-0.5.1 (??/??/201?):
+0.6.3 (?/?/2013):
+-----------------
+
+- Added the ability to specify a volume name or number in the
+ "dont_scan_dirs" token.
+
+- Fixed a bug that caused removable EFI media to not appear in scan lists
+ if rEFInd was installed as EFI/BOOT/boot{arch}.efi on a hard disk.
+
+- Modified ISO-9660 driver so that it can handle discs with other than
+ 2048-byte sectors. This makes it useful for reading "hybrid ISO" images
+ burned to USB flash disks.
+
+- New mvrefind.sh script to move a rEFInd installation between a standard
+ location (typically EFI/refind) or one of the fallback locations
+ (EFI/BOOT or EFI/Microsoft/Boot). It can also do more exotic locations.
+
+- The install.sh script now installs to EFI/BOOT/bootx64.efi or
+ EFI/Microsoft/Boot/bootmgfw.efi if it's run in BIOS mode. This is
+ intended to give some chance of producing a bootable installation should
+ a user accidentally install Linux in EFI mode and then install rEFInd
+ from that installation.
+
+- The install.sh script now tries to find an existing rEFInd installation
+ and upgrade it, even if it's in EFI/BOOT or EFI/Microsoft/Boot rather
+ than in EFI/refind.
+
+- New "--yes" option to install.sh to help with unattended or automated
+ installations (as from an RPM or Debian package).
+
+0.6.2 (12/30/2012):
+-------------------
+
+- Inclusion of a sample refind.spec file for the benefit of RPM
+ distribution maintainers who might want to include rEFInd. It's a bit
+ rough, but it gets you a good chunk of the way there....
+
+- The EFI filesystem drivers can now be built with the GNU-EFI toolkit as
+ well as with the TianoCore EDK2. See the BUILDING.txt file for details on
+ how to build them with either toolkit. This improvement doesn't affect
+ users of my binary packages, but it should make it easier for Linux
+ distributions to adopt rEFInd into their package systems.
+
+- Tweaked refind.inf file for better build results using "native" TianoCore
+ EDK2 build process (vs. the Makefile-based build process that I use under
+ Linux). This won't affect those who use my binary builds or build under
+ Linux with the "make" command.
+
+- Fixed bug that prevented Secure Boot launches from working when rEFInd
+ was built with GNU-EFI rather than the TianoCore EDK2.
+
+- Substantial reworking of Secure Boot code, based on James Bottomley's
+ PreLoader program. This new code eliminates the limitation of launching
+ just one driver in Secure Boot mode and is likely to be more reliable
+ with future or obscure boot loaders. It should also work with non-x86-64
+ systems, although this relies on a platform-specific shim program, which
+ to date exists only for x86-64. The basic features are the same as before
+ -- rEFInd relies on shim for authentication functions and will launch
+ programs that are signed by Secure Boot keys, shim keys, or MOKs.
+
+- Altered default for "textmode" option (when it's commented out) to not
+ adjust the text mode at all. (Prior versions set it to mode 0 by
+ default.)
+
+0.6.1 (12/21/2012):
+-------------------
+
+- Added "--root" option to install.sh, to enable installation of rEFInd
+ to something other than the currently-running OS. This is intended for
+ use on emergency discs.
+
+- Thanks to Stefan Agner, the ext4fs driver now supports the "meta_bg"
+ filesystem feature, which distributes metadata throughout the disk. This
+ feature isn't used by default, but can be set at filesystem creation time
+ by passing the "-O meta_bg,^resize_inode" option to mke2fs. (Using
+ "^resize_inode" is necessary because meta_bg is incompatible with
+ resize_inode, which IS used by default.) This feature can be used on
+ ext3fs and ext2fs as well as on ext4fs, so the ext4fs driver can now
+ handle some ext3fs and ext2fs partitions that the ext2fs driver can't
+ handle.
+
+- Fixed some screen resolution-setting bugs.
+
+- Added the "words" that make up a filesystem's label (delimited by spaces,
+ dashes, or underscores) to the list of bases used to search for OS icons.
+ For instance, if the filesystem's label is "Arch", rEFInd searches for
+ os_Arch.icns; if it's "Fedora 17", it searches for os_Fedora.icns and
+ os_17.icns; and if it's "NEW_GENTOO", it searches for os_NEW.icns and
+ os_GENTOO.icns.
+
+- Refined hints displays to be more context-sensitive, particularly in text
+ mode.
+
+- Instead of displaying a blank filesystem label when a filesystem has
+ none, rEFInd now displays the size and/or type of the filesystem, as in
+ "boot EFI\foo\bar.efi from 200 MiB ext3 volume" rather than "boot
+ EFI\foo\bar.efi from".
+
+- Fixed a bug that caused the screen to clear after displaying an error
+ message but before displaying the "Hit any key to continue" message when
+ a boot loader launch failed.
+
+0.6.0 (12/16/2012):
+-------------------
+
+- Fixed a memory allocation bug that could cause a program crash when
+ specifying certain values with the "also_scan_dirs", "dont_scan_volumes",
+ "dont_scan_dirs", "dont_scan_files", and "scan_driver_dirs" refind.conf
+ options.
+
+- Modified Linux kernel initrd-finding code so that if an initrd is
+ specified in refind_linux.conf, rEFInd will not add any initrd it finds.
+ This enables an override of the default initrd, and is likely to be
+ particularly helpful to Arch Linux users.
+
+- Added ext4fs driver!
+
+- Made "boot" the default value for "also_scan_dirs".
+
+- Added identifying screen header to line editor.
+
+- Fixed bug that caused rEFInd's display to be mis-sized upon return
+ from a program that set the resolution itself.
+
+- Adjusted "resolution" refind.conf parameter so that it can accept EITHER
+ a resolution as width and height OR a single digit as a UEFI mode number
+ (which is system-specific). This is done because some systems present the
+ same mode twice in their mode lists, perhaps varying in refresh rate,
+ monitor output, or some other salient characteristics; specifying the
+ mode number enables selecting the higher-numbered mode, whereas using
+ horizontal and vertical resolution values selects the lowest-numbered
+ mode.
+
+- Added "textmode" refind.conf parameter to set the text mode used in
+ text-only displays, and for the line editor and boot-time handoff
+ display even in graphics mode.
+
+- Fixed bug that caused tools (shell, etc.) to launch when they were
+ highlighted and F2 or Insert was pressed.
+
+- Added "editor" option to the "hideui" token in refind.conf, which
+ disables the boot options editor.
+
+- Added hints text to rEFInd main menu and sub-menus. This can be disabled
+ by setting the new "hints" option to the "hideui" token in refind.conf.
+
+- Added "boot with minimal options" entry to refind_linux.conf file
+ generated by install.sh. This entry boots without the options extracted
+ from the /etc/default/grub file.
+
+- Added keys subdirectory to main distribution, to hold public Secure
+ Boot/shim keys from known sources.
+
+- Changed install.sh --drivers option to --alldrivers, added new
+ --nodrivers option, and made the default on Linux to install the one
+ driver that's used on /boot (or the root filesystem if /boot isn't a
+ separate partition). Of course, this won't install a non-existent driver,
+ and it also won't work properly if run from an emergency disk unless you
+ mount a separate /boot partition at that location.
+
+- Fixed bug in install.sh that prevented creation of refind_linux.conf file
+ on Linux systems.
+
+0.5.1.1 (12/12/2012):
+---------------------
+
+- Fixed bug in install.sh that prevented it from working on OS X.
+
+0.5.1 (12/11/2012):
-------------------
-- Implemented a workaround to enable ELILO to launch with Secure Boot
- active: Pass a "-C \path\to\elilo\elilo.conf" option to the program.
- The user will need to explicitly provide the path to the Linux kernel and
- initrd, not rely on the program to be able to read the files from the
- current directory. In elilo.conf, the path should be specified with
- forward slashes or doubled-up backslashes.
+- Added support for "0" options to "textonly" and "scan_all_linux_kernels"
+ to reverse the usual meaning of these tokens. This is useful for
+ including these options in a secondary configuration file called with the
+ new "include" token to override a setting set in the main file.
+
+- Added "include" token for refind.conf, to enable including a secondary
+ configuration file from a primary one.
+
+- Modified install.sh so that it creates a simple refind_linux.conf file in
+ /boot, if that file doesn't already exist and if install.sh is run from
+ Linux. If that directory happens to be on a FAT, HFS+, ext2fs, ext3fs, or
+ ReiserFS volume, and if the necessary drivers are installed, the result
+ is that rEFInd will detect the Linux installation with no further
+ configuration on many systems. (Some may still require tweaking of kernel
+ options, though; for instance, adding "dolvm" on Gentoo systems that use
+ LVM.)
+
+- Added --shim and --localkeys options to install.sh to help simplify setup
+ on systems with Secure Boot active.
+
+- Fixed (maybe) bug that caused resolution options to not be displayed on
+ recent Macs with GOP graphics when specifying an invalid resolution in
+ refind.conf.
+
+- Fixed bug that caused some programs (EFI shells, in particular) to hang
+ when launching on some systems (DUET, in particular).
+
+- Implemented a fix to enable ELILO to launch with Secure Boot active.
+ This fix might help with some other boot loaders in Secure Boot mode,
+ too, but I don't know of any specifics.
0.5.0 (12/6/2012):
------------------