code.delx.au - gnu-emacs/blob - doc/emacs/Makefile.in

   1 ### @configure_input@
   2
   3 # Copyright (C) 1994, 1996-2014 Free Software Foundation, Inc.
   4
   5 # This file is part of GNU Emacs.
   6
   7 # GNU Emacs is free software: you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation, either version 3 of the License, or
  10 # (at your option) any later version.
  11
  12 # GNU Emacs is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16
  17 # You should have received a copy of the GNU General Public License
  18 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
  19
  20 SHELL = @SHELL@
  21
  22 # NB If you add any more configure variables,
  23 # update the sed rules in the dist target below.
  24
  25 # Where to find the source code.  $(srcdir) will be the doc/emacs subdirectory
  26 # of the source tree.  This is set by configure's `--srcdir' option.
  27 srcdir=@srcdir@
  28
  29 # Only for make dist.
  30 version=@version@
  31
  32 ## Where the output files go.
  33 ## Note that the setfilename command in the .texi files assumes this.
  34 ## This is a bit funny.  Because the info files are in the
  35 ## distribution tarfiles, they are always made in $scrdir/../../info,
  36 ## even for out-of-tree builds.
  37 buildinfodir = $(srcdir)/../../info
  38 # Directory with the (customized) texinfo.tex file.
  39 texinfodir = $(srcdir)/../misc
  40
  41 prefix = @prefix@
  42 datarootdir = @datarootdir@
  43 datadir = @datadir@
  44 PACKAGE_TARNAME = @PACKAGE_TARNAME@
  45 docdir = @docdir@
  46 dvidir = @dvidir@
  47 htmldir = @htmldir@
  48 pdfdir = @pdfdir@
  49 psdir = @psdir@
  50
  51 MKDIR_P = @MKDIR_P@
  52
  53 GZIP_PROG = @GZIP_PROG@
  54
  55 HTML_OPTS = --no-split --html
  56
  57 # Options used only when making info output.
  58 # --no-split is only needed because of MS-DOS.
  59 # For a possible alternative, see
  60 # http://lists.gnu.org/archive/html/emacs-devel/2011-01/msg01182.html
  61 INFO_OPTS= --no-split
  62
  63 INSTALL = @INSTALL@
  64 INSTALL_DATA = @INSTALL_DATA@
  65
  66 # The makeinfo program is part of the Texinfo distribution.
  67 # Use --force so that it generates output even if there are errors.
  68 MAKEINFO = @MAKEINFO@
  69 MAKEINFO_OPTS = --force --enable-encoding -I $(srcdir)
  70
  71 TEXI2DVI = texi2dvi
  72 TEXI2PDF = texi2pdf
  73 DVIPS = dvips
  74
  75
  76 ENVADD = TEXINPUTS="$(srcdir):$(texinfodir):$(TEXINPUTS)" \
  77          MAKEINFO="$(MAKEINFO) $(MAKEINFO_OPTS)"
  78
  79 DVI_TARGETS = emacs.dvi emacs-xtra.dvi
  80 HTML_TARGETS = emacs.html
  81 PDF_TARGETS = emacs.pdf emacs-xtra.pdf
  82 PS_TARGETS = emacs.ps emacs-xtra.ps
  83
  84 EMACS_XTRA= \
  85         ${srcdir}/emacs-xtra.texi \
  86         $(srcdir)/arevert-xtra.texi \
  87         $(srcdir)/cal-xtra.texi \
  88         $(srcdir)/dired-xtra.texi \
  89         $(srcdir)/picture-xtra.texi \
  90         $(srcdir)/emerge-xtra.texi \
  91         $(srcdir)/vc-xtra.texi \
  92         $(srcdir)/vc1-xtra.texi \
  93         $(srcdir)/fortran-xtra.texi \
  94         $(srcdir)/msdos-xtra.texi
  95
  96 EMACSSOURCES= \
  97         ${srcdir}/emacs.texi \
  98         ${srcdir}/emacsver.texi \
  99         ${srcdir}/doclicense.texi \
 100         ${srcdir}/gpl.texi \
 101         ${srcdir}/screen.texi \
 102         ${srcdir}/commands.texi \
 103         ${srcdir}/entering.texi \
 104         ${srcdir}/basic.texi \
 105         ${srcdir}/mini.texi \
 106         ${srcdir}/m-x.texi \
 107         ${srcdir}/help.texi \
 108         ${srcdir}/mark.texi \
 109         ${srcdir}/killing.texi \
 110         ${srcdir}/regs.texi \
 111         ${srcdir}/display.texi \
 112         ${srcdir}/search.texi \
 113         ${srcdir}/fixit.texi \
 114         ${srcdir}/files.texi \
 115         ${srcdir}/buffers.texi \
 116         ${srcdir}/windows.texi \
 117         ${srcdir}/frames.texi \
 118         ${srcdir}/mule.texi \
 119         ${srcdir}/modes.texi \
 120         ${srcdir}/indent.texi \
 121         ${srcdir}/text.texi \
 122         ${srcdir}/programs.texi \
 123         ${srcdir}/building.texi \
 124         ${srcdir}/maintaining.texi \
 125         ${srcdir}/abbrevs.texi \
 126         ${srcdir}/sending.texi \
 127         ${srcdir}/rmail.texi \
 128         ${srcdir}/dired.texi \
 129         ${srcdir}/calendar.texi \
 130         ${srcdir}/misc.texi \
 131         ${srcdir}/package.texi \
 132         ${srcdir}/custom.texi \
 133         ${srcdir}/trouble.texi \
 134         ${srcdir}/cmdargs.texi \
 135         ${srcdir}/xresources.texi \
 136         ${srcdir}/anti.texi \
 137         ${srcdir}/macos.texi \
 138         ${srcdir}/msdos.texi \
 139         ${srcdir}/gnu.texi \
 140         ${srcdir}/glossary.texi \
 141         ${srcdir}/ack.texi \
 142         ${srcdir}/kmacro.texi \
 143         $(EMACS_XTRA)
 144
 145 ## Disable implicit rules.
 146 %.texi: ;
 147
 148 .PHONY: info dvi html pdf ps
 149
 150 info: $(buildinfodir)/emacs.info
 151 dvi: $(DVI_TARGETS)
 152 html: $(HTML_TARGETS)
 153 pdf: $(PDF_TARGETS)
 154 ps: $(PS_TARGETS)
 155
 156 ## The info/ directory exists in release tarfiles but not the repository.
 157 ${buildinfodir}:
 158         ${MKDIR_P} $@
 159
 160 # Note that all the Info targets build the Info files in srcdir.
 161 # There is no provision for Info files to exist in the build directory.
 162 # In a distribution of Emacs, the Info files should be up to date.
 163 $(buildinfodir)/emacs.info: ${EMACSSOURCES} | ${buildinfodir}
 164         $(MAKEINFO) $(MAKEINFO_OPTS) $(INFO_OPTS) -o $@ $<
 165
 166 emacs.dvi: ${EMACSSOURCES}
 167         $(ENVADD) $(TEXI2DVI) $<
 168
 169 emacs.pdf: ${EMACSSOURCES}
 170         $(ENVADD) $(TEXI2PDF) $<
 171
 172 emacs.html: ${EMACSSOURCES}
 173         $(MAKEINFO) $(MAKEINFO_OPTS) $(HTML_OPTS) -o $@ $<
 174
 175 emacs-xtra.dvi: $(EMACS_XTRA)
 176         $(ENVADD) $(TEXI2DVI) $<
 177
 178 emacs-xtra.pdf: $(EMACS_XTRA)
 179         $(ENVADD) $(TEXI2PDF) $<
 180
 181 %.ps: %.dvi
 182         $(DVIPS) -o $@ $<
 183
 184 .PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean infoclean
 185
 186 ## Temp files.
 187 mostlyclean:
 188         rm -f *.aux *.log *.toc *.cp *.cps *.fn *.fns *.ky *.kys \
 189           *.op *.ops *.pg *.pgs *.tp *.tps *.vr *.vrs
 190
 191 ## Products not in the release tarfiles.
 192 clean: mostlyclean
 193         rm -f $(DVI_TARGETS) $(HTML_TARGETS) $(PDF_TARGETS) $(PS_TARGETS)
 194         rm -f emacs-manual-${version}.tar*
 195
 196 distclean: clean
 197         rm -f Makefile
 198
 199 ## In the standalone tarfile, the clean rule runs this.
 200 infoclean:
 201         rm -f \
 202           $(buildinfodir)/emacs.info \
 203           $(buildinfodir)/emacs.info-[1-9] \
 204           $(buildinfodir)/emacs.info-[1-9][0-9]
 205
 206 bootstrap-clean maintainer-clean: distclean infoclean
 207
 208 .PHONY: dist
 209
 210 ## Make a standalone tarfile of the Emacs manual sources.
 211 ## The [c] is a dumb way to prevent configure expanding it.
 212 ## TODO this is getting increasingly lengthy; not sure it is worth keeping.
 213 dist:
 214         rm -rf emacs-manual-${version}
 215         mkdir emacs-manual-${version}
 216         cp ${srcdir}/*.texi ${texinfodir}/texinfo.tex \
 217           ${srcdir}/ChangeLog* emacs-manual-${version}/
 218         sed -e 's/@sr[c]dir@/./' -e 's/^\(texinfodir *=\).*/\1 ./' \
 219           -e 's/^\(buildinfodir *=\).*/\1 ./' \
 220           -e 's/^\(clean:.*\)/\1 infoclean/' \
 221           -e "s/@ver[s]ion@/${version}/" \
 222           -e 's/@MAKE[I]NFO@/makeinfo/' -e 's/@MK[D]IR_P@/mkdir -p/' \
 223           -e 's/@IN[F]O_EXT@/.info/' -e 's/@IN[F]O_OPTS@//' \
 224           -e 's|@SH[E]LL@|/bin/bash|' \
 225           -e 's|@[p]refix@|/usr/local|' \
 226           -e 's|@[d]atarootdir@|$${prefix}/share|' \
 227           -e 's|@[d]atadir@|$${datarootdir}|' \
 228           -e 's|@[P]ACKAGE_TARNAME@|emacs|' \
 229           -e 's|@[d]ocdir@|$${datarootdir}/doc/$${PACKAGE_TARNAME}|' \
 230           -e 's|@[d]vidir@|$${docdir}|' \
 231           -e 's|@[h]tmldir@|$${docdir}|' \
 232           -e 's|@[p]dfdir@|$${docdir}|' \
 233           -e 's|@[p]sdir@|$${docdir}|' \
 234           -e 's|@[G]ZIP_PROG@|gzip|' \
 235           -e 's|@IN[S]TALL@|install -c|' \
 236           -e 's|@IN[S]TALL_DATA@|$${INSTALL} -m 644|' \
 237           -e '/@[c]onfigure_input@/d' \
 238           ${srcdir}/Makefile.in > emacs-manual-${version}/Makefile
 239         @if grep '@[a-zA-Z_]*@' emacs-manual-${version}/Makefile; then \
 240           echo "Unexpanded configure variables in Makefile?" 1>&2; exit 1; \
 241         fi
 242         tar -cf emacs-manual-${version}.tar emacs-manual-${version}
 243         rm -rf emacs-manual-${version}
 244
 245
 246 .PHONY: install-dvi install-html install-pdf install-ps install-doc
 247
 248 install-dvi: dvi
 249         umask 022; $(MKDIR_P) "$(DESTDIR)$(dvidir)"
 250         $(INSTALL_DATA) $(DVI_TARGETS) "$(DESTDIR)$(dvidir)"
 251 install-html: html
 252         umask 022; $(MKDIR_P) "$(DESTDIR)$(htmldir)"
 253         $(INSTALL_DATA) $(HTML_TARGETS) "$(DESTDIR)$(htmldir)"
 254 install-pdf: pdf
 255          umask 022;$(MKDIR_P) "$(DESTDIR)$(pdfdir)"
 256         $(INSTALL_DATA) $(PDF_TARGETS) "$(DESTDIR)$(pdfdir)"
 257 install-ps: ps
 258         umask 022; $(MKDIR_P) "$(DESTDIR)$(psdir)"
 259         for file in $(PS_TARGETS); do \
 260           $(INSTALL_DATA) $${file} "$(DESTDIR)$(psdir)"; \
 261           [ -n "${GZIP_PROG}" ] || continue; \
 262           rm -f "$(DESTDIR)$(psdir)/$${file}.gz"; \
 263           ${GZIP_PROG} -9n "$(DESTDIR)$(psdir)/$${file}"; \
 264         done
 265
 266 ## Top-level Makefile installs the info pages.
 267 install-doc: install-dvi install-html install-pdf install-ps
 268
 269
 270 .PHONY: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps uninstall-doc
 271
 272 uninstall-dvi:
 273         for file in $(DVI_TARGETS); do \
 274           rm -f "$(DESTDIR)$(dvidir)/$${file}"; \
 275         done
 276 uninstall-html:
 277         for file in $(HTML_TARGETS); do \
 278           rm -f "$(DESTDIR)$(htmldir)/$${file}"; \
 279         done
 280 uninstall-ps:
 281         ext= ; [ -n "${GZIP_PROG}" ] && ext=.gz; \
 282         for file in $(PS_TARGETS); do \
 283           rm -f "$(DESTDIR)$(psdir)/$${file}$${ext}"; \
 284         done
 285 uninstall-pdf:
 286         for file in $(PDF_TARGETS); do \
 287           rm -f "$(DESTDIR)$(pdfdir)/$${file}"; \
 288         done
 289
 290 uninstall-doc: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps
 291
 292
 293 ### Makefile ends here