+msgid ""
+"sink_name=<name of the sink> sink_properties=<properties for the sink> "
+"sink_master=<sink to connect to> format=<sample format> rate=<sample rate> "
+"channels=<number of channels> channel_map=<channel map> autoloaded=<set if "
+"this module is being loaded automatically> use_volume_sharing=<yes or no> "
+msgstr ""
+"sink_name=<nom de la destination> sink_properties=<propriétés de la "
+"destination> master=<nom de la destination à filter> format=<format de "
+"l'échantillon> rate=<taux d'échantillonage> channels=<nombre de canaux> "
+"channel_map=<plan des canaux> plugin=<nom de l'extension ladspa> "
+"label=<étiquette de l'extension ladspa> control=<liste des valeurs de "
+"contrôle de l'entrée séparées par des virgules>"
+
+#: ../src/modules/module-filter-apply.c:48
+msgid "autoclean=<automatically unload unused filters?>"
+msgstr ""
+
+#: ../src/tests/resampler-test.c:257
+#, c-format
+msgid ""
+"%s [options]\n"
+"\n"
+"-h, --help Show this help\n"
+"-v, --verbose Print debug messages\n"
+" --from-rate=SAMPLERATE From sample rate in Hz (defaults to "
+"44100)\n"
+" --from-format=SAMPLEFORMAT From sample type (defaults to s16le)\n"
+" --from-channels=CHANNELS From number of channels (defaults to "
+"1)\n"
+" --to-rate=SAMPLERATE To sample rate in Hz (defaults to "
+"44100)\n"
+" --to-format=SAMPLEFORMAT To sample type (defaults to s16le)\n"
+" --to-channels=CHANNELS To number of channels (defaults to 1)\n"
+" --resample-method=METHOD Resample method (defaults to auto)\n"
+" --seconds=SECONDS From stream duration (defaults to 60)\n"
+"\n"
+"If the formats are not specified, the test performs all formats "
+"combinations,\n"
+"back and forth.\n"
+"\n"
+"Sample type must be one of s16le, s16be, u8, float32le, float32be, ulaw, "
+"alaw,\n"
+"32le, s32be (defaults to s16ne)\n"
+"\n"
+"See --dump-resample-methods for possible values of resample methods.\n"
+msgstr ""
+
+#: ../src/tests/resampler-test.c:356
+#, fuzzy, c-format
+msgid "%s %s\n"
+msgstr "%s %s"
+
+#: ../src/tests/resampler-test.c:419
+#, c-format
+msgid "=== %d seconds: %d Hz %d ch (%s) -> %d Hz %d ch (%s)"
+msgstr ""
+
+#~ msgid "[%s:%u] rlimit not supported on this platform."
+#~ msgstr "[%s:%u] rlimit n'est pas pris en charge sur cette plateforme."
+
+#~ msgid "XOpenDisplay() failed"
+#~ msgstr "Échec de XOpenDisplay()"
+
+#~ msgid ""
+#~ "Source Output #%u\n"
+#~ "\tDriver: %s\n"
+#~ "\tOwner Module: %s\n"
+#~ "\tClient: %s\n"
+#~ "\tSource: %u\n"
+#~ "\tSample Specification: %s\n"
+#~ "\tChannel Map: %s\n"
+#~ "\tBuffer Latency: %0.0f usec\n"
+#~ "\tSource Latency: %0.0f usec\n"
+#~ "\tResample method: %s\n"
+#~ "\tProperties:\n"
+#~ "\t\t%s\n"
+#~ msgstr ""
+#~ "Sortie de la source #%u\n"
+#~ "\tPilote : %s\n"
+#~ "\tModule propriétaire : %s\n"
+#~ "\tClient : %s\n"
+#~ "\tSource : %u\n"
+#~ "\tSpécification de l'échantillon : %s\n"
+#~ "\tPlan des canaux : %s\n"
+#~ "\tLatence du tampon : %0.0f µs\n"
+#~ "\tLatence de la source : %0.0f µs\n"
+#~ "\tMéthode de rééchantillonnage : %s\n"
+#~ "\tPropriétés :\n"
+#~ "\t\t%s\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s [options] stat\n"
+#~ "%s [options] list\n"
+#~ "%s [options] exit\n"
+#~ "%s [options] upload-sample FILENAME [NAME]\n"
+#~ "%s [options] play-sample NAME [SINK]\n"
+#~ "%s [options] remove-sample NAME\n"
+#~ "%s [options] move-sink-input SINKINPUT SINK\n"
+#~ "%s [options] move-source-output SOURCEOUTPUT SOURCE\n"
+#~ "%s [options] load-module NAME [ARGS ...]\n"
+#~ "%s [options] unload-module MODULE\n"
+#~ "%s [options] suspend-sink SINK 1|0\n"
+#~ "%s [options] suspend-source SOURCE 1|0\n"
+#~ "%s [options] set-card-profile CARD PROFILE\n"
+#~ "%s [options] set-sink-port SINK PORT\n"
+#~ "%s [options] set-source-port SOURCE PORT\n"
+#~ "%s [options] set-sink-volume SINK VOLUME\n"
+#~ "%s [options] set-source-volume SOURCE VOLUME\n"
+#~ "%s [options] set-sink-input-volume SINKINPUT VOLUME\n"
+#~ "%s [options] set-sink-mute SINK 1|0\n"
+#~ "%s [options] set-source-mute SOURCE 1|0\n"
+#~ "%s [options] set-sink-input-mute SINKINPUT 1|0\n"
+#~ "%s [options] subscribe\n"
+#~ "\n"
+#~ " -h, --help Show this help\n"
+#~ " --version Show version\n"
+#~ "\n"
+#~ " -s, --server=SERVER The name of the server to connect "
+#~ "to\n"
+#~ " -n, --client-name=NAME How to call this client on the "
+#~ "server\n"
+#~ msgstr ""
+#~ "%s [options] stat\n"
+#~ "%s [options] list\n"
+#~ "%s [options] exit\n"
+#~ "%s [options] upload-sample NOMDEFICHIER [NOM]\n"
+#~ "%s [options] play-sample NOM [DEST]\n"
+#~ "%s [options] remove-sample NOM\n"
+#~ "%s [options] move-sink-input ID DEST\n"
+#~ "%s [options] move-source-output ID SOURCE\n"
+#~ "%s [options] load-module NOM [PARAMS ...]\n"
+#~ "%s [options] unload-module ID\n"
+#~ "%s [options] suspend-sink [DEST] 1|0\n"
+#~ "%s [options] suspend-source [SOURCE] 1|0\n"
+#~ "%s·[options]·set-card-profile·[CARTE]·[PROFIL]·\n"
+#~ "%s [options] set-sink-port DEST PORT\n"
+#~ "%s [options] set-source-port SOURCE PORT\n"
+#~ "%s [options] set-sink-volume DEST VOLUME\n"
+#~ "%s [options] set-source-volume SOURCE VOLUME\n"
+#~ "%s [options] set-sink-input-volume ENTREEDEST VOLUME\n"
+#~ "%s [options] set-sink-mute DEST 1|0\n"
+#~ "%s [options] set-source-mute SOURCE 1|0\n"
+#~ "%s [options] set-sink-input-mute ENTREEDEST 1|0\n"
+#~ "\n"
+#~ " -h, --help Affiche cette aide\n"
+#~ " --version Affiche la version\n"
+#~ "\n"
+#~ " -s, --server=SERVEUR Le nom du serveur auquel se "
+#~ "connecter\n"
+#~ " -n, --client-name=NOM Définit le nom de ce client sur "
+#~ "le serveur\n"
+
+#~ msgid "%s+%s"
+#~ msgstr "%s+%s"
+
+#~ msgid "%s / %s"
+#~ msgstr "%s / %s"
+
+#~ msgid "Digital Surround 4.0 (IEC958)"
+#~ msgstr "Surround numérique 4.0 (IEC958)"
+
+#~ msgid "Low Frequency Emmiter"
+#~ msgstr "Émetteur à basse fréquence"
+
+#~ msgid "Invalid client name '%s'\n"
+#~ msgstr "Plan des canaux invalide « %s »\n"
+
+#~ msgid "Failed to determine sample specification from file.\n"
+#~ msgstr "Échec lors de l'obtention des informations de l'échantillon : %s\n"
+
+#~ msgid "select(): %s"
+#~ msgstr "select() : %s"
+
+#~ msgid "Cannot connect to system bus: %s"
+#~ msgstr "Impossible de se connecter au bus système : %s"
+
+#~ msgid "Cannot get caller from PID: %s"
+#~ msgstr "Impossible d'obtenir le programme appelant à partir du PID : %s"
+
+#~ msgid "Cannot set UID on caller object."
+#~ msgstr "Impossible de définir un UID sur l'objet appelant."
+
+#~ msgid "Failed to get CK session."
+#~ msgstr "Échec lors de l'obtention de la session CK."
+
+#~ msgid "Cannot set UID on session object."
+#~ msgstr "Impossible de définir l'UID sur l'objet de session."
+
+#~ msgid "Cannot allocate PolKitAction."
+#~ msgstr "Impossible d'allouer PolKitAction."
+
+#~ msgid "Cannot set action_id"
+#~ msgstr "Impossible de définir action_id."
+
+#~ msgid "Cannot allocate PolKitContext."
+#~ msgstr "Impossible d'allouer PolKitContext."
+
+#~ msgid "Cannot initialize PolKitContext: %s"
+#~ msgstr "Impossible d'initialiser PolKitContext : %s"
+
+#~ msgid "Could not determine whether caller is authorized: %s"
+#~ msgstr "Impossible de déterminer si le programme appelant est autorisé : %s"
+
+#~ msgid "Cannot obtain auth: %s"
+#~ msgstr "Impossible d'obtenir l'authentification : %s"
+
+#~ msgid "PolicyKit responded with '%s'"
+#~ msgstr "PolicyKit a renvoyé « %s »"
+
+#~ msgid ""
+#~ "High-priority scheduling (negative Unix nice level) for the PulseAudio "
+#~ "daemon"
+#~ msgstr ""
+#~ "Ordonnancement haute priorité (niveau Unix « nice » négatif) pour le "
+#~ "démon PulseAudio"
+
+#~ msgid "Real-time scheduling for the PulseAudio daemon"
+#~ msgstr "Ordonnancement en temps réel pour le démon PulseAudio"
+
+#~ msgid ""
+#~ "System policy prevents PulseAudio from acquiring high-priority scheduling."
+#~ msgstr ""
+#~ "La politique du système empêche PulseAudio d'acquérir un ordonnancement "
+#~ "haute priorité"
+
+#~ msgid ""
+#~ "System policy prevents PulseAudio from acquiring real-time scheduling."
+#~ msgstr ""
+#~ "La politique du système empêche PulseAudio d'acquérir un ordonnancement "
+#~ "en temps réel"
+
+#~ msgid "read() failed: %s\n"
+#~ msgstr "Échec de read() : %s\n"
+
+#~ msgid "pa_context_connect() failed: %s\n"
+#~ msgstr "Échec de pa_context_connect() : %s"
+
+#~ msgid "We're in the group '%s', allowing high-priority scheduling."
+#~ msgstr ""
+#~ "Nous sommes dans le groupe « %s », permettant une planification à haute "
+#~ "priorité."
+
+#~ msgid "We're in the group '%s', allowing real-time scheduling."
+#~ msgstr ""
+#~ "Nous sommes dans le groupe « %s », permettant un ordonnancement en temps "
+#~ "réel."
+
+#~ msgid "PolicyKit grants us acquire-high-priority privilege."
+#~ msgstr ""
+#~ "PolicyKit a accordé l'acquisition des permissions de haute priorité."
+
+#~ msgid "PolicyKit refuses acquire-high-priority privilege."
+#~ msgstr "PolicyKit a refusé l'acquisition des permissions de haute priorité."
+
+#~ msgid "PolicyKit grants us acquire-real-time privilege."
+#~ msgstr "PolicyKit a accordé l'acquisition des permissions de temps réel."
+
+#~ msgid "PolicyKit refuses acquire-real-time privilege."
+#~ msgstr "PolicyKit a refusé l'acquisition des permissions de temps réel."
+
+#~ msgid ""
+#~ "Called SUID root and real-time and/or high-priority scheduling was "
+#~ "requested in the configuration. However, we lack the necessary "
+#~ "privileges:\n"
+#~ "We are not in group '%s', PolicyKit refuse to grant us the requested "
+#~ "privileges and we have no increase RLIMIT_NICE/RLIMIT_RTPRIO resource "
+#~ "limits.\n"
+#~ "For enabling real-time/high-priority scheduling please acquire the "
+#~ "appropriate PolicyKit privileges, or become a member of '%s', or increase "
+#~ "the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user."
+#~ msgstr ""
+#~ "Le SUID root et l'ordonnancement en temps réel et/ou haute priorité ont "
+#~ "été spécifiés dans la configuration. Cependant, il nous manque les "
+#~ "privilèges nécessaires :\n"
+#~ "Nous ne sommes pas dans le groupe « %s », PolicyKit refuse de nous "
+#~ "accorder les privilèges demandés et nous devons augmenter les limites de "
+#~ "ressources RLIMIT_NICE/RLIMIT_RTPRIO.\n"
+#~ "Pour activer l'ordonnancement en temps réel/haute priorité, veuillez "
+#~ "acquérir les privilèges PolicyKit apropriés, ou devenir membre de « %s », "
+#~ "ou augmenter les limites de ressources RLIMIT_NICE/RLIMIT_RTPRIO pour cet "
+#~ "utilisateur."
+
+#~ msgid ""
+#~ "High-priority scheduling enabled in configuration but not allowed by "
+#~ "policy."
+#~ msgstr ""
+#~ "La planification à haute priorité est activée dans la configuration mais "
+#~ "n'est pas permise par la politique."
+
+#~ msgid "Successfully increased RLIMIT_RTPRIO"
+#~ msgstr "Augmentation de RLIMIT_RTPRIO réussie"
+
+#~ msgid "RLIMIT_RTPRIO failed: %s"
+#~ msgstr "RLIMIT_RTPRIO a échoué : %s"
+
+#~ msgid "Giving up CAP_NICE"
+#~ msgstr "Abandon de CAP_NICE"
+
+#~ msgid ""
+#~ "Real-time scheduling enabled in configuration but not allowed by policy."
+#~ msgstr ""
+#~ "La planification en temps réel est activée mais n'est pas permise par la "
+#~ "politique."
+
+#~ msgid "Limited capabilities successfully to CAP_SYS_NICE."
+#~ msgstr "Limitation des capacités à CAP_SYS_NICE réussie."
+
+#~ msgid "time_new() failed.\n"
+#~ msgstr "Échec de time_new().\n"
+
+#~ msgid "Output %s + Input %s"
+#~ msgstr "Sortie %s + Entrée %s"
+
+#~ msgid "Stream successfully created\n"
+#~ msgstr "Création du flux réussie\n"
+
+#~ msgid "Stream errror: %s\n"
+#~ msgstr "Erreur du flux : %s\n"
+
+#~ msgid "Connection established.\n"
+#~ msgstr "Connexion établie.\n"
+
+#~ msgid ""
+#~ "%s [options] [FILE]\n"
+#~ "\n"
+#~ " -h, --help Show this help\n"
+#~ " --version Show version\n"
+#~ "\n"
+#~ " -v, --verbose Enable verbose operation\n"
+#~ "\n"
+#~ " -s, --server=SERVER The name of the server to connect "
+#~ "to\n"
+#~ " -d, --device=DEVICE The name of the sink to connect "
+#~ "to\n"
+#~ " -n, --client-name=NAME How to call this client on the "
+#~ "server\n"
+#~ " --stream-name=NAME How to call this stream on the "
+#~ "server\n"
+#~ " --volume=VOLUME Specify the initial (linear) "
+#~ "volume in range 0...65536\n"
+#~ " --channel-map=CHANNELMAP Set the channel map to the use\n"
+#~ msgstr ""
+#~ "%s [options] [FICHIER]\n"
+#~ "\n"
+#~ " -h, --help Affiche cette aide\n"
+#~ " --version Affiche la version\n"
+#~ "\n"
+#~ " -v, --verbose Active le mode verbeux\n"
+#~ "\n"
+#~ " -s, --server=SERVEUR Le nom du serveur auquel se "
+#~ "connecter\n"
+#~ " -d, --device=PÉRIPHÉRIQUE Le nom de la destination à "
+#~ "laquelle se connecter\n"
+#~ " -n, --client-name=NOM Définit le nom de ce client sur "
+#~ "le serveur\n"
+#~ " --stream-name=NOM Définit le nom de ce flux sur le "
+#~ "serveur\n"
+#~ " --volume=VOLUME Définit le volume initial "
+#~ "(linéaire) entre 0 et 65536\n"
+#~ " --channel-map=PLANDESCANAUX Définit le plan des canaux à "
+#~ "utiliser\n"
+
+#~ msgid ""
+#~ "paplay %s\n"
+#~ "Compiled with libpulse %s\n"
+#~ "Linked with libpulse %s\n"
+#~ msgstr ""
+#~ "paplay %s\n"
+#~ "Compilé avec libpulse %s\n"
+#~ "Lié avec libpulse %s\n"
+
+#~ msgid "Invalid channel map\n"
+#~ msgstr "Plan des canaux invalide\n"
+
+#~ msgid "Failed to open file '%s'\n"
+#~ msgstr "Échec lors de l'ouverture du fichier « %s »\n"
+
+#~ msgid "Channel map doesn't match file.\n"
+#~ msgstr "Le plan des canaux ne correspond pas au fichier.\n"
+
+#~ msgid "Using sample spec '%s'\n"
+#~ msgstr "Utilisation de la spécification de l'échantillon « %s »\n"
+