href="mailto:rodsmith@rodsbooks.com">rodsmith@rodsbooks.com</a></p>
<p>Originally written: 4/19/2012; last Web page update:
-12/11/2012, referencing rEFInd 0.5.1</p>
+12/16/2012, referencing rEFInd 0.6.0</p>
<p>I'm a technical writer and consultant specializing in Linux technologies. This Web page is provided free of charge and with no annoying outside ads; however, I did take time to prepare it, and Web hosting does cost money. If you find this Web page useful, please consider making a small donation to help keep this site up and running. Thanks!</p>
<li><b>Ext4fs</b>—Stefan Agner modified the rEFIt/rEFInd ext2fs
driver so that it could handle ext4fs. I'm including this as a separate
- driver from the ext2fs driver, although the ext4fs version seems to be
- able to handle ext2fs and ext3fs, too.</li>
+ driver from the ext2fs driver, although the ext4fs version can handle
+ ext2fs and ext3fs, too. (I may eventually retire the original ext2fs
+ driver, but I want to be conservative about this in case there's an
+ undiscovered problem with the new driver.) This driver has some
+ limitations. Most notably, for various reasons it maxes out at 16TiB
+ and won't mount any ext4 filesystem that's larger than this. It also
+ doesn't support the <tt>meta_bg</tt> option flag; if your filesystem
+ uses this flag, this driver refuses to read it. You can learn about
+ your ext2/3/4 filesystem features by typing <tt
+ class="userinput">dumpe2fs <i>/dev/sda2</i> | grep features</tt>,
+ changing <tt class="userinput"><i>/dev/sda2</i></tt> to your
+ filesystem's device.</li>
<li><b>ISO-9660</b>—This driver originated with rEFIt's author, but
he never released a final version. Its code was improved by Oracle for
<p>All of these drivers rely on filesystem wrapper code written by rEFIt's author, Christoph Phisterer. They all suffer from speed problems on some systems, as described later in <a href="#notes">"Notes on Specific Drivers;"</a> however, these problems are very minor on most systems.</p>
-<p class="sidebar"><b>Note:</b> rEFInd's <tt>install.sh</tt> script does not install drivers by default
. It does if you pass it the <tt>--drivers</tt> option, though. If you installed manually, you may also have installed rEFInd's drivers. See the <a href="installing.html">Installing rEFInd</a> page for details.</p>
+<p class="sidebar"><b>Note:</b> rEFInd's <tt>install.sh</tt> script does not install drivers by default
on OS X, but on Linux, it installs the driver required to read the <tt>/boot</tt> directory, if one is available. The script installs all the available drivers if you pass it the <tt>--drivers</tt> option. See the <a href="installing.html">Installing rEFInd</a> page for details.</p>
<p>If you want to use one or more of these drivers, you can install them from the rEFInd binary package from the <tt>refind/drivers_<tt class="variable">arch</tt></tt> directory, where <tt class="variable">arch</tt> is a CPU architecture code—<tt>x64</tt> or <tt>ia32</tt>. The files are named after the filesystems they handle, such as <tt>ext2_x64.efi</tt> for the 64-bit ext2fs driver. You should copy the files for the filesystems you want to use to the <tt>drivers</tt> or <tt>drivers_<tt class="variable">arch</tt></tt> subdirectory of the main rEFInd installation directory. (You may need to create this subdirectory.) Be careful to install drivers only for your own architecture. Attempting to load drivers for the wrong CPU type will cause a small delay at best, or may cause the computer to crash at worst. I've placed rEFInd's drivers in directories that are named to minimize this risk, but you should exercise care when copying driver files.</p>
<h2>Notes on Specific Drivers</h2>
</a>
-<p>I've tested several of the drivers described on this page on a handful of systems. The Pfisterer ext2fs driver (from any source) works on both ext2fs and ext3fs, but not on ext4fs—but Agner's derivative ext4fs driver handles ext4fs, so that's not a problem. The ReiserFS driver is obviously useful only on ReiserFS partitions. (Reiser4 is not supported, as far as I know.) Given that ext2fs, ext3fs, and ReiserFS are getting a bit on in age by Linux standards, you might do well to use them on a separate Linux <tt>/boot</tt> partition; however, if you're willing to use ext3fs or ReiserFS on your root (<tt>/</tt>) filesystem, you can use the EFI drivers to read your kernel from it. If you use ext4fs on your root (<tt>/</tt>) filesystem, you can use the ext4fs driver rather than a separate <tt>/boot</tt> partition. Note that this assumes you use conventional partitions; to the best of my knowledge, there's no EFI driver for Linux's Logical Volume Manager (LVM) or Redundant Array of Independent Disks (RAID) configurations, so the EFI can't access filesystems stored in these ways.</p>
+<p>I've tested several of the drivers described on this page on a handful of systems. The Pfisterer ext2fs driver (from any source) works on both ext2fs and ext3fs, but not on ext4fs—but Agner's derivative ext4fs driver handles ext4fs, so that's not a problem. The ReiserFS driver is obviously useful only on ReiserFS partitions. (Reiser4 is not supported, as far as I know.) Given that ext2fs, ext3fs, and ReiserFS are getting a bit on in age by Linux standards, you might do well to use them on a separate Linux <tt>/boot</tt> partition; however, if you're willing to use ext3fs, ext4fs, or ReiserFS on your root (<tt>/</tt>) filesystem, you can use the EFI drivers to read your kernel from it. Note that this assumes you use conventional partitions; to the best of my knowledge, there's no EFI driver for Linux's Logical Volume Manager (LVM) or Redundant Array of Independent Disks (RAID) configurations, so the EFI can't access filesystems stored in these ways.</p>
<p>The Pfisterer ReiserFS and ext2fs drivers work, but they are a bit sluggish—particularly the ext2fs driver. The Agner ext4fs driver, when handling an actual ext4 filesystem, is in-between these two drivers in speed. The extent of the problem depends on the computer. In my tests so far, VirtualBox has fared the worst. On it, loading a Linux kernel with EFI stub loader from a FAT partition takes 2 seconds, from the moment of selecting the OS in rEFInd to the moment the kernel messages begin to appear. The equivalent time using ReiserFS or HFS+ is 20 seconds, with ext4fs it's 75 seconds, and with ext2fs it's 200 seconds (that is, 3 minutes and 20 seconds). On a 32-bit Mac Mini, though, the speed problem is much less pronounced—my kernel loads in just 3 seconds from a ReiserFS partition and in 13 seconds from an ext2 filesystem. Speeds were similar with my newest computer, an ASUS P8H77-I board. Times with ext2fs on a UEFI PC with an Intel motherboard are in the 2–4 second range. If you try the ext2fs driver and it seems to hang, be patient; it may finally boot up. If so, and if the delay is too great for you to accept, you might consider using ext4fs or ReiserFS instead of ext2fs or ext3fs, at least if a change is practical. (For a <tt>/boot</tt> partition, it almost certainly is practical; you can back it up quite easily, create a fresh filesystem on it, and restore it. You may need to adjust your <tt>/etc/fstab</tt> entry for a new UUID value, though. As noted earlier, be sure to use <tt>notail</tt> as an option in <tt>/etc/fstab</tt> for ReiserFS if you want to read it from EFI.) You can even use HFS+ on a Linux <tt>/boot</tt> partition, although this makes the most sense on a Mac, which has its own EFI HFS+ driver. Of course, you can also create a FAT <tt>/boot</tt> partition and not deal with drivers at all. Mounting your ESP at <tt>/boot</tt> is a practical solution for many users.</p>