+#: ../src/modules/alsa/alsa-mixer.c:3997
+#, fuzzy, c-format
+msgid "%s Output"
+msgstr "Пустой выход"
+
+#: ../src/modules/alsa/alsa-mixer.c:4005
+#, fuzzy, c-format
+msgid "%s Input"
+msgstr "Ввод"
+
+#: ../src/modules/echo-cancel/module-echo-cancel.c:63
+msgid ""
+"source_name=<name for the source> source_properties=<properties for the "
+"source> source_master=<name of source to filter> sink_name=<name for the "
+"sink> sink_properties=<properties for the sink> sink_master=<name of sink to "
+"filter> adjust_time=<how often to readjust rates in s> adjust_threshold=<how "
+"much drift to readjust after in ms> format=<sample format> rate=<sample "
+"rate> channels=<number of channels> channel_map=<channel map> "
+"aec_method=<implementation to use> aec_args=<parameters for the AEC engine> "
+"save_aec=<save AEC data in /tmp> autoloaded=<set if this module is being "
+"loaded automatically> use_volume_sharing=<yes or no> "
+msgstr ""
+
+#: ../src/modules/module-equalizer-sink.c:72
+msgid "General Purpose Equalizer"
+msgstr ""
+
+#: ../src/modules/module-equalizer-sink.c:76
+#, fuzzy
+msgid ""
+"sink_name=<name of the sink> sink_properties=<properties for the sink> "
+"sink_master=<sink to connect to> format=<sample format> rate=<sample rate> "
+"channels=<number of channels> channel_map=<channel map> autoloaded=<set if "
+"this module is being loaded automatically> use_volume_sharing=<yes or no> "
+msgstr ""
+"sink_name=<имя аудиоприёмника> sink_properties=<свойства аудиоприёмника> "
+"master=<имя аудиоприёмника для фильтрации> format=<формат> rate=<частота> "
+"channels=<число каналов> channel_map=<схема каналов> plugin=<имя плагина "
+"ladspa> label=<метка плагина ladspa> control=<список входных значений, "
+"разделённый запятыми>"
+
+#: ../src/modules/module-filter-apply.c:48
+msgid "autoclean=<automatically unload unused filters?>"
+msgstr ""
+
+#: ../src/tests/resampler-test.c:257
+#, c-format
+msgid ""
+"%s [options]\n"
+"\n"
+"-h, --help Show this help\n"
+"-v, --verbose Print debug messages\n"
+" --from-rate=SAMPLERATE From sample rate in Hz (defaults to "
+"44100)\n"
+" --from-format=SAMPLEFORMAT From sample type (defaults to s16le)\n"
+" --from-channels=CHANNELS From number of channels (defaults to "
+"1)\n"
+" --to-rate=SAMPLERATE To sample rate in Hz (defaults to "
+"44100)\n"
+" --to-format=SAMPLEFORMAT To sample type (defaults to s16le)\n"
+" --to-channels=CHANNELS To number of channels (defaults to 1)\n"
+" --resample-method=METHOD Resample method (defaults to auto)\n"
+" --seconds=SECONDS From stream duration (defaults to 60)\n"
+"\n"
+"If the formats are not specified, the test performs all formats "
+"combinations,\n"
+"back and forth.\n"
+"\n"
+"Sample type must be one of s16le, s16be, u8, float32le, float32be, ulaw, "
+"alaw,\n"
+"32le, s32be (defaults to s16ne)\n"
+"\n"
+"See --dump-resample-methods for possible values of resample methods.\n"
+msgstr ""
+
+#: ../src/tests/resampler-test.c:356
+#, fuzzy, c-format
+msgid "%s %s\n"
+msgstr "%s %s"
+
+#: ../src/tests/resampler-test.c:419
+#, c-format
+msgid "=== %d seconds: %d Hz %d ch (%s) -> %d Hz %d ch (%s)"
+msgstr ""
+
+#~ msgid "[%s:%u] rlimit not supported on this platform."
+#~ msgstr "[%s:%u] rlimit не поддерживается на этой платформе."
+
+#~ msgid "XOpenDisplay() failed"
+#~ msgstr "XOpenDisplay() не удалось"
+
+#~ msgid ""
+#~ "Source Output #%u\n"
+#~ "\tDriver: %s\n"
+#~ "\tOwner Module: %s\n"
+#~ "\tClient: %s\n"
+#~ "\tSource: %u\n"
+#~ "\tSample Specification: %s\n"
+#~ "\tChannel Map: %s\n"
+#~ "\tBuffer Latency: %0.0f usec\n"
+#~ "\tSource Latency: %0.0f usec\n"
+#~ "\tResample method: %s\n"
+#~ "\tProperties:\n"
+#~ "\t\t%s\n"
+#~ msgstr ""
+#~ "Выход источника #%u\n"
+#~ "\tДрайвер: %s\n"
+#~ "\tРодительский модуль: %s\n"
+#~ "\tКлиент: %s\n"
+#~ "\tИсточник: %u\n"
+#~ "\tСпецификация сэмплов: %s\n"
+#~ "\tСхема каналов: %s\n"
+#~ "\tЗадержка буфера: %0.0f мкс\n"
+#~ "\tЗадержка источника: %0.0f мкс\n"
+#~ "\tМетод ресэмплирования: %s\n"
+#~ "\tСвойства:\n"
+#~ "\t\t%s\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s [options] stat\n"
+#~ "%s [options] list\n"
+#~ "%s [options] exit\n"
+#~ "%s [options] upload-sample FILENAME [NAME]\n"
+#~ "%s [options] play-sample NAME [SINK]\n"
+#~ "%s [options] remove-sample NAME\n"
+#~ "%s [options] move-sink-input SINKINPUT SINK\n"
+#~ "%s [options] move-source-output SOURCEOUTPUT SOURCE\n"
+#~ "%s [options] load-module NAME [ARGS ...]\n"
+#~ "%s [options] unload-module MODULE\n"
+#~ "%s [options] suspend-sink SINK 1|0\n"
+#~ "%s [options] suspend-source SOURCE 1|0\n"
+#~ "%s [options] set-card-profile CARD PROFILE\n"
+#~ "%s [options] set-sink-port SINK PORT\n"
+#~ "%s [options] set-source-port SOURCE PORT\n"
+#~ "%s [options] set-sink-volume SINK VOLUME\n"
+#~ "%s [options] set-source-volume SOURCE VOLUME\n"
+#~ "%s [options] set-sink-input-volume SINKINPUT VOLUME\n"
+#~ "%s [options] set-sink-mute SINK 1|0\n"
+#~ "%s [options] set-source-mute SOURCE 1|0\n"
+#~ "%s [options] set-sink-input-mute SINKINPUT 1|0\n"
+#~ "%s [options] subscribe\n"
+#~ "\n"
+#~ " -h, --help Show this help\n"
+#~ " --version Show version\n"
+#~ "\n"
+#~ " -s, --server=SERVER The name of the server to connect "
+#~ "to\n"
+#~ " -n, --client-name=NAME How to call this client on the "
+#~ "server\n"
+#~ msgstr ""
+#~ "%s [options] stat\n"
+#~ "%s [options] list\n"
+#~ "%s [options] exit\n"
+#~ "%s [options] upload-sample FILENAME [NAME]\n"
+#~ "%s [options] play-sample NAME [SINK]\n"
+#~ "%s [options] remove-sample NAME\n"
+#~ "%s [options] move-sink-input SINKINPUT SINK\n"
+#~ "%s [options] move-source-output SOURCEOUTPUT SOURCE\n"
+#~ "%s [options] load-module NAME [ARGS ...]\n"
+#~ "%s [options] unload-module MODULE\n"
+#~ "%s [options] suspend-sink SINK 1|0\n"
+#~ "%s [options] suspend-source SOURCE 1|0\n"
+#~ "%s [options] set-card-profile CARD PROFILE\n"
+#~ "%s [options] set-sink-port SINK PORT\n"
+#~ "%s [options] set-source-port SOURCE PORT\n"
+#~ "%s [options] set-sink-volume SINK VOLUME\n"
+#~ "%s [options] set-source-volume SOURCE VOLUME\n"
+#~ "%s [options] set-sink-input-volume SINKINPUT VOLUME\n"
+#~ "%s [options] set-sink-mute SINK 1|0\n"
+#~ "%s [options] set-source-mute SOURCE 1|0\n"
+#~ "%s [options] set-sink-input-mute SINKINPUT 1|0\n"
+#~ "\n"
+#~ " -h, --help Show this help\n"
+#~ " --version Show version\n"
+#~ "\n"
+#~ " -s, --server=SERVER The name of the server to connect "
+#~ "to\n"
+#~ " -n, --client-name=NAME How to call this client on the "
+#~ "server\n"
+
+#~ msgid "%s+%s"
+#~ msgstr "%s+%s"
+
+#~ msgid "%s / %s"
+#~ msgstr "%s / %s"
+
+#~ msgid "Digital Surround 4.0 (IEC958)"
+#~ msgstr "Цифровой объёмный 4.0 (IEC958)"
+