X-Git-Url: https://code.delx.au/gnu-emacs/blobdiff_plain/c56516d57a434ab6c27da319f3ae308534e301fb..d05c87ac11567ca289e758759cb9c903ee7f113a:/Makefile.in diff --git a/Makefile.in b/Makefile.in index 7dbf977ece..d46b0a9f6c 100644 --- a/Makefile.in +++ b/Makefile.in @@ -4,10 +4,6 @@ # make all to compile and build Emacs. # make install to install it. -# make install.sysv to install on system V. Note that on system V you -# must change mandir to /usr/local/man/man1. -# make install.xenix to install on Xenix. -# make install.aix to install on AIX. # make TAGS to update tags tables. # # make clean or make mostlyclean @@ -26,7 +22,7 @@ # `make distclean' should leave only the files that were in the # distribution. # -# make realclean +# make maintainer-clean # Delete everything from the current directory that can be # reconstructed with this Makefile. This typically includes # everything deleted by distclean, plus more: C source files @@ -36,235 +32,243 @@ # Still more severe - delete backup and autosave files, too. SHELL = /bin/sh -MAKE = make # BSD doesn't have it as a default. + +# If Make doesn't predefine MAKE, set it here. +@SET_MAKE@ # ==================== Things `configure' Might Edit ==================== -CC=cc -CONFIG_CFLAGS=-g +CC=@CC@ +CPP=@CPP@ +C_SWITCH_SYSTEM=@c_switch_system@ +ALLOCA=@ALLOCA@ +LN_S=@LN_S@ +CFLAGS=@CFLAGS@ +LDFLAGS=@LDFLAGS@ +CPPFLAGS=@CPPFLAGS@ +C_SWITCH_X_SITE=@C_SWITCH_X_SITE@ +LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@ +YACC=@YACC@ ### These help us choose version- and architecture-specific directories ### to install files in. ### This should be the number of the Emacs version we're building, ### like `18.59' or `19.0'. -version=version-not-set +version=@version@ ### This should be the name of the configuration we're building Emacs ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'. -configname=configuration-name-not-set +configuration=@configuration@ # ==================== Where To Install Things ==================== # The default location for installation. Everything is placed in # subdirectories of this directory. The default values for many of # the variables below are expressed in terms of this one, so you may -# not need to change them. -prefix=/usr/local +# not need to change them. This defaults to /usr/local. +prefix=@prefix@ # Like `prefix', but used for architecture-specific files. -exec_prefix=${prefix} +exec_prefix=@exec_prefix@ # Where to install Emacs and other binaries that people will want to # run directly (like etags). -bindir=${exec_prefix}/bin +bindir=@bindir@ # Where to install architecture-independent data files. ${lispdir} # and ${etcdir} are subdirectories of this. -datadir=${prefix}/lib +datadir=@datadir@ # Where to install and expect the files that Emacs modifies as it -# runs. These files are all architecture-independent. Right now, the -# only such data is the locking directory; ${lockdir} is a -# subdirectory of this. -statedir=${prefix}/lib +# runs. These files are all architecture-independent. +# Right now, this is not used. +sharedstatedir=@sharedstatedir@ # Where to install and expect executable files to be run by Emacs # rather than directly by users, and other architecture-dependent # data. ${archlibdir} is a subdirectory of this. -libdir=${exec_prefix}/lib +libexecdir=@libexecdir@ # Where to install Emacs's man pages, and what extension they should have. -mandir=${prefix}/man/man1 +mandir=@mandir@ manext=.1 +man1dir=$(mandir)/man1 # Where to install and expect the info files describing Emacs. In the # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but # since there are now many packages documented with the texinfo # system, it is inappropriate to imply that it is part of Emacs. -infodir=${prefix}/info +infodir=@infodir@ + +# Where to look for bitmap files. +bitmapdir=@bitmapdir@ -# Where to find the source code - setting this to anything but -# . doesn't work yet. The source code for Emacs's C kernel is +# Where to find the source code. The source code for Emacs's C kernel is # expected to be in ${srcdir}/src, and the source code for Emacs's # utility programs is expected to be in ${srcdir}/lib-src. This is # set by the configure script's `--srcdir' option. -srcdir=. + +# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH. +srcdir=@srcdir@ + +# Tell make where to find source files; this is needed for the makefiles. +VPATH=@srcdir@ + +# Where to find the application default. +x_default_search_path=@x_default_search_path@ # ==================== Emacs-specific directories ==================== # These variables hold the values Emacs will actually use. They are # based on the values of the standard Make variables above. -# Where to install the elisp files distributed with Emacs. This -# includes the Emacs version, so that the lisp files for different -# versions of Emacs will install themselves in separate directories. -lispdir=${datadir}/emacs/${version}/lisp - -# Where to install the elisp files which are distributed with Emacs -# but not maintained by the FSF. This includes the Emacs version, so -# that the lisp files for different versions of Emacs will install +# Where to install the lisp files distributed with +# Emacs. This includes the Emacs version, so that the +# lisp files for different versions of Emacs will install # themselves in separate directories. -externallispdir=${datadir}/emacs/${version}/external-lisp - -# Directories Emacs should search for elisp files specific to this -# site (i.e. customizations), before consulting ${lispdir}. This -# should be a colon-separated list of directories. -locallisppath=${datadir}/emacs/site-lisp +lispdir=@lispdir@ -# Where Emacs will search to find its elisp files. Before changing -# this, check to see if your purpose wouldn't better be served by -# changing locallisppath. This should be a colon-separated list of +# Directories Emacs should search for lisp files specific +# to this site (i.e. customizations), before consulting +# ${lispdir}. This should be a colon-separated list of # directories. -lisppath=${locallisppath}:${lispdir} - -# Where Emacs will search for its elisp files while building. This is -# only used during the process of compiling Emacs, to help Emacs find -# its lisp files before they've been installed in their final -# location. It's usually identical to lisppath, except that the entry -# for the directory containing the installed lisp files has been -# replaced with ../lisp. This should be a colon-separated list of -# directories. -buildlisppath=../lisp - -# Where to install the other architecture-independent data files -# distributed with Emacs (like the tutorial, the cookie recipes and -# the Zippy database). This path usually contains the Emacs version -# number, so the data files for multiple versions of Emacs may be -# installed at once. -etcdir=${datadir}/emacs/${version}/etc +locallisppath=@locallisppath@ -# Where to create and expect the locking directory, where the Emacs -# locking code keeps track of which files are currently being edited. -lockdir=${statedir}/emacs/lock - -# Where to put executables to be run by Emacs rather than the user. -# This path usually includes the Emacs version and configuration name, -# so that multiple configurations for multiple versions of Emacs may -# be installed at once. -archlibdir=${libdir}/emacs/${version}/${configname} +# Where Emacs will search to find its lisp files. Before +# changing this, check to see if your purpose wouldn't +# better be served by changing locallisppath. This +# should be a colon-separated list of directories. +lisppath=@lisppath@ + +# Where Emacs will search for its lisp files while +# building. This is only used during the process of +# compiling Emacs, to help Emacs find its lisp files +# before they've been installed in their final location. +# It's usually identical to lisppath, except that +# it does not include locallisppath, and the +# entry for the directory containing the installed lisp +# files has been replaced with ../lisp. This should be a +# colon-separated list of directories. +buildlisppath=${srcdir}/lisp + +# Where to install the other architecture-independent +# data files distributed with Emacs (like the tutorial, +# the cookie recipes and the Zippy database). This path +# usually contains the Emacs version number, so the data +# files for multiple versions of Emacs may be installed +# at once. +etcdir=@etcdir@ + +# Where to put executables to be run by Emacs rather than +# the user. This path usually includes the Emacs version +# and configuration name, so that multiple configurations +# for multiple versions of Emacs may be installed at +# once. +archlibdir=@archlibdir@ + +# Where to put the docstring file. +docdir=@docdir@ # ==================== Utility Programs for the Build ==================== # Allow the user to specify the install program. -INSTALL = install -INSTALLFLAGS = -c -INSTALL_PROGRAM = ${INSTALL} -INSTALL_DATA = ${INSTALL} +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_INFO = install-info +# By default, we uphold the dignity of our programs. +INSTALL_STRIP = # ============================= Targets ============================== -# Flags passed down to subdirectory makefiles. -MFLAGS = - -CFLAGS=${CONFIG_CFLAGS} +# What emacs should be called when installed. +EMACS = emacs # Subdirectories to make recursively. `lisp' is not included # because the compiled lisp files are part of the distribution # and you cannot remake them without installing Emacs first. -SUBDIR = lib-src src +SUBDIR = lib-src src leim # The makefiles of the directories in $SUBDIR. -SUBDIR_MAKEFILES = lib-src/Makefile src/Makefile +SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile # Subdirectories to install, and where they'll go. # lib-src's makefile knows how to install it, so we don't do that here. +# leim's makefile also knows how to install it, so we don't do that here. # When installing the info files, we need to do special things to # avoid nuking an existing dir file, so we don't do that here; # instead, we have written out explicit code in the `install' targets. -COPYDIR = etc ${srcdir}/lisp ${srcdir}/external-lisp -COPYDESTS = ${etcdir} ${lispdir} ${externallispdir} - -all: src/paths.h ${SUBDIR} - -removenullpaths=sed -e 's/^://' -e 's/:$$//' -e 's/::/:/' - -# We force the rebuilding of src/paths.h because the user might give -# make different values for the various directories. Since we use -# move-if-change, src/paths.h only actually changes if the user did -# something notable, so the only unnecessary work we do is in building -# src/paths.h.tmp, which isn't much. -# Note that sed is not in /bin on 386bsd. -src/paths.h: Makefile ${srcdir}/src/paths.h.in FRC - lisppath=`echo ${lisppath} | ${removenullpaths}` ; \ - buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \ - sed < ${srcdir}/src/paths.h.in > src/paths.h.tmp \ - -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \ - -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \ - -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \ - -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \ - -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";' - ${srcdir}/move-if-change src/paths.h.tmp src/paths.h - -src: lib-src +COPYDIR = ${srcdir}/etc ${srcdir}/lisp +COPYDESTS = ${etcdir} ${lispdir} + +all: ${SUBDIR} + +removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g' + +# Generate epaths.h from epaths.in. This target is invoked by `configure'. +epaths-force: FRC + @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \ + buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \ + x_default_search_path=`echo ${x_default_search_path}`; \ + sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \ + -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \ + -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \ + -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \ + -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \ + -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \ + -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \ + -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \ + -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \ + ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h + +# For parallel make, src should be build before leim. +leim: src + +src: lib-src FRC + +lib-src: FRC src/config.stamp .RECURSIVE: ${SUBDIR} ${SUBDIR}: ${SUBDIR_MAKEFILES} FRC - cd $@; $(MAKE) all ${MFLAGS} \ - CC='${CC}' CONFIG_CFLAGS='${CONFIG_CFLAGS}' \ - srcdir='${srcdir}/$@' libdir='${libdir}' - -## We build the makefiles for the subdirectories here so that we can -## edit the values for the path variables into them. This means that -## when the user has built them from this makefile once, they will use -## the right default values for the path variables. -lib-src/Makefile: ${srcdir}/lib-src/Makefile.in Makefile - echo "Producing \`lib-src/Makefile' from \`${srcdir}/lib-src/Makefile.in'." - rm -f lib-src/Makefile.tmp - (echo "# This file is generated from \`${srcdir}/lib-src/Makefile.in'." ; \ - echo "# If you are thinking about editing it, you should seriously consider" ; \ - echo "# running \`make lib-src/Makefile' at the top of the" ; \ - echo "# Emacs build tree instead, or editing" ; \ - echo "# \`${srcdir}/lib-src/Makefile.in' itself." ; \ - /bin/sed < ${srcdir}/lib-src/Makefile.in \ - -e 's|^\(version *=\).*$$|\1'"${version}"'|' \ - -e 's|^\(configname *=\).*$$|\1'"${configname}"'|' \ - -e 's|^\(prefix *=\).*$$|\1'"${prefix}"'|' \ - -e 's|^\(exec_prefix *=\).*$$|\1'"${exec_prefix}"'|' \ - -e 's|^\(libdir *=\).*$$|\1'"${libdir}"'|' \ - -e 's|^\(srcdir *=\).*$$|\1'"${srcdir}"'|' \ - -e 's|^\(archlibdir *=\).*$$|\1'"${archlibdir}"'|' \ - -e 's|^CC *=.*$$|CC='"${CC}"'|' \ - -e 's|^CONFIG_CFLAGS *=.*$$|CONFIG_CFLAGS='"${CONFIG_CFLAGS}"'|' \ - -e 's|^LOADLIBES *=.*$$|LOADLIBES='"${libsrc_libs}"'|' \ - -e '/^# DIST: /d') > lib-src/Makefile.tmp - ${srcdir}/move-if-change lib-src/Makefile.tmp lib-src/Makefile - chmod -w lib-src/Makefile - -src/Makefile: ${srcdir}/src/Makefile.in Makefile - echo "Producing \`src/Makefile' from \`${srcdir}/src/Makefile.in'." - rm -f src/Makefile.tmp - (echo "# This file is generated from \`${srcdir}/src/Makefile.in'." ; \ - echo "# If you are thinking about editing it, you should seriously consider" ; \ - echo "# running \`make src/Makefile' at the top of the" ; \ - echo "# Emacs build tree instead, or editing" ; \ - echo "# \`${srcdir}/src/Makefile.in' itself." ; \ - /bin/sed < ${srcdir}/src/Makefile.in \ - -e 's|^\(srcdir *=\).*$$|\1'"${srcdir}"'|' \ - -e 's|^CC *=.*$$|CC='"${CC}"'|' \ - -e 's|^CONFIG_CFLAGS *=.*$$|CONFIG_CFLAGS='"${CONFIG_CFLAGS}"'|' \ - -e '/^# DIST: /d') > src/Makefile.tmp - ${srcdir}/move-if-change src/Makefile.tmp src/Makefile - chmod -w src/Makefile - -oldXMenu/Makefile: ${srcdir}/oldXMenu/Makefile Makefile - echo "Producing \`src/Makefile' from \`${srcdir}/src/Makefile.in'." - rm -f src/Makefile.tmp - cp "${srcdir}"/oldXMenu/Makefile oldXMenu/Makefile - - -Makefile: + cd $@; $(MAKE) all $(MFLAGS) \ + CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ + LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' + +blessmail: ${SUBDIR_MAKEFILES} src FRC + cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \ + MAKE='${MAKE}' archlibdir='$(archlibdir)' + +Makefile: $(srcdir)/Makefile.in config.status + ./config.status + +config.status: ${srcdir}/configure + ./config.status --recheck + +${srcdir}/configure: configure.in aclocal.m4 + cd ${srcdir} && autoconf + +src/Makefile: $(srcdir)/src/Makefile.in config.status + ./config.status + +src/config.stamp: $(srcdir)/src/config.in config.status + ./config.status + touch src/config.stamp + +lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status + ./config.status + +man/Makefile: $(srcdir)/man/Makefile.in config.status + ./config.status + +oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status + ./config.status + +lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status + ./config.status + +leim/Makefile: $(srcdir)/leim/Makefile.in config.status ./config.status # ==================== Installation ==================== @@ -272,217 +276,368 @@ Makefile: ## If we let lib-src do its own installation, that means we ## don't have to duplicate the list of utilities to install in ## this Makefile as well. -install: all mkdir - (cd lib-src; $(MAKE) install ${MFLAGS} bindir=${bindir} libdir=${libdir}) - -set ${COPYDESTS} ; \ - for dir in ${COPYDIR} ; do \ - dest=$$1 ; shift ; \ - if [ `(cd $${dir}; /bin/pwd)` != `(cd $${dest}; /bin/pwd)` ]; then \ - (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xf - ) ; \ - for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ - rm -rf $${subdir}/RCS ; \ - rm -rf $${subdir}/CVS ; \ - rm -f $${subdir}/\#* ; \ - rm -f $${subdir}/*~ ; \ - done ; \ - fi ; \ - done - -(cd info ; \ - if [ ! -f ${infodir}/dir ]; then \ - ${INSTALL_DATA} ${INSTALLFLAGS} -m 444 ./dir ${infodir}/dir ; \ - fi ; \ - if [ "`echo *.info*`" != "*.info*" ]; then \ - for f in *.info* ; do \ - ${INSTALL_DATA} ${INSTALLFLAGS} -m 444 $$f ${infodir}/$$f ; \ - done ; \ - fi) - for page in emacs etags ctags ; do \ - ${INSTALL_DATA} ${INSTALLFLAGS} -m 444 etc/$${page}.1 \ - ${mandir}/$${page}${manext} ; \ + +## On AIX, use tar xBf. +## On Xenix, use tar xpf. + +.PHONY: install mkdir + +## We delete each directory in ${COPYDESTS} before we copy into it; +## that way, we can reinstall over directories that have been put in +## place with their files read-only (perhaps because they are checked +## into RCS). In order to make this safe, we make sure that the +## source exists and is distinct from the destination. +### We do install-arch-indep first because +### the executable needs the Lisp files and DOC file to work properly. +install: all install-arch-indep install-arch-dep install-leim blessmail + @true + +### Install the executables that were compiled specifically for this machine. +### It would be nice to do something for a parallel make +### to ensure that install-arch-indep finishes before this starts. +install-arch-dep: mkdir + (cd lib-src; \ + $(MAKE) install $(MFLAGS) prefix=${prefix} \ + exec_prefix=${exec_prefix} bindir=${bindir} \ + libexecdir=${libexecdir} archlibdir=${archlibdir} \ + INSTALL_STRIP=${INSTALL_STRIP}) + ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs ${bindir}/emacs-${version} + -chmod 1755 ${bindir}/emacs-${version} + rm -f ${bindir}/$(EMACS) + -ln ${bindir}/emacs-${version} ${bindir}/$(EMACS) + -unset CDPATH; \ + for f in `cd lib-src && echo fns-*.el`; do \ + if test -r lib-src/$$f ; then \ + ${INSTALL_DATA} lib-src/$$f ${archlibdir}/$$f; \ + else true; fi ; \ done - ${INSTALL_PROGRAM} ${INSTALLFLAGS} -m 1755 src/emacs \ - ${bindir}/emacs-${version} - -rm -f ${bindir}/emacs - ln ${bindir}/emacs-${version} ${bindir}/emacs -## If we let lib-src do its own installation, that means we -## don't have to duplicate the list of utilities to install in -## this Makefile as well. -install.sysv: all mkdir - (cd lib-src; $(MAKE) install ${MFLAGS} bindir=${bindir} libdir=${libdir}) +### Install the files that are machine-independent. +### Most of them come straight from the distribution; +### the exception is the DOC-* files, which are copied +## from the build directory. + +## Note that we copy DOC* and then delete DOC +## as a workaround for a bug in tar on Ultrix 4.2. +install-arch-indep: mkdir info -set ${COPYDESTS} ; \ - for dir in ${COPYDIR} ; do \ - dest=$$1 ; shift ; \ - if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \ - (cd $${dir}; find . -print | cpio -pdum ${dest} ) ; \ - for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ - rm -rf $${subdir}/RCS ; \ - rm -rf $${subdir}/CVS ; \ - rm -f $${subdir}/\#* ; \ - rm -f $${subdir}/*~ ; \ - done ; \ - fi ; \ - done - -(cd info ; \ - if [ ! -f ${infodir}/dir ]; then \ - cpset ./dir ${infodir} 444 bin bin ; \ + unset CDPATH; \ + for dir in ${COPYDIR} ; do \ + if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \ + rm -rf $$1 ; \ fi ; \ - if [ "`echo *.info*`" != "*.info*" ]; then \ - for f in *.info* ; do \ - cpset $$f ${infodir} 444 bin bin ; \ - done ; \ - fi) - -for page in emacs etags ctags ; do \ - cpset etc/$${page}.1 ${mandir}/$${page}${manext} 444 bin bin ; \ + shift ; \ done - -/bin/rm -f ${bindir}/emacs - -cpset src/emacs ${bindir}/emacs-${version} 1755 bin bin - -ln ${bindir}/emacs-${version} ${bindir}/emacs - -## If we let lib-src do its own installation, that means we -## don't have to duplicate the list of utilities to install in -## this Makefile as well. -install.xenix: all mkdir - (cd lib-src; $(MAKE) install ${MFLAGS} bindir=${bindir} libdir=${libdir}) -set ${COPYDESTS} ; \ - for dir in ${COPYDIR} ; do \ - dest=$$1 ; shift ; \ - if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \ - (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xpf - ) ; \ - for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ - rm -rf $${subdir}/RCS ; \ - rm -rf $${subdir}/CVS ; \ - rm -f $${subdir}/\#* ; \ - rm -f $${subdir}/*~ ; \ - done ; \ - fi ; \ - done - -(cd info ; \ - if [ ! -f ${infodir}/dir ]; then \ - cp ./dir ${infodir} ; \ - chmod 444 ${infodir}/dir ; \ - fi ; \ - if [ "`echo *.info*`" != "*.info*" ]; then \ - for f in *.info* ; do \ - cp $$f ${infodir} ; \ - chmod 444 ${infodir}/$$f ; \ - done ; \ - fi) - for page in emacs etags ctags ; do \ - cp etc/$${page}.1 ${mandir}/$${page}${manext} ; \ - chmod 444 ${mandir}/$${page}${manext} ; \ + mkdir ${COPYDESTS} ; \ + chmod ugo+rx ${COPYDESTS} ; \ + unset CDPATH; \ + for dir in ${COPYDIR} ; do \ + dest=$$1 ; shift ; \ + [ -d $${dir} ] \ + && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \ + && (echo "Copying $${dir} to $${dest}..." ; \ + (cd $${dir}; tar -cf - . ) \ + |(cd $${dest};umask 022; tar -xvf - && cat > /dev/null); \ + for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \ + chmod a+rx $${subdir} ; \ + rm -rf $${subdir}/RCS ; \ + rm -rf $${subdir}/CVS ; \ + rm -f $${subdir}/\#* ; \ + rm -f $${subdir}/.\#* ; \ + rm -f $${subdir}/*~ ; \ + rm -f $${subdir}/*.orig ; \ + rm -f $${subdir}/[mM]akefile* ; \ + rm -f $${subdir}/ChangeLog* ; \ + rm -f $${subdir}/dired.todo ; \ + done) ; \ done - -mv -f ${bindir}/emacs ${bindir}/emacs.old - cp src/emacs ${bindir}/emacs-${version} - ln ${bindir}/emacs-${version} ${bindir}/emacs - chmod 1755 ${bindir}/emacs - -rm -f ${bindir}/emacs.old - -## If we let lib-src do its own installation, that means we -## don't have to duplicate the list of utilities to install in -## this Makefile as well. -install.aix: all mkdir - (cd lib-src; $(MAKE) install ${MFLAGS} bindir=${bindir} libdir=${libdir}) - -set ${COPYDESTS} ; \ - for dir in ${COPYDIR} ; do \ - dest=$$1 ; shift ; \ - if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \ - (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xBf - ) ; \ - for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ - rm -rf $${subdir}/RCS ; \ - rm -rf $${subdir}/CVS ; \ - rm -f $${subdir}/\#* ; \ - rm -f $${subdir}/*~ ; \ - done ; \ - fi ; \ - done - -(cd info ; \ - if [ ! -f ${infodir}/dir ]; then \ - ${INSTALL_DATA} ${INSTALLFLAGS} -M 444 -f ${infodir} ./dir ; \ - fi ; \ - if [ "`echo *.info*`" != "*.info*" ]; then \ - for f in *.info* ; do \ - ${INSTALL_DATA} ${INSTALLFLAGS} -M 444 -f ${infodir} $$f ; \ - done ; \ - fi) - ${INSTALL_PROGRAM} ${INSTALLFLAGS} -M 1755 -f ${bindir} src/emacs - mv ${bindir}/emacs ${bindir}/emacs-${version} + -rm -f ${lispdir}/subdirs.el + $(srcdir)/update-subdirs ${lispdir} + if [ -f ${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \ + then true; \ + else \ + (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \ + echo " (normal-top-level-add-subdirs-to-load-path))") \ + > ${datadir}/emacs/${version}/site-lisp/subdirs.el; \ + fi + chmod a+r ${datadir}/emacs/${version}/site-lisp/subdirs.el + -if [ -f ${datadir}/emacs/site-lisp/subdirs.el ]; \ + then true; \ + else \ + (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \ + echo " (normal-top-level-add-subdirs-to-load-path))") \ + > ${datadir}/emacs/site-lisp/subdirs.el; \ + fi + -chmod a+r ${datadir}/emacs/site-lisp/subdirs.el + -unset CDPATH; \ + if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \ + then \ + echo "Copying etc/DOC-* to ${docdir} ..." ; \ + (cd ./etc; tar -cf - DOC*) \ + |(cd ${docdir}; umask 0; tar -xvf - && cat > /dev/null); \ + (cd $(docdir); chmod a+r DOC*; rm DOC); \ + else true; fi + -unset CDPATH; \ + if [ -r ./lisp ] \ + && [ -r ./lisp/simple.el ] \ + && [ x`(cd ./lisp; /bin/pwd)` != x`(cd ${lispdir}; /bin/pwd)` ] \ + && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \ + then \ + echo "Copying lisp/*.el and lisp/*.elc to ${lispdir} ..." ; \ + (cd lisp; tar -cf - *.el *.elc) \ + |(cd ${lispdir}; umask 0; tar -xvf - && cat > /dev/null); \ + else true; fi + -unset CDPATH; \ + thisdir=`/bin/pwd`; \ + if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \ + then \ + (cd ${infodir}; \ + if [ -f dir ]; then true; \ + else \ + (cd $${thisdir}; \ + ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir; \ + chmod a+r ${infodir}/dir); \ + fi; \ + cd ${srcdir}/info ; \ + for f in ada-mode* autotype* ccmode* cl* dired-x* ebrowse* ediff* efaq* emacs* eudc* forms* gnus* idlwave* info* message* mh-e* reftex* sc* vip* widget* pcl-cvs; do \ + (cd $${thisdir}; \ + ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f; \ + chmod a+r ${infodir}/$$f); \ + done); \ + else true; fi + -unset CDPATH; \ + thisdir=`/bin/pwd`; \ + if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \ + then \ + for f in ada-mode autotype ccmode cl dired-x ediff efaq emacs eudc forms gnus idlwave info message mh-e reftex sc vip viper widget pcl-cvs; do \ + (cd $${thisdir}; \ + ${INSTALL_INFO} --dir-file=${infodir}/dir --info-file=${infodir}/$$f); \ + done; \ + else true; fi + -chmod -R a+r ${datadir}/emacs ${COPYDESTS} ${infodir} + thisdir=`/bin/pwd`; \ + cd ${srcdir}/etc; \ for page in emacs etags ctags ; do \ - ${INSTALL_DATA} ${INSTALLFLAGS} -M 444 -f ${mandir} etc/$${page}.1 ;\ + (cd $${thisdir}; \ + ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${man1dir}/$${page}${manext}; \ + chmod a+r ${man1dir}/$${page}${manext}); \ done - -rm -f ${bindir}/emacs - ln ${bindir}/emacs-${version} ${bindir}/emacs + +### Install LEIM files. Although they are machine-independent, we +### have separate target here instead of including it in +### `install-arch-indep'. People who extracted LEIM files after they +### insalled Emacs itself can install only LEIM files by this target. +install-leim: leim/Makefile mkdir + cd leim; $(MAKE) install + +### Build Emacs and install it, stripping binaries while installing them. +install-strip: + $(MAKE) INSTALL_STRIP=-s install ### Build all the directories we're going to install Emacs in. Since ### we may be creating several layers of directories (for example, -### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use make-path -### instead of mkdir. Not all systems' mkdirs have the `-p' flag. +### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs +### instead of mkdir. Not all systems' mkdir programs have the `-p' flag. mkdir: FRC - ./lib-src/make-path ${COPYDESTS} ${lockdir} - chmod 777 ${COPYDESTS} ${lockdir} + if [ -d ${datadir} ]; then true; else \ + $(srcdir)/mkinstalldirs ${datadir}; \ + chmod a+r ${datadir};\ + fi + $(srcdir)/mkinstalldirs ${COPYDESTS} ${infodir} ${man1dir} \ + ${bindir} ${docdir} ${libexecdir} \ + ${datadir}/emacs/site-lisp \ + ${datadir}/emacs/${version}/site-lisp \ + `echo ${locallisppath} | sed 's/:/ /g'` + +### Delete all the installed files that the `install' target would +### create (but not the noninstalled files such as `make all' would +### create). +### +### Don't delete the lisp and etc directories if they're in the source tree. +uninstall: + (cd lib-src; \ + $(MAKE) $(MFLAGS) uninstall \ + prefix=${prefix} exec_prefix=${exec_prefix} \ + bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}) + -unset CDPATH; \ + for dir in ${lispdir} ${etcdir} ; do \ + if [ -d $${dir} ]; then \ + case `(cd $${dir} ; /bin/pwd)` in \ + `(cd ${srcdir} ; /bin/pwd)`* ) ;; \ + * ) rm -rf $${dir} ;; \ + esac ; \ + case $${dir} in \ + ${datadir}/emacs/${version}/* ) \ + rm -rf ${datadir}/emacs/${version} \ + ;; \ + esac ; \ + fi ; \ + done + (cd ${infodir} && rm -f cl* dired-x* ediff* emacs* forms* gnus* info* mh-e* sc* vip*) + (cd ${man1dir} && rm -f emacs.1 etags.1 ctags.1) + (cd ${bindir} && rm -f emacs-${version} $(EMACS)) -FRC: +FRC: # ==================== Cleaning up and miscellanea ==================== -### `clean' -### Delete all files from the current directory that are normally -### created by building the program. Don't delete the files that -### record the configuration. Also preserve files that could be made -### by building, but normally aren't because the distribution comes -### with them. +.PHONY: mostlyclean clean distclean maintainer-clean extraclean + ### `mostlyclean' -### Like `clean', but may refrain from deleting a few files that -### people normally don't want to recompile. For example, the -### `mostlyclean' target for GCC does not delete `libgcc.a', because -### recompiling it is rarely necessary and takes a lot of time. +### Like `clean', but may refrain from deleting a few files that people +### normally don't want to recompile. For example, the `mostlyclean' +### target for GCC does not delete `libgcc.a', because recompiling it +### is rarely necessary and takes a lot of time. +mostlyclean: FRC + (cd src; $(MAKE) $(MFLAGS) mostlyclean) + (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean) + (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean) + (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean) + -(cd man && $(MAKE) $(MFLAGS) mostlyclean) + (cd leim; $(MAKE) $(MFLAGS) mostlyclean) + +### `clean' +### Delete all files from the current directory that are normally +### created by building the program. Don't delete the files that +### record the configuration. Also preserve files that could be made +### by building, but normally aren't because the distribution comes +### with them. ### -clean mostlyclean: - cd src; $(MAKE) clean - cd lib-src; $(MAKE) clean - cd oldXMenu; $(MAKE) clean - if [ `(cd ${etcdir} ; /bin/pwd` != `(cd etc; /bin/pwd)` ] ; then \ - cd etc; $(MAKE) clean; \ - else true; \ - fi +### Delete `.dvi' files here if they are not part of the distribution. +clean: FRC + (cd src; $(MAKE) $(MFLAGS) clean) + (cd oldXMenu; $(MAKE) $(MFLAGS) clean) + (cd lwlib; $(MAKE) $(MFLAGS) clean) + (cd lib-src; $(MAKE) $(MFLAGS) clean) + -(cd man && $(MAKE) $(MFLAGS) clean) + (cd leim; $(MAKE) $(MFLAGS) clean) ### `distclean' -### Delete all files from the current directory that are created by -### configuring or building the program. This should leave only the -### files that would be in the distribution. -distclean: - for i in ${SUBDIR}; do (cd $$i; $(MAKE) ${MFLAGS} distclean); done - -(cd lock; rm *) - -rm config.status config-tmp-* - -### `realclean' -### Delete everything from the current directory that can be -### reconstructed with this makefile. This typically includes -### everything deleted by distclean, plus more: C source files -### produced by Bison, tags tables, info files, and so on. -realclean: - for i in ${SUBDIR}; do (cd $$i; $(MAKE) ${MFLAGS} realclean); done - (cd lock; rm *) - rm config.status +### Delete all files from the current directory that are created by +### configuring or building the program. If you have unpacked the +### source and built the program without creating any other files, +### `make distclean' should leave only the files that were in the +### distribution. +top_distclean=\ + rm -f config.status config.cache config.log ; \ + rm -f Makefile ${SUBDIR_MAKEFILES} ; \ + if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi +distclean: FRC + (cd src; $(MAKE) $(MFLAGS) distclean) + (cd oldXMenu; $(MAKE) $(MFLAGS) distclean) + (cd lwlib; $(MAKE) $(MFLAGS) distclean) + (cd lib-src; $(MAKE) $(MFLAGS) distclean) + (cd man && $(MAKE) $(MFLAGS) distclean) + (cd leim; $(MAKE) $(MFLAGS) distclean) + (cd lisp; $(MAKE) $(MFLAGS) distclean) + ${top_distclean} + +### `maintainer-clean' +### Delete everything from the current directory that can be +### reconstructed with this Makefile. This typically includes +### everything deleted by distclean, plus more: C source files +### produced by Bison, tags tables, info files, and so on. +### +### One exception, however: `make maintainer-clean' should not delete +### `configure' even if `configure' can be remade using a rule in the +### Makefile. More generally, `make maintainer-clean' should not delete +### anything that needs to exist in order to run `configure' and then +### begin to build the program. +maintainer-clean: FRC + (cd src; $(MAKE) $(MFLAGS) maintainer-clean) + (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean) + (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean) + (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean) + -(cd man && $(MAKE) $(MFLAGS) maintainer-clean) + (cd leim; $(MAKE) $(MFLAGS) maintainer-clean) + ${top_distclean} ### This doesn't actually appear in the coding standards, but Karl ### says GCC supports it, and that's where the configuration part of ### the coding standards seem to come from. It's like distclean, but ### it deletes backup and autosave files too. extraclean: - for i in ${SUBDIR}; do (cd $$i; $(MAKE) ${MFLAGS} extraclean); done - -(cd lock; rm *) - -rm config.status config-tmp-* + for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done + ${top_distclean} + -rm config-tmp-* -rm -f *~ \#* - -TAGS tags: lib-src - (cd ${srcdir} ; lib-src/etags --output=./src/TAGS \ - src/*.[ch] lisp/*.el lisp/term/*.el) +### Unlocking and relocking. The idea of these productions is to reduce +### hassles when installing an incremental tar of Emacs. Do `make unlock' +### before unlocking the file to take the write locks off all sources so +### that tar xvof will overwrite them without fuss. Then do `make relock' +### afterward so that VC mode will know which files should be checked in +### if you want to mung them. +### +### Note: it's no disaster if these productions miss a file or two; tar +### and VC will swiftly let you know if this happens, and it is easily +### corrected. +SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in \ + README configure make-dist move-if-change + +.PHONY: unlock relock + +unlock: + chmod u+w $(SOURCES) + -(cd elisp; chmod u+w Makefile README *.texi) + (cd etc; $(MAKE) $(MFLAGS) unlock) + (cd lib-src; $(MAKE) $(MFLAGS) unlock) + (cd lisp; $(MAKE) $(MFLAGS) unlock) + (cd lisp/term; chmod u+w README *.el) + (cd man; chmod u+w *texi* ChangeLog split-man) + (cd oldXMenu; chmod u+w *.[ch] Makefile README) + (cd lwlib; chmod u+w *.[ch] Makefile README) + (cd src; $(MAKE) $(MFLAGS) unlock) + +relock: + chmod u-w $(SOURCES) + -(cd elisp; chmod u-w Makefile README *.texi) + (cd etc; $(MAKE) $(MFLAGS) relock) + (cd lib-src; $(MAKE) $(MFLAGS) relock) + (cd lisp; $(MAKE) $(MFLAGS) relock) + (cd lisp/term; chmod u+w README *.el) + (cd man; chmod u+w *texi* ChangeLog split-man) + (cd oldXMenu; chmod u+w *.[ch] Makefile README) + (cd lwlib; chmod u+w *.[ch] Makefile README) + (cd src; $(MAKE) $(MFLAGS) relock) + +TAGS tags: lib-src src + # The src subdir knows how to do the right thing + # even when the build directory and source dir are different. + cd src; $(MAKE) tags check: @echo "We don't have any tests for GNU Emacs yet." dist: - cd ${srcdir}; make-dist + cd ${srcdir}; ./make-dist + +.PHONY: info dvi dist check html +force-info: +info: force-info + # Note that man/Makefile knows how to + # put the info files in $(srcdir), + # so we can do ok running make in the build dir. + (cd man; $(MAKE) $(MFLAGS) info) +dvi: + (cd man; $(MAKE) $(MFLAGS) dvi) + +#### Bootstrapping. + +### This is meant for Emacs maintainers only. It first cleans the +### lisp subdirectory, removing all compiled Lisp files. Then a +### special emacs executable is built from Lisp sources, which is then +### used to compile Lisp files. The last step is a "normal" make. + +bootstrap: clean bootstrap-lisp-1 bootstrap-src bootstrap-lisp clean all info + +bootstrap-lisp-1: + (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean) + +bootstrap-lisp: + -(cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs) + +bootstrap-src: + (cd src; $(MAKE) $(MFLAGS) bootstrap)