for routine names and keywords. As in many
-programming modes, completion is bound to @kbd{M-@key{TAB}}.
-Completion uses the same internal information as routine info,
-so in order to update IDLWAVE's idea about your own routines after you
-have edited or compiled them, press @kbd{C-c C-i}
-(@code{idlwave-update-routine-info}).@refill
+@cindex Keyword completion
+@cindex Method completion
+@cindex Object method completion
+@cindex Class name completion
+@cindex Function name completion
+@cindex Procedure name completion
+
+@kindex M-@key{TAB}
+@kindex C-c C-i
+IDLWAVE offers completion for class names, routine names, keywords,
+system variables, system variable tags, class structure tags, regular
+structure tags and file names. As in many programming modes,
+completion is bound to @kbd{M-@key{TAB}} (or @kbd{@key{TAB}} in the
+IDLWAVE Shell --- @pxref{Using the Shell}). Completion uses exactly
+the same internal information as routine info, so when necessary
+(rarely) it can be updated with @kbd{C-c C-i}
+(@code{idlwave-update-routine-info}).
The completion function is context sensitive and figures out what to
-complete at point. Here are example lines and what @kbd{M-@key{TAB}}
-would try to complete when the cursor is on the position marked with a
-@samp{*}.
+complete based location of the point. Here are example lines and what
+@kbd{M-@key{TAB}} would try to complete when the cursor is on the
+position marked with a @samp{_}:
@example
-plo* @r{Procedure}
-x = a* @r{Function}
-plot,xra* @r{Keyword of @code{plot} procedure}
-plot,x,y,/x* @r{Keyword of @code{plot} procedure}
-plot,min(* @r{Keyword of @code{min} function}
-obj -> a* @r{Object method (procedure)}
-a(2,3) = obj -> a* @r{Object method (function)}
-x = obj_new('IDL* @r{Class name}
-x = obj_new('MyCl',a* @r{Keyword to @code{Init} method in class @code{MyCl}}
+plo_ @r{Procedure}
+x = a_ @r{Function}
+plot,xra_ @r{Keyword of @code{plot} procedure}
+plot,x,y,/x_ @r{Keyword of @code{plot} procedure}
+plot,min(_ @r{Keyword of @code{min} function}
+obj -> a_ @r{Object method (procedure)}
+a(2,3) = obj -> a_ @r{Object method (function)}
+x = obj_new('IDL_ @r{Class name}
+x = obj_new('MyCl',a_ @r{Keyword to @code{Init} method in class @code{MyCl}}
+pro A_ @r{Class name}
+pro _ @r{Fill in @code{Class::} of first method in this file}
+!v_ @r{System variable}
+!version.t_ @r{Structure tag of system variable}
+self.g_ @r{Class structure tag in methods}
+state.w_ @r{Structure tag, if tag completion enabled}
+name = 'a_ @r{File name (default inside quotes)}
@end example
+@cindex Completion, ambiguity
+@cindex Completion, forcing function name
+The only place where completion is ambiguous is procedure/function
+@emph{keywords} versus @emph{functions}. After @samp{plot,x,_}, IDLWAVE
+will always assume a keyword to @samp{plot}. However, a function is
+also a possible completion here. You can force completion of a function
+name at such a location by using a prefix arg: @kbd{C-u M-@key{TAB}}.
+
+Giving two prefix arguments (@kbd{C-u C-u M-@key{TAB}}) prompts for a
+regular expression to search among the commands to be completed. As
+an example, completing a blank line in this way will allow you to
+search for a procedure matching a regexp.
+
@cindex Scrolling the @file{*Completions*} window
@cindex Completion, scrolling
+@cindex Completion, Online Help
+@cindex Online Help in @file{*Completions*} buffer
If the list of completions is too long to fit in the
@file{*Completions*} window, the window can be scrolled by pressing
-@kbd{M-@key{TAB}} repeatedly.@refill
+@kbd{M-@key{TAB}} repeatedly. Online help (if installed) for each
+possible completion is available by clicking with @kbd{Mouse-3} on the
+item. Items for which system online help (from the IDL manual) is
+available will be emphasized (e.g. colored blue). For other items, the
+corresponding source code or DocLib header will be used as the help
+text.
+
+@cindex Completion, cancelling
+@cindex Cancelling completion
+Completion is not a blocking operation --- you are free to continue
+editing, enter commands, or simply ignore the @file{*Completions*}
+buffer during a completion operation. If, however, the most recent
+command was a completion, @kbd{C-g} will remove the buffer and restore
+the window configuration. You can also remove the buffer at any time
+with no negative consequences.
-@cindex Case of completed words
-The case of the completed words is determined by what is already in the
-buffer. When the partial word being completed is all lower case, the
-completion will be lower case as well. If at least one character is
-upper case, the string will be completed in upper case or mixed case.
-The default is to use upper case for procedures, functions and keywords,
-and mixed case for object class names and methods, similar to the
-conventions in the IDL manuals. These defaults can be changed with the
-variable @code{idlwave-completion-case}.@refill
+@defopt idlwave-keyword-completion-adds-equal (@code{t})
+Non-@code{nil} means completion automatically adds @samp{=} after
+completed keywords.
+@end defopt
-@defopt idlwave-completion-case
-Association list setting the case (UPPER/lower/Capitalized/...) of completed
-words.@refill
+@defopt idlwave-function-completion-adds-paren (@code{t})
+Non-@code{nil} means completion automatically adds @samp{(} after
+completed function. A value of `2' means also add the closing
+parenthesis and position the cursor between the two.
@end defopt
-@defopt idlwave-completion-force-default-case (@code{nil})
-Non-@code{nil} means, completion will always honor the settings in
-@code{idlwave-completion-case}. When nil (the default), lower case
-strings will be completed to lower case.
+@defopt idlwave-completion-restore-window-configuration (@code{t})
+Non-@code{nil} means restore window configuration after successful
+completion.
@end defopt
-@defopt idlwave-complete-empty-string-as-lower-case (@code{nil})
-Non-@code{nil} means, the empty string is considered lower case for
-completion.@refill
+@defopt idlwave-highlight-help-links-in-completion (@code{t})
+Non-@code{nil} means highlight completions for which system help is
+available.
@end defopt
-@defopt idlwave-keyword-completion-adds-equal (@code{t})
-Non-@code{nil} means, completion automatically adds @samp{=} after
-completed keywords.@refill
+@menu
+* Case of Completed Words:: CaseOFcomPletedWords
+* Object Method Completion and Class Ambiguity:: obj->Method, what?
+* Object Method Completion in the Shell::
+* Class and Keyword Inheritance:: obj->Method, _EXTRA=e
+* Structure Tag Completion:: Completing state.Tag
+@end menu
+
+@node Case of Completed Words, Object Method Completion and Class Ambiguity, Completion, Completion
+@subsection Case of Completed Words
+@cindex Case of completed words
+@cindex Mixed case completion
+IDL is a case-insensitive language, so casing is a matter of style
+only. IDLWAVE helps maintain a consistent casing style for completed
+items. The case of the completed words is determined by what is
+already in the buffer. As an exception, when the partial word being
+completed is all lower case, the completion will be lower case as
+well. If at least one character is upper case, the string will be
+completed in upper case or mixed case, depending on the value of the
+variable @code{idlwave-completion-case}. The default is to use upper
+case for procedures, functions and keywords, and mixed case for object
+class names and methods, similar to the conventions in the IDL
+manuals. For instance, to enable mixed-case completion for routines
+in addition to classes and methods, you need an entry such as
+@code{(routine . preserve)} in that variable. To enable total control
+over the case of completed items, independent of buffer context, set
+@code{idlwave-completion-force-default-case} to non-@code{nil}.
+
+@defopt idlwave-completion-case
+Association list setting the case (UPPER/lower/Capitalized/MixedCase...)
+of completed words.
@end defopt
-@defopt idlwave-function-completion-adds-paren (@code{t})
-Non-@code{nil} means, completion automatically adds @samp{(} after
-completed function. A value of `2' means, also add the closing
-parenthesis and position cursor between the two.@refill
+@defopt idlwave-completion-force-default-case (@code{nil})
+Non-@code{nil} means completion will always honor the settings in
+@code{idlwave-completion-case}. When nil (the default), entirely lower
+case strings will always be completed to lower case, no matter what the
+settings in @code{idlwave-completion-case}.
@end defopt
-@defopt idlwave-completion-restore-window-configuration (@code{t})
-Non-@code{nil} means, restore window configuration after successful
-completion.@refill
+@defopt idlwave-complete-empty-string-as-lower-case (@code{nil})
+Non-@code{nil} means the empty string is considered lower case for
+completion.
@end defopt
-@subsubheading Object Method Completion and Class Ambiguity
+@node Object Method Completion and Class Ambiguity, Object Method Completion in the Shell, Case of Completed Words, Completion
+@subsection Object Method Completion and Class Ambiguity
@cindex Object methods
@cindex Class ambiguity
+@cindex @code{self} object, default class
An object method is not uniquely determined without the object's class.
-Since the class part is usually omitted in the source code, IDLWAVE
-considers all available methods in all classes as possible completions
-of an object method name. For keywords, the combined keywords of the
-current method in all available classes will be considered. In the
-@file{*Completions*} buffer, the classes allowed for each completion
-will be shown next to the item (see option
-@code{idlwave-completion-show-classes}).@refill
-
+Since the class is almost always omitted in the calling source, IDLWAVE
+considers all available methods in all classes as possible method name
+completions. The combined list of keywords of the current method in
+@emph{all} known classes which contain that method will be considered
+for keyword completion. In the @file{*Completions*} buffer, the
+matching classes will be shown next to each item (see option
+@code{idlwave-completion-show-classes}). As a special case, the class
+of an object called @samp{self} is always taken to be the class of the
+current routine. All classes it inherits from are considered as well
+where appropriate.
+
+@cindex Forcing class query.
+@cindex Class query, forcing
You can also call @code{idlwave-complete} with a prefix arg: @kbd{C-u
M-@key{TAB}}. IDLWAVE will then prompt you for the class in order to
narrow down the number of possible completions. The variable
-@code{idlwave-query-class} can be configured to make this behavior the
-default (not really recommended). After you have specified the class
-for a particular statement (e.g. when completing the method), IDLWAVE
-can remember it for the rest of the editing session. Subsequent
-completions in the same statement (e.g. keywords) can then reuse this
-class information. Remembering the class works by placing a text
-property in the object operator @samp{->}. This is not enabled by
-default - the variable @code{idlwave-store-inquired-class} can be used
-to turn it on.@refill
-
-@defopt idlwave-completion-show-classes (@code{t})
-Non-@code{nil} means, show classes in @file{*Completions*} buffer when
-completing object methods and keywords.@refill
+@code{idlwave-query-class} can be configured to make such prompting the
+default for all methods (not recommended), or selectively for very
+common methods for which the number of completing keywords would be too
+large (e.g. @code{Init}).
+
+@cindex Saving object class on @code{->}
+@cindex @code{->}
+After you have specified the class for a particular statement (e.g. when
+completing the method), IDLWAVE can remember it for the rest of the
+editing session. Subsequent completions in the same statement
+(e.g. keywords) can then reuse this class information. This works by
+placing a text property on the method invocation operator @samp{->},
+after which the operator will be shown in a different face. This is not
+enabled by default --- the variable @code{idlwave-store-inquired-class}
+can be used to turn it on.
+
+@defopt idlwave-completion-show-classes (@code{1})
+Non-@code{nil} means show up to that many classes in
+@file{*Completions*} buffer when completing object methods and
+keywords.
@end defopt
@defopt idlwave-completion-fontify-classes (@code{t})
-Non-@code{nil} means, fontify the classes in completions buffer.
+Non-@code{nil} means fontify the classes in completions buffer.
@end defopt
@defopt idlwave-query-class (@code{nil})
-Association list governing query for object classes during completion.@refill
+Association list governing query for object classes during completion.
@end defopt
@defopt idlwave-store-inquired-class (@code{nil})
-Non-@code{nil} means, store class of a method call as text property on
-@samp{->}.@refill
+Non-@code{nil} means store class of a method call as text property on
+@samp{->}.
@end defopt
@defopt idlwave-class-arrow-face
Face to highlight object operator arrows @samp{->} which carry a class
-property.@refill
+text property.
@end defopt
-@node Code Templates, Actions, Completion, The IDLWAVE Major Mode
-@section Code Templates
-@cindex Code templates
-@cindex Abbreviations
-@cindex Templates
+@node Object Method Completion in the Shell, Class and Keyword Inheritance, Object Method Completion and Class Ambiguity, Completion
+@subsection Object Method Completion in the Shell
+@cindex Method Completion in Shell
+In the IDLWAVE Shell (@pxref{The IDLWAVE Shell}), objects on which
+methods are being invoked have a special property: they must exist as
+variables, and so their class can be determined (for instance, using the
+@code{obj_class()} function). In the Shell, when attempting completion,
+routine info, or online help within a method routine, a query is sent to
+determine the class of the object. If this query is successful, the
+class found will be used to select appropriate completions, routine
+info, or help. If unsuccessful, information from all known classes will
+be used (as in the buffer). Setting the variable
+@code{idlwave-store-inquired-class} can eliminate unnecessary repetitive
+queries for the object's class, and speed up completion.
+
+@node Class and Keyword Inheritance, Structure Tag Completion, Object Method Completion in the Shell, Completion
+@subsection Class and Keyword Inheritance
+@cindex Inheritance, class
+@cindex Keyword inheritance
+@cindex Inheritance, keyword
+
+Class inheritance affects which methods are called in IDL. An object of
+a class which inherits methods from one or more superclasses can
+override that method by defining its own method of the same name, extend
+the method by calling the method(s) of its superclass(es) in its
+version, or inherit the method directly by making no modifications.
+IDLWAVE examines class definitions during completion and routine
+information display, and records all inheritance information it finds.
+This information is displayed if appropriate with the calling sequence
+for methods (@pxref{Routine Info}), as long as variable
+@code{idlwave-support-inheritance} is non-@code{nil}.
+
+In many class methods, @emph{keyword} inheritance (@code{_EXTRA} and
+@code{_REF_EXTRA}) is used hand-in-hand with class inheritance and
+method overriding. E.g., in a @code{SetProperty} method, this technique
+allows a single call @code{obj->SetProperty} to set properties up the
+entire class inheritance chain. This is often referred to as
+@emph{chaining}, and is characterized by chained method calls like
+@w{@code{self->MySuperClass::SetProperty,_EXTRA=e}}.
+
+IDLWAVE can accomodate this special synergy between class and keyword
+inheritance: if @code{_EXTRA} or @code{_REF_EXTRA} is detected among a
+method's keyword parameters, all keywords of superclass versions of
+the method being considered can be included in completion. There is
+of course no guarantee that this type of keyword chaining actually
+occurrs, but for some methods it's a very convenient assumption. The
+variable @code{idlwave-keyword-class-inheritance} can be used to
+configure which methods have keyword inheritance treated in this
+simple, class-driven way. By default, only @code{Init} and
+@code{(Get|Set)Property} are. The completion buffer will label
+keywords based on their originating class.
+
+@defopt idlwave-support-inheritance (@code{t})
+Non-@code{nil} means consider inheritance during completion, online help etc.
+@end defopt
-IDLWAVE can insert IDL code templates into the buffer. For a few
-templates, this is done with direct keybindings:
+@defopt idlwave-keyword-class-inheritance
+A list of regular expressions to match methods for which simple
+class-driven keyword inheritance will be used for Completion.
+@end defopt
-@multitable @columnfractions .15 .85
-@item @kbd{C-c C-c}
-@tab @code{CASE} statement template
-@item @kbd{C-c C-f}
-@tab @code{FOR} loop template
-@item @kbd{C-c C-r}
-@tab @code{REPEAT} loop template
-@item @kbd{C-c C-w}
-@tab @code{WHILE} loop template
+@node Structure Tag Completion, , Class and Keyword Inheritance, Completion
+@subsection Structure Tag Completion
+@cindex Completion, structure tag
+@cindex Structure tag completion
+
+In many programs, especially those involving widgets, large structures
+(e.g. the @samp{state} structure) are used to communicate among
+routines. It is very convenient to be able to complete structure tags,
+in the same way as for instance variables (tags) of the @samp{self}
+object (@pxref{Object Method Completion and Class Ambiguity}). Add-in
+code for structure tag completion is available in the form of a loadable
+completion module: @file{idlw-complete-structtag.el}. Tag completion in
+structures is highly ambiguous (much more so than @samp{self}
+completion), so @code{idlw-complete-structtag} makes an unusual and very
+specific assumption: the exact same variable name is used to refer to
+the structure in all parts of the program. This is entirely unenforced
+by the IDL language, but is a typical convention. If you consistently
+refer to the same structure with the same variable name
+(e.g. @samp{state}), structure tags which are read from its definition
+in the same file can be used for completion.
+
+Structure tag completion is not enabled by default. To enable it,
+simply add the following to your @file{.emacs}:
+
+@lisp
+ (add-hook 'idlwave-load-hook
+ (lambda () (require 'idlw-complete-structtag)))
+@end lisp
+
+Once enabled, you'll also be able to access online help on the structure
+tags, using the usual methods (@pxref{Online Help}).
+
+@node Routine Source, Resolving Routines, Completion, The IDLWAVE Major Mode
+@section Routine Source
+@cindex Routine source file
+@cindex Module source file
+@cindex Source file, of a routine
+@kindex C-c C-v
+In addition to clicking on a @i{Source:} line in the routine info
+window, there is another way to quickly visit the source file of a
+routine. The command @kbd{C-c C-v} (@code{idlwave-find-module}) asks
+for a module name, offering the same default as
+@code{idlwave-routine-info} would have used, taken from nearby buffer
+contents. In the minibuffer, specify a complete routine name (including
+any class part). IDLWAVE will display the source file in another
+window, positioned at the routine in question. You can also visit a
+routine in the current buffer, with completion, by using a single prefix
+(@kbd{C-u C-c C-v}).
+
+@cindex Buffers, killing
+@cindex Killing autoloaded buffers
+Since getting the source of a routine into a buffer is so easy with
+IDLWAVE, too many buffers visiting different IDL source files are
+sometimes created. The special command @kbd{C-c C-k}
+(@code{idlwave-kill-autoloaded-buffers}) can be used to easily remove
+these buffers.
+
+@node Resolving Routines, Code Templates, Routine Source, The IDLWAVE Major Mode
+@section Resolving Routines
+@cindex @code{RESOLVE_ROUTINE}
+@cindex Compiling library modules
+@cindex Routines, resolving
+
+The key sequence @kbd{C-c =} calls the command @code{idlwave-resolve}
+and sends the line @samp{RESOLVE_ROUTINE, '@var{routine_name}'} to IDL
+in order to resolve (compile) it. The default routine to be resolved is
+taken from context, but you get a chance to edit it.
+
+@code{idlwave-resolve} is one way to get a library module within reach
+of IDLWAVE's routine info collecting functions. A better way is to
+keep routine information available in catalogs (@pxref{Catalogs}).
+Routine info on modules will then be available without the need to
+compile the modules first, and even without a running shell.
+
+@xref{Sources of Routine Info}, for more information on the ways IDLWAVE
+collects data about routines, and how to update this information.
+
+@node Code Templates, Abbreviations, Resolving Routines, The IDLWAVE Major Mode
+@section Code Templates
+@cindex Code templates
+@cindex Templates
+
+IDLWAVE can insert IDL code templates into the buffer. For a few
+templates, this is done with direct key bindings:
+
+@multitable @columnfractions .15 .85
+@item @kbd{C-c C-c}
+@tab @code{CASE} statement template
+@item @kbd{C-c C-f}
+@tab @code{FOR} loop template
+@item @kbd{C-c C-r}
+@tab @code{REPEAT} loop template
+@item @kbd{C-c C-w}
+@tab @code{WHILE} loop template
@end multitable
-Otherwise, special abbreviations are used. Emacs abbreviations are
-expanded by typing text into the buffer and pressing @key{SPC} or
-@key{RET}. The special abbreviations used to insert code templates all
-start with a @samp{\} (the backslash). Here are a few examples of
-predefined abbreviations. For a full list, use @kbd{M-x
+All code templates are also available as abbreviations
+(@pxref{Abbreviations}).
+
+@node Abbreviations, Actions, Code Templates, The IDLWAVE Major Mode
+@section Abbreviations
+@cindex Abbreviations
+
+Special abbreviations exist to enable rapid entry of commonly used
+commands. Emacs abbreviations are expanded by typing text into the
+buffer and pressing @key{SPC} or @key{RET}. The special abbreviations
+used to insert code templates all start with a @samp{\} (the backslash),
+or, optionally, any other character set in
+@code{idlwave-abbrev-start-char}. IDLWAVE ensures that abbreviations are
+only expanded where they should be (i.e., not in a string or comment),
+and permits the point to be moved after an abbreviation expansion ---
+very useful for positioning the mark inside of parentheses, etc.
+
+Special abbreviations are pre-defined for code templates and other
+useful items. To visit the full list of abbreviations, use @kbd{M-x
idlwave-list-abbrevs}.
+Template abbreviations:
+
@multitable @columnfractions .15 .85
@item @code{\pr}
@tab @code{PROCEDURE} template
@@ -806,62 +1921,197 @@ idlwave-list-abbrevs}.
@tab @code{IF} statement template
@item @code{\elif}
@tab @code{IF-ELSE} statement template
+@end multitable
+
+String abbreviations:
+
+@multitable @columnfractions .15 .85
+@item @code{\ap}
+@tab @code{arg_present()}
@item @code{\b}
-@tab @code{BEGIN}
+@tab @code{begin}
+@item @code{\cb}
+@tab @code{byte()}
+@item @code{\cc}
+@tab @code{complex()}
+@item @code{\cd}
+@tab @code{double()}
+@item @code{\cf}
+@tab @code{float()}
+@item @code{\cl}
+@tab @code{long()}
+@item @code{\co}
+@tab @code{common}
+@item @code{\cs}
+@tab @code{string()}
+@item @code{\cx}
+@tab @code{fix()}
+@item @code{\e}
+@tab @code{else}
+@item @code{\ec}
+@tab @code{endcase}
+@item @code{\ee}
+@tab @code{endelse}
+@item @code{\ef}
+@tab @code{endfor}
+@item @code{\ei}
+@tab @code{endif else if}
+@item @code{\el}
+@tab @code{endif else}
+@item @code{\en}
+@tab @code{endif}
+@item @code{\er}
+@tab @code{endrep}
+@item @code{\es}
+@tab @code{endswitch}
+@item @code{\ew}
+@tab @code{endwhile}
+@item @code{\g}
+@tab @code{goto,}
+@item @code{\h}
+@tab @code{help,}
+@item @code{\ik}
+@tab @code{if keyword_set() then}
+@item @code{\iap}
+@tab @code{if arg_present() then}
+@item @code{\ine}
+@tab @code{if n_elements() eq 0 then}
+@item @code{\inn}
+@tab @code{if n_elements() ne 0 then}
+@item @code{\k}
+@tab @code{keyword_set()}
+@item @code{\n}
+@tab @code{n_elements()}
+@item @code{\np}
+@tab @code{n_params()}
+@item @code{\oi}
+@tab @code{on_ioerror,}
+@item @code{\or}
+@tab @code{openr,}
+@item @code{\ou}
+@tab @code{openu,}
+@item @code{\ow}
+@tab @code{openw,}
+@item @code{\p}
+@tab @code{print,}
+@item @code{\pt}
+@tab @code{plot,}
+@item @code{\re}
+@tab @code{read,}
+@item @code{\rf}
+@tab @code{readf,}
+@item @code{\rt}
+@tab @code{return}
+@item @code{\ru}
+@tab @code{readu,}
+@item @code{\s}
+@tab @code{size()}
+@item @code{\sc}
+@tab @code{strcompress()}
+@item @code{\sl}
+@tab @code{strlowcase()}
+@item @code{\sm}
+@tab @code{strmid()}
+@item @code{\sn}
+@tab @code{strlen()}
+@item @code{\sp}
+@tab @code{strpos()}
+@item @code{\sr}
+@tab @code{strtrim()}
+@item @code{\st}
+@tab @code{strput()}
+@item @code{\su}
+@tab @code{strupcase()}
+@item @code{\t}
+@tab @code{then}
+@item @code{\u}
+@tab @code{until}
+@item @code{\wc}
+@tab @code{widget_control,}
+@item @code{\wi}
+@tab @code{widget_info()}
+@item @code{\wu}
+@tab @code{writeu,}
@end multitable
-
-@defopt idlwave-abbrev-start-char
-A single character string used to start abbreviations in abbrev
-mode.@refill
+
+@noindent You can easily add your own abbreviations or override existing
+abbrevs with @code{define-abbrev} in your mode hook, using the
+convenience function @code{idlwave-define-abbrev}:
+
+@lisp
+(add-hook 'idlwave-mode-hook
+ (lambda ()
+ (idlwave-define-abbrev "wb" "widget_base()"
+ (idlwave-keyword-abbrev 1))
+ (idlwave-define-abbrev "ine" "IF N_Elements() EQ 0 THEN"
+ (idlwave-keyword-abbrev 11))))
+@end lisp
+
+Notice how the abbreviation (here @emph{wb}) and its expansion
+(@emph{widget_base()}) are given as arguments, and the single argument to
+@code{idlwave-keyword-abbrev} (here @emph{1}) specifies how far back to
+move the point upon expansion (in this example, to put it between the
+parentheses).
+
+The abbreviations are expanded in upper or lower case, depending upon
+the variables @code{idlwave-abbrev-change-case} and, for reserved word
+templates, @code{idlwave-reserved-word-upcase} (@pxref{Case Changes}).
+
+@defopt idlwave-abbrev-start-char (@code{"\"})
+A single character string used to start abbreviations in abbrev mode.
+Beware of common characters which might naturally occur in sequence with
+abbreviation strings.
@end defopt
@defopt idlwave-abbrev-move (@code{t})
Non-@code{nil} means the abbrev hook can move point, e.g. to end up
-between the parenthesis of a function call.
+between the parentheses of a function call.
@end defopt
-@node Actions, Doc Header, Code Templates, The IDLWAVE Major Mode
+@node Actions, Doc Header, Abbreviations, The IDLWAVE Major Mode
@section Actions
@cindex Actions
@cindex Coding standards, enforcing
-@emph{Actions} are special commands which are executed automatically
-while you write code in order to check the structure of the program or
-to enforce coding standards. Most actions which have been implemented
-in IDLWAVE are turned off by default, assuming that the average user
-wants her code the way she writes it. But if you are a lazy typist and
-want your code to adhere to certain standards, they can be
-helpful.@refill
+@emph{Actions} are special formatting commands which are executed
+automatically while you write code in order to check the structure of
+the program or to enforce coding standards. Most actions which have
+been implemented in IDLWAVE are turned off by default, assuming that the
+average user wants her code the way she writes it. But if you are a
+lazy typist and want your code to adhere to certain standards, actions
+can be helpful.
+
+Actions can be applied in three ways:
-Action can be applied in three ways:
@itemize @bullet
@item
Some actions are applied directly while typing. For example, pressing
@samp{=} can run a check to make sure that this operator is surrounded
by spaces and insert these spaces if necessary. Pressing @key{SPC}
after a reserved word can call a command to change the word to upper
-case.@refill
+case.
@item
When a line is re-indented with @key{TAB}, actions can be applied to the
entire line. To enable this, the variable @code{idlwave-do-actions}
-must be non-@code{nil}.@refill
+must be non-@code{nil}.
@item
@cindex Foreign code, adapting
@cindex Actions, applied to foreign code
-Action can also be applied to a larger piece of code, e.g. in order to
-convert foreign code to your own style. To do this, mark the relevant
-part of the code and execute @kbd{M-x expand-region-abbrevs}. Useful
-marking commands are @kbd{C-x h} (the entire file) or @kbd{M-C-h} (the
-current subprogram). @xref{Code Indentation}, for information how to
-ajust the indentation of the code.@refill
+Actions can also be applied to a larger piece of code, e.g. to convert
+foreign code to your own style. To do this, mark the relevant part of
+the code and execute @kbd{M-x expand-region-abbrevs}. Useful marking
+commands are @kbd{C-x h} (the entire file) or @kbd{C-M-h} (the current
+subprogram). @xref{Code Indentation}, for information how to adjust the
+indentation of the code.
@end itemize
@defopt idlwave-do-actions (@code{nil})
-Non-@code{nil} means performs actions when indenting.
+Non-@code{nil} means performs actions when indenting. Individual action
+settings are described below and set separately.
@end defopt
@menu
-* Block Boundary Check:: Is the END correct
+* Block Boundary Check:: Is the END statement correct?
* Padding Operators:: Enforcing space around `=' etc
* Case Changes:: Enforcing upper case keywords
@end menu
@@ -871,41 +2121,47 @@ Non-@code{nil} means performs actions when indenting.
@cindex Block boundary check
@cindex @code{END} type checking
@cindex @code{END}, automatic insertion
+@cindex @code{END}, expanding
@cindex Block, closing
@cindex Closing a block
Whenever you type an @code{END} statement, IDLWAVE finds the
corresponding start of the block and the cursor blinks back to that
location for a second. If you have typed a specific @code{END}, like
-@code{ENDIF} or @code{ENDCASE}, you get a warning if that kind of END
-does not match the type of block it terminates.@refill
+@code{ENDIF} or @code{ENDCASE}, you get a warning if that terminator
+does not match the type of block it terminates.
Set the variable @code{idlwave-expand-generic-end} in order to have all
-generic @code{END} statements automatically expanded to a specific type.
-You can also type @kbd{C-c ]} to close the current block by inserting
-the appropriate @code{END} statement.@refill
+generic @code{END} statements automatically expanded to the appropriate
+type. You can also type @kbd{C-c ]} to close the current block by
+inserting the appropriate @code{END} statement.
@defopt idlwave-show-block (@code{t})
Non-@code{nil} means point blinks to block beginning for
-@code{idlwave-show-begin}.@refill
+@code{idlwave-show-begin}.
@end defopt
-@defopt idlwave-expand-generic-end (@code{nil})
+@defopt idlwave-expand-generic-end (@code{t})
Non-@code{nil} means expand generic END to ENDIF/ENDELSE/ENDWHILE etc.
@end defopt
+@defopt idlwave-reindent-end (@code{t})
+Non-@code{nil} means re-indent line after END was typed.
+@end defopt
+
@node Padding Operators, Case Changes, Block Boundary Check, Actions
@subsection Padding Operators
@cindex Padding operators with spaces
@cindex Operators, padding with spaces
+@cindex Space, around operators
Some operators can be automatically surrounded by spaces. This can
-happen when the operator is typed, or also later when the line is
-indented. IDLWAVE contains this setting for the operators @samp{&},
-@samp{<}, @samp{>}, @samp{,}, @samp{=}, but the feature is turned off by
-default. If you want to turn it on, customize the variable
-@code{idlwave-surround-by-blank}. You can also define similar actions
-for other operators by using the function
+happen when the operator is typed, or later when the line is indented.
+IDLWAVE can pad the operators @samp{&}, @samp{<}, @samp{>}, @samp{,},
+@samp{=}, and @samp{->}, but this feature is turned off by default. If
+you want to turn it on, customize the variables
+@code{idlwave-surround-by-blank} and @code{idlwave-do-actions}. You can
+also define similar actions for other operators by using the function
@code{idlwave-action-and-binding} in the mode hook. For example, to
enforce space padding of the @samp{+} and @samp{*} operators, try this
in @file{.emacs}
@@ -919,25 +2175,27 @@ in @file{.emacs}
@end lisp
@defopt idlwave-surround-by-blank (@code{nil})
-Non-@code{nil} means, enable @code{idlwave-surround}. If non-nil,
-@samp{=}, @samp{<}, @samp{>}, @samp{&}, @samp{,} are surrounded with
-spaces by @code{idlwave-surround}.
+Non-@code{nil} means enable @code{idlwave-surround}. If non-@code{nil},
+@samp{=}, @samp{<}, @samp{>}, @samp{&}, @samp{,}, @samp{->} are
+surrounded with spaces by @code{idlwave-surround}.
@end defopt
@defopt idlwave-pad-keyword (@code{t})
-Non-@code{nil} means pad @samp{=} for keywords like assignments.@refill
+Non-@code{nil} means pad @samp{=} for keywords like assignments.
@end defopt
@node Case Changes, , Padding Operators, Actions
@subsection Case Changes
@cindex Case changes
+@cindex Upcase, enforcing for reserved words
+@cindex Downcase, enforcing for reserved words
Actions can be used to change the case of reserved words or expanded
abbreviations by customizing the variables
@code{idlwave-abbrev-change-case} and
@code{idlwave-reserved-word-upcase}. If you want to change the case of
additional words automatically, put something like the following into
-your @file{.emacs} file:@refill
+your @file{.emacs} file:
@lisp
(add-hook 'idlwave-mode-hook
@@ -953,7 +2211,9 @@ your @file{.emacs} file:@refill
@end lisp
For more information, see the documentation string for the function
-@code{idlwave-action-and-binding}.
+@code{idlwave-action-and-binding}. For information on controlling the
+case of routines, keywords, classes, and methods as they are completed, see
+@ref{Completion}.
@defopt idlwave-abbrev-change-case (@code{nil})
Non-@code{nil} means all abbrevs will be forced to either upper or lower
@@ -961,7 +2221,7 @@ case. Legal values are @code{nil}, @code{t}, and @code{down}.
@end defopt
@defopt idlwave-reserved-word-upcase (@code{nil})
-Non-@code{nil} means, reserved words will be made upper case via abbrev
+Non-@code{nil} means reserved words will be made upper case via abbrev
expansion.
@end defopt
@@ -969,22 +2229,31 @@ expansion.
@node Doc Header, Motion Commands, Actions, The IDLWAVE Major Mode
@section Documentation Header
@cindex Documentation header
+@cindex DocLib header
@cindex Modification timestamp
@cindex Header, for file documentation
@cindex Timestamp, in doc header.
@cindex Changelog, in doc header.
+@kindex C-c C-h
+@kindex C-c C-m
The command @kbd{C-c C-h} inserts a standard routine header into the
-buffer, with the usual fields for documentation. One of the keywords is
+buffer, with the usual fields for documentation (a different header can
+be specified with @code{idlwave-file-header}). One of the keywords is
@samp{MODIFICATION HISTORY} under which the changes to a routine can be
recorded. The command @kbd{C-c C-m} jumps to the @samp{MODIFICATION
-HISTORY} of the current routine or file and inserts the user
-name with a timestamp.
+HISTORY} of the current routine or file and inserts the user name with a
+timestamp.
@defopt idlwave-file-header
The doc-header template or a path to a file containing it.
@end defopt
+@defopt idlwave-header-to-beginning-of-file (@code{nil})
+Non-@code{nil} means the documentation header will always be at start
+of file.
+@end defopt
+
@defopt idlwave-timestamp-hook
The hook function used to update the timestamp of a function.
@end defopt
@@ -1006,9 +2275,28 @@ Regexp matching the start of a document library header.
@cindex Motion commands
@cindex Program structure, moving through
@cindex Code structure, moving through
+@cindex @file{Func-menu}, XEmacs package
+@cindex @file{Imenu}, Emacs package
+@cindex Function definitions, jumping to
+@cindex Procedure definitions, jumping to
-Several commands allow to move quickly through the structure of an IDL
-program. These are
+IDLWAVE supports both @file{Imenu} and @file{Func-menu}, two packages
+which make it easy to jump to the definitions of functions and
+procedures in the current file with a pop-up selection. To bind
+@file{Imenu} to a mouse-press, use in your @file{.emacs}:
+
+@lisp
+(define-key global-map [S-down-mouse-3] 'imenu)
+@end lisp
+
+@cindex @file{Speedbar}, Emacs package
+
+In addition, @file{Speedbar} support allows convenient navigation of a
+source tree of IDL routine files, quickly stepping to routine
+definitions. See @code{Tools->Display Speedbar}.
+
+Several commands allow you to move quickly through the structure of an
+IDL program:
@multitable @columnfractions .15 .85
@item @kbd{C-M-a}
@@ -1019,13 +2307,13 @@ program. These are
@tab Beginning of block (stay inside the block)
@item @kbd{C-c @}}
@tab End of block (stay inside the block)
-@item @kbd{M-C-n}
+@item @kbd{C-M-n}
@tab Forward block (on same level)
-@item @kbd{M-C-p}
+@item @kbd{C-M-p}
@tab Backward block (on same level)
-@item @kbd{M-C-d}
+@item @kbd{C-M-d}
@tab Down block (enters a block)
-@item @kbd{M-C-u}
+@item @kbd{C-M-u}
@tab Backward up block (leaves a block)
@item @kbd{C-c C-n}
@tab Next Statement
@@ -1034,6 +2322,7 @@ program. These are
@node Misc Options, , Motion Commands, The IDLWAVE Major Mode
@section Miscellaneous Options
+@cindex Hooks
@defopt idlwave-help-application
The external application providing reference help for programming.
@@ -1054,38 +2343,35 @@ Normal hook. Executed when @file{idlwave.el} is loaded.
-
-
-
-
-
-
-
-
-
-
-
-
-
@node The IDLWAVE Shell, Installation, The IDLWAVE Major Mode, Top
@chapter The IDLWAVE Shell
@cindex IDLWAVE shell
@cindex Major mode, @code{idlwave-shell-mode}
-
-The IDLWAVE shell is an Emacs major mode which allows to run the IDL
-program as an inferior process of Emacs. It can be used to work with
-IDL interactively, to compile and run IDL programs in Emacs buffers and
-to debug these programs. The IDLWAVE shell uses @file{comint}, an Emacs
-packages which handles the communication with the IDL program.
-Unfortunately IDL for Windows and MacOS does not allow the interaction
-with Emacs@footnote{Please inform the maintainer if you come up with a way
-to make the IDLWAVE shell work on these systems.} - so the IDLWAVE shell
-only works under Unix.@refill
+@cindex IDL, as Emacs subprocess
+@cindex Subprocess of Emacs, IDL
+@cindex Comint, Emacs package
+@cindex Windows
+@cindex MacOS
+
+The IDLWAVE shell is an Emacs major mode which permits running the IDL
+program as an inferior process of Emacs, and works closely with the
+IDLWAVE major mode in buffers. It can be used to work with IDL
+interactively, to compile and run IDL programs in Emacs buffers and to
+debug these programs. The IDLWAVE shell is built on @file{comint}, an
+Emacs packages which handles the communication with the IDL program.
+Unfortunately IDL for Windows does not have command-prompt versions
+and thus do not allow the interaction with Emacs@footnote{Please
+inform the maintainer if you come up with a way to make the IDLWAVE
+shell work on these systems.} --- so the IDLWAVE shell currently only
+works under Unix and MacOSX.
@menu
* Starting the Shell:: How to launch IDL as a subprocess
* Using the Shell:: Interactively working with the Shell
-* Debugging IDL Programs:: Compilation/Debugging
+* Commands Sent to the Shell::
+* Debugging IDL Programs::
+* Examining Variables::
+* Custom Expression Examination::
@end menu
@node Starting the Shell, Using the Shell, The IDLWAVE Shell, The IDLWAVE Shell
@@ -1094,26 +2380,48 @@ only works under Unix.@refill
@cindex Shell, starting
@cindex Dedicated frame, for shell buffer
@cindex Frame, for shell buffer
+@cindex Subprocess of Emacs, IDL
+@kindex C-c C-s
The IDLWAVE shell can be started with the command @kbd{M-x
idlwave-shell}. In @code{idlwave-mode} the function is bound to
@kbd{C-c C-s}. It creates a buffer @file{*idl*} which is used to
-interact with the shell. If the shell is already running, @kbd{C-c C-s}
-will simple switch to the shell buffer. The command @kbd{C-c C-l}
-(@code{idlwave-shell-recenter-shell-window}) displays the
-shell window without selecting it.@refill
+interact with the shell. If the shell is already running, @kbd{C-c
+C-s} will simply switch to the shell buffer. The command @kbd{C-c
+C-l} (@code{idlwave-shell-recenter-shell-window}) displays the shell
+window without selecting it. The shell can also be started
+automatically when another command tries to send a command to it. To
+enable auto start, set the variable
+@code{idlwave-shell-automatic-start} to @code{t}.
In order to create a separate frame for the IDLWAVE shell buffer, call
@code{idlwave-shell} with a prefix argument: @kbd{C-u C-c C-s} or
@kbd{C-u C-c C-l}. If you always want a dedicated frame for the shell
window, configure the variable
-@code{idlwave-shell-use-dedicated-frame}.@refill
+@code{idlwave-shell-use-dedicated-frame}.
-The shell can also be started automatically when another command tries
-to send a command to it. To enable auto start, set the variable
-@code{idlwave-shell-automatic-start} to @code{t}.@refill
+To launch a quick IDLWAVE shell directly from a shell prompt without
+an IDLWAVE buffer (e.g., as a replacement for running inside an
+xterm), define a system alias with the following content:
-@defopt idlwave-shell-explicit-file-name
+@example
+emacs -geometry 80x32 -eval "(idlwave-shell 'quick)"
+@end example
+
+Replace the @samp{-geometry 80x32} option with @samp{-nw} if you prefer
+the Emacs process to run directly inside the terminal window.
+
+@cindex ENVI
+@cindex IDL> Prompt
+
+To use IDLWAVE with ENVI or other custom packages which change the
+@samp{IDL> } prompt, you must change the
+@code{idlwave-shell-prompt-pattern}, which defaults to @samp{"^ ?IDL>
+"}. Normally, you can just replace the @samp{IDL} in this expression
+with the prompt you see. A suitable pattern which matches the prompt
+for both ENVI and IDL simultaneously is @samp{"^ ?\\(ENVI\\|IDL\\)> "}.
+
+@defopt idlwave-shell-explicit-file-name (@file{idl})
This is the command to run IDL.
@end defopt
@@ -1129,7 +2437,7 @@ Regexp to match IDL prompt at beginning of a line.
Name to be associated with the IDL process.
@end defopt
-@defopt idlwave-shell-automatic-start
+@defopt idlwave-shell-automatic-start (@code{nil})
Non-@code{nil} means attempt to invoke idlwave-shell if not already
running.
@end defopt
@@ -1138,42 +2446,63 @@ running.
Initial commands, separated by newlines, to send to IDL.
@end defopt
+@defopt idlwave-shell-save-command-history (@code{t})
+Non-@code{nil} means preserve command history between sessions.
+@end defopt
+
+@defopt idlwave-shell-command-history-file (@file{~/.idlwave/.idlwhist})
+The file in which the command history of the idlwave shell is saved.
+Unless it's an absolute path, it goes in
+@code{idlwave-config-directory}.
+@end defopt
+
@defopt idlwave-shell-use-dedicated-frame (@code{nil})
-Non-@code{nil} means, IDLWAVE should use a special frame to display
-shell buffer.
+Non-@code{nil} means IDLWAVE should use a special frame to display the
+shell buffer.
@end defopt
@defopt idlwave-shell-frame-parameters
The frame parameters for a dedicated idlwave-shell frame.
@end defopt
+@defopt idlwave-shell-raise-frame (@code{t})
+Non-@code{nil} means `idlwave-shell' raises the frame showing the shell
+window.
+@end defopt
+
@defopt idlwave-shell-temp-pro-prefix
-The prefix for temporary IDL files used when compiling regions.@refill
+The prefix for temporary IDL files used when compiling regions.
@end defopt
+@cindex Hooks
@defopt idlwave-shell-mode-hook
Hook for customizing @code{idlwave-shell-mode}.
@end defopt
-@node Using the Shell, Debugging IDL Programs, Starting the Shell, The IDLWAVE Shell
+@node Using the Shell, Commands Sent to the Shell, Starting the Shell, The IDLWAVE Shell
@section Using the Shell
-@cindex comint
+@cindex Comint
@cindex Shell, basic commands
The IDLWAVE shell works in the same fashion as other shell modes in
Emacs. It provides command history, command line editing and job
-control. Here is a list of commonly used commands, see the Emacs
-documentation on @file{comint} for additional information.@refill
+control. The @key{UP} and @key{DOWN} arrows cycle through the input
+history just like in an X terminal@footnote{This is different from
+normal Emacs/Comint behavior, but more like an xterm. If you prefer the
+default comint functionality, check the variable
+@code{idlwave-shell-arrows-do-history}.}. The history is preserved
+between emacs and IDL sessions. Here is a list of commonly used
+commands:
@multitable @columnfractions .12 .88
-@item @kbd{M-p}
-@tab Cycle backwards in input history matching input
-@item @kbd{M-n}
-@tab Cycle forwards
+@item @key{UP}, @key{M-p}
+@tab Cycle backwards in input history
+@item @key{DOWN}, @key{M-n}
+@tab Cycle forwards in input history
@item @kbd{M-r}
@tab Previous input matching a regexp
@item @kbd{M-s}
-@tab Next input that matches a regexp
+@tab Next input matching a regexp
@item @kbd{return}
@tab Send input or copy line to current prompt
@item @kbd{C-c C-a}
@@ -1197,16 +2526,21 @@ documentation on @file{comint} for additional information.@refill
@end multitable
In addition to these standard @file{comint} commands,
-@code{idlwave-shell-mode} has some bindings which correspond to similar
-commands in @code{idlwave-mode}. See @ref{Routine Info} and
-@ref{Completion} for more information on these commands.@refill
-
-@cindex Completion in the shell
-@cindex Routine info in the shell
+@code{idlwave-shell-mode} provides many of the same commands which
+simplify writing IDL code available in IDLWAVE buffers. This includes
+abbreviations, online help, and completion. See @ref{Routine Info} and
+@ref{Online Help} and @ref{Completion} for more information on these
+commands.
+
+@cindex Completion, in the shell
+@cindex Routine info, in the shell
+@cindex Online Help, in the shell
@multitable @columnfractions .12 .88
@item @kbd{@key{TAB}}
-@tab Completion of file names, routine names and keywords
-(@code{idlwave-shell-complete})@refill
+@tab Completion of file names (between quotes and after executive
+commands @samp{.run} and @samp{.compile}), routine names, class names,
+keywords, system variables, system variable tags etc.
+(@code{idlwave-shell-complete}).
@item @kbd{M-@key{TAB}}
@tab Same as @key{TAB}
@item @kbd{C-c ?}
@@ -1222,118 +2556,249 @@ commands in @code{idlwave-mode}. See @ref{Routine Info} and
@tab Compile a library routine (@code{idlwave-resolve})
@end multitable
+@defopt idlwave-shell-arrows-do-history (@code{t})
+Non-@code{nil} means @key{UP} and @key{DOWN} arrows move through command
+history like xterm.
+@end defopt
+
+@defopt idlwave-shell-comint-settings
+Alist of special settings for the comint variables in the IDLWAVE Shell.
+@end defopt
+
@defopt idlwave-shell-file-name-chars
The characters allowed in file names, as a string. Used for file name
-completion.@refill
+completion.
@end defopt
-@node Debugging IDL Programs, , Using the Shell, The IDLWAVE Shell
+@defopt idlwave-shell-graphics-window-size
+Size of IDL graphics windows popped up by special IDLWAVE command.
+@end defopt
+
+@cindex Input mode
+@cindex Character input mode (Shell)
+@cindex Line input mode (Shell)
+@cindex Magic spells, for input mode
+@cindex Spells, magic
+IDLWAVE works in line input mode: You compose a full command line, using
+all the power Emacs gives you to do this. When you press @key{RET}, the
+whole line is sent to IDL. Sometimes it is necessary to send single
+characters (without a newline), for example when an IDL program is
+waiting for single character input with the @code{GET_KBRD} function.
+You can send a single character to IDL with the command @kbd{C-c C-x}
+(@code{idlwave-shell-send-char}). When you press @kbd{C-c C-y}
+(@code{idlwave-shell-char-mode-loop}), IDLWAVE runs a blocking loop
+which accepts characters and immediately sends them to IDL. The loop
+can be exited with @kbd{C-g}. It terminates also automatically when the
+current IDL command is finished. Check the documentation of the two
+variables described below for a way to make IDL programs trigger
+automatic switches of the input mode.
+
+@defopt idlwave-shell-use-input-mode-magic (@code{nil})
+Non-@code{nil} means IDLWAVE should check for input mode spells in
+output.
+@end defopt
+
+@defopt idlwave-shell-input-mode-spells
+The three regular expressions which match the magic spells for input
+modes.
+@end defopt
+
+@node Commands Sent to the Shell, Debugging IDL Programs, Using the Shell, The IDLWAVE Shell
+@section Commands Sent to the Shell
+@cindex Commands in shell, showing
+@cindex Showing commands in shell
+
+The IDLWAVE buffers and shell interact very closely. In addition to the
+normal commands you enter at the @code{IDL>} prompt, many other special
+commands are sent to the shell, sometimes as a direct result of invoking
+a key command, menu item, or toolbar button, but also automatically, as
+part of the normal flow of information updates between the buffer and
+shell.
+
+The commands sent include @code{breakpoint}, @code{.step} and other
+debug commands (@pxref{Debugging IDL Programs}), @code{.run} and other
+compilation statements (@pxref{Compiling Programs}), examination
+commands like @code{print} and @code{help} (@pxref{Examining
+Variables}), and other special purpose commands designed to keep
+information on the running shell current.
+
+By default, much of this background shell input and output is hidden
+from the user, but this is configurable. The custom variable
+@code{idlwave-abbrev-show-commands} allows you to configure which
+commands sent to the shell are shown there. For a related customization
+for separating the output of @emph{examine} commands, see @ref{Examining
+Variables}.
+
+@defopt idlwave-shell-show-commands (@code{'(run misc breakpoint)})
+A list of command types to echo in the shell when sent. Possible values
+are @code{run} for @code{.run}, @code{.compile} and other run commands,
+@code{misc} for lesser used commands like @code{window},
+@code{retall},@code{close}, etc., @code{breakpoint} for breakpoint
+setting and clearing commands, and @code{debug} for other debug,
+stepping, and continue commands. In addition, if the variable is set to
+the single symbol @code{'everything}, all the copious shell input is
+displayed (which is probably only useful for debugging purposes).
+N.B. For hidden commands which produce output by side-effect, that
+output remains hidden (e.g., stepping through a @code{print} command).
+As a special case, any error message in the output will be displayed
+(e.g., stepping to an error).
+@end defopt
+
+@node Debugging IDL Programs, Examining Variables, Commands Sent to the Shell, The IDLWAVE Shell
@section Debugging IDL Programs
@cindex Debugging
@cindex Keybindings for debugging
@cindex Toolbar
Programs can be compiled, run, and debugged directly from the source
-buffer in Emacs. The IDLWAVE shell installs keybindings both in the
-shell buffer and in all IDL code buffers of the current Emacs session.
-On Emacs versions which support this, it also installs a debugging
-toolbar. The display of the toolbar can be toggled with @kbd{C-c C-d
-C-t} (@code{idlwave-shell-toggle-toolbar}).@refill
-
-The debugging keybindings are by default on the prefix key @kbd{C-c
-C-d}, so for example setting a breakpoint is done with @kbd{C-c C-d
-C-b}. If you find this too much work and your ALT key is still
-available, turn on the variable
-@code{idlwave-shell-activate-alt-keybindings} in order to get breakpoint
-setting on @kbd{A-b}. In the remainder of this chapter we will assume
-that the @kbd{C-c C-d} bindings are active.
-
-@defopt idlwave-shell-prefix-key
-The prefix key for the debugging map
-@code{idlwave-shell-mode-prefix-map}.@refill
-@end defopt
+buffer in Emacs, walking through arbitrarily deeply nested code,
+printing expressions and skipping up and down the calling stack along
+the way. IDLWAVE makes compiling and debugging IDL programs far less
+cumbersome by providing a full-featured, key/menu/toolbar-driven
+interface to commands like @code{breakpoint}, @code{.step},
+@code{.run}, etc. It can even perform complex debug operations not
+natively supported by IDL (like continuing to the line at the cursor).
+
+The IDLWAVE shell installs key bindings both in the shell buffer and
+in all IDL code buffers of the current Emacs session, so debug
+commands work in both places (in the shell, commands operate on the
+last file compiled). On Emacs versions which support it, a debugging
+toolbar is also installed. The toolbar display can be toggled with
+@kbd{C-c C-d C-t} (@code{idlwave-shell-toggle-toolbar}).
-@defopt idlwave-shell-activate-prefix-keybindings (@code{t})
-Non-@code{nil} means, debug commands will be bound to the prefix
-key, like @kbd{C-c C-d C-b}.
-@end defopt
-
-@defopt idlwave-shell-activate-alt-keybindings (@code{nil})
-Non-@code{nil} means, debug commands will be bound to alternate
-keys, like @kbd{A-b}.
-@end defopt
@defopt idlwave-shell-use-toolbar (@code{t})
-Non-@code{nil} means, use the debugging toolbar in all IDL related
-buffers.@refill
+Non-@code{nil} means use the debugging toolbar in all IDL related
+buffers.
@end defopt
-
@menu
-* Compiling Programs:: Compiling buffers under the shell
-* Breakpoints and Stepping:: Deciding where to stop and look
-* Examining Variables:: What is the value now?
+* A Tale of Two Modes::
+* Debug Key Bindings::
+* Breakpoints and Stepping::
+* Compiling Programs::
+* Walking the Calling Stack::
+* Electric Debug Mode::
@end menu
-@node Compiling Programs, Breakpoints and Stepping, Debugging IDL Programs, Debugging IDL Programs
-@subsection Compiling Programs
-@cindex Compiling programs
-@cindex Programs, compiling
-@cindex Default command line, executing
-@cindex Executing a default command line
-In order to compile the current buffer under the IDLWAVE shell, press
-@kbd{C-c C-d C-c} (@code{idlwave-save-and-run}). This first saves the
-current buffer and then send the command @samp{.run path/to/file} to the
-shell. You can laso execute @kbd{C-c C-d C-c} from the shell buffer, in
-which case the most recently compiled buffer will be saved and
-re-compiled.
+@node A Tale of Two Modes, Debug Key Bindings, Debugging IDL Programs, Debugging IDL Programs
+@subsection A Tale of Two Modes
+@cindex Electric Debug Mode
+@cindex Debugging Interface
+
+The many debugging, compiling, and examination commands provided in
+IDLWAVE are available simultaneously through two different interfaces:
+the original, multi-key command interface, and the new Electric Debug
+Mode. The functionality they offer is similar, but the way you
+interact with them is quite different. The main difference is that,
+in Electric Debug Mode, the source buffers are made read-only, and
+single key-strokes are used to step through, examine expressions, set
+and remove breakpoints, etc. The same variables, prefix arguments,
+and settings apply to both versions, and both can be used
+interchangeably. By default, when breakpoints are hit, Electric Debug
+Mode is enabled. The traditional interface is described first.
+@xref{Electric Debug Mode}, for more on that mode.
+
+
+@sp 1
+@noindent @strong{Note that electric debug mode can be prevented from
+activating automatically by customizing the variable
+@code{idlwave-shell-automatic-electric-debug}.}
+
+@node Debug Key Bindings, Breakpoints and Stepping, A Tale of Two Modes, Debugging IDL Programs
+@subsection Debug Key Bindings
+@kindex C-c C-d
+@cindex Key bindings
+
+The standard debugging key bindings are always available by default on
+the prefix key @kbd{C-c C-d}, so, for example, setting a breakpoint is
+done with @kbd{C-c C-d C-b}, and compiling a source file with @kbd{C-c
+C-d C-c}. You can also easily configure IDLWAVE to use one or more
+modifier keys not in use by other commands, in lieu of the prefix
+@kbd{C-c C-d} (though these bindings will typically also be available
+--- see @code{idlwave-shell-activate-prefix-keybindings}). For
+example, if you include in @file{.emacs}:
-When developing or debugging a program, it is often necessary to execute
-the same command line many times. A convenient way to do this is
-@kbd{C-c C-d C-y} (@code{idlwave-shell-execute-default-command-line}).
-This command first resets IDL from a state of interrupted execution by
-closing all files and returning to the main interpreter level. Then a
-default command line is send to the shell. To edit the default command
-line, call @code{idlwave-shell-execute-default-command-line} with a
-prefix argument: @kbd{C-u C-c C-d C-y}.@refill
+@lisp
+(setq idlwave-shell-debug-modifiers '(control shift))
+@end lisp
-@defopt idlwave-shell-mark-stop-line (@code{t})
-Non-@code{nil} means, mark the source code line where IDL is currently
-stopped. The value decides about the preferred method. Legal values
-are @code{nil}, @code{t}, @code{arrow}, and @code{face}.@refill
+@noindent a breakpoint can then be set by pressing @kbd{b} while holding down
+@kbd{shift} and @kbd{control} keys, i.e. @kbd{C-S-b}. Compiling a
+source file will be on @kbd{C-S-c}, deleting a breakpoint @kbd{C-S-d},
+etc. In the remainder of this chapter we will assume that the
+@kbd{C-c C-d} bindings are active, but each of these bindings will
+have an equivalent shortcut if modifiers are given in the
+@code{idlwave-shell-debug-modifiers} variable (@pxref{Lesson II --
+Customization}). A much simpler and faster form of debugging for
+running code is also available by default --- see @ref{Electric Debug
+Mode}.
+
+@defopt idlwave-shell-prefix-key (@kbd{C-c C-d})
+The prefix key for the debugging map
+@code{idlwave-shell-mode-prefix-map}.
@end defopt
-@defopt idlwave-shell-overlay-arrow
-The overlay arrow to display at source lines where execution
-halts.@refill
+@defopt idlwave-shell-activate-prefix-keybindings (@code{t})
+Non-@code{nil} means debug commands will be bound to the prefix
+key, like @kbd{C-c C-d C-b}.
@end defopt
-@defopt idlwave-shell-stop-line-face
-The face which highlights the source line where IDL is
-stopped.@refill
+@defopt idlwave-shell-debug-modifiers (@code{nil})
+List of modifier keys to use for additional, alternative binding of
+debugging commands in the shell and source buffers. Can be one or
+more of @code{control}, @code{meta}, @code{super}, @code{hyper},
+@code{alt}, and @code{shift}.
@end defopt
-@node Breakpoints and Stepping, Examining Variables, Compiling Programs, Debugging IDL Programs
+@node Breakpoints and Stepping, Compiling Programs, Debug Key Bindings, Debugging IDL Programs
@subsection Breakpoints and Stepping
@cindex Breakpoints
@cindex Stepping
-
-You can set breakpoints and step through a program with IDLWAVE.
-Setting a breakpoint in the current line of the source buffer is done
-with @kbd{C-c C-d C-b} (@code{idlwave-shell-break-here}). With a prefix
-arg of 1, the breakpoint gets a @code{/ONCE} keyword, meaning that it
-will be deleted after first use. With a numeric prefix greater than
-one, the breakpoint will only be active the @code{nth} time it is hit.
-To clear the breakpoint in the current line, use @kbd{C-c C-d C-d}
-(@code{idlwave-clear-current-bp}). To clear all breakpoints, use
-@kbd{C-c C-d C-a} (@code{idlwave-clear-all-bp}). Breakpoint lines are
-highlighted in the source code.@refill
-
-Once the program has stopped somewhere, you can step through it. Here
-is a summary of the breakpoint and stepping commands:
-
-@multitable @columnfractions .2 .8
+@cindex Execution, controlled
+
+@kindex C-c C-d C-b
+@kindex C-c C-d C-b
+IDLWAVE helps you set breakpoints and step through code. Setting a
+breakpoint in the current line of the source buffer is accomplished
+with @kbd{C-c C-d C-b} (@code{idlwave-shell-break-here}). With a
+prefix arg of 1 (i.e. @kbd{C-1 C-c C-d C-b}), the breakpoint gets a
+@code{/ONCE} keyword, meaning that it will be deleted after first use.
+With a numeric prefix greater than one (e.g. @kbd{C-4 C-c C-d C-b}),
+the breakpoint will only be active the @code{nth} time it is hit.
+With a single non-numeric prefix (i.e. @kbd{C-u C-c C-d C-b}), prompt
+for a condition --- an IDL expression to be evaulated and trigger the
+breakpoint only if true. To clear the breakpoint in the current line,
+use @kbd{C-c C-d C-d} (@code{idlwave-clear-current-bp}). When
+executed from the shell window, the breakpoint where IDL is currently
+stopped will be deleted. To clear all breakpoints, use @kbd{C-c C-d
+C-a} (@code{idlwave-clear-all-bp}). Breakpoints can also be disabled
+and re-enabled: @kbd{C-c C-d C-\}
+(@code{idlwave-shell-toggle-enable-current-bp}).
+
+
+Breakpoint lines are highlighted or indicated with an icon in the
+source code (different icons for conditional, after, and other break
+types). Disabled breakpoints are @emph{grayed out} by default. Note
+that IDL places breakpoints as close as possible on or after the line
+you specify. IDLWAVE queries the shell for the actual breakpoint
+location which was set, so the exact line you specify may not be
+marked. You can re-sync the breakpoint list and display at any time
+(e.g., if you add or remove some on the command line) using @kbd{C-c
+C-d C-l}.
+
+Once the program has stopped somewhere, you can step through it. The
+most important stepping commands are @kbd{C-c C-d C-s} to execute one
+line of IDL code ("step into"); @kbd{C-c C-d C-n} to step a single line,
+treating procedure and function calls as a single step ("step over");
+@kbd{C-c C-d C-h} to continue execution to the line at the cursor and
+@kbd{C-c C-d C-r} to continue execution. @xref{Commands Sent to the
+Shell}, for information on displaying or hiding the breakpoint and
+stepping commands the shell receives. Here is a summary of the
+breakpoint and stepping commands:
+
+@multitable @columnfractions .23 .77
@item @kbd{C-c C-d C-b}
@tab Set breakpoint (@code{idlwave-shell-break-here})
@item @kbd{C-c C-d C-i}
@@ -1342,6 +2807,14 @@ is a summary of the breakpoint and stepping commands:
@tab Clear current breakpoint (@code{idlwave-shell-clear-current-bp})
@item @kbd{C-c C-d C-a}
@tab Clear all breakpoints (@code{idlwave-shell-clear-all-bp})
+@item @kbd{C-c C-d [}
+@tab Go to the previous breakpoint (@code{idlwave-shell-goto-previous-bp})
+@item @kbd{C-c C-d ]}
+@tab Go to the next breakpoint (@code{idlwave-shell-goto-next-bp})
+@item @kbd{C-c C-d C-\}
+@tab Disable/Enable current breakpoint (@code{idlwave-shell-toggle-enable-current-bp})
+@item @kbd{C-c C-d C-j}
+@tab Set a breakpoint at the beginning of the enclosing routine.
@item @kbd{C-c C-d C-s}
@tab Step, into function calls (@code{idlwave-shell-step})
@item @kbd{C-c C-d C-n}
@@ -1357,51 +2830,296 @@ is a summary of the breakpoint and stepping commands:
@item @kbd{C-c C-d C-h}
@tab Continue to line at cursor position (@code{idlwave-shell-to-here})
@item @kbd{C-c C-d C-r}
-@tab Continue execution to next breakpoint (@code{idlwave-shell-cont})
+@tab Continue execution to next breakpoint, if any (@code{idlwave-shell-cont})
@item @kbd{C-c C-d C-up}
@tab Show higher level in calling stack (@code{idlwave-shell-stack-up})
@item @kbd{C-c C-d C-down}
@tab Show lower level in calling stack (@code{idlwave-shell-stack-down})
@end multitable
+All of these commands have equivalents in Electric Debug Mode, which
+provides faster access (@pxref{Electric Debug Mode}).
+
@defopt idlwave-shell-mark-breakpoints (@code{t})
-Non-@code{nil} means, mark breakpoints in the source file buffers. The
+Non-@code{nil} means mark breakpoints in the source file buffers. The
value indicates the preferred method. Legal values are @code{nil},
@code{t}, @code{face}, and @code{glyph}.
@end defopt
@defopt idlwave-shell-breakpoint-face
The face for breakpoint lines in the source code if
-@code{idlwave-shell-mark-breakpoints} has the value @code{face}.@refill
+@code{idlwave-shell-mark-breakpoints} has the value @code{face}.
+@end defopt
+
+@node Compiling Programs, Walking the Calling Stack, Breakpoints and Stepping, Debugging IDL Programs
+@subsection Compiling Programs
+@cindex Compiling programs
+@cindex Programs, compiling
+@cindex Default command line, executing
+@cindex Executing a default command line
+
+@kindex C-c C-d C-c
+In order to compile the current buffer under the IDLWAVE shell, press
+@kbd{C-c C-d C-c} (@code{idlwave-save-and-run}). This first saves the
+current buffer and then sends the command @samp{.run path/to/file} to the
+shell. You can also execute @kbd{C-c C-d C-c} from the shell buffer, in
+which case the most recently compiled buffer will be saved and
+re-compiled.
+
+When developing or debugging a program, it is often necessary to execute
+the same command line many times. A convenient way to do this is
+@kbd{C-c C-d C-y} (@code{idlwave-shell-execute-default-command-line}).
+This command first resets IDL from a state of interrupted execution by
+closing all files and returning to the main interpreter level. Then a
+default command line is send to the shell. To edit the default command
+line, call @code{idlwave-shell-execute-default-command-line} with a
+prefix argument: @kbd{C-u C-c C-d C-y}. If no default command line has
+been set (or you give two prefix arguments), the last command on the
+@code{comint} input history is sent.
+
+@defopt idlwave-shell-mark-stop-line (@code{t})
+Non-@code{nil} means mark the source code line where IDL is currently
+stopped. The value specifies the preferred method. Legal values are
+@code{nil}, @code{t}, @code{arrow}, and @code{face}.
+@end defopt
+
+@defopt idlwave-shell-overlay-arrow (@code{">"})
+The overlay arrow to display at source lines where execution halts, if
+configured in @code{idlwave-shell-mark-stop-line}.
@end defopt
-@node Examining Variables, , Breakpoints and Stepping, Debugging IDL Programs
-@subsection Examining Variables
+@defopt idlwave-shell-stop-line-face
+The face which highlights the source line where IDL is stopped, if
+configured in @code{idlwave-shell-mark-stop-line}.
+@end defopt
+
+@node Walking the Calling Stack, Electric Debug Mode, Compiling Programs, Debugging IDL Programs
+@subsection Walking the Calling Stack
+@cindex Calling stack, walking
+
+While debugging a program, it can be very useful to check the context in
+which the current routine was called, for instance to help understand
+the value of the arguments passed. To do so conveniently you need to
+examine the calling stack. If execution is stopped somewhere deep in a
+program, you can use the commands @kbd{C-c C-d C-@key{UP}}
+(@code{idlwave-shell-stack-up}) and @kbd{C-c C-d C-@key{DOWN}}
+(@code{idlwave-shell-stack-down}), or the corresponding toolbar buttons,
+to move up or down through the calling stack. The mode line of the
+shell window will indicate the position within the stack with a label
+like @samp{[-3:MYPRO]}. The line of IDL code at that stack position
+will be highlighted. If you continue execution, IDLWAVE will
+automatically return to the current level. @xref{Examining Variables},
+for information how to examine the value of variables and expressions on
+higher calling stack levels.
+
+@ifhtml
+
+@end ifhtml
+@node Electric Debug Mode, , Walking the Calling Stack, Debugging IDL Programs
+@subsection Electric Debug Mode
+@cindex Electric Debug Mode
+@cindex @samp{*Debugging*}
+
+Even with a convenient debug key prefix enabled, repetitive stepping,
+variable examination (@pxref{Examining Variables}), and other
+debugging activities can be awkward and slow using commands which
+require multiple keystrokes. Luckily, there's a better way, inspired
+by the lisp e-debug mode, and available through the @emph{Electric
+Debug Mode}. By default, as soon as a breakpoint is hit, this minor
+mode is enabled. The buffer showing the line where execution has
+halted is switched to Electric Debug Mode. This mode is visible as
+@samp{*Debugging*} in the mode line, and a different face (violet by
+default, where color is available) for the line stopped at point. The
+buffer is made read-only and single-character bindings for the most
+commonly used debugging commands are enabled:
+
+@multitable @columnfractions .2 .8
+@item @kbd{a}
+@tab Clear all breakpoints (@code{idlwave-shell-clear-all-bp})
+@item @kbd{b}
+@tab Set breakpoint, @kbd{C-u b} for a conditional break, @kbd{C-n b} for nth hit (@code{idlwave-shell-break-here})
+@item @kbd{d}
+@tab Clear current breakpoint (@code{idlwave-shell-clear-current-bp})
+@item @kbd{h}
+@tab Continue to the line at cursor position (@code{idlwave-shell-to-here})
+@item @kbd{i}
+@tab Set breakpoint in function named here (@code{idlwave-shell-break-in})
+@item @kbd{[}
+@tab Go to the previous breakpoint in the file (@code{idlwave-shell-goto-previous-bp})
+@item @kbd{]}
+@tab Go to the next breakpoint in the file
+(@code{idlwave-shell-goto-next-bp})
+@item @kbd{\}
+@tab Disable/Enable current breakpoint (@code{idlwave-shell-toggle-enable-current-bp})
+@item @kbd{j}
+@tab Set breakpoint at beginning of enclosing routine (@code{idlwave-shell-break-this-module})
+@item @kbd{k}
+@tab Skip one statement (@code{idlwave-shell-skip})
+@item @kbd{m}
+@tab Continue to end of function (@code{idlwave-shell-return})
+@item @kbd{n}
+@tab Step, over function calls (@code{idlwave-shell-stepover})
+@item @kbd{o}
+@tab Continue past end of function (@code{idlwave-shell-out})
+@item @kbd{p}
+@tab Print expression near point or in region with @kbd{C-u p} (@code{idlwave-shell-print})
+@item @kbd{q}
+@tab End the debugging session and return to the Shell's main level
+(@code{idlwave-shell-retall})
+@item @kbd{r}
+@tab Continue execution to next breakpoint, if any (@code{idlwave-shell-cont})
+@item @kbd{s} or @kbd{@key{SPACE}}
+@tab Step, into function calls (@code{idlwave-shell-step})
+@item @kbd{t}
+@tab Print a calling-level traceback in the shell
+@item @kbd{u}
+@tab Continue to end of block (@code{idlwave-shell-up})
+@item @kbd{v}
+@tab Turn Electric Debug Mode off
+(@code{idlwave-shell-electric-debug-mode})
+@item @kbd{x}
+@tab Examine expression near point (or in region with @kbd{C-u x})
+with shortcut of examine type.
+@item @kbd{z}
+@tab Reset IDL (@code{idlwave-shell-reset})
+@item @kbd{+} or @kbd{=}
+@tab Show higher level in calling stack (@code{idlwave-shell-stack-up})
+@item @kbd{-} or @kbd{_}
+@tab Show lower level in calling stack (@code{idlwave-shell-stack-down})
+@item @kbd{?}
+@tab Help on expression near point or in region with @kbd{C-u ?}
+(@code{idlwave-shell-help-expression})
+@item @kbd{C-?}
+@tab Show help on the commands available.
+@end multitable
+
+Most single-character electric debug bindings use the final keystroke
+of the equivalent multiple key commands (which are of course also
+still available), but some differ (e.g. @kbd{t},@kbd{q},@kbd{x}).
+Some have additional convenience bindings (like @kbd{@key{SPACE}} for
+stepping). All prefix and other argument options described in this
+section for the commands invoked by electric debug bindings are still
+valid. For example, @kbd{C-u b} sets a conditional breakpoint, just
+as it did with @kbd{C-u C-c C-d C-b}.
+
+You can toggle the electric debug mode at any time in a buffer using
+@kbd{C-c C-d C-v} (@kbd{v} to turn it off while in the mode), or from
+the Debug menu. Normally the mode will be enabled and disabled at the
+appropriate times, but occassionally you might want to edit a file
+while still debugging it, or switch to the mode for conveniently
+setting lots of breakpoints.
+
+To quickly abandon a debugging session and return to normal editing at
+the Shell's main level, use @kbd{q} (@code{idlwave-shell-retall}).
+This disables electric debug mode in all IDLWAVE buffers@footnote{Note
+that this binding is not symmetric: @kbd{C-c C-d C-q} is bound to
+@code{idlwave-shell-quit}, which quits your IDL session.}. Help is
+available for the command shortcuts with @kbd{C-?}. If you find this
+mode gets in your way, you can keep it from automatically activating
+by setting the variable @code{idlwave-shell-automatic-electric-debug}
+to @code{nil}, or @code{'breakpoint}. If you'd like the convenient
+electric debug shortcuts available also when run-time errors are
+encountered, set to @code{t}.
+
+@defopt idlwave-shell-automatic-electric-debug (@code{'breakpoint})
+Whether to enter electric debug mode automatically when a breakpoint
+or run-time error is encountered, and then disable it in all buffers
+when the $MAIN$ level is reached (either through normal program
+execution, or retall). In addition to @code{nil} for never, and
+@code{t} for both breakpoints and errors, this can be
+@code{'breakpoint} (the default) to enable it only at breakpoint
+halts.
+@end defopt
+
+@defopt idlwave-shell-electric-zap-to-file (@code{t})
+If set, when entering electric debug mode, select the window displaying
+the file where point is stopped. This takes point away from the shell
+window, but is useful for immediate stepping, etc.
+@end defopt
+
+@ifhtml
+
+@end ifhtml
+@node Examining Variables, Custom Expression Examination, Debugging IDL Programs, The IDLWAVE Shell
+@section Examining Variables
@cindex @code{PRINT} expressions
@cindex @code{HELP}, on expressions
-@cindex Expressions, printing
-@cindex Expressions, help
+@cindex Expressions, printing & help
+@cindex Examining expressions
+@cindex Printing expressions
@cindex Mouse binding to print expressions
-When execution is stopped you can examine the values of variables. The
-command @kbd{C-c C-d C-p} prints the expression at point in the shell
-buffer, while @kbd{C-c C-d ?} shows help on this expression. The
-expression at point is an array expression or a function call, or the
-contents of a pair of parenthesis. The selected expression becomes
-highlighted in the source code for a short time.
-
-I find it very convenient to bind these functions to a mouse event, so
-that simply clicking on an expression prints its value. Here is a way
-to do this with XEmacs:
+@kindex C-c C-d C-p
+Do you find yourself repeatedly typing,
+e.g. @code{print,n_elements(x)}, and similar statements to remind
+yourself of the type/size/structure/value/etc. of variables and
+expressions in your code or at the command line? IDLWAVE has a suite
+of special commands to automate these types of variable or expression
+examinations. They work by sending statements to the shell formatted
+to include the indicated expression.
+
+These examination commands can be used in the shell or buffer at any
+time (as long as the shell is running), and are very useful when
+execution is stopped in a buffer due to a triggered breakpoint or error,
+or while composing a long command in the IDLWAVE shell. In the latter
+case, the command is sent to the shell and its output is visible, but
+point remains unmoved in the command being composed --- you can inspect
+the contituents of a command you're building without interrupting the
+process of building it! You can even print arbitrary expressions from
+older input or output further up in the shell window --- any expression,
+variable, number, or function you see can be examined.
+
+If the variable @code{idlwave-shell-separate-examine-output} is
+non-@code{nil} (the default), all examine output will be sent to a
+special @file{*Examine*} buffer, rather than the shell. The output of
+prior examine commands is saved. In this buffer @key{c} clears the
+contents, and @key{q} hides the buffer.
+
+The two most basic examine commands are bound to @kbd{C-c C-d C-p}, to
+print the expression at point, and @kbd{C-c C-d ?}, to invoke help on
+this expression@footnote{Available as @kbd{p} and @kbd{?} in Electric
+Debug Mode (@pxref{Electric Debug Mode})}. The expression at point is
+either an array expression or a function call, or the contents of a
+pair of parentheses. The selected expression is highlighted, and
+simultaneously the resulting output is highlighted in the shell.
+Calling the above commands with a prefix argument will use the current
+region as expression instead of using the one at point. Two prefix
+arguments (@kbd{C-u C-u C-c C-d C-p}) will prompt for an expression.
+
+For added speed and convenience, there are mouse bindings which allow
+you to click on expressions and examine their values. Use
+@kbd{S-Mouse-2} to print an expression and @kbd{C-M-Mouse-2} to invoke
+help (i.e. you need to hold down @key{META} and @key{CONTROL} while
+clicking with the middle mouse button). If you simply click, the
+nearest expression will be selected in the same manner as described
+above. You can also @emph{drag} the mouse in order to highlight
+exactly the specific expression or sub-expression you want to examine.
+For custom expression examination, and the powerful customizable
+pop-up examine selection, @xref{Custom Expression Examination}.
+
+@cindex Printing expressions, on calling stack
+@cindex Restrictions for expression printing
+The same variable inspection commands work both in the IDL Shell and
+IDLWAVE buffers, and even for variables at higher levels of the calling
+stack. For instance, if you're stopped at a breakpoint in a routine,
+you can examine the values of variables and expressions inside its
+calling routine, and so on, all the way up through the calling stack.
+Simply step up the stack, and print variables as you see them
+(@pxref{Walking the Calling Stack}, for information on stepping back
+through the calling stack). The following restrictions apply for all
+levels except the current:
-@lisp
-(add-hook 'idlwave-shell-mode-hook
- (lambda()
- (define-key idlwave-mode-map [(shift button1)]
- 'idlwave-shell-mouse-print)
- (define-key idlwave-mode-map [(shift button2)]
- 'idlwave-shell-mouse-help)))
-@end lisp
+@itemize @bullet
+@item
+Array expressions must use the @samp{[ ]} index delimiters. Identifiers
+with a @samp{( )} will be interpreted as function calls.
+@item
+@cindex ROUTINE_NAMES, IDL procedure
+N.B.: printing values of expressions on higher levels of the calling
+stack uses the @emph{unsupported} IDL routine @code{ROUTINE_NAMES},
+which may or may not be available in future versions of IDL. Caveat
+Examinor.
+@end itemize
@defopt idlwave-shell-expression-face
The face for @code{idlwave-shell-expression-overlay}.
@@ -1409,309 +3127,754 @@ Allows you to choose the font, color and other properties for
the expression printed by IDL.
@end defopt
+@defopt idlwave-shell-output-face
+The face for @code{idlwave-shell-output-overlay}.
+Allows to choose the font, color and other properties for the most
+recent output of IDL when examining an expression."
+@end defopt
+
+@defopt idlwave-shell-separate-examine-output (@code{t})
+If non-@code{nil}, re-direct the output of examine commands to a special
+@file{*Examine*} buffer, instead of in the shell itself.
+@end defopt
+
+@node Custom Expression Examination, , Examining Variables, The IDLWAVE Shell
+@section Custom Expression Examination
+@cindex Expressions, custom examination
+@cindex Custom expression examination
+
+The variety of possible variable and expression examination commands is
+endless (just look, for instance, at the keyword list to
+@code{widget_info()}). Rather than attempt to include them all, IDLWAVE
+provides two easy methods to customize your own commands, with a special
+mouse examine command, and two macros for generating your own examine
+key and mouse bindings.
+
+The most powerful and flexible mouse examine command of all is
+available on @kbd{C-S-Mouse-2}. Just as for all the other mouse
+examine commands, it permits click or drag expression selection, but
+instead of sending hard-coded commands to the shell, it pops-up a
+customizable selection list of examine functions to choose among,
+configured with the @code{idlwave-shell-examine-alist}
+variable@footnote{In Electric Debug Mode (@pxref{Electric Debug
+Mode}), the key @kbd{x} provides a single-character shortcut interface
+to the same examine functions for the expression at point or marked by
+the region.}. This variable is a list of key-value pairs (an
+@emph{alist} in Emacs parlance), where the key gives a name to be
+shown for the examine command, and the value is the command strings
+itself, in which the text @code{___} (three underscores) will be
+replaced by the selected expression before being sent to the shell.
+An example might be key @code{Structure Help} with value
+@code{help,___,/STRUCTURE}. In that case, you'd be prompted with
+@emph{Structure Help}, which might send something like
+@code{help,var,/STRUCTURE} to the shell for output.
+@code{idlwave-shell-examine-alist} comes configured by default with a
+large list of examine commands, but you can easily customize it to add
+your own.
+
+In addition to configuring the functions available to the pop-up mouse
+command, you can easily create your own customized bindings to inspect
+expressions using the two convenience macros
+@code{idlwave-shell-examine} and @code{idlwave-shell-mouse-examine}.
+These create keyboard or mouse-based custom inspections of variables,
+sharing all the same properties of the built-in examine commands.
+Both functions take a single string argument sharing the syntax of the
+@code{idlwave-shell-examine-alist} values, e.g.:
+
+@lisp
+(add-hook 'idlwave-shell-mode-hook
+ (lambda ()
+ (idlwave-shell-define-key-both [s-down-mouse-2]
+ (idlwave-shell-mouse-examine
+ "print, size(___,/DIMENSIONS)"))
+ (idlwave-shell-define-key-both [f9] (idlwave-shell-examine
+ "print, size(___,/DIMENSIONS)"))
+ (idlwave-shell-define-key-both [f10] (idlwave-shell-examine
+ "print,size(___,/TNAME)"))
+ (idlwave-shell-define-key-both [f11] (idlwave-shell-examine
+ "help,___,/STRUCTURE"))))
+@end lisp
+
+@noindent Now pressing @key{f9}, or middle-mouse dragging with the
+@key{SUPER} key depressed, will print the dimensions of the nearby or
+highlighted expression. Pressing @key{f10} will give the type string,
+and @key{f11} will show the contents of a nearby structure. As you can
+see, the possibilities are only marginally finite.
+
+@defopt idlwave-shell-examine-alist
+An alist of examine commands in which the keys name the command and
+are displayed in the selection pop-up, and the values are custom IDL
+examine command strings to send, after all instances of @code{___}
+(three underscores) are replaced by the indicated expression.
+@end defopt
+
-@node Installation, Acknowledgement, The IDLWAVE Shell, Top
+@node Installation, Acknowledgements, The IDLWAVE Shell, Top
@chapter Installation
@cindex Installation
-@cindex FTP site
-@cindex URL, homepage for IDLWAVE
-@cindex Homepage for IDLWAVE
@menu
* Installing IDLWAVE:: How to install the distribution
-* Upgrading from idl.el:: Necessary configuration changes
+* Installing Online Help:: Where to get the additional files needed
@end menu
-@node Installing IDLWAVE, Upgrading from idl.el, Installation, Installation
+@node Installing IDLWAVE, Installing Online Help, Installation, Installation
@section Installing IDLWAVE
-IDLWAVE is part of Emacs 21.1 and later. It is also@footnote{or will be
-soon} an XEmacs packages and can be installed from
+@cindex FTP site
+@cindex URL, homepage for IDLWAVE
+@cindex Homepage for IDLWAVE
+@cindex IDLWAVE, homepage
+@cindex XEmacs package IDLWAVE
+@cindex Emacs, distributed with IDLWAVE
+@cindex Copyright, of IDL manual
+IDLWAVE is part of Emacs 21.1 and later. It is also an XEmacs package
+and can be installed from
@uref{ftp://ftp.xemacs.org/pub/xemacs/packages/,the XEmacs ftp site}
-with the normal package management system on XEmacs 21.@refill
+with the normal package management system on XEmacs 21. These
+pre-installed versions should work out-of-the-box. However, the HTML
+files required for online HTML help are not distributed with
+XEmacs/Emacs and have to be installed separately@footnote{Due to
+copyright reasons, the HTML version of the IDL manual cannot be
+distributed under the GPL.} (@pxref{Installing Online Help}).
You can also download IDLWAVE and install it yourself from
-@uref{http://www.strw.leidenuniv.nl/~dominik/Tools/idlwave, the maintainers
-webpage}. Follow the instructions in the INSTALL file.@refill
+@uref{@value{IDLWAVE-HOMEPAGE}, the maintainers webpage}. Follow the
+instructions in the INSTALL file.
-@node Upgrading from idl.el, , Installing IDLWAVE, Installation
-@section Upgrading from the old @b{@file{idl.el}} file
-@cindex Upgrading from old @b{@file{idl.el}}
-@cindex Renaming old variables
-@cindex Old variables, renaming
+@node Installing Online Help, , Installing IDLWAVE, Installation
+@section Installing Online Help
+@cindex Installing online help
+@cindex Online Help, Installation
-If you have been using the old @file{idl.el} and @file{idl-shell.el}
-files and would like to use IDLWAVE, you need to update your
-customization in @file{.emacs}.
+If you want to use the online help display, an additional set of files
+(HTML versions of the IDL documentation) must be installed. These
+files can also be downloaded from @uref{@value{IDLWAVE-HOMEPAGE}, the
+maintainers webpage}. You need to place the files somewhere on your
+system and tell IDLWAVE where they are with
-@enumerate
-@item
-Change all variable and function prefixes from @samp{idl-} to @samp{idlwave-}.
-@item
-Remove the now invalid @code{autoload} and @code{auto-mode-alist} forms
-pointing to the @file{idl.el} and @file{idl-shell.el} files.
-@item
-If you have been using the hook function recommended in earlier versions
-to get a separate frame for the IDL shell, remove that command from your
-@code{idlwave-shell-mode-hook}. Instead, set the variable
-@code{idlwave-shell-use-dedicated-frame} with
@lisp
-(setq idlwave-shell-use-dedicated-frame t)
+(setq idlwave-html-help-location "/path/to/help/dir/") ;e.g. /usr/local/etc
@end lisp
-@end enumerate
-@node Acknowledgement, Sources of Routine Info, Installation, Top
-@chapter Acknowledgement
-@cindex Acknowledgement
+Note that the help package only changes with new versions of the IDL
+documentation, and need not be updated unless your version of IDL
+changes.
+
+@node Acknowledgements, Sources of Routine Info, Installation, Top
+@chapter Acknowledgements
+@cindex Acknowledgements
+@cindex Maintainer, of IDLWAVE
+@cindex Authors, of IDLWAVE
+@cindex Contributors, to IDLWAVE
+@cindex Email address, of Maintainer
@cindex Thanks
-@file{idl.el} and @file{idl-shell.el} were written by
-@uref{mailto:chase@@att.com, Chris Chase}. The package
-was extended and renamed to IDLWAVE by the current maintainer
-@uref{mailto:dominik@@strw.leidenuniv.nl, Carsten Dominik}.
+@noindent
+The main contributors to the IDLWAVE package have been:
+
+@itemize @minus
+@item
+@uref{mailto:chase@@att.com, @b{Chris Chase}}, the original author.
+Chris wrote @file{idl.el} and @file{idl-shell.el} and maintained them
+for several years.
+
+@item
+@uref{mailto:dominik@@astro.uva.nl, @b{Carsten Dominik}} was in charge
+of the package from version 3.0, during which time he overhauled almost
+everything, modernized IDLWAVE with many new features, and developed the
+manual.
+
+@item
+@uref{mailto:jdsmith@@as.arizona.edu, @b{J.D. Smith}}, the current
+maintainer, as of version 4.10, helped shape object method completion
+and most new features introduced in versions 4.x, and added
+significant new capabilities for versions 5.x.
+@end itemize
-Thanks to the following people who have contributed to the development
-of IDLWAVE with patches, ideas, bug reports and suggestions.
+@noindent
+The following people have also contributed to the development of IDLWAVE
+with patches, ideas, bug reports and suggestions.
@itemize @minus
@item
-Ulrik Dickow
+Ulrik Dickow
@item
-Eric E. Dors
+Eric E. Dors
@item
-Stein Vidar H. Haugan
+Stein Vidar H. Haugan
@item
-David Huenemoerder
+David Huenemoerder
@item
-Kevin Ivory
+Kevin Ivory
@item
-Xuyong Liu
+Dick Jackson
@item
-Simon Marshall
+Xuyong Liu
@item
-Laurent Mugnier
+Simon Marshall
@item
-Lubos Pochman
+Craig Markwardt
@item
-Patrick M. Ryan
+Laurent Mugnier
@item
-Marty Ryba
+Lubos Pochman
@item
-Phil Williams
+Bob Portmann
@item
-J.D. Smith
+Patrick M. Ryan
@item
-Phil Sterne
+Marty Ryba
+@item
+Phil Williams
+@item
+Phil Sterne
+@item
+Paul Sorenson
@end itemize
-@node Sources of Routine Info, Configuration Examples, Acknowledgement, Top
+@noindent
+Thanks to everyone!
+
+@node Sources of Routine Info, HTML Help Browser Tips, Acknowledgements, Top
@appendix Sources of Routine Info
-In @ref{Routine Info} and @ref{Completion} it was shown how IDLWAVE
-displays the calling sequence and keywords of routines, and how it
-completes routine names and keywords. For these features to work,
-IDLWAVE must know about the accessible routines.
+@cindex Sources of routine information
+In @ref{Routine Info} and @ref{Completion} we showed how IDLWAVE
+displays the calling sequence and keywords of routines, and completes
+routine names and keywords. For these features to work, IDLWAVE must
+know about the accessible routines.
@menu
* Routine Definitions:: Where IDL Routines are defined.
-* Routine Information Sources:: So how does IDLWAVE know about...
-* Library Scan:: Scanning the Libraries for Routine Info
-* Updating idlw-rinfo.el:: Scanning the IDL Manuals
+* Routine Information Sources:: So how does IDLWAVE know about...
+* Catalogs::
+* Load-Path Shadows:: Routines defined in several places
+* Documentation Scan:: Scanning the IDL Manuals
@end menu
@node Routine Definitions, Routine Information Sources, Sources of Routine Info, Sources of Routine Info
-@section Routine Definitions
+@appendixsec Routine Definitions
@cindex Routine definitions
+@cindex IDL variable @code{!PATH}
+@cindex @code{!PATH}, IDL variable
+@cindex @code{CALL_EXTERNAL}, IDL routine
+@cindex @code{LINKIMAGE}, IDL routine
+@cindex External routines
-Routines which can be used in an IDL program can be defined in several
-places:
+@noindent Routines which can be used in an IDL program can be defined in
+several places:
@enumerate
@item
-@emph{System routines} are defined inside IDL itself. The source
-code of such routines is not accessible to the user.@refill
+@emph{Builtin routines} are defined inside IDL itself. The source
+code of such routines is not available.
@item
-Routines @emph{part of the current program} are defined in a file which
-is explicitly compiled by the user. This file may be located on the IDL
-search path, but this is not certain.@refill
+Routines which are @emph{part of the current program}, are defined in a
+file explicitly compiled by the user. This file may or may not be
+located on the IDL search path.
@item
-@emph{Library routines} are defined in special files which are located
-somewhere on IDL's search path. When a library routine is called for
-the first time, IDL will find the source file and compile it
-dynamically.@refill
+@emph{Library routines} are defined in files located on IDL's search
+path, and will not need to be manually compiled. When a library routine
+is called for the first time, IDL will find the source file and compile
+it dynamically. A special sub-category of library routines are the
+@emph{system routines} distributed with IDL, and usually available in
+the @file{lib} subdirectory of the IDL distribution.
@item
External routines written in other languages (like Fortran or C) can be
called with @code{CALL_EXTERNAL}, linked into IDL via @code{LINKIMAGE},
or included as dynamically loaded modules (DLMs). Currently IDLWAVE
-cannot provide routine info and completion for external
-routines.@refill
+cannot provide routine info and completion for such external routines.
@end enumerate
-@node Routine Information Sources, Library Scan, Routine Definitions, Sources of Routine Info
-@section Routine Information Sources
+@node Routine Information Sources, Catalogs, Routine Definitions, Sources of Routine Info
+@appendixsec Routine Information Sources
@cindex Routine info sources
+@cindex Builtin list of routines
+@cindex Updating routine info
+@cindex Scanning buffers for routine info
+@cindex Buffers, scanning for routine info
+@cindex Shell, querying for routine info
-In oder to know about as many routines as possible, IDLWAVE will do the
-following to collect information:@refill
+@noindent To maintain the most comprehensive information about all IDL
+routines on a system, IDLWAVE collects data from many sources:
@enumerate
@item
-It has a @emph{builtin list} with the properties of the builtin IDL
-routines. IDLWAVE @value{VERSION} is distributed with a list of
+It has a @emph{builtin list} with information about the routines IDL
+ships with. IDLWAVE @value{VERSION} is distributed with a list of
@value{NSYSROUTINES} routines and @value{NSYSKEYWORDS} keywords,
reflecting IDL version @value{IDLVERSION}. This list has been created
by scanning the IDL manuals and is stored in the file
-@file{idlw-rinfo.el}. @xref{Updating idlw-rinfo.el}, for
-information how to regenerate this file for new versions of IDL.@refill
+@file{idlw-rinfo.el}. @xref{Documentation Scan}, for information on
+how to regenerate this file for new versions of IDL.
-@item
+@item
It @emph{scans} all @emph{buffers} of the current Emacs session for
routine definitions. This is done automatically when routine
-information or completion is first requested by the user. The command
-@kbd{C-c C-i} (@code{idlwave-update-routine-info}) can be used at any
-time to rescan all buffers.@refill
+information or completion is first requested by the user. Each new
+buffer and each buffer saved after making changes is also scanned. The
+command @kbd{C-c C-i} (@code{idlwave-update-routine-info}) can be used
+at any time to rescan all buffers.
@item
-If you have an IDLWAVE-Shell running as inferior process of the current
-Emacs session, IDLWAVE will @emph{query the shell} for compiled routines
-and their arguments. This happens automatically when routine
-information or completion is first requested by the user. The command
-@kbd{C-c C-i} (@code{idlwave-update-routine-info}) can be used to ask
-the shell again at any time.@refill
+If you have an IDLWAVE-Shell running in the Emacs session, IDLWAVE will
+@emph{query the shell} for compiled routines and their arguments. This
+happens automatically when routine information or completion is first
+requested by the user, and each time an Emacs buffer is compiled with
+@kbd{C-c C-d C-c}. Though rarely necessary, the command @kbd{C-c C-i}
+(@code{idlwave-update-routine-info}) can be used to update the shell
+routine data.
@item
-IDLWAVE can scan all or selected library files and store the result in a
-file which will be automatically loaded just like
-@file{idlw-rinfo.el}. @xref{Library Scan}, for information how to
-scan library files.@refill
+Many popular libraries are distributed with routine information
+already scanned into @emph{library catalogs} (@pxref{Library
+Catalogs}). These per-directory catalog files can also be built by
+the user with the supplied @file{idlwave_catalog} tool.
+
+@item
+IDLWAVE can scan selected directories of source files and store the
+result in a single @emph{user catalog} file which will be
+automatically loaded just like @file{idlw-rinfo.el}. @xref{User
+Catalog}, for information on how to scan files in this way.
@end enumerate
+Loading routine and catalog information can be a time consuming process,
+especially over slow networks. Depending on the system and network
+configuration it could take up to 30 seconds. In order to minimize the
+wait time upon your first completion or routine info command in a
+session, IDLWAVE uses Emacs idle time to do the initialization in six
+steps, yielding to user input in between. If this gets into your way,
+set the variable @code{idlwave-init-rinfo-when-idle-after} to 0 (zero).
+The more routines documented in library and user catalogs, the slower
+the loading will be, so reducing this number can help alleviate any long
+load times.
+
+@defopt idlwave-init-rinfo-when-idle-after (@code{10})
+Seconds of idle time before routine info is automatically initialized.
+@end defopt
+
@defopt idlwave-scan-all-buffers-for-routine-info (@code{t})
-Non-@code{nil} means, scan all buffers for IDL programs when updating
-info. When this variable is @code{nil}, it only parses the current
-buffer.@refill
+Non-@code{nil} means scan all buffers for IDL programs when updating
+info.
@end defopt
@defopt idlwave-query-shell-for-routine-info (@code{t})
Non-@code{nil} means query the shell for info about compiled routines.
@end defopt
+@defopt idlwave-auto-routine-info-updates
+Controls under what circumstances routine info is updated automatically.
+@end defopt
-@node Library Scan, Updating idlw-rinfo.el, Routine Information Sources, Sources of Routine Info
-@section Library Scan
-@cindex Library scan
-@cindex IDL library routine info
-
-IDLWAVE can extract routine information from library modules and store
-that information in a file. To do this, the variable
-@code{idlwave-libinfo-file} needs to contain the path to a file in an
-existing directory (e.g. @code{"~/idlwave_libinfo.el"}). Since the file
-will contain lisp code, it should end in @file{.el}. Under Windows and
-MacOS, you also need to specify the search path for IDL library files in
-the variable @code{idlwave-library-path}. Under UNIX, this path will
-be automatically inferred from an IDLWAVE shell.@refill
-
-The command @kbd{M-x idlwave-create-libinfo-file} can then be used to
-scan library files. It brings up a widget in which you can select some
-or all directories on the search path. Pressing the @w{@samp{[Scan & Save]}}
-button in the widget will scan all files in the selected directories and
-write the resulting routine information into the file
-@code{idlwave-libinfo-file}. In order to update the library information
-from the same directories, call the command
-@code{idlwave-update-routine-info} with a double prefix argument:
-@kbd{C-u C-u C-c C-i}. This will rescan files in the previously
-selected directories, write an updated version of the libinfo file and
-rebuild IDLWAVEs internal lists.@refill
+@ifhtml
+
+@end ifhtml
+@node Catalogs, Load-Path Shadows, Routine Information Sources, Sources of Routine Info
+@appendixsec Catalogs
+@cindex Catalogs
+
+@emph{Catalogs} are files containing scanned information on individual
+routines, including arguments and keywords, calling sequence, file path,
+class and procedure vs. function type, etc. They represent a way of
+extending the internal built-in information available for IDL system
+routines (@pxref{Routine Info}) to other source collections.
+
+Starting with version 5.0, there are two types of catalogs available
+with IDLWAVE. The traditional @emph{user catalog} and the newer
+@emph{library catalogs}. Although they can be used interchangeably, the
+library catalogs are more flexible, and preferred. There are few
+occasions when a user catalog might be preferred --- read below. Both
+types of catalogs can coexist without causing problems.
+
+To facilitate the catalog systems, IDLWAVE stores information it gathers
+from the shell about the IDL search paths, and can write this
+information out automatically, or on-demand (menu @code{Debug->Save Path
+Info}). On systems with no shell from which to discover the path
+information (e.g. Windows), a library path must be specified in
+@code{idlwave-library-path} to allow library catalogs to be located, and
+to setup directories for user catalog scan (@pxref{User Catalog} for
+more on this variable).
+
+@defopt idlwave-auto-write-path (@code{t})
+Write out information on the !PATH and !DIR paths from IDL automatically
+when they change and when the Shell is closed. These paths are needed
+to locate library catalogs.
+@end defopt
-A note of caution: Depending on your local installation, the IDL
-library can be very large. Parsing it for routine information will take
-time and loading this information into Emacs can require a
-significant amount of memory.@refill
+@defopt idlwave-library-path
+IDL library path for Windows and MacOS. Not needed under Unix/MacOSX.
+@end defopt
-A routine which is both in the library listing and compiled under the
-shell will show up twice in the @file{*Completions*} listing. This is
-usually not a serious problem. However, if you have scanned the part of
-the library relevant for you, and if you are not compiling files which
-are not on the library search path, the information about compiled
-routines is in fact unnecessary. In this case, you can turn of the
-shell query for compiled routines with the variable
-@code{idlwave-query-shell-for-routine-info}.@refill
+@defopt idlwave-system-directory
+The IDL system directory for Windows and MacOS. Not needed under
+Unix/MacOSX (obtained from the Shell).
+@end defopt
-@defopt idlwave-libinfo-file
-File for routine information of the IDL library.
+@defopt idlwave-config-directory (@file{~/.idlwave})
+Default path where IDLWAVE saves configuration information and any
+user catalog.
@end defopt
-@defopt idlwave-library-path
-IDL library path for Windows and MacOS. Not needed under Unix.
+@menu
+* Library Catalogs::
+* User Catalog::
+@end menu
+
+@ifhtml
+
+@end ifhtml
+@node Library Catalogs, User Catalog, Catalogs, Catalogs
+@appendixsubsec Library Catalogs
+@cindex @file{.idlwave_catalog}
+@cindex Library catalogs
+@cindex @code{idlwave_catalog}
+
+Library catalogs are files named @file{.idlwave_catalog} stored in
+directories containing @code{.pro} routine files. They are discovered
+on the IDL search path and loaded automatically when routine information
+is read. Each catalog file documents the routines found in that
+directory --- one catalog per directory. Every catalog has a library
+name associated with it (e.g. @emph{AstroLib}). This name will be shown
+briefly when the catalog is found, and in the routine info of routines
+it documents.
+
+Many popular libraries of routines are shipped with IDLWAVE catalog
+files by default, and so will be automatically discovered. Library
+catalogs are scanned externally to Emacs using a tool provided with
+IDLWAVE. Each catalog can be re-scanned independently of any other.
+Catalogs can easily be made available system-wide with a common source
+repository, providing uniform routine information, and lifting the
+burden of scanning from the user (who may not even know they're using a
+scanned catalog). Since all catalogs are independent, they can be
+re-scanned automatically to gather updates, e.g. in a @file{cron} job.
+Scanning is much faster than with the built-in user catalog method. One
+minor disadvantage: the entire IDL search path is scanned for catalog
+files every time IDLWAVE starts up, which might be slow over a network.
+
+A Perl tool to create library catalogs is distributed with IDLWAVE:
+@code{idlwave_catalog}. It can be called quite simply:
+@example
+idlwave_catalog MyLib
+@end example
+
+@noindent This would scan all directories recursively beneath the current and
+populate them with @file{.idlwave_catalog} files, tagging the routines
+found with the name library ``MyLib''. The full usage information:
+
+@example
+Usage: idlwave_catalog [-l] [-v] [-d] [-s] [-f] [-h] libname
+ libname - Unique name of the catalog (4 or more alphanumeric
+ characters).
+ -l - Scan local directory only, otherwise recursively
+ catalog all directories at or beneath this one.
+ -v - Print verbose information.
+ -d - Instead of scanning, delete all .idlwave_catalog files
+ here or below.
+ -s - Be silent.
+ -f - Force overwriting any catalogs found with a different
+ library name.
+ -h - Print this usage.
+@end example
+
+To re-load the library catalogs on the IDL path, force a system routine
+info update using a single prefix to @code{idlwave-update-routine-info}:
+@kbd{C-u C-c C-i}.
+
+@defopt idlwave-use-library-catalogs (@code{t})
+Whether to search for and load library catalogs. Only disable if
+performance is a problem and the catalogs are not needed.
@end defopt
+@node User Catalog, , Library Catalogs, Catalogs
+@appendixsubsec User Catalog
+@cindex User catalog
+@cindex IDL library routine info
+@cindex Windows
+@cindex MacOS
+@cindex IDL variable @code{!DIR}
+@cindex @code{!DIR}, IDL variable
+
+The user catalog is the old routine catalog system. It is produced
+within Emacs, and stored in a single file in the user's home directory
+(@file{.idlwave/idlusercat.el} by default). Although library catalogs
+are more flexible, there may be reasons to prefer a user catalog
+instead, including:
+
+@itemize @bullet
+@item The scan is internal to Emacs, so you don't need a working Perl
+installation, as you do for library catalogs.
+@item Can be used to scan directories for which the user has no write
+privileges.
+@item Easy widget-based path selection.
+@end itemize
+
+However, no routine info is available in the user catalog by default;
+the user must actively complete a scan. In addition, this type of
+catalog is all or nothing: if a single routine changes, the entire
+catalog must be rescanned to update it. Creating the user catalog is
+also much slower than scanning library catalogs.
+
+You can scan any of the directories on the currently known path. Under
+Windows and MacOS (not OSX), you need to specify the IDL search path in
+the variable @code{idlwave-library-path}, and the location of the IDL
+directory (the value of the @code{!DIR} system variable) in the variable
+@code{idlwave-system-directory}, like this@footnote{The initial @samp{+}
+leads to recursive expansion of the path, just like in IDL}:
+
+@lisp
+(setq idlwave-library-path
+ '("+c:/RSI/IDL56/lib/" "+c:/user/me/idllibs"))
+(setq idlwave-system-directory "c:/RSI/IDL56/")
+@end lisp
-@node Updating idlw-rinfo.el, , Library Scan, Sources of Routine Info
-@section Updating @file{idlw-rinfo.el}
-@cindex @file{get_rinfo}
+@noindent Under GNU and UNIX, these values will be automatically gathered from
+the IDLWAVE shell.
+
+The command @kbd{M-x idlwave-create-user-catalog-file} (or the menu item
+@samp{IDLWAVE->Routine Info->Select Catalog Directories} can then be
+used to create a user catalog. It brings up a widget in which you can
+select some or all directories on the search path. Directories which
+already contain a library catalog are marked with @samp{[LIB]}, and need
+not be scanned (although there is no harm if you do so, other than the
+additional memory used for the duplication).
+
+After selecting directories, click on the @w{@samp{[Scan & Save]}}
+button in the widget to scan all files in the selected directories and
+write out the resulting routine information. In order to update the
+library information using the directory selection, call the command
+@code{idlwave-update-routine-info} with a double prefix argument:
+@w{@kbd{C-u C-u C-c C-i}}. This will rescan files in the previously
+selected directories, write an updated version of the user catalog file
+and rebuild IDLWAVE's internal lists. If you give three prefix
+arguments @w{@kbd{C-u C-u C-u C-c C-i}}, updating will be done with a
+background job@footnote{Unix systems only, I think.}. You can continue
+to work, and the library catalog will be re-read when it is ready. If
+you find you need to update the user catalog often, you should consider
+building a library catalog for your routines instead (@pxref{Library
+Catalogs}).
+
+@defopt idlwave-special-lib-alist
+Alist of regular expressions matching special library directories for
+labeling in routine-info display.
+@end defopt
+
+@node Load-Path Shadows, Documentation Scan, Catalogs, Sources of Routine Info
+@appendixsec Load-Path Shadows
+@cindex Load-path shadows
+@cindex Shadows, load-path
+@cindex Duplicate routines
+@cindex Multiply defined routines
+@cindex Routine definitions, multiple
+@cindex Application, testing for shadowing
+@cindex Buffer, testing for shadowing
+
+IDLWAVE can compile a list of routines which are (re-)defined in more
+than one file. Since one definition will hide (shadow) the others
+depending on which file is compiled first, such multiple definitions are
+called "load-path shadows". IDLWAVE has several routines to scan for
+load path shadows. The output is placed into the special buffer
+@file{*Shadows*}. The format of the output is identical to the source
+section of the routine info buffer (@pxref{Routine Info}). The
+different definitions of a routine are ordered by @emph{likelihood of
+use}. So the first entry will be most likely the one you'll get if an
+unsuspecting command uses that routine. Before listing shadows, you
+should make sure that routine info is up-to-date by pressing @kbd{C-c
+C-i}. Here are the different routines (also available in the Menu
+@samp{IDLWAVE->Routine Info}):
+
+@table @asis
+@item @kbd{M-x idlwave-list-buffer-load-path-shadows}
+This commands checks the names of all routines defined in the current
+buffer for shadowing conflicts with other routines accessible to
+IDLWAVE. The command also has a key binding: @kbd{C-c C-b}
+@item @kbd{M-x idlwave-list-shell-load-path-shadows}.
+Checks all routines compiled under the shell for shadowing. This is
+very useful when you have written a complete application. Just compile
+the application, use @code{RESOLVE_ALL} to compile any routines used by
+your code, update the routine info inside IDLWAVE with @kbd{C-c C-i} and
+then check for shadowing.
+@item @kbd{M-x idlwave-list-all-load-path-shadows}
+This command checks all routines accessible to IDLWAVE for conflicts.
+@end table
+
+For these commands to work fully you need to scan the entire load path
+in either a user or library catalog. Also, IDLWAVE should be able to
+distinguish between the system library files (normally installed in
+@file{/usr/local/rsi/idl/lib}) and any site specific or user specific
+files. Therefore, such local files should not be installed inside the
+@file{lib} directory of the IDL directory. This is also advisable for
+many other reasons.
+
+@cindex Windows
+@cindex MacOS
+@cindex IDL variable @code{!DIR}
+@cindex @code{!DIR}, IDL variable
+Users of Windows and MacOS also must set the variable
+@code{idlwave-system-directory} to the value of the @code{!DIR} system
+variable in IDL. IDLWAVE appends @file{lib} to the value of this
+variable and assumes that all files found on that path are system
+routines.
+
+Another way to find out if a specific routine has multiple definitions
+on the load path is routine info display (@pxref{Routine Info}).
+
+@node Documentation Scan, , Load-Path Shadows, Sources of Routine Info
+@appendixsec Documentation Scan
+@cindex @file{get_html_rinfo}
@cindex @file{idlw-rinfo.el}
+@cindex Scanning the documentation
@cindex Perl program, to create @file{idlw-rinfo.el}
-The file @file{idlw-rinfo.el} contains the routine information for
-the routines build into IDL. This constant depends upon the version of
-IDL. If you are lucky, the maintainer of IDLWAVE will always have
-access to the newest version of IDL and provide updates of
-@file{idlw-rinfo.el} reflecting the currently released version of
-IDL. The IDLWAVE package also contains a Perl program @file{get_rinfo}
-which constructs this file by scanning selected files from the IDL
-documentation. The program needs @file{pdftotext} by Derek B. Noonburg.
-Instructions on how to use @file{get_rinfo} are in the program
-itself.@refill
-
-@node Configuration Examples, Index, Sources of Routine Info, Top
+IDLWAVE derives its knowledge about system routines from the IDL
+manuals. The file @file{idlw-rinfo.el} contains the routine information
+for the IDL system routines, and links to relevant sections of the HTML
+documentation. The Online Help feature of IDLWAVE requires HTML
+versions of the IDL manuals to be available; the HTML documentation is
+not distributed with IDLWAVE by default, but must be downloaded
+separately from the @uref{@value{IDLWAVE-HOMEPAGE}, the maintainers
+webpage}.
+
+The HTML files and related images can be produced from the
+@file{idl.chm} HTMLHelp file distributed with IDL using the free
+Microsoft HTML Help Workshop. If you are lucky, the maintainer of
+IDLWAVE will always have access to the newest version of IDL and
+provide updates. The IDLWAVE distribution also contains the Perl
+program @file{get_html_rinfo} which constructs the
+@file{idlw-rinfo.el} file by scanning the HTML documents produced from
+the IDL documentation. Instructions on how to use
+@file{get_html_rinfo} are in the program itself.
+
+@node HTML Help Browser Tips, Configuration Examples, Sources of Routine Info, Top
+@appendix HTML Help Browser Tips
+@cindex Browser Tips
+
+There are a wide variety of possible browsers to use for displaying
+the online HTML help available with IDLWAVE (starting with version
+5.0). Since IDLWAVE runs on a many different system types, a single
+browser configuration is not possible, but choices abound.
+
+On many systems, the default browser configured in
+@code{browse-url-browser-function}, and hence inherited by default by
+@code{idlwave-help-browser-function}, is Netscape. Unfortunately, the
+HTML manuals decompiled from the original RSI source contain
+formatting structures which Netscape 4.x does not handle well, though
+they are still readable. A much better choice is Mozilla, or one of
+the Mozilla-derived browsers such as
+@uref{http://galeon.sourceforge.net/,Galeon} (Linux),
+@uref{http://www.mozilla.org/projects/camino/,Camino} (MacOSX), or
+@uref{http://www.mozilla.org/projects/firebird/,Firebird} (all
+platforms). Newer versions of Emacs provide a browser-function choice
+@code{browse-url-gnome-moz} which uses the Gnome-configured browser.
+
+Note that the HTML files decompiled from RSI Microsoft Help sources
+contain specific references to the @samp{Symbol} font, which by default
+is not permitted in normal encodings (it's technically illegal). Though
+it only impacts a few symbols, you can trick Mozilla-based browsers into
+recognizing @samp{Symbol} by following the directions
+@uref{http://hutchinson.belmont.ma.us/tth/Xfonts.html, here}. With this
+fix in place, HTML help pages look almost identical to their PDF
+equivalents (yet can be bookmarked, browsed as history, searched, etc.).
+
+@noindent Individual platform recommendations:
+
+@itemize @bullet
+@item Windows: The native Microsoft HTMLHelp browser is preferred,
+with even better results using the free
+@uref{http://www.keyworks.net/keyhh.htm,@code{KEYHH}} program to
+permit IDL help to be targetted to a single window. To use HTMLHelp,
+specify @code{idlwave-help-use-hh} as @code{'hh} or @code{'keyhh}.
+One bonus: since IDL is shipped with the @file{idl.chm} help file, you
+don't need to download the HTML help package. @xref{Help with HTML
+Documentation}.
+@item Unix/MacOSX: The @uref{http://www.w3m.org,@code{w3m}} browser
+and its associated
+@uref{http://emacs-w3m.namazu.org/,@code{emacs-w3m}} emacs mode
+provide in-buffer browsing with image display, and excellent speed and
+formatting. Both the Emacs mode and the browser itself must be
+downloaded separately. To use this browser, include
+
+@lisp
+(setq idlwave-help-browser-function 'w3m-browse-url)
+@end lisp
+
+in your @file{.emacs}. Setting a few other nice @code{w3m} options
+cuts down on screen clutter:
+
+@lisp
+(setq w3m-use-tab nil
+ w3m-use-header-line nil
+ w3m-use-toolbar nil)
+@end lisp
+
+If you use a dedicated frame for help, you might want to add the
+following, to get consistent behavior with the @kbd{q} key:
+
+@lisp
+;; Close my help window when w3m closes.
+(defadvice w3m-close-window (after idlwave-close activate)
+ (if (boundp 'idlwave-help-frame)
+ (idlwave-help-quit)))
+@end lisp
+
+Note that you can open the file in an external browser from within
+@code{w3m} using @kbd{M}.
+@end itemize
+
+@node Configuration Examples, Windows and MacOS, HTML Help Browser Tips, Top
@appendix Configuration Examples
@cindex Configuration examples
@cindex Example configuration
+@cindex @file{.emacs}
+@cindex Default settings, of options
+@cindex Interview, with the maintainer
@noindent
-@b{Question:} So now you have all these complicated configuration
-options in your package, but which ones do @emph{you} as the maintainer
-actually set in your own configuration?
+@b{Question:} You have all these complicated configuration options in
+your package, but which ones do @emph{you} as the maintainer actually
+set in your own configuration?
@noindent
-@b{Answer:} Hardly any. As the maintainer, I set the default of all
-options to what I think is best. However, I do not turn on features by
-default which
+@b{Answer:} Not many, beyond custom key bindings. I set most defaults
+the way that seems best. However, the default settings do not turn on
+features which:
+
@itemize @minus
@item
-are not self-evident (i.e. too magic) when used by an unsuspecting user
+are not self-evident (i.e. too magic) when used by an unsuspecting user.
+@item
+are too intrusive.
+@item
+will not work properly on all Emacs installations.
@item
-are too intrusive
+break with widely used standards.
@item
-will not work properly on all Emacs installations out there
+use function or other non-standard keys.
@item
-break with what I think are widely used standards.
+are purely personal customizations, like additional key bindings, and
+library names.
@end itemize
-@noindent To see what I mean, here is the entire configuration I have in
-my @file{.emacs}:
+@noindent To see what I mean, here is the @emph{entire} configuration
+the old maintainer had in his @file{.emacs}:
@lisp
-(setq idlwave-shell-activate-alt-keybindings t
- idlwave-expand-generic-end t
+(setq idlwave-shell-debug-modifiers '(control shift)
idlwave-store-inquired-class t
idlwave-shell-automatic-start t
- idlwave-libinfo-file "~/lib/idl/libinfo.el"
- idlwave-main-block-indent 2)
-(add-hook 'idlwave-shell-mode-hook
- (lambda()
- (define-key idlwave-mode-map [(shift button1)]
- 'idlwave-shell-mouse-print)
- (define-key idlwave-mode-map [(shift button2)]
- 'idlwave-shell-mouse-help)))
+ idlwave-main-block-indent 2
+ idlwave-init-rinfo-when-idle-after 2
+ idlwave-help-dir "~/lib/emacs/idlwave"
+ idlwave-special-lib-alist '(("/idl-astro/" . "AstroLib")
+ ("/jhuapl/" . "JHUAPL-Lib")
+ ("/dominik/lib/idl/" . "MyLib")))
@end lisp
However, if you are an Emacs power-user and want IDLWAVE to work
-completely differently, the options allow you to change almost every
-aspect of it. Here is an example of a much more extensive configuration
-of IDLWAVE. To say it again - this is not what I recommend, but the
-user is King!@refill
+completely differently, you can change almost every aspect of it. Here
+is an example of a much more extensive configuration of IDLWAVE. The
+user is King!
@example
;;; Settings for IDLWAVE mode
@@ -1731,36 +3894,68 @@ user is King!@refill
(setq idlwave-hang-indent-regexp ": ") ; Change from "- " for auto-fill
(setq idlwave-show-block nil) ; Turn off blinking to begin
(setq idlwave-abbrev-move t) ; Allow abbrevs to move point
+(setq idlwave-query-class '((method-default . nil) ; No query for method
+ (keyword-default . nil); or keyword completion
+ ("INIT" . t) ; except for these
+ ("CLEANUP" . t)
+ ("SETPROPERTY" .t)
+ ("GETPROPERTY" .t)))
+
+;; Using w3m for help (must install w3m and emacs-w3m)
+(autoload 'w3m-browse-url "w3m" "Interface for w3m on Emacs." t)
+(setq idlwave-help-browser-function 'w3m-browse-url
+ w3m-use-tab nil ; no tabs, location line, or toolbar
+ w3m-use-header-line nil
+ w3m-use-toolbar nil)
+
+;; Close my help window or frame when w3m closes with `q'
+(defadvice w3m-close-window (after idlwave-close activate)
+ (if (boundp 'idlwave-help-frame)
+ (idlwave-help-quit)))
;; Some setting can only be done from a mode hook. Here is an example:
-
(add-hook 'idlwave-mode-hook
(lambda ()
- (setq abbrev-mode 1) ; Turn on abbrevs (-1 for off)
(setq case-fold-search nil) ; Make searches case sensitive
;; Run other functions here
(font-lock-mode 1) ; Turn on font-lock mode
(idlwave-auto-fill-mode 0) ; Turn off auto filling
- ;;
- ;; Pad with with 1 space (if -n is used then make the
+ (setq idlwave-help-browser-function 'browse-url-w3)
+
+ ;; Pad with 1 space (if -n is used then make the
;; padding a minimum of n spaces.) The defaults use -1
;; instead of 1.
(idlwave-action-and-binding "=" '(idlwave-expand-equal 1 1))
(idlwave-action-and-binding "<" '(idlwave-surround 1 1))
(idlwave-action-and-binding ">" '(idlwave-surround 1 1 '(?-)))
(idlwave-action-and-binding "&" '(idlwave-surround 1 1))
- ;;
+
;; Only pad after comma and with exactly 1 space
(idlwave-action-and-binding "," '(idlwave-surround nil 1))
- ;;
+ (idlwave-action-and-binding "&" '(idlwave-surround 1 1))
+
+ ;; Pad only after `->', remove any space before the arrow
+ (idlwave-action-and-binding "->" '(idlwave-surround 0 -1 nil 2))
+
;; Set some personal bindings
;; (In this case, makes `,' have the normal self-insert behavior.)
(local-set-key "," 'self-insert-command)
+ (local-set-key [f5] 'idlwave-shell-break-here)
+ (local-set-key [f6] 'idlwave-shell-clear-current-bp)
+
;; Create a newline, indenting the original and new line.
;; A similar function that does _not_ reindent the original
;; line is on "\C-j" (The default for emacs programming modes).
(local-set-key "\n" 'idlwave-newline)
;; (local-set-key "\C-j" 'idlwave-newline) ; My preference.
+
+ ;; Some personal abbreviations
+ (define-abbrev idlwave-mode-abbrev-table
+ (concat idlwave-abbrev-start-char "wb") "widget_base()"
+ (idlwave-keyword-abbrev 1))
+ (define-abbrev idlwave-mode-abbrev-table
+ (concat idlwave-abbrev-start-char "on") "obj_new()"
+ (idlwave-keyword-abbrev 1))
))
;;; Settings for IDLWAVE SHELL mode
@@ -1770,15 +3965,279 @@ user is King!@refill
(setq idlwave-shell-prompt-pattern "^WAVE> ") ; default is "^IDL> "
(setq idlwave-shell-explicit-file-name "wave")
(setq idlwave-shell-process-name "wave")
-(setq idlwave-shell-use-dedicated-frame t) ; Shell on separate frame
(setq idlwave-shell-use-toolbar nil) ; No toolbar
+
+;; Most shell interaction settings can be done from the shell-mode-hook.
+(add-hook 'idlwave-shell-mode-hook
+ (lambda ()
+ ;; Set up some custom key and mouse examine commands
+ (idlwave-shell-define-key-both [s-down-mouse-2]
+ (idlwave-shell-mouse-examine
+ "print, size(___,/DIMENSIONS)"))
+ (idlwave-shell-define-key-both [f9] (idlwave-shell-examine
+ "print, size(___,/DIMENSIONS)"))
+ (idlwave-shell-define-key-both [f10] (idlwave-shell-examine
+ "print,size(___,/TNAME)"))
+ (idlwave-shell-define-key-both [f11] (idlwave-shell-examine
+ "help,___,/STRUCTURE"))))
+@end example
+
+@ifhtml
+
+@end ifhtml
+@node Windows and MacOS, Troubleshooting, Configuration Examples, Top
+@appendix Windows and MacOS
+@cindex Windows
+@cindex MacOS
+@cindex MacOSX
+
+IDLWAVE was developed on a UNIX system. However, thanks to the
+portability of Emacs, much of IDLWAVE does also work under different
+operating systems like Windows (with NTEmacs or NTXEmacs) or MacOS.
+
+The only real problem is that RSI does not provide a command-line
+version of IDL for Windows or MacOS(<=9) with which IDLWAVE can
+interact@footnote{Call your RSI representative and complain --- it
+should be trivial for them to provide one. And if enough people ask for
+it, maybe they will. The new MacOSX version of IDL @emph{does} have a
+shell and works well with IDLWAVE.}. As a result, the IDLWAVE Shell
+does not work and you have to rely on IDLDE to run and debug your
+programs. However, editing IDL source files with Emacs/IDLWAVE works
+with all bells and whistles, including routine info, completion and fast
+online help. Only a small amount of additional information must be
+specified in your @file{.emacs} file: the path names which, on a UNIX
+system, are automatically gathered by talking to the IDL program.
+
+Here is an example of the additional configuration needed for a Windows
+system. I am assuming that IDLWAVE has been installed in
+@w{@samp{C:\Program Files\IDLWAVE}} and that IDL is installed in
+@w{@samp{C:\RSI\IDL55}}.
+
+@lisp
+;; location of the lisp files (needed if IDLWAVE is not part of
+;; the X/Emacs installation)
+(setq load-path (cons "c:/program files/IDLWAVE" load-path))
+
+;; The location of the IDL library files, both from RSI and your own.
+;; note that the initial "+" expands the path recursively
+(setq idlwave-library-path
+ '("+c:/RSI/IDL55/lib/" "+c:/user/me/idllibs" ))
+
+;; location of the IDL system directory (try "print,!DIR")
+(setq idlwave-system-directory "c:/RSI/IDL55/")
+
+;; specify using the HTMLHelp documentation for online help, with the
+;; KEYHH helper routine (Windows only)
+(setq idlwave-use-hh 'keyhh)
+
+;; file in which to store the user catalog info
+(setq idlwave-user-catalog-file "c:/IDLWAVE/idlcat.el")
+@end lisp
+
+@noindent Furthermore, Windows sometimes tries to outsmart you --- make
+sure you check the following things:
+
+@itemize @bullet
+@item When you download the IDLWAVE distribution, make sure you save the
+file under the names @file{idlwave.tar.gz}.
+@item M-TAB switches among running programs --- use Esc-TAB
+instead.
+@item Other issues as yet unnamed...
+@end itemize
+
+Windows users who'd like to make use of IDLWAVE's context-aware HTML
+help can skip the browser and use the HTMLHelp functionality directly.
+@xref{Help with HTML Documentation}.
+
+@ifhtml
+
+@end ifhtml
+@node Troubleshooting, Index, Windows and MacOS, Top
+@appendix Troubleshooting
+@cindex Troubleshooting
+
+Although IDLWAVE usually installs and works without difficulty, a few
+common problems and their solutions are documented below.
+
+@enumerate
+
+@item @strong{Whenever an IDL error occurs or a breakpoint is hit, I get
+errors or strange behavior when I try to type anything into some of my
+IDLWAVE buffers.}
+
+This is a @emph{feature}, not an error. You're in @emph{Electric
+Debug Mode} (@pxref{Electric Debug Mode}). You should see
+@code{*Debugging*} in the mode-line. The buffer is read-only and all
+debugging and examination commands are available as single keystrokes;
+@kbd{C-?} lists these shortcuts. Use @kbd{q} to quit the mode, and
+customize the variable @code{idlwave-shell-automatic-electric-debug}
+if you prefer not to enter electric debug on breakpoints@dots{} but
+you really should try it before you disable it! You can also
+customize this variable to enter debug mode when errors are
+encountered too.
+
+@item @strong{I get errors like @samp{Searching for program: no such
+file or directory, idl} when attempting to start the IDL shell.}
+
+IDLWAVE needs to know where IDL is in order to run it as a process.
+By default, it attempts to invoke it simply as @samp{idl}, which
+presumes such an executable is on your search path. You need to
+ensure @samp{idl} is on your @samp{$PATH}, or specify the full
+pathname to the idl program with the variable
+@code{idlwave-shell-explicit-file-name}. Note that you may need to
+set your shell search path in two places when running Emacs as an Aqua
+application with MacOSX; see the next topic.
+
+@item @strong{IDLWAVE is disregarding my @samp{IDL_PATH} which I set
+under MacOSX}
+
+If you run Emacs directly as an Aqua application, rather than from the
+console shell, the environment is set not from your usual shell
+configuration files (e.g. @file{.cshrc}), but from the file
+@file{~/.MacOSX/environment.plist}. Either include your path settings
+there, or start Emacs and IDLWAVE from the shell.
+
+@item @strong{I get errors like @samp{Symbol's function is void:
+overlayp} when trying to start the shell in XEmacs}
+
+You don't have the @samp{fsf-compat} package installed, which IDLWAVE
+needs to run under XEmacs. Install it and, if necessary, insert
+@code{(require 'overlay)} in your @file{.emacs}.
+
+@item @strong{I'm getting errors like @samp{Symbol's value as variable is void:
+cl-builtin-gethash} on completion or routine info.}
+
+This error arises if you upgraded Emacs from 20.x to 21.x without
+re-installing IDLWAVE. Old Emacs and new Emacs are not byte-compatible
+in compiled lisp files. Presumably, you kept the original .elc files in
+place, and this is the source of the error. If you recompile (or just
+"make; make install") from source, it should resolve this problem.
+Another option is to recompile the @file{idlw*.el} files by hand using
+@kbd{M-x byte-compile-file}. Why not take the opportunity to grab the
+latest IDLWAVE version at @uref{@value{IDLWAVE-HOMEPAGE}, the
+maintainers webpage}
+
+@item @strong{@kbd{M-@key{TAB}} doesn't complete words, it switches
+windows on my desktop.}
+
+Your system is trapping @kbd{M-@key{TAB}} and using it for its own
+nefarious purposes: Emacs never sees the keystrokes. On many Unix
+systems, you can reconfigure your window manager to use another key
+sequence for switching among windows. Another option is to use the
+equivalent sequence @kbd{@key{ESC}-@key{TAB}}.
+
+@item @strong{When stopping at breakpoints or errors, IDLWAVE does not
+seem to highlight the relevant line in the source.}
+
+IDLWAVE scans for error and halt messages and highlights the stop
+location in the correct file. However, if you've changed the system
+variable @samp{!ERROR_STATE.MSG_PREFIX}, it is unable to parse these
+message correctly. Don't do that.
+
+@item @strong{IDLWAVE doesn't work correctly when using ENVI.}
+
+Though IDLWAVE was not written with ENVI in mind, it works just fine
+with it, as long as you update the prompt it's looking for (@samp{IDL>
+} by default). You can do this with the variable
+@code{idlwave-shell-prompt-pattern} (@pxref{Starting the Shell}), e.g.,
+in your @file{.emacs}:
+
+@lisp
+(setq idlwave-shell-prompt-pattern "^\\(ENVI\\|IDL\\)> ")
+@end lisp
+
+@item @strong{Attempts to set breakpoints fail: no breakpoint is
+indicated in the IDLWAVE buffer.}
+
+IDL changed its breakpoint reporting format starting with IDLv5.5. The
+first version of IDLWAVE to support the new format is IDLWAVE v4.10. If
+you have an older version and are using IDL >v5.5, you need to upgrade,
+and/or make sure your recent version of IDLWAVE is being found on the
+Emacs load-path (see the next entry). You can list the version being
+used with @kbd{C-h v idlwave-mode-version @key{RET}}.
+
+@item @strong{I installed a new version of IDLWAVE, but the old
+version is still being used} or @strong{IDLWAVE works, but when I
+tried to install the optional modules @file{idlw-roprompt.el} or
+@file{idlw-complete-structtag}, I get errors like @samp{Cannot open
+load file}}.
+
+The problem is that your Emacs is not finding the version of IDLWAVE you
+installed. Many Emacsen come with an older bundled copy of IDLWAVE
+(e.g. v4.7 for Emacs 21.x), which is likely what's being used instead.
+You need to make sure your Emacs @emph{load-path} contains the directory
+where IDLWAVE is installed (@file{/usr/local/share/emacs/site-lisp}, by
+default), @emph{before} Emacs' default search directories. You can
+accomplish this by putting the following in your @file{.emacs}:
+
+@lisp
+(setq load-path (cons "/usr/local/share/emacs/site-lisp" load-path))
+@end lisp
+
+@noindent You can check on your load-path value using @kbd{C-h v
+load-path @key{RET}}.
+
+@item @strong{IDLWAVE is screwing up the formatting of my @file{.idl} files.}
+
+Actually, this isn't IDLWAVE at all, but @samp{idl-mode}, an unrelated
+programming mode for CORBA's Interface Definition Language (you should
+see @samp{(IDL)}, not @samp{(IDLWAVE)} in the mode-line). One
+solution: don't name your file @file{.idl}, but rather @file{.pro}.
+Another solution: make sure @file{.idl} files load IDLWAVE instead of
+@samp{idl-mode} by adding the following to your @file{.emacs}:
+
+@lisp
+(setcdr (rassoc 'idl-mode auto-mode-alist) 'idlwave-mode)
+@end lisp
+
+@item @strong{The routine info for my local routines is out of date!}
+
+IDLWAVE collects routine info from various locations (@pxref{Routine
+Information Sources}). Routines in files visited in a buffer or
+compiled in the shell should be up to date. For other routines, the
+information is only as current as the most recent scan. If you have a
+rapidly changing set of routines, and you'd like the latest routine
+information to be available for it, one powerful technique makes use of
+the library catalog tool, @samp{idlwave_catalog}. Simply add a line to
+your @samp{cron} file (@samp{crontab -e} will let you edit this on some
+systems), like this:
+
+@example
+45 3 * * 1-5 (cd /path/to/myidllib; /path/to/idlwave_catalog MyLib)
@end example
-@node Index, , Configuration Examples, Top
+@noindent where @samp{MyLib} is the name of your library. This will
+rescan all @file{.pro} files at or below @file{/path/to/myidllib} every
+week night at 3:45am. You can even scan site-wide libraries with this
+method, and the most recent information will be available to all users.
+
+@item @strong{All the Greek-font characters in the HTML help are
+displayed as Latin characters!}
+
+Unfortunately, the HTMLHelp files RSI provides attempt to switch to
+@samp{Symbol} font to display Greek characters, which is not really an
+permitted method for doing this in HTML. There is a "workaround" for
+many browsers: @xref{HTML Help Browser Tips}.
+
+@item @strong{In the shell, my long commands are truncated at 256 characters!}
+
+This actually happens when running IDL in an XTerm as well. There are
+a couple of work arounds: @code{define_key,/control,'^d'} (e.g. in
+your @file{$IDL_STARTUP} file) will disable the @samp{EOF} character
+and give you a 512 character limit. You won't be able to use
+@key{C-d} to quit the shell, however. Another possibility is
+@code{!EDIT_INPUT=0}, which gives you an @emph{infinite} limit (OK, a
+memory-bounded limit), but disables the processing of background
+widget events (those with @code{/NO_BLOCK} passed to @code{XManager}).
+
+@end enumerate
+
+@node Index, , Troubleshooting, Top
@unnumbered Index
@printindex cp
-@summarycontents
-@contents
@bye
+@ignore
+ arch-tag: f1d73958-1423-4127-b8aa-f7b953d64492
+@end ignore