href="mailto:rodsmith@rodsbooks.com">rodsmith@rodsbooks.com</a></p>
<p>Originally written: 3/14/2012; last Web page update:
-2/1/2014, referencing rEFInd 0.8.5</p>
+3/1/2015, referencing rEFInd 0.8.7</p>
<p>This Web page is provided free of charge and with no annoying outside ads; however, I did take time to prepare it, and Web hosting does cost money. If you find this Web page useful, please consider making a small donation to help keep this site up and running. Thanks!</p>
<p>I provide RPM and Debian package files for rEFInd; and starting with version 0.8.1, I'm maintaining an Ubuntu PPA for rEFInd. If you have a working RPM-based or Debian-based Linux installation that boots in EFI mode, using one of these files is likely to be the easiest way to install rEFInd: You need only download the file and issue an appropriate installation command. In some cases, double-clicking the package in your file manager will install it. If that doesn't work, a command like the following will install the RPM on an RPM-based system:</p>
-<pre class="listing"># <tt class="userinput">rpm -Uvh refind-0.8.4-1.x86_64.rpm</tt></pre>
+<pre class="listing"># <tt class="userinput">rpm -Uvh refind-0.8.7-1.x86_64.rpm</tt></pre>
<p>On a Debian-based system, the equivalent command is:</p>
-<pre class="listing"># <tt class="userinput">dpkg -i refind_0.8.4-1_amd64.deb</tt></pre>
+<pre class="listing"># <tt class="userinput">dpkg -i refind_0.8.7-1_amd64.deb</tt></pre>
<p>Either command produces output similar to that described for <a href="#installsh">using the <tt>install.sh</tt> script,</a> so you can check it for error messages and other signs of trouble. The package file installs rEFInd and registers it with the EFI to be the default boot loader. The script that runs as part of the installation process tries to determine if you're using Secure Boot, and if so it will try to configure rEFInd to launch using shim; however, this won't work correctly on all systems. Ubuntu 12.10 users who are booting with Secure Boot active should be wary, since the resulting installation will probably try to use Ubuntu's version of shim, which won't work correctly with rEFInd. The shim program provided with more recent versions of Ubuntu should work correctly.</p>
/dev/sda1 191284 16604 174681 9% /boot/efi
</pre>
-<p class="sidebar"><b>Warning:</b> If you're running Linux on a Mac, I recommend you install rEFInd under OS X. The Mac's boot process deviates a bit from EFI standards, so you'll probably have to use a tool called <tt>bless</tt> under Mac OS to do the job. Alternatively, there's a new Linux program, <tt>hfs-bless</tt>, part of the <a href="http://www.codon.org.uk/~mjg59/mactel-boot/"><tt>mactel-boot</tt></a> package, that's supposed to work with <tt>efibootmgr</tt> to make a Mac HFS partition bootable. I've not yet tried it, though. There are also reports that the <tt>efibootmgr</tt> tool used under Linux can corrupt some Macs' firmware. Although I've seen some vague suggestions that this problem has been fixed under 3.<i>x</i> kernels, I haven't tested this claim.</p>
+<p class="sidebar"><b>Warning:</b> If you're running Linux on a Mac, I recommend you install rEFInd under OS X. The Mac's boot process deviates a bit from EFI standards, so you'll probably have to use a tool called <tt>bless</tt> under Mac OS to do the job. Alternatively, there's a new Linux program, <tt>hfs-bless</tt>, part of the <a href="http://www.codon.org.uk/~mjg59/mactel-boot/"><tt>mactel-boot</tt></a> RPM package or as part of the <a href="https://launchpad.net/~detly/+archive/ubuntu/mactel-utils">mactel-utils PPA for Ubuntu</a>, that's supposed to work with <tt>efibootmgr</tt> to make a Mac HFS partition bootable. I've not yet tried it, though. There are also reports that the <tt>efibootmgr</tt> tool used under Linux can corrupt some Macs' firmware. Although I've seen some vague suggestions that this problem has been fixed under 3.<i>x</i> kernels, I haven't tested this claim.</p>
<p>This example shows that <tt>/dev/sda1</tt> is mounted at <tt>/boot/efi</tt>, which is a typical configuration. (The ESP can be on another disk or partition, but <tt>/dev/sda1</tt> is the most common place for an ESP.) If your output shows <tt>/boot</tt> or <tt>/</tt> under the <tt>Mounted on</tt> column, then your ESP isn't mounted. (An exception is if you're mounting the ESP at <tt>/boot</tt>. This is an unusual configuration. If you're using it, you can proceed, making suitable adjustments to subsequent commands.) If you get a <tt>df: `/boot/efi': No such file or directory</tt> error message, then the <tt>/boot/efi</tt> directory doesn't even exist. In such cases, you may need to jump through some extra hoops, as described on my <a href="http://www.rodsbooks.com/efi-bootloaders/installation.html">EFI Boot Loader Installation</a> page.</p>
<p>Prior to version 0.8.5, these instructions and the <tt>install.sh</tt> script omitted the <tt>--shortform</tt> option from the <tt>bless</tt> command when installing rEFInd to the ESP. An rEFInd user, however, discovered that using the option eliminated the 30-second delay, so it is now the default with 0.8.5's <tt>install.sh</tt>, and is specified in the instructions. If you installed rEFInd 0.8.4 or earlier, you may want to re-install or re-<tt>bless</tt> rEFInd using this option.</p>
-<p>There is one caveat, though: The <tt>man</tt> page for <tt>bless</tt> notes that <tt>--shortform</tt> notes that its use can come "at the expense of boot time performance." Thus, it's not clear to me that this option might not actually <i>create</i> problems on some computers. (It's eliminated the boot delay on my 2014 MacBook Air and has no detrimental effect on an old 32-bit Mac Mini that's never had a boot delay problem, though.) Thus, if you have problems with rEFInd 0.8.5, you might try running <tt>bless</tt>, as described in <a href="#osx">Installing rEFInd Manually Using OS X's</a> step 8, but <i>omit</i> the <tt>--shortform</tt> option.</p>
+<p>There is one caveat, though: The <tt>man</tt> page for <tt>bless</tt> notes that <tt>--shortform</tt> notes that its use can come "at the expense of boot time performance." Thus, it's not clear to me that this option might not actually <i>create</i> problems on some computers. (It's eliminated the boot delay on my 2014 MacBook Air and has no detrimental effect on an old 32-bit Mac Mini that's never had a boot delay problem, though.) Thus, if you have problems with rEFInd 0.8.5
or later, you might try running <tt>bless</tt>, as described in <a href="#osx">Installing rEFInd Manually Using OS X's</a> step 8, but <i>omit</i> the <tt>--shortform</tt> option.</p>
<a name="fallback">
<h3>Using the Fallback Filename</h3>