-0.6.10 (?/??/2013):
+0.8.1 (5/??/2014):
+------------------
+
+- Added two new bitmap fonts to those distributed with rEFInd: Ubuntu Mono
+ and Nimbus Mono. Both come in 12-, 14-, 16-, and 24-point sizes.
+
+- Messages about pauses for scanning and re-scanning of boot loaders are
+ now suppressed when doing an initial delayed scan when scan_delay is 1
+ second.
+
+- Improved centering of legacy boot option descriptions on some systems'
+ screens.
+
+- Fixed bug that could cause a BIOS-mode boot to launch an inappropriate
+ device if that device had an innately high boot priority (as set by the
+ firmware).
+
+- Changed icons from ICNS to PNG form. There are several reasons to do
+ this, all of them minor; but together they're enough to warrant a change.
+ PNG is more common, and therefore more accessible to most users --
+ particularly those who don't use OS X. The PNG files are smaller than
+ their ICNS equivalents. PNG supports a wider range of sizes (although I'm
+ not now using anything that ICNS doesn't support, I might in the future).
+ The icon-scaling support added a few versions ago makes ICNS's support
+ for multiple icon sizes relatively unimportant.
+
+- Reversed order of search for icons by extension: rEFInd now searches
+ for PNG files before ICNS files, rather than the other way around. This
+ makes it possible to override a volume icon for rEFInd by giving it the
+ name .VolumeIcon.png, even when a .VolumeIcon.icns file exists on the
+ volume and is used by OS X.
+
+- Fixed bug that caused .VolumeIcon.icns to take higher-than-intended
+ precedence in icon setting for OS X.
+
+- Chainloading to BIOS-mode boot loaders now works on UEFI-based PCs when
+ rEFInd is built with GNU-EFI, not just when built with Tianocore.
+
+0.8.0 (5/4/2014):
+-----------------
+
+- The "dont_scan_volumes" parameter now also works with legacy-boot
+ volumes. Unlike with EFI volumes, where the option you pass must exactly
+ match an entire volume name, when applied to legacy-boot volumes, it
+ matches any part of the description that appears beneath the item when
+ you select it in the rEFInd main menu.
+
+- Can now boot in legacy mode from second (and probably later) hard disks!
+
+- rEFInd now limits the length of the firmware name string shown in the
+ system information screen to 65 characters. This is done because at least
+ one EFI presents a longer string by default, and this causes the entire
+ information display to come up empty on 800x600 displays.
+
+- rEFInd now uses the partition's name (as stored in the GPT data
+ structures) as a fallback for the filesystem's name if the latter can't
+ be found. Exceptions are if the partition name is one of three generic
+ names used by GPT fdisk: "Microsoft basic data", "Linux filesystem", or
+ "Apple HFS/HFS+". These are ignored in favor of the descriptive fallback
+ (e.g., "20 GiB Btrfs volume")
+
+- It's now possible to specify a volume by partition GUID number in a
+ manual boot stanza. This should be more reliable (albeit also more
+ awkward) than using a filesystem number (such as fs0: or fs1:).
+
+- Fixed memory-allocation bug that could cause error message displays,
+ and possibly hangs, when re-scanning boot loaders.
+
+0.7.9 (4/20/2014):
+------------------
+
+- Attempt to fix rEFInd perpetually re-scanning after ejecting a disc on
+ some Macs.
+
+- Added check to remove redundant (or non-functional if Secure Boot is
+ active) kernel entries for Ubuntu, which is now including two versions of
+ kernels, one signed and the other unsigned.
+
+- Fixed bug in install.sh that could cause it to display error messages
+ if the dmraid utility was not installed.
+
+- The HFS+ driver now reports a correct volume name.
+
+- Fixed some EFI filesystem driver bugs that could cause lockups under
+ some circumstances. These bugs could affect any of the filesystem
+ drivers.
+
+- Added "gdisk" option to the "showtools" configuration file token. When
+ active, this adds gdisk.efi or gdisk_{arch}.efi, if present in the
+ EFI\tools directory, to the tools row.
+
+- Fixed mistaken identification of the MOK utility as the "MOK utility
+ utility."
+
+
+0.7.8 (3/9/2014):
+-----------------
+
+- Added "debian" directory to source, which facilitates creation of Debian
+ packages. Packages built in this way are built with GNU-EFI and don't run
+ any post-installation script, so although the rEFInd binaries are on the
+ hard disk, they aren't installed to be bootable; you must manually run
+ install.sh. Also, at least on Ubuntu, the Make.common file's /usr/lib64
+ references must be changed to /usr/lib. This is more of a proof of
+ concept and a "leg up" for distribution maintainers than anything else.
+
+- Two new options, big_icon_size and small_icon_size, set the size of
+ the first-row OS icons and of the second-row tool icons, respectively.
+ The big_icon_size option also indirectly sets the size of disk-type
+ badges; they're 1/4 the size of the big icons. Default values are 128 and
+ 48, respectively, to match the actual icon files provided with rEFInd. If
+ the icon you're using is of a different size than you've specified,
+ rEFInd scales it. For best quality, you should both provide icons drawn
+ to the right size and set the icon sizes in refind.conf.
+
+- rEFInd now automatically scales icons to fit the standard icon sizes.
+ This won't have any effect with the icons that come with rEFInd, but it
+ can help if you want to use another icon, since you needn't scale it in a
+ graphics program before using it. Note that rEFInd uses bitmap icons, so
+ scaling by a huge amount (say, a 16x16 icon to fit the standard 128x128
+ OS icon) is not likely to look good.
+
+- Added new option, banner_scale, that tells rEFInd how to handle banners:
+ Set to "noscale" (the default), banners are not scaled, although they'll
+ be cropped if they're too big for the display. This is the same as the
+ behavior in previous versions. Set to "fillscreen", rEFInd now scales the
+ banner image (larger or smaller) to fill the display.
+
+- Adjusted the post-installation script in refind.spec (used to generate
+ RPMs, and therefore also indirectly Debian packages) to search for
+ existing shim program files under the filesnames shim.efi and shimx64.efi
+ rather than just shim.efi. Ubuntu uses shimx64.efi, so Debian packages
+ were failing to detect Ubuntu's shim in previous versions. (Note,
+ however, that Ubuntu's early shim 0.1 is unsuitable for use with rEFInd
+ The newer 0.4 version that's in the repositories now should work fine;
+ it's only when installing on an older system that's NOT been updated that
+ problems might arise.
+
+0.7.7 (1/3/2014):
+-----------------
+
+- Can now specify complete paths, optionally including volumes, in
+ dont_scan_files.
+
+- Added shimx64.efi to the default dont_scan_files list.
+
+- Added windows_recovery_files token, to specify what program(s) launch a
+ Windows recovery utility; and the "windows_recovery" option to
+ "showtools," to control whether or not to display the Windows recovery
+ utility on the second row of icons.
+
+- The use_graphics_for, also_scan_dirs, dont_scan_dirs, dont_scan_files,
+ and scan_driver_dirs tokens in refind.conf now support "+" as the first
+ option, which causes the remaining options to be added to the default
+ value rather than replacing that value. (This has no practical effect for
+ scan_driver_dirs, though, since it has a null default value.)
+
+- Added support for specifying the configuration file at program launch,
+ via the "-c" parameter, as in "refind_x64.efi -c foo.conf" to use the
+ foo.conf file as the main configuration file.
+
+- Scans of ext2/3/4fs and ReiserFS partitions now omit partitions with
+ duplicate filesystem UUIDs. These are likely parts of RAID arrays and so
+ would have the same boot loaders or kernels as the first one with a given
+ UUID.
+
+- Added feature in install.sh: Script now tries to locate and mount an ESP
+ in Linux, if it's currently unmounted.
+
+- Fixed bug in mkrlconf.sh and install.sh that caused a stray line break
+ and PARTUUID= specification to appear in generated refind_linux.conf file
+ under some circumstances.
+
+0.7.6 (12/15/2013):
+-------------------
+
+- Added support for multiple "default_selection" targets. These MUST be
+ comma-separated AND enclosed in quotes, as in:
+ default_selection "fred,ginger"
+ This example will launch "fred" by default if it's available; and if
+ it's not, rEFInd will attempt to launch "ginger" as the default.
+
+- Added support for time-sensitive "default_selection" setting. This token
+ may now have either one or three options. If one, it's interpreted as it
+ has been in the past, as setting a default that's independent of times.
+ If you follow this default by two times, however, those are interpreted
+ as the start and end times (in 24-hour format) for a default setting. For
+ instance, "default_selection foo 8:00 17:00" causes foo to be the default
+ from 8:00 (AM) to 17:00 (aka 5:00 PM). You can include multiple
+ "default_selection" lines to set different defaults for a variety of
+ times. If they're in conflict, the last one takes precedence. Note that
+ times are hardware clock's native value, which may be local time or UTC,
+ depending on your computer.
+
+- Added support for a blank-screen startup: Set "screensaver -1" and the
+ screen saver will be initialized when rEFInd starts. If you set a low
+ "timeout" value, the result will be a boot straight to the default OS
+ unless you hit a key soon after rEFInd starts. Once you hit a key, the
+ screensaver will be disabled.
+
+- Added --ownhfs {target} option to install.sh. This option causes rEFInd
+ to install to an HFS+ partition in a way that's more consistent with the
+ way the Mac's native boot loader is installed. Note that you should NOT
+ install to an already-bootable partition with this option, since it will
+ overwrite the existing boot loader, which would render OS X unbootable.
+
+0.7.5 (11/10/2013):
-------------------
+- Fixed bug that caused unbootable exFAT partitions to show up as
+ bootable on Macs with BIOS/CSM/legacy boot options enabled.
+
+- Fixed bug in install.sh that caused installs to the ESP on recent
+ versions of OS X to fail.
+
+- Fixed bug that caused rEFInd to hang on some Macs when multiple EFI
+ drivers were present.
+
+- Fixed bug that caused clear to default gray screen when launching OSes
+ with 'use_graphics_for' enabled, even when the rEFInd background is not
+ gray. Now rEFInd clears to the same background color used in its menu.
+ When launching OS X, though, the OS X boot loader will itself clear to
+ gray a second or so later; and when launching Linux, it will clear to
+ black a second or so later.
+
+0.7.4.1 (8/25/2013):
+--------------------
+
+- My initial 0.7.4 release broke legacy-boot ability on Macs, so I quickly
+ released this version using the original 0.7.4 filenames to fix the
+ problem.
+
+0.7.4 (8/25/2013):
+------------------
+
+- Fixed options passing to loader to include loader's filename as the first
+ option. This omission had no effect on most boot loaders, but caused
+ VMware's mboot64.efi to fail.
+
+- Added support for memtest86 as second-row option. Program must be
+ stored in EFI/tools, EFI/tools/memtest, EFI/tools/memtest86, EFI/memtest,
+ or EFI/memtest86; and must use the name memtest86.efi, memtest86_x64.efi,
+ memtest86x64.efi, or bootx64.efi (changing "x64" to "ia32" on IA-32
+ systems). The memtest86 program is scanned for when the "showtools"
+ option includes the "memtest" or "memtest86" token, which it does by
+ default.
+
+- Added space to end of "Boot %s from %s" string; enables adding a space
+ to the end of the "default_selection" item (in quotes) to set a default
+ that matches a volume name that's identical to another one except for
+ extra characters at the end of the non-wanted volume's name.
+
+- Fixed bug that could cause rEFInd to hang when launching boot loaders
+ under some conditions. (Launching from Firewire drives on Macs is the
+ known case, but there may be others.)
+
+0.7.3 (8/7/2013):
+-----------------
+
+- Fixed bug that caused missing media-type badges on BIOS-mode boot
+ loaders on Macs.
+
+- Fixed bug that caused failure when launching BIOS-mode OSes on Macs.
+
+0.7.2 (8/6/2013):
+-----------------
+
+- Fixed bug that caused display glitches in the final entry on the first
+ row of icons if the second row of icons was empty.
+
+- Fixed bug that could cause incorrect scanning or even a rEFInd crash when
+ using volume specification in also_scan_dirs token.
+
+- Added protection against loading invalid drivers and other EFI programs.
+ (Some EFIs crash when attempting to load such drivers and programs.)
+
+- Added PreLoader.efi and shim-fedora.efi to default dont_scan_files list;
+ it's now "shim.efi, shim-fedora.efi, PreLoader.efi, TextMode.efi,
+ ebounce.efi, GraphicsConsole.efi, MokManager.efi, HashTool.efi,
+ HashTool-signed.efi".
+
+- Added icon for Funtoo Linux.
+
+- Fixed reading of volume badges from user-specified icons directory, which
+ was broken.
+
+- Fixed handling of /.VolumeBadge.icns (or /.VolumeBadge.png) files, which
+ was broken.
+
+0.7.1 (7/8/2013):
+-----------------
+
+- Fixed build problem with recent development versions of EDK2.
+
+- Added scan for Boot Repair's backup of the Windows boot loader
+ (bkpbootmgfw.efi). If found, give separate entries for it and for
+ bootmgfw.efi, each with its own descriptive text label.
+
+- Fixed also_scan_dirs; used to have bug that caused it to ignore
+ volume specification, if present.
+
+- Fixed bug in driver cache that caused Btrfs driver to hang sometimes.
+
+0.7.0 (6/27/2013):
+------------------
+
+- Added Btrfs signature to rEFInd, so that it can identify the filesystem
+ type for volumes that lack labels.
+
+- Changed some critical filesystem driver pointers from 32-bit to 64-bit.
+ This *SHOULD* enable use of over-2TiB filesystems (for those filesystems
+ that support such large volumes). This capability is largely untested,
+ though.
+
+- Added a cache to the filesystem driver core, and therefore to all the
+ filesystem drivers. This cache greatly improves performance in
+ VirtualBox, and offers modest performance improvements on a few "real"
+ computers. The most dramatic improvement is on ext2/3fs under VirtualBox:
+ Loading a kernel and initrd used to take ~200 seconds on my system, but
+ now takes ~3 seconds! On most "real" hardware, the improvement is much
+ less dramatic -- an improvement of a second or less, presumably because
+ of cacheing within the EFI or on the hard disk itself.
+
+- Filter boot loaders based on a test of their validity; keeps out Linux
+ kernels without EFI stub loader code, loaders for the wrong architecture,
+ non-EFI loaders, etc.
+
+- New Btrfs driver, contributed by Samuel Liao based on GRUB 2.00 Btrfs
+ code.
+
+0.6.12 (6/18/2013):
+-------------------
+
+- Changed the 64-bit EFI shell included in the CD-R and USB flash drive
+ images to a version 2 shell that should support the "bcfg" command.
+
+- Added support for PreBootloader to refind.spec's built-in installation
+ script.
+
+- Added support for the Linux Foundation's PreLoader to install.sh. It's
+ treated just like shim, including using the --shim option (or, now,
+ --preloader); but it searches for and copies HashTool.efi rather than
+ MokManager.efi, and filenames are adjusted appropriately.
+
+- Added code to determine Linux root filesystem from /etc/fstab file, if
+ it's on the same partition as the kernel and if the refind_linux.conf
+ file is not available. This enables rEFInd to boot Linux without any
+ rEFInd-specific configuration files on some (but not all) systems.
+
+0.6.11 (5/13/2013):
+-------------------
+
+- New feature: rEFInd now ignores symbolic links to files on filesystems
+ that support them. This prevents the "vmlinuz" symbolic link that some
+ distributions create in the root directory from appearing in the loader
+ list. Note that this does NOT affect symbolic links to directories.
+
+- Added icons for Lubuntu and Kubuntu.
+
+- Improved the install.sh script so that it does a better job dealing with
+ directory names that contain spaces.
+
+- rEFInd now tries to guess the Linux distribution type based on the kernel
+ filename (Fedora and RHEL only) or the "ID" or "NAME" variables in
+ /etc/os-release on the kernel's partition. None of these is guaranteed to
+ work. A fallback of the Tux penguin icon remains in place in case rEFInd
+ can't find anything substantive enough for a guess.
+
+- Added "EFI\opensuse" to the locations searched for MOK utilities, since
+ OpenSUSE now uses that name.
+
+- Renamed "Reboot to Firmware User Interface" to "Reboot to Computer Setup
+ Utility" in menu.
+
+- Fixed bug in gptsync that caused it to hang if the disk had too few GPT
+ partitions to fill the MBR.
+
+0.6.10 (5/5/2013):
+------------------
+
+- Added support for "screensaver" token. If set to a positive integer, this
+ causes the screen to blank after the specified number of seconds of
+ inactivity. Pressing most keys (unfortunately NOT including Shift, Alt,
+ or Ctrl) will restore the display and restart the screen saver timeout.
+
+- Added icon for ChromeOS (os_chrome.icns in the icons subdirectory).
+ ChromeBooks reportedly boots using the fallback filename, but if a user
+ wants to install rEFInd on a ChromeBook, renaming the original EFI/BOOT
+ directory to EFI/chrome and then installing rEFInd in the fallback
+ filename will bring up this new icon for ChromeOS.
+
- Added new option to reboot the computer into the firmware's user
interface. This option is active by default, or can be set via the
"firmware" option to the "showtools" token in refind.conf. It works