#hideui singleuser
#hideui all
+# Set the name of a subdirectory in which icons are stored. Icons must
+# have the same names they have in the standard directory. The directory
+# name is specified relative to the main rEFInd binary's directory. If
+# an icon can't be found in the specified directory, an attempt is made
+# to load it from the default directory; thus, you can replace just some
+# icons in your own directory and rely on the default for others.
+# Default is "icons".
+#
+#icons_dir myicons
+
# Use a custom title banner instead of the rEFInd icon and name. The file
# path is relative to the directory where refind.efi is located. The color
# in the top left corner of the image is used as the background color
# the big icons by stretching it in the middle. If only a big one is given,
# the built-in default will be used for the small icons.
#
-# Like the banner option above, these options take a filename of
-# an uncompressed BMP image file.
+# Like the banner option above, these options take a filename of an
+# uncompressed BMP image file with a color depth of 24, 8, 4, or 1 bits.
#
#selection_big selection-big.bmp
#selection_small selection-small.bmp
#
#textonly
+# Set the screen's video resolution. Pass this option two values,
+# corresponding to the X and Y resolutions. Note that not all resolutions
+# are supported. On UEFI systems, passing an incorrect value results in a
+# message being shown on the screen to that effect, along with a list of
+# supported modes. On EFI 1.x systems (e.g., Macintoshes), setting an
+# incorrect mode silently fails. On both types of systems, setting an
+# incorrect resolution results in the default resolution being used.
+# A resolution of 1024x768 usually works, but higher values often don't.
+# Default is "0 0" (use the system default resolution, usually 800x600).
+#
+#resolution 1024 768
+
+# Launch specified OSes in graphics mode. By default, rEFInd switches
+# to text mode and displays basic pre-launch information when launching
+# all OSes except OS X. Using graphics mode can produce a more seamless
+# transition, but displays no information, which can make matters
+# difficult if you must debug a problem. Also, on at least one known
+# computer, using graphics mode prevents a crash when using the Linux
+# kernel's EFI stub loader. You can specify an empty list to boot all
+# OSes in text mode.
+# Valid options:
+# osx - Mac OS X
+# linux - A Linux kernel with EFI stub loader
+# elilo - The ELILO boot loader
+# grub - The GRUB (Legacy or 2) boot loader
+# windows - Microsoft Windows
+# Default value: osx
+#
+#use_graphics_for osx,linux
+
# Which non-bootloader tools to show on the tools line, and in what
# order to display them:
-# shell - the EFI shell
-# gptsync - the (dangerous) gptsync.efi utility
+# shell - the EFI shell (requires external program; see rEFInd
+# documentation for details)
+# gptsync - the (dangerous) gptsync.efi utility (requires external
+# program; see rEFInd documentation for details)
# about - an "about this program" option
# exit - a tag to exit from rEFInd
# shutdown - shuts down the computer (a bug causes this to reboot EFI
# systems)
# reboot - a tag to reboot the computer
# Default is shell,about,shutdown,reboot
+#
#showtools shell, about, reboot
+# Directories in which to search for EFI drivers. These drivers can
+# provide filesystem support, give access to hard disks on plug-in
+# controllers, etc. In most cases none are needed, but if you add
+# EFI drivers and you want rEFInd to automatically load them, you
+# should specify one or more paths here. rEFInd always scans the
+# "drivers" and "drivers_{arch}" subdirectories of its own installation
+# directory (where "{arch}" is your architecture code); this option
+# specifies ADDITIONAL directories to scan.
+# Default is to scan no additional directories for EFI drivers
+#
+#scan_driver_dirs EFI/tools/drivers,drivers
+
# Which types of boot loaders to search, and in what order to display them:
# internal - internal EFI disk-based boot loaders
# external - external EFI disk-based boot loaders
# biosexternal - BIOS external boot loaders (USB, eSATA, etc.)
# cd - BIOS optical-disc boot loaders
# manual - use stanzas later in this configuration file
-# Default is internal,external,optical
-scanfor internal,external,optical
+# Note that the legacy BIOS options require firmware support, which is
+# not present on all computers.
+# On UEFI PCs, default is internal,external,optical,manual
+# On Macs, default is internal,hdbios,external,biosexternal,optical,cd,manual
+#
+#scanfor internal,external,optical,manual
+
+# Delay for the specified number of seconds before scanning disks.
+# This can help some users who find that some of their disks
+# (usually external or optical discs) aren't detected initially,
+# but are detected after pressing Esc.
+#
+#scan_delay 5
+
+# When scanning volumes for EFI boot loaders, rEFInd always looks for
+# Mac OS X's and Microsoft Windows' boot loaders in their normal locations,
+# and scans the root directory and every subdirectory of the /EFI directory
+# for additional boot loaders, but it doesn't recurse into these directories.
+# The also_scan_dirs token adds more directories to the scan list.
+# Directories are specified relative to the volume's root directory. This
+# option applies to ALL the volumes that rEFInd scans. If a specified
+# directory doesn't exist, it's ignored (no error condition results).
+# The default is to scan no additional directories.
+#
+#also_scan_dirs boot,EFI/linux/kernels
+
+# Directories that should NOT be scanned for boot loaders. By default,
+# rEFInd doesn't scan its own directory or the EFI/tools directory.
+# You can "blacklist" additional directories with this option, which
+# takes a list of directory names as options. You might do this to
+# keep EFI/boot/bootx64.efi out of the menu if that's a duplicate of
+# another boot loader or to exclude a directory that holds drivers
+# or non-bootloader utilities provided by a hardware manufacturer. If
+# a directory is listed both here and in also_scan_dirs, dont_scan_dirs
+# takes precedence. Note that this blacklist applies to ALL the
+# filesystems that rEFInd scans, not just the ESP.
+#
+#dont_scan_dirs EFI/boot,EFI/Dell
+
+# Scan for Linux kernels that lack a ".efi" filename extension. This is
+# useful for better integration with Linux distributions that provide
+# kernels with EFI stub loaders but that don't give those kernels filenames
+# that end in ".efi", particularly if the kernels are stored on a
+# filesystem that the EFI can read. When uncommented, this option causes
+# all files in scanned directories with names that begin with "vmlinuz"
+# or "bzImage" to be included as loaders, even if they lack ".efi"
+# extensions. The drawback to this option is that it can pick up kernels
+# that lack EFI stub loader support and other files. Most notably, if you
+# want to give a kernel a custom icon by placing an icon with the kernel's
+# filename but a ".icns" extension in the same directory as the kernel, this
+# option will cause the icon file to show up as a non-functional loader tag.
+# Default is to NOT scan for kernels without ".efi" extensions.
+#
+#scan_all_linux_kernels
# Set the maximum number of tags that can be displayed on the screen at
# any time. If more loaders are discovered than this value, rEFInd shows
# ("{"). Each entry ends with a close curly brace ("}"). Common
# keywords within each stanza include:
#
+# volume - identifies the filesystem from which subsequent files
+# are loaded. You can specify the volume by label or by
+# a number followed by a colon (as in "0:" for the first
+# filesystem or "1:" for the second).
# loader - identifies the boot loader file
# initrd - Specifies an initial RAM disk file
# icon - specifies a custom boot loader icon
# and adjust the entries to suit your needs.
# A sample entry for a Linux 3.3 kernel with its new EFI boot stub
-# support. This includes Linux-specific boot options and specification
-# of an initial RAM disk. Note uses of Linux-style forward slashes,
-# even in the initrd specification. Also note that a leading slash is
-# optional in file specifications.
+# support on a filesystem called "KERNELS". This entry includes
+# Linux-specific boot options and specification of an initial RAM disk.
+# Note uses of Linux-style forward slashes, even in the initrd
+# specification. Also note that a leading slash is optional in file
+# specifications.
menuentry Linux {
- loader EFI/Linux/bzImage-3.3.0-rc7
- initrd EFI/Linux/initrd-3.3.0.img
icon EFI/refind/icons/os_linux.icns
+ volume KERNELS
+ loader bzImage-3.3.0-rc7
+ initrd initrd-3.3.0.img
options "ro root=UUID=5f96cafa-e0a7-4057-b18f-fa709db5b837"
disabled
}
disabled
}
+# EFI shells are programs just like boot loaders, and can be
+# launched in the same way. You can pass a shell the name of a
+# script that it's to run on the "options" line. The script
+# could initialize hardware and then launch an OS, or it could
+# do something entirely different.
+menuentry "Windows via shell script" {
+ icon \EFI\refind\icons\os_win.icns
+ loader \EFI\tools\shell.efi
+ options "fs0:\EFI\tools\launch_windows.nsh"
+ disabled
+}