+0.8.1 (5/??/2014):
+------------------
+
+- Added two new bitmap fonts to those distributed with rEFInd: Ubuntu Mono
+ and Nimbus Mono. Both come in 12-, 14-, 16-, and 24-point sizes.
+
+- Messages about pauses for scanning and re-scanning of boot loaders are
+ now suppressed when doing an initial delayed scan when scan_delay is 1
+ second.
+
+- Improved centering of legacy boot option descriptions on some systems'
+ screens.
+
+- Fixed bug that could cause a BIOS-mode boot to launch an inappropriate
+ device if that device had an innately high boot priority (as set by the
+ firmware).
+
+- Changed icons from ICNS to PNG form. There are several reasons to do
+ this, all of them minor; but together they're enough to warrant a change.
+ PNG is more common, and therefore more accessible to most users --
+ particularly those who don't use OS X. The PNG files are smaller than
+ their ICNS equivalents. PNG supports a wider range of sizes (although I'm
+ not now using anything that ICNS doesn't support, I might in the future).
+ The icon-scaling support added a few versions ago makes ICNS's support
+ for multiple icon sizes relatively unimportant.
+
+- Reversed order of search for icons by extension: rEFInd now searches
+ for PNG files before ICNS files, rather than the other way around. This
+ makes it possible to override a volume icon for rEFInd by giving it the
+ name .VolumeIcon.png, even when a .VolumeIcon.icns file exists on the
+ volume and is used by OS X.
+
+- Fixed bug that caused .VolumeIcon.icns to take higher-than-intended
+ precedence in icon setting for OS X.
+
+- Chainloading to BIOS-mode boot loaders now works on UEFI-based PCs when
+ rEFInd is built with GNU-EFI, not just when built with Tianocore.
+
+0.8.0 (5/4/2014):
+-----------------
+
+- The "dont_scan_volumes" parameter now also works with legacy-boot
+ volumes. Unlike with EFI volumes, where the option you pass must exactly
+ match an entire volume name, when applied to legacy-boot volumes, it
+ matches any part of the description that appears beneath the item when
+ you select it in the rEFInd main menu.
+
+- Can now boot in legacy mode from second (and probably later) hard disks!
+
+- rEFInd now limits the length of the firmware name string shown in the
+ system information screen to 65 characters. This is done because at least
+ one EFI presents a longer string by default, and this causes the entire
+ information display to come up empty on 800x600 displays.
+
+- rEFInd now uses the partition's name (as stored in the GPT data
+ structures) as a fallback for the filesystem's name if the latter can't
+ be found. Exceptions are if the partition name is one of three generic
+ names used by GPT fdisk: "Microsoft basic data", "Linux filesystem", or
+ "Apple HFS/HFS+". These are ignored in favor of the descriptive fallback
+ (e.g., "20 GiB Btrfs volume")
+
+- It's now possible to specify a volume by partition GUID number in a
+ manual boot stanza. This should be more reliable (albeit also more
+ awkward) than using a filesystem number (such as fs0: or fs1:).
+
+- Fixed memory-allocation bug that could cause error message displays,
+ and possibly hangs, when re-scanning boot loaders.
+
+0.7.9 (4/20/2014):
+------------------
+
+- Attempt to fix rEFInd perpetually re-scanning after ejecting a disc on
+ some Macs.
+
+- Added check to remove redundant (or non-functional if Secure Boot is
+ active) kernel entries for Ubuntu, which is now including two versions of
+ kernels, one signed and the other unsigned.
+
+- Fixed bug in install.sh that could cause it to display error messages
+ if the dmraid utility was not installed.
+
+- The HFS+ driver now reports a correct volume name.
+
+- Fixed some EFI filesystem driver bugs that could cause lockups under
+ some circumstances. These bugs could affect any of the filesystem
+ drivers.
+
+- Added "gdisk" option to the "showtools" configuration file token. When
+ active, this adds gdisk.efi or gdisk_{arch}.efi, if present in the
+ EFI\tools directory, to the tools row.
+
+- Fixed mistaken identification of the MOK utility as the "MOK utility
+ utility."
+
+
+0.7.8 (3/9/2014):
+-----------------
+
+- Added "debian" directory to source, which facilitates creation of Debian
+ packages. Packages built in this way are built with GNU-EFI and don't run
+ any post-installation script, so although the rEFInd binaries are on the
+ hard disk, they aren't installed to be bootable; you must manually run
+ install.sh. Also, at least on Ubuntu, the Make.common file's /usr/lib64
+ references must be changed to /usr/lib. This is more of a proof of
+ concept and a "leg up" for distribution maintainers than anything else.
+
+- Two new options, big_icon_size and small_icon_size, set the size of
+ the first-row OS icons and of the second-row tool icons, respectively.
+ The big_icon_size option also indirectly sets the size of disk-type
+ badges; they're 1/4 the size of the big icons. Default values are 128 and
+ 48, respectively, to match the actual icon files provided with rEFInd. If
+ the icon you're using is of a different size than you've specified,
+ rEFInd scales it. For best quality, you should both provide icons drawn
+ to the right size and set the icon sizes in refind.conf.
+
+- rEFInd now automatically scales icons to fit the standard icon sizes.
+ This won't have any effect with the icons that come with rEFInd, but it
+ can help if you want to use another icon, since you needn't scale it in a
+ graphics program before using it. Note that rEFInd uses bitmap icons, so
+ scaling by a huge amount (say, a 16x16 icon to fit the standard 128x128
+ OS icon) is not likely to look good.
+
+- Added new option, banner_scale, that tells rEFInd how to handle banners:
+ Set to "noscale" (the default), banners are not scaled, although they'll
+ be cropped if they're too big for the display. This is the same as the
+ behavior in previous versions. Set to "fillscreen", rEFInd now scales the
+ banner image (larger or smaller) to fill the display.
+
+- Adjusted the post-installation script in refind.spec (used to generate
+ RPMs, and therefore also indirectly Debian packages) to search for
+ existing shim program files under the filesnames shim.efi and shimx64.efi
+ rather than just shim.efi. Ubuntu uses shimx64.efi, so Debian packages
+ were failing to detect Ubuntu's shim in previous versions. (Note,
+ however, that Ubuntu's early shim 0.1 is unsuitable for use with rEFInd
+ The newer 0.4 version that's in the repositories now should work fine;
+ it's only when installing on an older system that's NOT been updated that
+ problems might arise.
+
+0.7.7 (1/3/2014):
+-----------------
+
+- Can now specify complete paths, optionally including volumes, in
+ dont_scan_files.
+
+- Added shimx64.efi to the default dont_scan_files list.
+
+- Added windows_recovery_files token, to specify what program(s) launch a
+ Windows recovery utility; and the "windows_recovery" option to
+ "showtools," to control whether or not to display the Windows recovery
+ utility on the second row of icons.
+
+- The use_graphics_for, also_scan_dirs, dont_scan_dirs, dont_scan_files,
+ and scan_driver_dirs tokens in refind.conf now support "+" as the first
+ option, which causes the remaining options to be added to the default
+ value rather than replacing that value. (This has no practical effect for
+ scan_driver_dirs, though, since it has a null default value.)
+
+- Added support for specifying the configuration file at program launch,
+ via the "-c" parameter, as in "refind_x64.efi -c foo.conf" to use the
+ foo.conf file as the main configuration file.
+
+- Scans of ext2/3/4fs and ReiserFS partitions now omit partitions with
+ duplicate filesystem UUIDs. These are likely parts of RAID arrays and so
+ would have the same boot loaders or kernels as the first one with a given
+ UUID.
+
+- Added feature in install.sh: Script now tries to locate and mount an ESP
+ in Linux, if it's currently unmounted.
+
+- Fixed bug in mkrlconf.sh and install.sh that caused a stray line break
+ and PARTUUID= specification to appear in generated refind_linux.conf file
+ under some circumstances.
+
+0.7.6 (12/15/2013):
+-------------------
+
+- Added support for multiple "default_selection" targets. These MUST be
+ comma-separated AND enclosed in quotes, as in:
+ default_selection "fred,ginger"
+ This example will launch "fred" by default if it's available; and if
+ it's not, rEFInd will attempt to launch "ginger" as the default.
+
+- Added support for time-sensitive "default_selection" setting. This token
+ may now have either one or three options. If one, it's interpreted as it
+ has been in the past, as setting a default that's independent of times.
+ If you follow this default by two times, however, those are interpreted
+ as the start and end times (in 24-hour format) for a default setting. For
+ instance, "default_selection foo 8:00 17:00" causes foo to be the default
+ from 8:00 (AM) to 17:00 (aka 5:00 PM). You can include multiple
+ "default_selection" lines to set different defaults for a variety of
+ times. If they're in conflict, the last one takes precedence. Note that
+ times are hardware clock's native value, which may be local time or UTC,
+ depending on your computer.
+
+- Added support for a blank-screen startup: Set "screensaver -1" and the
+ screen saver will be initialized when rEFInd starts. If you set a low
+ "timeout" value, the result will be a boot straight to the default OS
+ unless you hit a key soon after rEFInd starts. Once you hit a key, the
+ screensaver will be disabled.
+
+- Added --ownhfs {target} option to install.sh. This option causes rEFInd
+ to install to an HFS+ partition in a way that's more consistent with the
+ way the Mac's native boot loader is installed. Note that you should NOT
+ install to an already-bootable partition with this option, since it will
+ overwrite the existing boot loader, which would render OS X unbootable.
+
+0.7.5 (11/10/2013):
+-------------------
+
+- Fixed bug that caused unbootable exFAT partitions to show up as
+ bootable on Macs with BIOS/CSM/legacy boot options enabled.
+
+- Fixed bug in install.sh that caused installs to the ESP on recent
+ versions of OS X to fail.
+
+- Fixed bug that caused rEFInd to hang on some Macs when multiple EFI
+ drivers were present.
+
+- Fixed bug that caused clear to default gray screen when launching OSes
+ with 'use_graphics_for' enabled, even when the rEFInd background is not
+ gray. Now rEFInd clears to the same background color used in its menu.
+ When launching OS X, though, the OS X boot loader will itself clear to
+ gray a second or so later; and when launching Linux, it will clear to
+ black a second or so later.
+
+0.7.4.1 (8/25/2013):
+--------------------
+
+- My initial 0.7.4 release broke legacy-boot ability on Macs, so I quickly
+ released this version using the original 0.7.4 filenames to fix the
+ problem.
+
0.7.4 (8/25/2013):
------------------