+# Note that the legacy BIOS options require firmware support, which is
+# not present on all computers.
+# The netboot option is experimental and relies on the ipxe.efi and
+# ipxe_discover.efi program files.
+# On UEFI PCs, default is internal,external,optical,manual
+# On Macs, default is internal,hdbios,external,biosexternal,optical,cd,manual
+#
+#scanfor internal,external,optical,manual
+
+# By default, rEFInd relies on the UEFI firmware to detect BIOS-mode boot
+# devices. This sometimes doesn't detect all the available devices, though.
+# For these cases, uefi_deep_legacy_scan results in a forced scan and
+# modification of NVRAM variables on each boot. Adding "0", "off", or
+# "false" resets to the default value. This token has no effect on Macs or
+# when no BIOS-mode options are set via scanfor.
+# Default is unset (or "uefi_deep_legacy_scan false")
+#
+#uefi_deep_legacy_scan
+
+# Delay for the specified number of seconds before scanning disks.
+# This can help some users who find that some of their disks
+# (usually external or optical discs) aren't detected initially,
+# but are detected after pressing Esc.
+# The default is 0.
+#
+#scan_delay 5
+
+# When scanning volumes for EFI boot loaders, rEFInd always looks for
+# Mac OS X's and Microsoft Windows' boot loaders in their normal locations,
+# and scans the root directory and every subdirectory of the /EFI directory
+# for additional boot loaders, but it doesn't recurse into these directories.
+# The also_scan_dirs token adds more directories to the scan list.
+# Directories are specified relative to the volume's root directory. This
+# option applies to ALL the volumes that rEFInd scans UNLESS you include
+# a volume name and colon before the directory name, as in "myvol:/somedir"
+# to scan the somedir directory only on the filesystem named myvol. If a
+# specified directory doesn't exist, it's ignored (no error condition
+# results). The default is to scan the "boot" directory in addition to
+# various hard-coded directories.
+#
+#also_scan_dirs boot,ESP2:EFI/linux/kernels
+
+# Partitions (or whole disks, for legacy-mode boots) to omit from scans.
+# For EFI-mode scans, you must specify a volume by its label, which you
+# can obtain in an EFI shell by typing "vol", from Linux by typing
+# "blkid /dev/{devicename}", or by examining the disk's label in various
+# OSes' file browsers.
+# For legacy-mode scans, you can specify any subset of the boot loader
+# description shown when you highlight the option in rEFInd.
+# The default is "LRS_ESP".
+#
+#dont_scan_volumes "Recovery HD"
+
+# Directories that should NOT be scanned for boot loaders. By default,
+# rEFInd doesn't scan its own directory, the EFI/tools directory, the
+# EFI/memtest directory, the EFI/memtest86 directory, or the
+# com.apple.recovery.boot directory. Using the dont_scan_dirs option
+# enables you to "blacklist" other directories; but be sure to use "+"
+# as the first element if you want to continue blacklisting existing
+# directories. You might use this token to keep EFI/boot/bootx64.efi out
+# of the menu if that's a duplicate of another boot loader or to exclude
+# a directory that holds drivers or non-bootloader utilities provided by
+# a hardware manufacturer. If a directory is listed both here and in
+# also_scan_dirs, dont_scan_dirs takes precedence. Note that this
+# blacklist applies to ALL the filesystems that rEFInd scans, not just
+# the ESP, unless you precede the directory name by a filesystem name,
+# as in "myvol:EFI/somedir" to exclude EFI/somedir from the scan on the
+# myvol volume but not on other volumes.
+#
+#dont_scan_dirs ESP:/EFI/boot,EFI/Dell,EFI/memtest86
+
+# Files that should NOT be included as EFI boot loaders (on the
+# first line of the display). If you're using a boot loader that
+# relies on support programs or drivers that are installed alongside
+# the main binary or if you want to "blacklist" certain loaders by
+# name rather than location, use this option. Note that this will
+# NOT prevent certain binaries from showing up in the second-row
+# set of tools. Most notably, various Secure Boot and recovery
+# tools are present in this list, but may appear as second-row
+# items.
+# The file may be specified as a bare name (e.g., "notme.efi"), as
+# a complete filename (e.g., "/EFI/somedir/notme.efi"), or as a
+# complete filename with volume (e.g., "SOMEDISK:/EFI/somedir/notme.efi").
+# The default is shim.efi,shim-fedora.efi,shimx64.efi,PreLoader.efi,
+# TextMode.efi,ebounce.efi,GraphicsConsole.efi,MokManager.efi,HashTool.efi,
+# HashTool-signed.efi,bootmgr.efi
+#
+#dont_scan_files shim.efi,MokManager.efi
+
+# Scan for Linux kernels that lack a ".efi" filename extension. This is
+# useful for better integration with Linux distributions that provide
+# kernels with EFI stub loaders but that don't give those kernels filenames
+# that end in ".efi", particularly if the kernels are stored on a
+# filesystem that the EFI can read. When set to "1", "true", or "on", this
+# option causes all files in scanned directories with names that begin with
+# "vmlinuz" or "bzImage" to be included as loaders, even if they lack ".efi"
+# extensions. Passing this option a "0", "false", or "off" value causes
+# kernels without ".efi" extensions to NOT be scanned.
+# Default is "true" -- to scan for kernels without ".efi" extensions.
+#
+#scan_all_linux_kernels false