a locally-compiled GNU-EFI package, but older and more recent versions
assume GNU-EFI installation in typical locations for
distribution-provided packages. The legacy BIOS boot support on
- UEFI-based PCs doesn't work when GNU-EFI is compiled under GNU-EFI, so
+ UEFI-based PCs doesn't work when rEFInd is compiled under GNU-EFI, so
as of rEFInd 0.4.6, GNU-EFI is no longer the primary build environment,
although it's easier to set up on a Linux system.
2) Type "mkdir /usr/local/UDK2010". You can use another directory, but the
Makefile for rEFInd's EFI drivers assumes this location. You'll need to
- edit the EDK2BASE line in the Make.common file if you install somewhere
+ edit the EDK2BASE line in the Make.tiano file if you install somewhere
else.
3) Type "cd /usr/local/UDK2010".
4) Type "make gnuefi" to build with GNU-EFI, or either "make" alone or
"make tiano" to build with TianoCore EDK2. With any luck, rEFInd will
compile without error, leaving the "refind_ia32.efi" or "refind_x64.efi"
- file, depending on your platform, in the "refind" subdirectory. If you
- want to build IA32 binaries on an x86-64 (X64) system, type "ARCH=ia32
- make". This works only if you're using the TianoCore build kit, and only
- if you set TARGET_ARCH to either "IA32" or "IA32 X64" in target.txt when
- you set up the TianoCore toolkit. If you plan to build both
- architectures, be sure to copy the .efi file for the first build out of
- the refind subdirectory before building the second architecture.
+ file, depending on your platform, in the "refind" subdirectory. This same
+ step builds the "gptsync_x64.efi" or "gptsync_ia32.efi" program file, in
+ the "gptsync" subdirectory. If you want to build IA32 binaries on an
+ x86-64 (X64) system, type "ARCH=ia32 make". This works only if you're
+ using the TianoCore build kit, and only if you set TARGET_ARCH to either
+ "IA32" or "IA32 X64" in target.txt when you set up the TianoCore toolkit.
+ If you plan to build both architectures, be sure to copy the .efi file
+ for the first build out of the refind subdirectory before building the
+ second architecture.
5) The default build process does NOT build the filesystem drivers. If you
want to build them, you must type "make fs" in the main rEFInd source
default Make.common file includes the following definitions:
EFIINC = /usr/include/efi
-GNUEFILIB = /usr/lib
-EFILIB = /usr/lib
-EFICRT0 = /usr/lib
+GNUEFILIB = /usr/lib64
+EFILIB = /usr/lib64
+EFICRT0 = /usr/lib64
If you've installed GNU-EFI from source code, you may need to add "local"
to those paths, as in "/usr/local/include/efi". You might need to change
-references to "lib" to "lib64" on some systems. Recall that you need at
-least GNU-EFI version 3.0l to build rEFInd, and until very recently, most
-distributions provided out-of-date versions of this package.
+references to "lib64" to "lib32" or "lib" on some systems. Recall that you
+need at least GNU-EFI version 3.0l to build rEFInd, and until very
+recently, most distributions provided out-of-date versions of this package.
If you're using TianoCore's EDK2, as noted earlier, you may need to adjust
the EDK2BASE variable in Make.tiano and filesystems/Make.tiano.