#
# Usage:
#
-# ./install.sh [esp]
+# ./install.sh [options]
+#
+# options include:
+# "--esp" to install to the ESP rather than to the system's root
+# filesystem. This is the default on Linux
+# "--usedefault {devicefile}" to install as default
+# (/EFI/BOOT/BOOTX64.EFI and similar) to the specified device
+# (/dev/sdd1 or whatever) without registering with the NVRAM.
+# "--alldrivers" to install all drivers along with regular files
+# "--nodrivers" to suppress driver installation (default in Linux is
+# driver used on /boot; --nodrivers is OS X default)
+# "--shim {shimfile}" to install a shim.efi file for Secure Boot
+# "--localkeys" to re-sign x86-64 binaries with a locally-generated key
#
# The "esp" option is valid only on Mac OS X; it causes
# installation to the EFI System Partition (ESP) rather than
#
# Revision history:
#
+# 0.6.4 -- Copies ext2 driver rather than ext4 driver for ext2/3fs
+# 0.6.3 -- Support for detecting rEFInd in EFI/BOOT and EFI/Microsoft/Boot
+# directories & for installing to EFI/BOOT in BIOS mode
+# 0.6.2-1 -- Added --yes option & tweaked key-copying for use with RPM install script
+# 0.6.1 -- Added --root option; minor bug fixes
+# 0.6.0 -- Changed --drivers to --alldrivers and added --nodrivers option;
+# changed default driver installation behavior in Linux to install
+# the driver needed to read /boot (if available)
+# 0.5.1.2 -- Fixed bug that caused failure to generate refind_linux.conf file
+# 0.5.1.1 -- Fixed bug that caused script failure under OS X
+# 0.5.1 -- Added --shim & --localkeys options & create sample refind_linux.conf
+# in /boot
+# 0.5.0 -- Added --usedefault & --drivers options & changed "esp" option to "--esp"
+# 0.4.5 -- Fixed check for rEFItBlesser in OS X
# 0.4.2 -- Added notice about BIOS-based OSes & made NVRAM changes in Linux smarter
# 0.4.1 -- Added check for rEFItBlesser in OS X
# 0.3.3.1 -- Fixed OS X 10.7 bug; also works as make target
# Note: install.sh version numbers match those of the rEFInd package
# with which they first appeared.
+RootDir="/"
TargetDir=/EFI/refind
+LocalKeysBase="refind_local"
+ShimSource="none"
+TargetShim="default"
+TargetX64="refind_x64.efi"
+TargetIA32="refind_ia32.efi"
+LocalKeys=0
+DeleteRefindDir=0
+AlwaysYes=0
#
# Functions used by both OS X and Linux....
#
+GetParams() {
+ InstallToEspOnMac=0
+ if [[ $OSName == "Linux" ]] ; then
+ # Install the driver required to read /boot, if it's available
+ InstallDrivers="boot"
+ else
+ InstallDrivers="none"
+ fi
+ while [[ $# -gt 0 ]]; do
+ case $1 in
+ --esp | --ESP) InstallToEspOnMac=1
+ ;;
+ --usedefault) TargetDir=/EFI/BOOT
+ TargetPart=$2
+ TargetX64="bootx64.efi"
+ TargetIA32="bootia32.efi"
+ shift
+ ;;
+ --root) RootDir=$2
+ shift
+ ;;
+ --localkeys) LocalKeys=1
+ ;;
+ --shim) ShimSource=$2
+ shift
+ ;;
+ --drivers | --alldrivers) InstallDrivers="all"
+ ;;
+ --nodrivers) InstallDrivers="none"
+ ;;
+ --yes) AlwaysYes=1
+ ;;
+ * ) echo "Usage: $0 [--esp | --usedefault {device-file} | --root {directory} ]"
+ echo " [--nodrivers | --alldrivers] [--shim {shim-filename}]"
+ echo " [--localkeys] [--yes]"
+ exit 1
+ esac
+ shift
+ done
+
+ if [[ $InstallToEspOnMac == 1 && $TargetDir == '/EFI/BOOT' ]] ; then
+ echo "You may use --esp OR --usedefault, but not both! Aborting!"
+ exit 1
+ fi
+ if [[ $RootDir != '/' && $TargetDir == '/EFI/BOOT' ]] ; then
+ echo "You may use --usedefault OR --root, but not both! Aborting!"
+ exit 1
+ fi
+ if [[ $RootDir != '/' && $InstallToEspOnMac == 1 ]] ; then
+ echo "You may use --root OR --esp, but not both! Aborting!"
+ exit 1
+ fi
+
+ RLConfFile="$RootDir/boot/refind_linux.conf"
+ EtcKeysDir="$RootDir/etc/refind.d/keys"
+} # GetParams()
+
+# Get a yes/no response from the user and place it in the YesNo variable.
+# If the AlwaysYes variable is set to 1, skip the user input and set "Y"
+# in the YesNo variable.
+ReadYesNo() {
+ if [[ $AlwaysYes == 1 ]] ; then
+ YesNo="Y"
+ echo "Y"
+ else
+ read YesNo
+ fi
+}
+
# Abort if the rEFInd files can't be found.
-# Also sets $ConfFile to point to the configuration file, and
-# $IconsDir to point to the icons directory
+# Also sets $ConfFile to point to the configuration file,
+# $IconsDir to point to the icons directory, and
+# $ShimSource to the source of the shim.efi file (if necessary).
CheckForFiles() {
# Note: This check is satisfied if EITHER the 32- or the 64-bit version
# is found, even on the wrong platform. This is because the platform
IconsDir=$ThisDir/icons
else
echo "The icons directory is missing! Aborting installation!"
+ exit 1
+ fi
+
+ if [[ $ShimSource != "none" ]] ; then
+ if [[ -f $ShimSource ]] ; then
+ TargetX64="grubx64.efi"
+ MokManagerSource=`dirname $ShimSource`/MokManager.efi
+ else
+ echo "The specified shim file, $ShimSource, doesn't exist!"
+ echo "Aborting installation!"
+ exit 1
+ fi
fi
} # CheckForFiles()
+# Helper for CopyRefindFiles; copies shim files (including MokManager, if it's
+# available) to target.
+CopyShimFiles() {
+ cp $ShimSource $InstallDir/$TargetDir/$TargetShim
+ if [[ $? != 0 ]] ; then
+ Problems=1
+ fi
+ if [[ -f $MokManagerSource ]] ; then
+ cp $MokManagerSource $InstallDir/$TargetDir/
+ fi
+ if [[ $? != 0 ]] ; then
+ Problems=1
+ fi
+} # CopyShimFiles()
+
+# Copy the public keys to the installation medium
+CopyKeys() {
+ if [[ $LocalKeys == 1 ]] ; then
+ mkdir -p $InstallDir/$TargetDir/keys/
+ cp $EtcKeysDir/$LocalKeysBase.cer $InstallDir/$TargetDir/keys/
+ cp $EtcKeysDir/$LocalKeysBase.crt $InstallDir/$TargetDir/keys/
+# else
+# cp $ThisDir/refind.cer $InstallDir/$TargetDir/keys/
+# cp $ThisDir/refind.crt $InstallDir/$TargetDir/keys/
+ fi
+} # CopyKeys()
+
+# Copy drivers from $RefindDir/drivers_$1 to $InstallDir/$TargetDir/drivers_$1,
+# honoring the $InstallDrivers condition. Must be passed a suitable
+# architecture code (ia32 or x64).
+CopyDrivers() {
+ if [[ $InstallDrivers == "all" ]] ; then
+ mkdir -p $InstallDir/$TargetDir/drivers_$1
+ cp $RefindDir/drivers_$1/*_$1.efi $InstallDir/$TargetDir/drivers_$1/ 2> /dev/null
+ cp $ThisDir/drivers_$1/*_$1.efi $InstallDir/$TargetDir/drivers_$1/ 2> /dev/null
+ elif [[ $InstallDrivers == "boot" && -x `which blkid` ]] ; then
+ BootPart=`df /boot | grep dev | cut -f 1 -d " "`
+ BootFS=`blkid -o export $BootPart 2> /dev/null | grep TYPE= | cut -f 2 -d =`
+ DriverType=""
+ case $BootFS in
+ ext2 | ext3) DriverType="ext2"
+ # Could use ext4, but that can create unwanted entries from symbolic
+ # links in / to /boot/vmlinuz if a separate /boot partition is used.
+ ;;
+ ext4) DriverType="ext4"
+ ;;
+ reiserfs) DriverType="reiserfs"
+ ;;
+ hfsplus) DriverType="hfs"
+ ;;
+ *) BootFS=""
+ esac
+ if [[ -n $BootFS ]] ; then
+ echo "Installing driver for $BootFS (${DriverType}_$1.efi)"
+ mkdir -p $InstallDir/$TargetDir/drivers_$1
+ cp $RefindDir/drivers_$1/${DriverType}_$1.efi $InstallDir/$TargetDir/drivers_$1/ 2> /dev/null
+ cp $ThisDir/drivers_$1/${DriverType}_$1.efi $InstallDir/$TargetDir/drivers_$1/ 2> /dev/null
+ fi
+ fi
+}
+
# Copy the rEFInd files to the ESP or OS X root partition.
# Sets Problems=1 if any critical commands fail.
CopyRefindFiles() {
- mkdir -p $InstallPart/$TargetDir &> /dev/null
- if [[ $Platform == 'EFI32' ]] ; then
- cp $RefindDir/refind_ia32.efi $InstallPart/$TargetDir
+ mkdir -p $InstallDir/$TargetDir
+ if [[ $TargetDir == '/EFI/BOOT' ]] ; then
+ cp $RefindDir/refind_ia32.efi $InstallDir/$TargetDir/$TargetIA32 2> /dev/null
+ if [[ $? != 0 ]] ; then
+ echo "Note: IA32 (x86) binary not installed!"
+ fi
+ cp $RefindDir/refind_x64.efi $InstallDir/$TargetDir/$TargetX64 2> /dev/null
if [[ $? != 0 ]] ; then
Problems=1
fi
- Refind="refind_ia32.efi"
- elif [[ $Platform == 'EFI64' ]] ; then
- cp $RefindDir/refind_x64.efi $InstallPart/$TargetDir
+ if [[ $ShimSource != "none" ]] ; then
+ TargetShim="bootx64.efi"
+ CopyShimFiles
+ fi
+ if [[ $InstallDrivers == "all" ]] ; then
+ cp -r $RefindDir/drivers_* $InstallDir/$TargetDir/ 2> /dev/null
+ cp -r $ThisDir/drivers_* $InstallDir/$TargetDir/ 2> /dev/null
+ fi
+ Refind=""
+ CopyKeys
+ elif [[ $Platform == 'EFI64' || $TargetDir == "/EFI/Microsoft/Boot" ]] ; then
+ cp $RefindDir/refind_x64.efi $InstallDir/$TargetDir/$TargetX64
if [[ $? != 0 ]] ; then
Problems=1
fi
+ CopyDrivers x64
Refind="refind_x64.efi"
+ CopyKeys
+ if [[ $ShimSource != "none" ]] ; then
+ if [[ $TargetShim == "default" ]] ; then
+ TargetShim=`basename $ShimSource`
+ fi
+ CopyShimFiles
+ Refind=$TargetShim
+ if [[ $LocalKeys == 0 ]] ; then
+ echo "Storing copies of rEFInd Secure Boot public keys in $EtcKeysDir"
+ mkdir -p $EtcKeysDir
+ cp $ThisDir/keys/refind.cer $EtcKeysDir 2> /dev/null
+ cp $ThisDir/keys/refind.crt $EtcKeysDir 2> /dev/null
+ fi
+ fi
+ elif [[ $Platform == 'EFI32' ]] ; then
+ cp $RefindDir/refind_ia32.efi $InstallDir/$TargetDir/$TargetIA32
+ if [[ $? != 0 ]] ; then
+ Problems=1
+ fi
+ CopyDrivers ia32
+ Refind="refind_ia32.efi"
else
echo "Unknown platform! Aborting!"
exit 1
fi
- echo "Copied rEFInd binary file $Refind"
+ echo "Copied rEFInd binary files"
echo ""
- if [[ -d $InstallPart/$TargetDir/icons ]] ; then
- rm -rf $InstallPart/$TargetDir/icons-backup &> /dev/null
- mv -f $InstallPart/$TargetDir/icons $InstallPart/$TargetDir/icons-backup
+ if [[ -d $InstallDir/$TargetDir/icons ]] ; then
+ rm -rf $InstallDir/$TargetDir/icons-backup &> /dev/null
+ mv -f $InstallDir/$TargetDir/icons $InstallDir/$TargetDir/icons-backup
echo "Notice: Backed up existing icons directory as icons-backup."
fi
- cp -r $IconsDir $InstallPart/$TargetDir
+ cp -r $IconsDir $InstallDir/$TargetDir
if [[ $? != 0 ]] ; then
Problems=1
fi
- if [[ -f $InstallPart/$TargetDir/refind.conf ]] ; then
+ mkdir -p $InstallDir/$TargetDir/keys
+ cp -rf $ThisDir/keys/*.[cd]er $InstallDir/$TargetDir/keys/ 2> /dev/null
+ cp -rf $EtcKeysDir/*.[cd]er $InstallDir/$TargetDir/keys/ 2> /dev/null
+ if [[ -f $InstallDir/$TargetDir/refind.conf ]] ; then
echo "Existing refind.conf file found; copying sample file as refind.conf-sample"
- echo "to avoid collision."
+ echo "to avoid overwriting your customizations."
echo ""
- cp -f $ConfFile $InstallPart/$TargetDir
+ cp -f $ConfFile $InstallDir/$TargetDir
if [[ $? != 0 ]] ; then
Problems=1
fi
echo "Copying sample configuration file as refind.conf; edit this file to configure"
echo "rEFInd."
echo ""
- cp -f $ConfFile $InstallPart/$TargetDir/refind.conf
+ cp -f $ConfFile $InstallDir/$TargetDir/refind.conf
if [[ $? != 0 ]] ; then
Problems=1
fi
fi
+ if [[ $DeleteRefindDir == 1 ]] ; then
+ echo "Deleting the temporary directory $RefindDir"
+ rm -r $RefindDir
+ fi
} # CopyRefindFiles()
+# Mount the partition the user specified with the --usedefault option
+MountDefaultTarget() {
+ InstallDir=/tmp/refind_install
+ mkdir -p $InstallDir
+ if [[ $OSName == 'Darwin' ]] ; then
+ mount -t msdos $TargetPart $InstallDir
+ elif [[ $OSName == 'Linux' ]] ; then
+ mount -t vfat $TargetPart $InstallDir
+ fi
+ if [[ $? != 0 ]] ; then
+ echo "Couldn't mount $TargetPart ! Aborting!"
+ rmdir $InstallDir
+ exit 1
+ fi
+ UnmountEsp=1
+} # MountDefaultTarget()
#
# A series of OS X support functions....
# Mount the ESP at /Volumes/ESP or determine its current mount
# point.
-# Sets InstallPart to the ESP mount point
+# Sets InstallDir to the ESP mount point
# Sets UnmountEsp if we mounted it
MountOSXESP() {
# Identify the ESP. Note: This returns the FIRST ESP found;
# if the system has multiple disks, this could be wrong!
- Temp=`diskutil list | grep EFI`
+ Temp=`diskutil list | grep " EFI "`
Esp=/dev/`echo $Temp | cut -f 5 -d ' '`
# If the ESP is mounted, use its current mount point....
Temp=`df | grep $Esp`
- InstallPart=`echo $Temp | cut -f 6 -d ' '`
- if [[ $InstallPart == '' ]] ; then
+ InstallDir=`echo $Temp | cut -f 6 -d ' '`
+ if [[ $InstallDir == '' ]] ; then
mkdir /Volumes/ESP &> /dev/null
mount -t msdos $Esp /Volumes/ESP
if [[ $? != 0 ]] ; then
exit 1
fi
UnmountEsp=1
- InstallPart="/Volumes/ESP"
+ InstallDir="/Volumes/ESP"
fi
} # MountOSXESP()
# Sets Problems=1 if problems found during the installation.
InstallOnOSX() {
echo "Installing rEFInd on OS X...."
- if [[ $1 == 'esp' || $1 == 'ESP' ]] ; then
+ if [[ $TargetDir == "/EFI/BOOT" ]] ; then
+ MountDefaultTarget
+ elif [[ $InstallToEspOnMac == "1" ]] ; then
MountOSXESP
else
- InstallPart="/"
+ InstallDir="$RootDir/"
fi
- echo "Installing rEFInd to the partition mounted at '$InstallPart'"
+ echo "Installing rEFInd to the partition mounted at '$InstallDir'"
Platform=`ioreg -l -p IODeviceTree | grep firmware-abi | cut -d "\"" -f 4`
CopyRefindFiles
- if [[ $1 == 'esp' || $1 == 'ESP' ]] ; then
- bless --mount $InstallPart --setBoot --file $InstallPart/$TargetDir/$Refind
- else
- bless --setBoot --folder $InstallPart/$TargetDir --file $InstallPart/$TargetDir/$Refind
+ if [[ $InstallToEspOnMac == "1" ]] ; then
+ bless --mount $InstallDir --setBoot --file $InstallDir/$TargetDir/$Refind
+ elif [[ $TargetDir != "/EFI/BOOT" ]] ; then
+ bless --setBoot --folder $InstallDir/$TargetDir --file $InstallDir/$TargetDir/$Refind
fi
if [[ $? != 0 ]] ; then
Problems=1
fi
- if [[ -f /Library/StartupItems/rEFItBlesser ]] ; then
+ if [[ -f /Library/StartupItems/rEFItBlesser || -d /Library/StartupItems/rEFItBlesser ]] ; then
echo
- echo "/Library/StartupItems/rEFItBlesser file found!"
+ echo "/Library/StartupItems/rEFItBlesser found!"
echo "This program is part of rEFIt, and will cause rEFInd to fail to work after"
echo -n "its first boot. Do you want to remove rEFItBlesser (Y/N)? "
- read YesNo
+ ReadYesNo
if [[ $YesNo == "Y" || $YesNo == "y" ]] ; then
echo "Deleting /Library/StartupItems/rEFItBlesser..."
- rm /Library/StartupItems/rEFItBlesser
+ rm -r /Library/StartupItems/rEFItBlesser
else
echo "Not deleting rEFItBlesser."
fi
echo "bless status with 'bless --info', since this is known to cause disk corruption"
echo "on some systems!!"
echo
- echo "NOTE: If you want to boot an OS via BIOS emulation (such as Windows or some"
- echo "Linux installations), you *MUST* edit the $InstallPart/$TargetDir/refind.conf"
- echo "file's 'scanfor' line to include the 'hdbios' option, and perhaps"
- echo "'biosexternal' and 'cd', as well."
- echo
} # InstallOnOSX()
# Now a series of Linux support functions....
#
-# Identifies the ESP's location (/boot or /boot/efi); aborts if
-# the ESP isn't mounted at either location.
-# Sets InstallPart to the ESP mount point.
+# Check for evidence that we're running in Secure Boot mode. If so, and if
+# appropriate options haven't been set, warn the user and offer to abort.
+# If we're NOT in Secure Boot mode but the user HAS specified the --shim
+# or --localkeys option, warn the user and offer to abort.
+#
+# FIXME: Although I checked the presence (and lack thereof) of the
+# /sys/firmware/efi/vars/SecureBoot* files on my Secure Boot test system
+# before releasing this script, I've since found that they are at least
+# sometimes present when Secure Boot is absent. This means that the first
+# test can produce false alarms. A better test is highly desirable.
+CheckSecureBoot() {
+ VarFile=`ls -d /sys/firmware/efi/vars/SecureBoot* 2> /dev/null`
+ if [[ -n $VarFile && $TargetDir != '/EFI/BOOT' && $ShimSource == "none" ]] ; then
+ echo ""
+ echo "CAUTION: Your computer appears to support Secure Boot, but you haven't"
+ echo "specified a valid shim.efi file source. If you've disabled Secure Boot and"
+ echo "intend to leave it disabled, this is fine; but if Secure Boot is active, the"
+ echo "resulting installation won't boot. You can read more about this topic at"
+ echo "http://www.rodsbooks.com/refind/secureboot.html."
+ echo ""
+ echo -n "Do you want to proceed with installation (Y/N)? "
+ ReadYesNo
+ if [[ $YesNo == "Y" || $YesNo == "y" ]] ; then
+ echo "OK; continuing with the installation..."
+ else
+ exit 0
+ fi
+ fi
+
+ if [[ $ShimSource != "none" && ! -n $VarFile ]] ; then
+ echo ""
+ echo "You've specified installing using a shim.efi file, but your computer does not"
+ echo "appear to be running in Secure Boot mode. Although installing in this way"
+ echo "should work, it's unnecessarily complex. You may continue, but unless you"
+ echo "plan to enable Secure Boot, you should consider stopping and omitting the"
+ echo "--shim option. You can read more about this topic at"
+ echo "http://www.rodsbooks.com/refind/secureboot.html."
+ echo ""
+ echo -n "Do you want to proceed with installation (Y/N)? "
+ ReadYesNo
+ if [[ $YesNo == "Y" || $YesNo == "y" ]] ; then
+ echo "OK; continuing with the installation..."
+ else
+ exit 0
+ fi
+ fi
+
+ if [[ $LocalKeys != 0 && ! -n $VarFile ]] ; then
+ echo ""
+ echo "You've specified re-signing your rEFInd binaries with locally-generated keys,"
+ echo "but your computer does not appear to be running in Secure Boot mode. The"
+ echo "keys you generate will be useless unless you enable Secure Boot. You may"
+ echo "proceed with this installation, but before you do so, you may want to read"
+ echo "more about it at http://www.rodsbooks.com/refind/secureboot.html."
+ echo ""
+ echo -n "Do you want to proceed with installation (Y/N)? "
+ ReadYesNo
+ if [[ $YesNo == "Y" || $YesNo == "y" ]] ; then
+ echo "OK; continuing with the installation..."
+ else
+ exit 0
+ fi
+ fi
+
+} # CheckSecureBoot()
+
+# Check for the presence of locally-generated keys from a previous installation in
+# $EtcKeysDir (/etc/refind.d/keys). If they're not present, generate them using
+# openssl.
+GenerateKeys() {
+ PrivateKey=$EtcKeysDir/$LocalKeysBase.key
+ CertKey=$EtcKeysDir/$LocalKeysBase.crt
+ DerKey=$EtcKeysDir/$LocalKeysBase.cer
+ OpenSSL=`which openssl 2> /dev/null`
+
+ # Do the work only if one or more of the necessary keys is missing
+ # TODO: Technically, we don't need the DerKey; but if it's missing and openssl
+ # is also missing, this will fail. This could be improved.
+ if [[ ! -f $PrivateKey || ! -f $CertKey || ! -f $DerKey ]] ; then
+ echo "Generating a fresh set of local keys...."
+ mkdir -p $EtcKeysDir
+ chmod 0700 $EtcKeysDir
+ if [[ ! -x $OpenSSL ]] ; then
+ echo "Can't find openssl, which is required to create your private signing keys!"
+ echo "Aborting!"
+ exit 1
+ fi
+ if [[ -f $PrivateKey ]] ; then
+ echo "Backing up existing $PrivateKey"
+ cp -f $PrivateKey $PrivateKey.backup 2> /dev/null
+ fi
+ if [[ -f $CertKey ]] ; then
+ echo "Backing up existing $CertKey"
+ cp -f $CertKey $CertKey.backup 2> /dev/null
+ fi
+ if [[ -f $DerKey ]] ; then
+ echo "Backing up existing $DerKey"
+ cp -f $DerKey $DerKey.backup 2> /dev/null
+ fi
+ $OpenSSL req -new -x509 -newkey rsa:2048 -keyout $PrivateKey -out $CertKey \
+ -nodes -days 3650 -subj "/CN=Locally-generated rEFInd key/"
+ $OpenSSL x509 -in $CertKey -out $DerKey -outform DER
+ chmod 0600 $PrivateKey
+ else
+ echo "Using existing local keys...."
+ fi
+}
+
+# Sign a single binary. Requires parameters:
+# $1 = source file
+# $2 = destination file
+# Also assumes that the SBSign, PESign, UseSBSign, UsePESign, and various key variables are set
+# appropriately.
+# Aborts script on error
+SignOneBinary() {
+ $SBSign --key $PrivateKey --cert $CertKey --output $2 $1
+ if [[ $? != 0 ]] ; then
+ echo "Problem signing the binary $1! Aborting!"
+ exit 1
+ fi
+}
+
+# Re-sign the x86-64 binaries with a locally-generated key, First look for appropriate
+# key files in $EtcKeysDir. If they're present, use them to re-sign the binaries. If
+# not, try to generate new keys and store them in $EtcKeysDir.
+ReSignBinaries() {
+ SBSign=`which sbsign 2> /dev/null`
+ echo "Found sbsign at $SBSign"
+ TempDir="/tmp/refind_local"
+ if [[ ! -x $SBSign ]] ; then
+ echo "Can't find sbsign, which is required to sign rEFInd with your own keys!"
+ echo "Aborting!"
+ exit 1
+ fi
+ GenerateKeys
+ mkdir -p $TempDir/drivers_x64
+ cp $RefindDir/refind.conf-sample $TempDir 2> /dev/null
+ cp $ThisDir/refind.conf-sample $TempDir 2> /dev/null
+ cp $RefindDir/refind_ia32.efi $TempDir 2> /dev/null
+ cp -a $RefindDir/drivers_ia32 $TempDir 2> /dev/null
+ cp -a $ThisDir/drivers_ia32 $TempDir 2> /dev/null
+ SignOneBinary $RefindDir/refind_x64.efi $TempDir/refind_x64.efi
+ for Driver in `ls $RefindDir/drivers_x64/*.efi $ThisDir/drivers_x64/*.efi 2> /dev/null` ; do
+ TempName=`basename $Driver`
+ SignOneBinary $Driver $TempDir/drivers_x64/$TempName
+ done
+ RefindDir=$TempDir
+ DeleteRefindDir=1
+}
+
+# Identifies the ESP's location (/boot or /boot/efi, or these locations under
+# the directory specified by --root); aborts if the ESP isn't mounted at
+# either location.
+# Sets InstallDir to the ESP mount point.
FindLinuxESP() {
- EspLine=`df /boot/efi | grep boot`
- InstallPart=`echo $EspLine | cut -d " " -f 6`
- EspFilesystem=`grep $InstallPart /etc/mtab | cut -d " " -f 3`
+ EspLine=`df $RootDir/boot/efi 2> /dev/null | grep boot/efi`
+ if [[ ! -n $EspLine ]] ; then
+ EspLine=`df $RootDir/boot | grep boot`
+ fi
+ InstallDir=`echo $EspLine | cut -d " " -f 6`
+ if [[ -n $InstallDir ]] ; then
+ EspFilesystem=`grep $InstallDir /etc/mtab | cut -d " " -f 3`
+ fi
if [[ $EspFilesystem != 'vfat' ]] ; then
- echo "/boot/efi doesn't seem to be on a VFAT filesystem. The ESP must be mounted at"
- echo "/boot or /boot/efi and it must be VFAT! Aborting!"
+ echo "$RootDir/boot/efi doesn't seem to be on a VFAT filesystem. The ESP must be"
+ echo "mounted at $RootDir/boot or $RootDir/boot/efi and it must be VFAT! Aborting!"
exit 1
fi
- echo "ESP was found at $InstallPart using $EspFilesystem"
-} # MountLinuxESP
+ echo "ESP was found at $InstallDir using $EspFilesystem"
+} # FindLinuxESP
# Uses efibootmgr to add an entry for rEFInd to the EFI's NVRAM.
# If this fails, sets Problems=1
InstallIt="0"
Efibootmgr=`which efibootmgr 2> /dev/null`
if [[ $Efibootmgr ]] ; then
- modprobe efivars &> /dev/null
- InstallDisk=`grep $InstallPart /etc/mtab | cut -d " " -f 1 | cut -c 1-8`
- PartNum=`grep $InstallPart /etc/mtab | cut -d " " -f 1 | cut -c 9-10`
+ InstallDisk=`grep $InstallDir /etc/mtab | cut -d " " -f 1 | cut -c 1-8`
+ PartNum=`grep $InstallDir /etc/mtab | cut -d " " -f 1 | cut -c 9-10`
EntryFilename=$TargetDir/$Refind
EfiEntryFilename=`echo ${EntryFilename//\//\\\}`
EfiEntryFilename2=`echo ${EfiEntryFilename} | sed s/\\\\\\\\/\\\\\\\\\\\\\\\\/g`
- ExistingEntry=`$Efibootmgr -v | grep $EfiEntryFilename2`
+ ExistingEntry=`$Efibootmgr -v | grep -i $EfiEntryFilename2`
+
if [[ $ExistingEntry ]] ; then
ExistingEntryBootNum=`echo $ExistingEntry | cut -c 5-8`
FirstBoot=`$Efibootmgr | grep BootOrder | cut -c 12-15`
echo "manager. If this is NOT what you want, you should use efibootmgr to"
echo "manually adjust your EFI's boot order."
$Efibootmgr -b $ExistingEntryBootNum -B &> /dev/null
- InstallIt="1"
+ InstallIt="1"
fi
else
InstallIt="1"
fi
+
if [[ $InstallIt == "1" ]] ; then
echo "Installing it!"
- $Efibootmgr -c -l $EfiEntryFilename -L rEFInd -d $InstallDisk -p $PartNum &> /dev/null
+ $Efibootmgr -c -l $EfiEntryFilename -L "rEFInd Boot Manager" -d $InstallDisk -p $PartNum &> /dev/null
if [[ $? != 0 ]] ; then
EfibootmgrProblems=1
Problems=1
fi
fi
- else
+
+ else # efibootmgr not found
EfibootmgrProblems=1
Problems=1
fi
+
if [[ $EfibootmgrProblems ]] ; then
echo
echo "ALERT: There were problems running the efibootmgr program! You may need to"
fi
} # AddBootEntry()
+# Create a minimal/sample refind_linux.conf file in /boot.
+GenerateRefindLinuxConf() {
+ if [[ -f $RLConfFile ]] ; then
+ echo "Existing $RLConfFile found; not overwriting."
+ else
+ if [[ -f "$RootDir/etc/default/grub" ]] ; then
+ # We want the default options used by the distribution, stored here....
+ source "$RootDir/etc/default/grub"
+ fi
+ RootFS=`df $RootDir | grep dev | cut -f 1 -d " "`
+ StartOfDevname=`echo $RootFS | cut -b 1-7`
+ if [[ $StartOfDevname == "/dev/sd" || $StartOfDevName == "/dev/hd" ]] ; then
+ # Identify root filesystem by UUID rather than by device node, if possible
+ Uuid=`blkid -o export $RootFS 2> /dev/null | grep UUID=`
+ if [[ -n $Uuid ]] ; then
+ RootFS=$Uuid
+ fi
+ fi
+ DefaultOptions="$GRUB_CMDLINE_LINUX $GRUB_CMDLINE_LINUX_DEFAULT"
+ echo "\"Boot with standard options\" \"ro root=$RootFS $DefaultOptions \"" > $RLConfFile
+ echo "\"Boot to single-user mode\" \"ro root=$RootFS $DefaultOptions single\"" >> $RLConfFile
+ echo "\"Boot with minimal options\" \"ro root=$RootFS\"" >> $RLConfFile
+ fi
+}
+
+# Set varaibles for installation in EFI/BOOT directory
+SetVarsForBoot() {
+ TargetDir="/EFI/BOOT"
+ if [[ $ShimSource == "none" ]] ; then
+ TargetX64="bootx64.efi"
+ TargetIA32="bootia32.efi"
+ else
+ TargetX64="grubx64.efi"
+ TargetIA32="bootia32.efi"
+ TargetShim="bootx64.efi"
+ fi
+} # SetFilenamesForBoot()
+
+# Set variables for installation in EFI/Microsoft/Boot directory
+SetVarsForMsBoot() {
+ TargetDir="/EFI/Microsoft/Boot"
+ if [[ $ShimSource == "none" ]] ; then
+ TargetX64="bootmgfw.efi"
+ else
+ TargetX64="grubx64.efi"
+ TargetShim="bootmgfw.efi"
+ fi
+}
+
+# TargetDir defaults to /EFI/refind; however, this function adjusts it as follows:
+# - If an existing refind.conf is available in /EFI/BOOT or /EFI/Microsoft/Boot,
+# install to that directory under the suitable name; but DO NOT do this if
+# refind.conf is also in /EFI/refind.
+# - If booted in BIOS mode and the ESP lacks any other EFI files, install to
+# /EFI/BOOT
+# - If booted in BIOS mode and there's no refind.conf file and there is a
+# /EFI/Microsoft/Boot/bootmgfw.efi file, move it down one level and
+# install under that name, "hijacking" the Windows boot loader filename
+DetermineTargetDir() {
+ Upgrade=0
+
+ if [[ -f $InstallDir/EFI/BOOT/refind.conf ]] ; then
+ SetVarsForBoot
+ Upgrade=1
+ fi
+ if [[ -f $InstallDir/EFI/Microsoft/Boot/refind.conf ]] ; then
+ SetVarsForMsBoot
+ Upgrade=1
+ fi
+ if [[ -f $InstallDir/EFI/refind/refind.conf ]] ; then
+ TargetDir="/EFI/refind"
+ Upgrade=1
+ fi
+ if [[ $Upgrade == 1 ]] ; then
+ echo "Found rEFInd installation in $InstallDir$TargetDir; upgrading it."
+ fi
+
+ if [[ ! -d /sys/firmware/efi && $Upgrade == 0 ]] ; then # BIOS-mode
+ FoundEfiFiles=`find $InstallDir/EFI/BOOT -name "*.efi" 2> /dev/null`
+ FoundConfFiles=`find $InstallDir -name "refind\.conf" 2> /dev/null`
+ if [[ ! -n $FoundConfFiles && -f $InstallDir/EFI/Microsoft/Boot/bootmgfw.efi ]] ; then
+ mv -n $InstallDir/EFI/Microsoft/Boot/bootmgfw.efi $InstallDir/EFI/Microsoft &> /dev/null
+ SetVarsForMsBoot
+ echo "Running in BIOS mode with a suspected Windows installation; moving boot loader"
+ echo "files so as to install to $InstallDir$TargetDir."
+ elif [[ ! -n $FoundEfiFiles ]] ; then # In BIOS mode and no default loader; install as default loader
+ SetVarsForBoot
+ echo "Running in BIOS mode with no existing default boot loader; installing to"
+ echo $InstallDir$TargetDir
+ else
+ echo "Running in BIOS mode with an existing default boot loader; backing it up and"
+ echo "installing rEFInd in its place."
+ if [[ -d $InstallDir/EFI/BOOT-rEFIndBackup ]] ; then
+ echo ""
+ echo "Caution: An existing backup of a default boot loader exists! If the current"
+ echo "default boot loader and the backup are different boot loaders, the current"
+ echo "one will become inaccessible."
+ echo ""
+ echo -n "Do you want to proceed with installation (Y/N)? "
+ ReadYesNo
+ if [[ $YesNo == "Y" || $YesNo == "y" ]] ; then
+ echo "OK; continuing with the installation..."
+ else
+ exit 0
+ fi
+ fi
+ mv -n $InstallDir/EFI/BOOT $InstallDir/EFI/BOOT-rEFIndBackup
+ SetVarsForBoot
+ fi
+ fi # BIOS-mode
+} # DetermineTargetDir()
+
# Controls rEFInd installation under Linux.
# Sets Problems=1 if something goes wrong.
InstallOnLinux() {
echo "Installing rEFInd on Linux...."
- FindLinuxESP
+ modprobe efivars &> /dev/null
+ if [[ $TargetDir == "/EFI/BOOT" ]] ; then
+ MountDefaultTarget
+ else
+ FindLinuxESP
+ DetermineTargetDir
+ fi
CpuType=`uname -m`
if [[ $CpuType == 'x86_64' ]] ; then
Platform="EFI64"
- elif [[ $CpuType == 'i386' || $CpuType == 'i486' || $CpuType == 'i586' || $CpuType == 'i686' ]] ; then
+ elif [[ ($CpuType == 'i386' || $CpuType == 'i486' || $CpuType == 'i586' || $CpuType == 'i686') ]] ; then
Platform="EFI32"
- echo
- echo "CAUTION: This Linux installation uses a 32-bit kernel. 32-bit EFI-based"
- echo "computers are VERY RARE. If you've installed a 32-bit version of Linux"
- echo "on a 64-bit computer, you should manually install the 64-bit version of"
- echo "rEFInd. If you're installing on a Mac, you should do so from OS X. If"
- echo "you're positive you want to continue with this installation, answer 'Y'"
- echo "to the following question..."
- echo
- echo -n "Are you sure you want to continue (Y/N)? "
- read ContYN
- if [[ $ContYN == "Y" || $ContYN == "y" ]] ; then
- echo "OK; continuing with the installation..."
- else
- exit 0
- fi
+ # If we're in EFI mode, do some sanity checks, and alert the user or even
+ # abort. Not in BIOS mode, though, since that could be used on an emergency
+ # disc to try to recover a troubled Linux installation.
+ if [[ -d /sys/firmware/efi ]] ; then
+ if [[ $ShimSource != "none" && $TargetDir != "/BOOT/EFI" ]] ; then
+ echo ""
+ echo "CAUTION: Neither rEFInd nor shim currently supports 32-bit systems, so you"
+ echo "should not use the --shim option to install on such systems. Aborting!"
+ echo ""
+ exit 1
+ fi
+ echo
+ echo "CAUTION: This Linux installation uses a 32-bit kernel. 32-bit EFI-based"
+ echo "computers are VERY RARE. If you've installed a 32-bit version of Linux"
+ echo "on a 64-bit computer, you should manually install the 64-bit version of"
+ echo "rEFInd. If you're installing on a Mac, you should do so from OS X. If"
+ echo "you're positive you want to continue with this installation, answer 'Y'"
+ echo "to the following question..."
+ echo
+ echo -n "Are you sure you want to continue (Y/N)? "
+ ReadYesNo
+ if [[ $YesNo == "Y" || $YesNo == "y" ]] ; then
+ echo "OK; continuing with the installation..."
+ else
+ exit 0
+ fi
+ fi # in EFI mode
else
echo "Unknown CPU type '$CpuType'; aborting!"
exit 1
fi
+
+ if [[ $LocalKeys == 1 ]] ; then
+ ReSignBinaries
+ fi
+
+ CheckSecureBoot
CopyRefindFiles
- AddBootEntry
+ if [[ $TargetDir != "/EFI/BOOT" && $TargetDir != "/EFI/Microsoft/Boot" ]] ; then
+ AddBootEntry
+ GenerateRefindLinuxConf
+ fi
} # InstallOnLinux()
#
#
OSName=`uname -s`
+GetParams $@
ThisDir="$( cd -P "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
RefindDir="$ThisDir/refind"
ThisScript="$ThisDir/`basename $0`"
-CheckForFiles
if [[ `whoami` != "root" ]] ; then
echo "Not running as root; attempting to elevate privileges via sudo...."
- sudo $ThisScript $1
+ sudo $ThisScript "$@"
if [[ $? != 0 ]] ; then
echo "This script must be run as root (or using sudo). Exiting!"
exit 1
exit 0
fi
fi
+CheckForFiles
if [[ $OSName == 'Darwin' ]] ; then
+ if [[ $ShimSource != "none" ]] ; then
+ echo "The --shim option is not supported on OS X! Exiting!"
+ exit 1
+ fi
+ if [[ $LocalKeys != 0 ]] ; then
+ echo "The --localkeys option is not supported on OS X! Exiting!"
+ exit 1
+ fi
InstallOnOSX $1
elif [[ $OSName == 'Linux' ]] ; then
InstallOnLinux
fi
if [[ $UnmountEsp ]] ; then
- umount $InstallPart
+ echo "Unmounting install dir"
+ umount $InstallDir
+fi
+
+if [[ $InstallDir == /tmp/refind_install ]] ; then
+# sleep 5
+ rmdir $InstallDir
fi