-0.6.6 (?/??/2013):
+0.8.1 (5/??/2014):
------------------
+- Added two new bitmap fonts to those distributed with rEFInd: Ubuntu Mono
+ and Nimbus Mono. Both come in 12-, 14-, 16-, and 24-point sizes.
+
+- Messages about pauses for scanning and re-scanning of boot loaders are
+ now suppressed when doing an initial delayed scan when scan_delay is 1
+ second.
+
+- Improved centering of legacy boot option descriptions on some systems'
+ screens.
+
+- Fixed bug that could cause a BIOS-mode boot to launch an inappropriate
+ device if that device had an innately high boot priority (as set by the
+ firmware).
+
+- Changed icons from ICNS to PNG form. There are several reasons to do
+ this, all of them minor; but together they're enough to warrant a change.
+ PNG is more common, and therefore more accessible to most users --
+ particularly those who don't use OS X. The PNG files are smaller than
+ their ICNS equivalents. PNG supports a wider range of sizes (although I'm
+ not now using anything that ICNS doesn't support, I might in the future).
+ The icon-scaling support added a few versions ago makes ICNS's support
+ for multiple icon sizes relatively unimportant.
+
+- Reversed order of search for icons by extension: rEFInd now searches
+ for PNG files before ICNS files, rather than the other way around. This
+ makes it possible to override a volume icon for rEFInd by giving it the
+ name .VolumeIcon.png, even when a .VolumeIcon.icns file exists on the
+ volume and is used by OS X.
+
+- Fixed bug that caused .VolumeIcon.icns to take higher-than-intended
+ precedence in icon setting for OS X.
+
+- Chainloading to BIOS-mode boot loaders now works on UEFI-based PCs when
+ rEFInd is built with GNU-EFI, not just when built with Tianocore.
+
+0.8.0 (5/4/2014):
+-----------------
+
+- The "dont_scan_volumes" parameter now also works with legacy-boot
+ volumes. Unlike with EFI volumes, where the option you pass must exactly
+ match an entire volume name, when applied to legacy-boot volumes, it
+ matches any part of the description that appears beneath the item when
+ you select it in the rEFInd main menu.
+
+- Can now boot in legacy mode from second (and probably later) hard disks!
+
+- rEFInd now limits the length of the firmware name string shown in the
+ system information screen to 65 characters. This is done because at least
+ one EFI presents a longer string by default, and this causes the entire
+ information display to come up empty on 800x600 displays.
+
+- rEFInd now uses the partition's name (as stored in the GPT data
+ structures) as a fallback for the filesystem's name if the latter can't
+ be found. Exceptions are if the partition name is one of three generic
+ names used by GPT fdisk: "Microsoft basic data", "Linux filesystem", or
+ "Apple HFS/HFS+". These are ignored in favor of the descriptive fallback
+ (e.g., "20 GiB Btrfs volume")
+
+- It's now possible to specify a volume by partition GUID number in a
+ manual boot stanza. This should be more reliable (albeit also more
+ awkward) than using a filesystem number (such as fs0: or fs1:).
+
+- Fixed memory-allocation bug that could cause error message displays,
+ and possibly hangs, when re-scanning boot loaders.
+
+0.7.9 (4/20/2014):
+------------------
+
+- Attempt to fix rEFInd perpetually re-scanning after ejecting a disc on
+ some Macs.
+
+- Added check to remove redundant (or non-functional if Secure Boot is
+ active) kernel entries for Ubuntu, which is now including two versions of
+ kernels, one signed and the other unsigned.
+
+- Fixed bug in install.sh that could cause it to display error messages
+ if the dmraid utility was not installed.
+
+- The HFS+ driver now reports a correct volume name.
+
+- Fixed some EFI filesystem driver bugs that could cause lockups under
+ some circumstances. These bugs could affect any of the filesystem
+ drivers.
+
+- Added "gdisk" option to the "showtools" configuration file token. When
+ active, this adds gdisk.efi or gdisk_{arch}.efi, if present in the
+ EFI\tools directory, to the tools row.
+
+- Fixed mistaken identification of the MOK utility as the "MOK utility
+ utility."
+
+
+0.7.8 (3/9/2014):
+-----------------
+
+- Added "debian" directory to source, which facilitates creation of Debian
+ packages. Packages built in this way are built with GNU-EFI and don't run
+ any post-installation script, so although the rEFInd binaries are on the
+ hard disk, they aren't installed to be bootable; you must manually run
+ install.sh. Also, at least on Ubuntu, the Make.common file's /usr/lib64
+ references must be changed to /usr/lib. This is more of a proof of
+ concept and a "leg up" for distribution maintainers than anything else.
+
+- Two new options, big_icon_size and small_icon_size, set the size of
+ the first-row OS icons and of the second-row tool icons, respectively.
+ The big_icon_size option also indirectly sets the size of disk-type
+ badges; they're 1/4 the size of the big icons. Default values are 128 and
+ 48, respectively, to match the actual icon files provided with rEFInd. If
+ the icon you're using is of a different size than you've specified,
+ rEFInd scales it. For best quality, you should both provide icons drawn
+ to the right size and set the icon sizes in refind.conf.
+
+- rEFInd now automatically scales icons to fit the standard icon sizes.
+ This won't have any effect with the icons that come with rEFInd, but it
+ can help if you want to use another icon, since you needn't scale it in a
+ graphics program before using it. Note that rEFInd uses bitmap icons, so
+ scaling by a huge amount (say, a 16x16 icon to fit the standard 128x128
+ OS icon) is not likely to look good.
+
+- Added new option, banner_scale, that tells rEFInd how to handle banners:
+ Set to "noscale" (the default), banners are not scaled, although they'll
+ be cropped if they're too big for the display. This is the same as the
+ behavior in previous versions. Set to "fillscreen", rEFInd now scales the
+ banner image (larger or smaller) to fill the display.
+
+- Adjusted the post-installation script in refind.spec (used to generate
+ RPMs, and therefore also indirectly Debian packages) to search for
+ existing shim program files under the filesnames shim.efi and shimx64.efi
+ rather than just shim.efi. Ubuntu uses shimx64.efi, so Debian packages
+ were failing to detect Ubuntu's shim in previous versions. (Note,
+ however, that Ubuntu's early shim 0.1 is unsuitable for use with rEFInd
+ The newer 0.4 version that's in the repositories now should work fine;
+ it's only when installing on an older system that's NOT been updated that
+ problems might arise.
+
+0.7.7 (1/3/2014):
+-----------------
+
+- Can now specify complete paths, optionally including volumes, in
+ dont_scan_files.
+
+- Added shimx64.efi to the default dont_scan_files list.
+
+- Added windows_recovery_files token, to specify what program(s) launch a
+ Windows recovery utility; and the "windows_recovery" option to
+ "showtools," to control whether or not to display the Windows recovery
+ utility on the second row of icons.
+
+- The use_graphics_for, also_scan_dirs, dont_scan_dirs, dont_scan_files,
+ and scan_driver_dirs tokens in refind.conf now support "+" as the first
+ option, which causes the remaining options to be added to the default
+ value rather than replacing that value. (This has no practical effect for
+ scan_driver_dirs, though, since it has a null default value.)
+
+- Added support for specifying the configuration file at program launch,
+ via the "-c" parameter, as in "refind_x64.efi -c foo.conf" to use the
+ foo.conf file as the main configuration file.
+
+- Scans of ext2/3/4fs and ReiserFS partitions now omit partitions with
+ duplicate filesystem UUIDs. These are likely parts of RAID arrays and so
+ would have the same boot loaders or kernels as the first one with a given
+ UUID.
+
+- Added feature in install.sh: Script now tries to locate and mount an ESP
+ in Linux, if it's currently unmounted.
+
+- Fixed bug in mkrlconf.sh and install.sh that caused a stray line break
+ and PARTUUID= specification to appear in generated refind_linux.conf file
+ under some circumstances.
+
+0.7.6 (12/15/2013):
+-------------------
+
+- Added support for multiple "default_selection" targets. These MUST be
+ comma-separated AND enclosed in quotes, as in:
+ default_selection "fred,ginger"
+ This example will launch "fred" by default if it's available; and if
+ it's not, rEFInd will attempt to launch "ginger" as the default.
+
+- Added support for time-sensitive "default_selection" setting. This token
+ may now have either one or three options. If one, it's interpreted as it
+ has been in the past, as setting a default that's independent of times.
+ If you follow this default by two times, however, those are interpreted
+ as the start and end times (in 24-hour format) for a default setting. For
+ instance, "default_selection foo 8:00 17:00" causes foo to be the default
+ from 8:00 (AM) to 17:00 (aka 5:00 PM). You can include multiple
+ "default_selection" lines to set different defaults for a variety of
+ times. If they're in conflict, the last one takes precedence. Note that
+ times are hardware clock's native value, which may be local time or UTC,
+ depending on your computer.
+
+- Added support for a blank-screen startup: Set "screensaver -1" and the
+ screen saver will be initialized when rEFInd starts. If you set a low
+ "timeout" value, the result will be a boot straight to the default OS
+ unless you hit a key soon after rEFInd starts. Once you hit a key, the
+ screensaver will be disabled.
+
+- Added --ownhfs {target} option to install.sh. This option causes rEFInd
+ to install to an HFS+ partition in a way that's more consistent with the
+ way the Mac's native boot loader is installed. Note that you should NOT
+ install to an already-bootable partition with this option, since it will
+ overwrite the existing boot loader, which would render OS X unbootable.
+
+0.7.5 (11/10/2013):
+-------------------
+
+- Fixed bug that caused unbootable exFAT partitions to show up as
+ bootable on Macs with BIOS/CSM/legacy boot options enabled.
+
+- Fixed bug in install.sh that caused installs to the ESP on recent
+ versions of OS X to fail.
+
+- Fixed bug that caused rEFInd to hang on some Macs when multiple EFI
+ drivers were present.
+
+- Fixed bug that caused clear to default gray screen when launching OSes
+ with 'use_graphics_for' enabled, even when the rEFInd background is not
+ gray. Now rEFInd clears to the same background color used in its menu.
+ When launching OS X, though, the OS X boot loader will itself clear to
+ gray a second or so later; and when launching Linux, it will clear to
+ black a second or so later.
+
+0.7.4.1 (8/25/2013):
+--------------------
+
+- My initial 0.7.4 release broke legacy-boot ability on Macs, so I quickly
+ released this version using the original 0.7.4 filenames to fix the
+ problem.
+
+0.7.4 (8/25/2013):
+------------------
+
+- Fixed options passing to loader to include loader's filename as the first
+ option. This omission had no effect on most boot loaders, but caused
+ VMware's mboot64.efi to fail.
+
+- Added support for memtest86 as second-row option. Program must be
+ stored in EFI/tools, EFI/tools/memtest, EFI/tools/memtest86, EFI/memtest,
+ or EFI/memtest86; and must use the name memtest86.efi, memtest86_x64.efi,
+ memtest86x64.efi, or bootx64.efi (changing "x64" to "ia32" on IA-32
+ systems). The memtest86 program is scanned for when the "showtools"
+ option includes the "memtest" or "memtest86" token, which it does by
+ default.
+
+- Added space to end of "Boot %s from %s" string; enables adding a space
+ to the end of the "default_selection" item (in quotes) to set a default
+ that matches a volume name that's identical to another one except for
+ extra characters at the end of the non-wanted volume's name.
+
+- Fixed bug that could cause rEFInd to hang when launching boot loaders
+ under some conditions. (Launching from Firewire drives on Macs is the
+ known case, but there may be others.)
+
+0.7.3 (8/7/2013):
+-----------------
+
+- Fixed bug that caused missing media-type badges on BIOS-mode boot
+ loaders on Macs.
+
+- Fixed bug that caused failure when launching BIOS-mode OSes on Macs.
+
+0.7.2 (8/6/2013):
+-----------------
+
+- Fixed bug that caused display glitches in the final entry on the first
+ row of icons if the second row of icons was empty.
+
+- Fixed bug that could cause incorrect scanning or even a rEFInd crash when
+ using volume specification in also_scan_dirs token.
+
+- Added protection against loading invalid drivers and other EFI programs.
+ (Some EFIs crash when attempting to load such drivers and programs.)
+
+- Added PreLoader.efi and shim-fedora.efi to default dont_scan_files list;
+ it's now "shim.efi, shim-fedora.efi, PreLoader.efi, TextMode.efi,
+ ebounce.efi, GraphicsConsole.efi, MokManager.efi, HashTool.efi,
+ HashTool-signed.efi".
+
+- Added icon for Funtoo Linux.
+
+- Fixed reading of volume badges from user-specified icons directory, which
+ was broken.
+
+- Fixed handling of /.VolumeBadge.icns (or /.VolumeBadge.png) files, which
+ was broken.
+
+0.7.1 (7/8/2013):
+-----------------
+
+- Fixed build problem with recent development versions of EDK2.
+
+- Added scan for Boot Repair's backup of the Windows boot loader
+ (bkpbootmgfw.efi). If found, give separate entries for it and for
+ bootmgfw.efi, each with its own descriptive text label.
+
+- Fixed also_scan_dirs; used to have bug that caused it to ignore
+ volume specification, if present.
+
+- Fixed bug in driver cache that caused Btrfs driver to hang sometimes.
+
+0.7.0 (6/27/2013):
+------------------
+
+- Added Btrfs signature to rEFInd, so that it can identify the filesystem
+ type for volumes that lack labels.
+
+- Changed some critical filesystem driver pointers from 32-bit to 64-bit.
+ This *SHOULD* enable use of over-2TiB filesystems (for those filesystems
+ that support such large volumes). This capability is largely untested,
+ though.
+
+- Added a cache to the filesystem driver core, and therefore to all the
+ filesystem drivers. This cache greatly improves performance in
+ VirtualBox, and offers modest performance improvements on a few "real"
+ computers. The most dramatic improvement is on ext2/3fs under VirtualBox:
+ Loading a kernel and initrd used to take ~200 seconds on my system, but
+ now takes ~3 seconds! On most "real" hardware, the improvement is much
+ less dramatic -- an improvement of a second or less, presumably because
+ of cacheing within the EFI or on the hard disk itself.
+
+- Filter boot loaders based on a test of their validity; keeps out Linux
+ kernels without EFI stub loader code, loaders for the wrong architecture,
+ non-EFI loaders, etc.
+
+- New Btrfs driver, contributed by Samuel Liao based on GRUB 2.00 Btrfs
+ code.
+
+0.6.12 (6/18/2013):
+-------------------
+
+- Changed the 64-bit EFI shell included in the CD-R and USB flash drive
+ images to a version 2 shell that should support the "bcfg" command.
+
+- Added support for PreBootloader to refind.spec's built-in installation
+ script.
+
+- Added support for the Linux Foundation's PreLoader to install.sh. It's
+ treated just like shim, including using the --shim option (or, now,
+ --preloader); but it searches for and copies HashTool.efi rather than
+ MokManager.efi, and filenames are adjusted appropriately.
+
+- Added code to determine Linux root filesystem from /etc/fstab file, if
+ it's on the same partition as the kernel and if the refind_linux.conf
+ file is not available. This enables rEFInd to boot Linux without any
+ rEFInd-specific configuration files on some (but not all) systems.
+
+0.6.11 (5/13/2013):
+-------------------
+
+- New feature: rEFInd now ignores symbolic links to files on filesystems
+ that support them. This prevents the "vmlinuz" symbolic link that some
+ distributions create in the root directory from appearing in the loader
+ list. Note that this does NOT affect symbolic links to directories.
+
+- Added icons for Lubuntu and Kubuntu.
+
+- Improved the install.sh script so that it does a better job dealing with
+ directory names that contain spaces.
+
+- rEFInd now tries to guess the Linux distribution type based on the kernel
+ filename (Fedora and RHEL only) or the "ID" or "NAME" variables in
+ /etc/os-release on the kernel's partition. None of these is guaranteed to
+ work. A fallback of the Tux penguin icon remains in place in case rEFInd
+ can't find anything substantive enough for a guess.
+
+- Added "EFI\opensuse" to the locations searched for MOK utilities, since
+ OpenSUSE now uses that name.
+
+- Renamed "Reboot to Firmware User Interface" to "Reboot to Computer Setup
+ Utility" in menu.
+
+- Fixed bug in gptsync that caused it to hang if the disk had too few GPT
+ partitions to fill the MBR.
+
+0.6.10 (5/5/2013):
+------------------
+
+- Added support for "screensaver" token. If set to a positive integer, this
+ causes the screen to blank after the specified number of seconds of
+ inactivity. Pressing most keys (unfortunately NOT including Shift, Alt,
+ or Ctrl) will restore the display and restart the screen saver timeout.
+
+- Added icon for ChromeOS (os_chrome.icns in the icons subdirectory).
+ ChromeBooks reportedly boots using the fallback filename, but if a user
+ wants to install rEFInd on a ChromeBook, renaming the original EFI/BOOT
+ directory to EFI/chrome and then installing rEFInd in the fallback
+ filename will bring up this new icon for ChromeOS.
+
+- Added new option to reboot the computer into the firmware's user
+ interface. This option is active by default, or can be set via the
+ "firmware" option to the "showtools" token in refind.conf. It works
+ on only some computers, though; older computers lack this feature, and
+ when rEFInd is told to use this feature on such computers, the directive
+ is quietly ignored.
+
+- Upgraded LodePNG library from version 20121216 to 20130415 and
+ restructured rEFInd-specific modifications to simplify future upgrades.
+
+- Replaced hexadecimal error code with description if an error is
+ encountered when saving a screen shot.
+
+- Enable multiple screen shots: Rather than naming all screen shots
+ "screenshot.bmp", the name is now "screenshot_###.bmp", where "###" is a
+ sequence number, starting with "001".
+
+0.6.9 (4/25/2013):
+------------------
+
+- Modified default banner to include the new rEFInd icon, provided by Erik
+ Kemperman.
+
+- Worked around a suspected firmware bug that caused rEFInd 0.6.6 to 0.6.8
+ to hang at startup on some systems (DUET and some Macs).
+
+- Modified rEFInd to search for gptsync under the names gptsync.efi and
+ gptsync_{arch}.efi, where {arch} is ia32 or x64. (Previous versions
+ searched only for gptsync.efi.)
+
+- Added gptsync program from rEFIt project, but with some changes to
+ improve flexibility and make it less likely that UEFI users will
+ accidentally trash their systems.
+
+- Changed timeout code so that the timeout continues if the keyboard is
+ disconnected. This can help in booting a headless server or a system with
+ a bluetooth or other keyboard that's not recognized by the EFI.
+
+0.6.8 (3/18/2013):
+------------------
+
+- Added workaround for presumed EFI bug that was causing "Invalid
+ Parameter" errors when scanning for boot loaders on some computers.
+
+- Added search for an EFI shell called shell.efi in the root directory
+ (previously this name was only accepted in EFI\tools).
+
+- Fixed bug in install.sh that caused it to fail on some systems (Fedora
+ 18, for instance) because of a problem identifying the ESP.
+
+- Fixed bug that caused icons named after boot loaders to not be used.
+
+0.6.7 (2/3/2013):
+-----------------
+
+- Added a more explicit error message summarizing options when a launch of
+ a program results in a Secure Boot failure.
+
+- Changed MOK tool detection to scan all volumes, not just the rEFInd
+ home volume. This is desirable because the Linux Foundation's HashTool
+ can only scan its own volume, making it desirable to place copies of this
+ program on every volume that holds EFI boot loader binaries.
+
+- Added support for launching the Linux Foundation HashTool as a means of
+ managing MOKs (or MOK hashes, at any rate).
+
+- Fixed bug that caused rEFInd to present an entry for itself as a
+ Microsoft OS if it was launched as EFI/Microsoft/Boot/bootmgfw.efi.
+
+- Fixed bug that caused dont_scan_volumes option to be added to
+ also_scan_dirs list.
+
+- Fixed dont_scan_volumes so that it works with OS X boot loaders.
+
+- Fixed broken mixing of PNG and ICNS icons when using a user-specified
+ icons directory -- previously, an ICNS file in the default directory
+ would override a PNG file in the user-specified directory.
+
+0.6.6 (1/26/2013):
+------------------
+
+- rEFInd now ignores the fallback boot loader (EFI/BOOT/bootx64.efi or
+ EFI/BOOT/bootia32.efi) if it's identical to another boot loader on
+ the same volume. This is intended to help unclutter the display on
+ systems that run Windows, since Windows tends to duplicate its own boot
+ loader under the fallback name.
+
+- Added new "font" token to refind.conf, which enables specifying a font in
+ the form of a PNG file. This file must contain monospace glyphs for the
+ 95 characters from ASCII 32 to 126 (space through tilde), inclusive, plus
+ a glyph to be displayed for characters outside of this range, for a total
+ of 96 glyphs.
+
+- Replaced the old font (inherited from rEFInd) with an anti-aliased
+ version of Luxi Mono Regular 14 point.
+
+- Fixed bug that caused rEFInd to ignore manual boot stanzas in files
+ included via the "include" token in refind.conf.
+
+- Fixed bug that caused ASSERT error on some systems (and conceivably a
+ crash on startup on some) when default_selection line in refind.conf was
+ commented out or empty.
+
- Fixed bug that caused "Binary is whitelisted" message to persist on
screen after loading MOK-signed drivers in Secure Boot mode.