code.delx.au - gnu-emacs-elpa/blob - ChangeLog

   1 2001-07-20  Stefan Monnier  <monnier@cs.yale.edu>
   2
   3         * sml-mode.el (sml-rightalign-and): New defcustom.
   4         (sml-tyvarseq-re): New var.
   5         (sml-font-lock-keywords): Use it.
   6         (sml-imenu-create-index): Don't get confused by tyvarseq's.
   7         (sml-mode-variables): Don't set `comment-column'.
   8         (sml-funname-of-and): New function.
   9         (sml-electric-pipe): Use it.
  10         (sml-find-comment-indent): Try to ignore comment-markers in strings.
  11         (sml-calculate-indentation): Handle closing parens specially.
  12         (sml-indent-pipe): Recognize the case where `and' defines a datatype.
  13         (sml-dangling-sym): Make it work if the symbol is an open-paren.
  14         (sml-indent-default): Change the behavior when preceded by `end',
  15         although I'm not quite sure why.
  16         Understand dangling open-parens.
  17         Properly skip *all* subexpressions of lower precedence.
  18         Allow use of sml-symbol-indent to outdent lines starting with , or ;.
  19         (sml-insert-form): Use preceding-char to avoid bug at bobp.
  20
  21 2001-07-19  Stefan Monnier  <monnier@cs.yale.edu>
  22
  23         * sml-proc.el (sml-proc-buffer): Save excursion when calling run-sml.
  24
  25         * sml-move.el (sml-syntax-prec): Split ; and , from `in' and `with'.
  26
  27         * sml-mode.texi: Put the entry in `Emacs' rather than `Editors'.
  28
  29         * sml-mode.spec (BuildArch): Simplify call to `install-info'.
  30
  31         * sml-defs.el (sml-mode-menu): Add an explicit t for always-active.
  32         (sml-symbol-indent): Add entries for , and ; and turn into defcustom.
  33
  34         * sml-compat.el: Add more stuff.  It might help for Emacs-19.34.
  35
  36         * makefile.pkg (test): Use elisp files in current dir.
  37
  38 2000-12-24  Stefan Monnier  <monnier@cs.yale.edu>
  39
  40         * Makefile (install): Also install .el files.
  41         (dist): Don't rely on $CVSROOT.
  42
  43         * sml-mode.el: Require `skeleton'.
  44         (sml-mode): Add the menu for XEmacs.  Make sure @ is a valid skeleton.
  45         (sml-comment-indent): Remove.
  46         (sml-mode-variables): Don't set comment-indent-function.
  47         (sml-def-skeleton): Nop if skeletons aren't available.
  48         (skeletons): Use `> _' and `@'.
  49         (sml-forms-menu): Don't bother with easy-menu-filter-return crap.
  50         (sml-cm-mode-syntax-table, sml-cm-font-lock-keywords): New vars.
  51         (sml-cm-mode): Use define-derived-mode rather than define-generic-mode.
  52         (sml-lex-font-lock-keywords, sml-lex-font-lock-defaults): New vars.
  53         (sml-yacc-font-lock-keywords): Use sml-lex-font-lock-keywords.
  54         Refine pattern to recognize the %prec keyword.
  55         (sml-yacc-font-lock-defaults): Fix typo.
  56
  57         * sml-proc.el (inferior-sml-mode): Disable next-error for XEmacs.
  58
  59         * sml-util.el (defsyntax): Don't forget to eval `doc'.
  60
  61         * sml-mode.spec: Simplify.
  62
  63         * sml-defs.el (sml-mode-menu): Remove bogus entry for sml-mode-version.
  64
  65 2000-10-06  Stefan Monnier  <monnier@cs.yale.edu>
  66
  67         * sml-mode.el: Make the toplevel closer to usual practice.
  68         (sml-imenu-regexp, sml-imenu-create-index): New var and fun.
  69         (sml-mode): Use them.
  70         (sml-beginning-of-defun): Add `and' as function-leader.
  71         (sml-lex-mode): New trivial mode.
  72         (sml-yacc-bnf-face, sml-yacc-indent-action, sml-yacc-indent-pipe)
  73         (sml-yacc-indent-term, sml-yacc-font-lock-keywords)
  74         (sml-yacc-font-lock-defaults): New vars.
  75         (sml-yacc-indent-line, sml-yacc-indentation, sml-yacc-mode): New funs.
  76
  77         * sml-mode.texi: Added yours truly to the list of authors.
  78
  79         * sml-mode.spec: New file.
  80
  81         * sml-defs.el (sml-outline-regexp): Slightly improved regexp.
  82
  83 2000-08-24  Stefan Monnier  <monnier@cs.yale.edu>
  84
  85         * sml-proc.el (inferior-sml-mode-map): Don't inherit from sml-bindings.
  86         Add the binding for C-c C-l explicitly instead.
  87         (sml-run): Look in cwd (but only if the command has slashes).
  88
  89         * sml-mode.el (sml-mode-abbrev-table): Remove (created by
  90         define-derived-mode).
  91         (sml-mode): Setup add-log's current-defun-function.
  92         (sml-indent-line): Never indent to a negative level.
  93         (sml-skip-siblings, sml-beginning-of-defun, sml-max-name-components)
  94         (sml-current-fun-name): New funs and vars for add-log support.
  95         (sml-comment-indent): Simplify.
  96         (sml-def-skeleton): Also create the skeleton as an abbrev.
  97         (skeletons): New for "struct", "sig", "val", "fn" and "fun".
  98         (sml-electric-space): Rewrite to use abbrev's machinery.
  99
 100         * sml-defs.el (sml-mode-map): Merge with sml-bindings.
 101         (sml-bindings): Remove.
 102
 103 2000-02-22  Stefan Monnier  <monnier@cs.yale.edu>
 104
 105         * sml-mode.el (sml-find-matching-starter): Use syms instead of a RE.
 106         (sml-indent-default): Use symbol membership rather than a regexp.
 107         Also, use `sym-indent' instead of (current-column).
 108         This fixes a problem with a hanging `structure Foo = (struct|let)'
 109         (due to `structure' having a sml-indent-rule, as opposed to `fun').
 110         Hopefully it won't introduce other problems.
 111         (sml-font-lock-keywords): Match vars `val x : int' also.
 112         (sml-electric-pipe): Update to the new `sml-find-matching-starter' and
 113         return a sensible default instead of raising an error in case of
 114         unexpected situations.
 115         (sml-indent-line): Ignore errors and keep the cursor where it is.
 116         (sml-calculate-indentation, sml-indent-pipe): Use syms instead of REs.
 117
 118         * sml-defs.el (sml-starters-re, sml-pipehead-re): Remove.
 119
 120         * testcases.sml: New file.
 121
 122         * makefile.pkg (test): New target to run the test suite.
 123
 124 2000-02-18  Stefan Monnier  <monnier@cs.yale.edu>
 125
 126         * *.el: Pass through checkdoc and use `eval-when-compile' whenever
 127         possible for (require 'cl).
 128
 129 2000-02-18  Stefan Monnier  <monnier@cs.yale.edu>
 130
 131         * sml-util.el (make-temp-dir, make-temp-file, temp-file-dir)
 132         (delete-temp-dirs): Replaced by the make-temp-file from Emacs-21.
 133         (custom-create-map): Add :group arg and allow key to be a list.
 134         (define-major-mode): Removed (use define-derived-mode instead).
 135         (sml-builtin-nested-comments-flag): New var.
 136         (concatq): Remove.
 137
 138         * sml-proc.el (sml-host-name): New var.
 139         (sml-make-file-name): Replaced by `sml-compile-commands'.
 140         (sml-config-file): New var.
 141         (sml-compile-commands-alist): New var.
 142         (inferior-sml-load-hook): Removed.
 143         (sml-buffer): Query if the current buffer is not a *sml*.
 144         (inferior-sml-mode): Use minor-mode-overriding-map-alist to disable
 145         compilation-minor-mode's keybindings.
 146         (run-sml): Turn into an alias for sml-run.
 147         (sml-run): Query the user for the command.  If prefix is set (or if
 148         default value is not null) query for args and host.
 149         Use `split-string' rather than our own function.
 150         Run cmd on another host if requested and pass it an init file.
 151         Pop to the buffer at the end.
 152         (sml-args-to-list): Remove.
 153         (sml-compile): Look for special files (sml-compile-command-alist) in
 154         the current dir (and its parents) to choose a default command.
 155         Remember the command for next time in the same buffer.
 156         Make the `cd' explicit in the command so the user can change it.
 157         (sml-make-error): Fix for when `endline' is absent.
 158
 159         * sml-mode.el: Pass it through checkdoc.
 160         (sml-mode-version): Remove.
 161         (sml-load-hook): Remove.
 162         (sml-mode-info): Use `info' rather than `Info-goto-node'.
 163         (sml-keywords-regexp): Add "o".
 164         (sml-syntax-prop-table): Use `defsyntax'.
 165         (sml-font-lock-syntactic-keywords): Only use nested comments if supported.
 166         (sml-mode): Use `define-derived-mode'.
 167         (sml-electric-pipe): `sml-indent-line' -> `indent-according-to-mode'.
 168         (sml-indent-line): Use `indent-line-to'.
 169         (sml-cm-mode): New mode for CM files.
 170
 171         * Makefile: Update.
 172
 173         * sml-mode-startup.el: Remove since it's now auto-generated.
 174
 175         * sml-defs.el (sml-bindings): Remove left over C-c` binding.
 176         (sml-mode-map): Add binding for sml-drag-region (was in sml-proc.el).
 177         (sml-mode-syntax-table): Only use nested comments if supported.
 178         (sml-mode-menu): Use next-error rather than the old sml-next-error.
 179         (sml-pipehead-re): Remove "of".
 180
 181         * sml-compat.el (set-keymap-parents): Make sure it also works when
 182         called with a single keymap rather than a list.
 183         (temporary-file-directory): Add a default definition for XEmacs.
 184         (make-temp-file): New function.
 185
 186 1999-08-11  Stefan Monnier  <monnier@cs.yale.edu>
 187
 188         * release: Version 3.9.3
 189
 190         * sml-mode.texi: Somewhat update the doc.
 191
 192 1999-08-09  Stefan Monnier  <monnier@cs.yale.edu>
 193
 194         * Makefile: Update to the version of pcl-cvs.
 195
 196         * sml-proc.el: Eliminate some old unused code.
 197
 198         * sml-defs.el,sml-mode.el,sml-proc.el: Add simple customize support.
 199
 200 1999-07-07  Stefan Monnier  <monnier@cs.yale.edu>
 201
 202         * sml-proc.el (sml-update-cursor): Make sure it also works if
 203         compile.el is fixed to uses a marker.
 204
 205         * sml-mode.el (sml-indent): Fix the `fixindent'.
 206
 207 1999-06-22  Stefan Monnier  <monnier@cs.yale.edu>
 208
 209         * sml-mode-startup.el: Fix to fulfill autoload.el assumptions.
 210
 211 1999-06-21  Stefan Monnier  <monnier@cs.yale.edu>
 212
 213         * sml-defs.el (sml-bindings): Remove bindings for TAB and M-C-\.
 214
 215 1999-06-19  Stefan Monnier  <monnier@cs.yale.edu>
 216
 217         * sml-mode.el (sml-font-lock-keywords): Skip type vars in "fun 'a myfn"
 218         (sml-calculate-indentation): Add a hack to allow the user to manually
 219         override the indentation algorithm with a magic comment.
 220
 221         * sml-mode-startup.el: Update the autoloads automatically.
 222
 223 1999-06-19  Stefan Monnier  <monnier@cs.yale.edu>
 224
 225         * release: 3.9.2
 226
 227         * sml-proc.el (sml-error-regexp-alist): Fix the pathological
 228         font-locking on long lines.
 229
 230         * sml-move.el (sml-forward-sexp): Slightly improved.
 231
 232 1999-06-17  Stefan Monnier  <monnier@cs.yale.edu>
 233
 234         * sml-mode.el (sml-insert-form): Only add a space if needed.
 235         (sml-electric-space): New command bound to M-SPC.
 236
 237         * sml-defs.el (sml-close-paren): Add a second field that specifies when
 238         not to delegate.  Only used for `else'.
 239
 240 1999-06-16  Stefan Monnier  <monnier@cs.yale.edu>
 241
 242         * sml-move.el (sml-(for|back)ward-sym): Distinguish between
 243         operator "=" and syntax for definitions "d=".
 244
 245         * sml-defs.el (sml-indent-starters, sml-delegate): Simplify.
 246         (sml-symbol-indent): Add outdentation for `fn' and generalize it to
 247         also work for `of' and `in' and `end'.
 248
 249         * sml-mode.el (sml-nested-if-indent): Reintroduce as well as the
 250         special casing code for it.
 251         (sml-indent-relative): Generalize treatment of `of', `in', `end', ...
 252         (sml-electric-pipe): Remove the slow behavior and add smarts for the
 253         never-used type-variable arguments for function definitions.
 254
 255 1999-06-15  Stefan Monnier  <monnier@cs.yale.edu>
 256
 257         * sml-defs.el (sml-mode-menu), sml-mode.el (sml-forms-menu):
 258         Make the menu dynamically.
 259
 260         * sml-mode.el (sml-form-<foo>): Use skeletons.
 261         (sml-calculate-indentation): Add `with' indentation.
 262
 263 1999-06-14  Stefan Monnier  <monnier@cs.yale.edu>
 264
 265         * sml-move.el (sml-(for|back)ward-sym): Now also return the string
 266         if any and take care of the "op" special keyword.
 267         (sml-op-prec): Setup an alist for the infix operators.
 268
 269         * version 3.9.1:  sent to Roland McGrath.
 270
 271 1999-06-13  Stefan Monnier  <monnier@cs.yale.edu>
 272
 273         * sml-smlnj.el, sml-mosml.el, sml-poly-ml.el: Remove.
 274
 275         * sml-proc.el (...): Get rid of sml-next-error by spicing up the
 276         interface with compile.el so that intervals can be displayed.
 277         `sml-overlay' is kept (and moved from sml-mode to sml-proc where it
 278         belongs) but is made redundant in the case of transient-mark-mode.
 279
 280 1999-06-12  Stefan Monnier  <monnier@cs.yale.edu>
 281
 282         * sml-proc.el (sml-prompt-regexp): More general regexp to catch mosml,
 283         smlnj as well as polyml prompts.
 284         (sml-update-cursor, sml-send-command, inferior-sml-mode):
 285         Make it work with compile.el's `next-error'.
 286         (sml-temp-threshold): Dropped: Always use a temp file.
 287
 288 1999-06-10  Stefan Monnier  <monnier@cs.yale.edu>
 289
 290         * sml-move.el (sml-op-prec): Update the list of default infix ops
 291         based on sml/nj's source files.
 292
 293 1999-06-08  Stefan Monnier  <monnier@cs.yale.edu>
 294
 295         * sml-proc.el (sml-run): Remove dubious code to take care of a
 296         supposedly special case in order not to send "" when args=nil.
 297
 298 1999-06-07  Stefan Monnier  <monnier@cs.yale.edu>
 299
 300         * sml-mode.el (sml-font-lock-syntactic-keywords): Add syntactic
 301         fontification for the '   \"' case (exhibited by lexgen.sml).
 302
 303 1999-06-07  Stefan Monnier  <monnier@cs.yale.edu>
 304
 305         * ALL: The new indentation begins to work.  v3_9_0
 306
 307 1999-05-29  Stefan Monnier  <monnier@cs.yale.edu>
 308
 309         * sml-defs.el (sml-mode-syntax-table): Add ~ of prefix-syntax.
 310
 311         * sml-mode.el (sml-find-match-indent): (nilp sml-type-of-indent) is
 312         only applied if the `let' is alone at the end of the line.
 313         (sml-type-of-indent): Default changed to `nil'.
 314
 315 1999-05-28  Stefan Monnier  <monnier@cs.yale.edu>
 316
 317         * sml-mode.el (sml-font-lock-keywords): Change _ and ' back to word
 318         syntax for font-locking.
 319
 320 1999-05-27  Stefan Monnier  <monnier@cs.yale.edu>
 321
 322         * sml-mode.el (sml-font-lock-syntactic-keywords): Finally got the
 323         matching of let...end working.
 324         (sml-electric-pipe): Take a fun sexp (symbol) rather than a fun word.
 325
 326 1998-10-26  Stefan Monnier  <monnier@cs.yale.edu>
 327
 328         * sml-mode.el (sml-font-lock-syntactic-keywords):
 329         Add syntactic-keywords to support nested comments.
 330