code.delx.au - gnu-emacs/blob - configure1.in

   1
   2 ### The above line is deliberately left blank.  If it starts with a #,
   3 ### some CSH's will think this is a csh script.
   4
   5 #### Configuration script for GNU Emacs
   6 #### Copyright (C) 1992 Free Software Foundation, Inc.
   7
   8 ### This file is part of GNU Emacs.
   9
  10 ### GNU Emacs is free software; you can redistribute it and/or modify
  11 ### it under the terms of the GNU General Public License as published by
  12 ### the Free Software Foundation; either version 1, or (at your option)
  13 ### any later version.
  14
  15 ### GNU Emacs is distributed in the hope that it will be useful,
  16 ### but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 ### MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18 ### GNU General Public License for more details.
  19
  20 ### You should have received a copy of the GNU General Public License
  21 ### along with GNU Emacs; see the file COPYING.  If not, write to
  22 ### the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  23
  24 ### Shell script to edit files and make symlinks in preparation for
  25 ### compiling Emacs.
  26 ###
  27 ### Usage: configure config_name
  28 ###
  29 ### If configure succeeds, it leaves its status in config.status.
  30 ### If configure fails after disturbing the status quo,
  31 ###     config.status is removed.
  32
  33
  34 ### Remove any more than one leading "." element from the path name.
  35 ### If we don't remove them, then another "./" will be prepended to
  36 ### the file name each time we use config.status, and the program name
  37 ### will get larger and larger.  This wouldn't be a problem, except
  38 ### that since progname gets recorded in all the Makefiles this script
  39 ### produces, move-if-change thinks they're different when they're
  40 ### not.
  41 ###
  42 ### It would be nice if we could put the ./ in a \( \) group and then
  43 ### apply the * operator to that, so we remove as many leading ./././'s
  44 ### as are present, but some seds (like Ultrix's sed) don't allow you to
  45 ### apply * to a \( \) group.  Bleah.
  46 progname="`echo $0 | sed 's:^\./\./:\./:'`"
  47
  48
  49 #### Usage messages.
  50
  51 short_usage="Type \`${progname} --usage' for more information about options."
  52
  53 long_usage="Usage: ${progname} CONFIGURATION [-OPTION[=VALUE] ...]
  54
  55 Set compilation and installation parameters for GNU Emacs, and report.
  56 CONFIGURATION specifies the machine and operating system to build for.
  57 For example:
  58         ${progname} sparc-sun-sunos4.1
  59 configures Emacs to build on a Sun Sparc machine running SunOS 4.1, and
  60         ${progname} decstation
  61 configures Emacs to run on a DECstation running Ultrix.  See \`etc/MACHINES'.
  62
  63 The --with-x, --with-x11 and --with-x10 options specify what window
  64         system to use; if all are omitted, use X11 if present.  If you
  65         don't want X, specify \`--with-x=no'.
  66
  67 The --x-includes=DIR option tells the build process where to search
  68         for the X Windows header files.  DIR should have a
  69         subdirectory called \`X11' which contains \`X.h', \`Xlib.h', and
  70         the rest of the header files; DIR should not contain \`X11'
  71         itself.  If this option is omitted, the build process assumes
  72         they exist in a directory the compiler checks by default.
  73
  74 The --x-libraries=DIR option tells the build process where to look for
  75         the X windows libraries.  If this option is omitted, the build
  76         process assumes they are in a directory the compiler checks by
  77         default.
  78
  79 The --with-gcc option says that the build process should use GCC to
  80         compile Emacs.  If you have GCC but don't want to use it,
  81         specify \`--with-gcc=no'.  \`configure' tries to guess whether
  82         or not you have GCC by searching your executable path, but if
  83         it guesses incorrectly, you may need to use this.
  84
  85 The --srcdir=DIR option specifies that the configuration and build
  86         processes should look for the Emacs source code in DIR, when
  87         DIR is not the current directory.  This option doesn't work yet.
  88
  89 If successful, ${progname} leaves its status in config.status.  If
  90 unsuccessful after disturbing the status quo, it removes config.status."
  91
  92
  93 #### Option processing.
  94
  95 ### These are the names of CPP symbols we want to define or leave undefined
  96 ### in src/config.h; their values are given by the shell variables of the same
  97 ### names.
  98 config_h_opts=" \
  99 HAVE_X_WINDOWS HAVE_X11 HAVE_X_MENU \
 100 SIGTYPE GNU_MALLOC REL_ALLOC LISP_FLOAT_TYPE HAVE_CONST \
 101 LD_SWITCH_X_SITE C_SWITCH_X_SITE HAVE_XFREE386"
 102
 103 ### Record all the arguments, so we can save them in config.status.
 104 arguments="$@"
 105
 106 while [ $# != 0 ]; do
 107   arg="$1"
 108   case "${arg}" in
 109
 110     ## Anything starting with a hyphen we assume is an option.
 111     -* )
 112
 113       ## Separate the switch name from the value it's being given.
 114       case "${arg}" in
 115         -*=*)
 116           opt=`echo ${arg} | sed 's:^-*\([^=]*\)=.*$:\1:'`
 117           val=`echo ${arg} | sed 's:^-*[^=]*=\(.*\)$:\1:'`
 118           valomitted=no
 119         ;;
 120         -*)
 121           ## If FOO is a boolean argument, --FOO is equivalent to
 122           ## --FOO=yes.  Otherwise, the value comes from the next
 123           ## argument - see below.
 124           opt=`echo ${arg} | sed 's:^-*\(.*\)$:\1:'`
 125           val="yes"
 126           valomitted=yes
 127         ;;
 128       esac
 129
 130       ## Change `-' in the option name to `_'.
 131       optname="${opt}"
 132       opt="`echo ${opt} | tr - _`"
 133
 134       ## Process the option.
 135       case "${opt}" in
 136
 137         ## Has the user specified which window systems they want to support?
 138         "with_x" | "with_x11" | "with_x10" )
 139           ## Make sure the value given was either "yes" or "no".
 140           case "${val}" in
 141             y | ye | yes )      val=yes ;;
 142             n | no )            val=no  ;;
 143             * )
 144               (echo "${progname}: the \`--${optname}' option is supposed to have a boolean value.
 145 Set it to either \`yes' or \`no'."
 146                echo "${short_usage}") >&2
 147               exit 1
 148             ;;
 149           esac
 150           eval "${opt}=\"${val}\""
 151         ;;
 152
 153         ## Has the user specified whether or not they want GCC?
 154         "with_gcc" )
 155           ## Make sure the value given was either "yes" or "no".
 156           case "${val}" in
 157             y | ye | yes )      val=yes ;;
 158             n | no )            val=no  ;;
 159             * )
 160               (echo "${progname}: the \`--${optname}' option is supposed to have a boolean value.
 161 Set it to either \`yes' or \`no'."
 162                echo "${short_usage}") >&2
 163               exit 1
 164             ;;
 165           esac
 166           eval "${opt}=\"${val}\""
 167         ;;
 168
 169         ## Has the user specified a source directory?
 170         "srcdir" )
 171           ## If the value was omitted, get it from the next argument.
 172           if [ "${valomitted}" = "yes" ]; then
 173             ## Get the next argument from the argument list, if there is one.
 174             if [ $# = 1 ]; then
 175               (echo "${progname}: You must give a value for the \`--${optname}' option, as in
 176     \`--${optname}=FOO'."
 177                echo "${short_usage}") >&2
 178               exit 1
 179             fi
 180             shift; val="$1"
 181           fi
 182           srcdir="${val}"
 183
 184           echo "${progname}: Beware - the \`--srcdir' option doesn't work yet." >&2
 185         ;;
 186
 187         ## Has the user tried to tell us where the X files are?
 188         ## I think these are dopey, but no less than three alpha
 189         ## testers, at large sites, have said they have their X files
 190         ## installed in odd places.
 191         "x_includes" )
 192           ## If the value was omitted, get it from the next argument.
 193           if [ "${valomitted}" = "yes" ]; then
 194             ## Get the next argument from the argument list, if there is one.
 195             if [ $# = 1 ]; then
 196               (echo "${progname}: You must give a value for the \`--${optname}' option, as in
 197     \`--${optname}=FOO'."
 198                echo "${short_usage}") >&2
 199               exit 1
 200             fi
 201             shift; val="$1"
 202           fi
 203           x_includes="${val}"
 204           C_SWITCH_X_SITE="-I${x_includes}"
 205         ;;
 206         "x_libraries" )
 207           ## If the value was omitted, get it from the next argument.
 208           if [ "${valomitted}" = "yes" ]; then
 209             ## Get the next argument from the argument list, if there is one.
 210             if [ $# = 1 ]; then
 211               (echo "${progname}: You must give a value for the \`--${optname}' option, as in
 212     \`--${optname}=FOO'."
 213                echo "${short_usage}") >&2
 214               exit 1
 215             fi
 216             shift; val="$1"
 217           fi
 218           x_libraries="${val}"
 219           LD_SWITCH_X_SITE="-L${x_libraries}"
 220         ;;
 221
 222         ## Has the user asked for some help?
 223         "usage" | "help" )
 224           echo "${long_usage}" | more
 225           exit
 226         ;;
 227
 228         ## We ignore all other options silently.
 229       esac
 230     ;;
 231
 232     ## Anything not starting with a hyphen we assume is a
 233     ## configuration name.
 234     *)
 235       configuration=${arg}
 236     ;;
 237
 238   esac
 239   shift
 240 done
 241
 242 if [ "${configuration}" = "" ]; then
 243   (echo "${progname}: You must specify a configuration name as an argument."
 244    echo "${short_usage}") >&2
 245   exit 1
 246 fi
 247
 248
 249 #### Decide where the source is.
 250 case "${srcdir}" in
 251
 252   ## If it's not specified, see if  `.' or `..' might work.
 253   "" )
 254     if [ -f "./src/lisp.h" -a -f "./lisp/version.el" ]; then
 255       srcdir=`pwd`
 256     else
 257       if [ -f "../src/lisp.h" -a -f "../lisp/version.el" ]; then
 258         srcdir=`(cd .. ; pwd)`
 259       else
 260         (echo "\
 261 ${progname}: Neither the current directory nor its parent seem to
 262 contain the Emacs sources.  If you do not want to build Emacs in its
 263 source tree, you should run \`${progname}' in the directory in which
 264 you wish to build Emacs, using its \`--srcdir' option to say where the
 265 sources may be found."
 266          echo "${short_usage}") >&2
 267         exit 1
 268       fi
 269     fi
 270   ;;
 271
 272   ## Otherwise, check if the directory they specified is okay.
 273   * )
 274     if [ ! -d "${srcdir}" -o ! -f "${srcdir}/src/lisp.h" -o ! -f "${srcdir}/lisp/version.el" ]; then
 275       (echo "\
 276 ${progname}: The directory specified with the \`--srcdir' option,
 277 \`${srcdir}', doesn't seem to contain the Emacs sources.  You should
 278 either run the \`${progname}' script at the top of the Emacs source
 279 tree, or use the \`--srcdir' option to specify where the Emacs sources
 280 are."
 281        echo "${short_usage}") >&2
 282       exit 1
 283     fi
 284   ;;
 285
 286 esac
 287
 288 ### Make the necessary directories, if they don't exist.
 289 if [ ! -d ./src ]; then
 290   mkdir ./src
 291 fi
 292 if [ ! -d ./lib-src ]; then
 293   mkdir ./lib-src
 294 fi
 295 if [ ! -d ./cpp ]; then
 296   mkdir ./cpp
 297 fi
 298 if [ ! -d ./oldXMenu ]; then
 299   mkdir ./oldXMenu
 300 fi
 301
 302
 303 #### Given the configuration name, set machfile and opsysfile to the
 304 #### names of the m/*.h and s/*.h files we should use.
 305
 306 ### Canonicalize the configuration name.
 307 echo "Checking the configuration name."
 308 if configuration=`${srcdir}/config.sub "${configuration}"` ; then : ; else
 309   exit $?
 310 fi
 311
 312 ### If you add support for a new configuration, add code to this
 313 ### switch statement to recognize your configuration name and select
 314 ### the appropriate operating system and machine description files.
 315
 316 ### You would hope that you could choose an m/*.h file pretty much
 317 ### based on the machine portion of the configuration name, and an s-
 318 ### file based on the operating system portion.  However, it turns out
 319 ### that each m/*.h file is pretty manufacturer-specific - for
 320 ### example, apollo.h, hp9000s300.h, mega68k, news.h, and tad68k are
 321 ### all 68000 machines; mips.h, pmax.h, and news-risc are all MIPS
 322 ### machines.  So we basically have to have a special case for each
 323 ### configuration name.
 324 ###
 325 ### As far as handling version numbers on operating systems is
 326 ### concerned, make sure things will fail in a fixable way.  If
 327 ### /etc/MACHINES doesn't say anything about version numbers, be
 328 ### prepared to handle anything reasonably.  If version numbers
 329 ### matter, be sure /etc/MACHINES says something about it.
 330 ###
 331 ### Eric Raymond says we should accept strings like "sysvr4" to mean
 332 ### "System V Release 4"; he writes, "The old convention encouraged
 333 ### confusion between `system' and `release' levels'."
 334
 335 machine='' opsys='' unported='false'
 336 case "${configuration}" in
 337
 338   ## Alliant machines
 339   ## Strictly speaking, we need the version of the alliant operating
 340   ## system to choose the right machine file, but currently the
 341   ## configuration name doesn't tell us enough to choose the right
 342   ## one; we need to give alliants their own operating system name to
 343   ## do this right.  When someone cares, they can help us.
 344   fx80-alliant-* )
 345     machine=alliant4 opsys=bsd4-2
 346   ;;
 347   i860-alliant-* )
 348     machine=alliant-2800 opsys=bsd4-3
 349   ;;
 350
 351   ## Altos 3068
 352   m68*-altos-sysv* )
 353     machine=altos opsys=usg5-2
 354   ;;
 355
 356   ## Amdahl UTS
 357   580-amdahl-sysv* )
 358     machine=amdahl opsys=usg5-2-2
 359   ;;
 360
 361   ## Appallings - I mean, Apollos - running Domain
 362   m68*-apollo* )
 363     machine=apollo opsysfile=bsd4-2.h
 364   ;;
 365
 366   ## AT&T 3b2, 3b5, 3b15, 3b20
 367   we32k-att-sysv* )
 368     machine=att3b opsys=usg5-2-2
 369   ;;
 370
 371   ## AT&T 3b1 - The Mighty Unix PC!
 372   m68*-att-sysv* )
 373     machine=7300 opsys=usg5-2-2
 374   ;;
 375
 376   ## Bull sps7
 377   m68*-bull-sysv* )
 378     machine=sps7 opsys=usg5-2
 379   ;;
 380
 381   ## CCI 5/32, 6/32 -- see "Tahoe".
 382
 383   ## Celerity
 384   ## I don't know what configuration name to use for this; config.sub
 385   ## doesn't seem to know anything about it.  Hey, Celerity users, get
 386   ## in touch with us!
 387   celerity-celerity-bsd* )
 388     machine=celerity opsys=bsd4-2
 389   ;;
 390
 391   ## Clipper
 392   ## What operating systems does this chip run that Emacs has been
 393   ## tested on?
 394   clipper-* )
 395     machine=clipper
 396     ## We'll use the catch-all code at the bottom to guess the
 397     ## operating system.
 398   ;;
 399
 400   ## Convex
 401   *-convex-bsd* )
 402     machine=convex opsys=bsd4-3
 403   ;;
 404
 405   ## Cubix QBx/386
 406   i386-cubix-sysv* )
 407     machine=intel386 opsys=usg5-3
 408   ;;
 409
 410   ## Cydra 5
 411   cydra*-cydrome-sysv* )
 412     machine=cydra5 opsys=usg5-3
 413   ;;
 414
 415   ## DECstations
 416   mips-dec-ultrix[0-3].* | mips-dec-ultrix4.0 | mips-dec-bsd4.2 )
 417     machine=pmax opsys=bsd4-2
 418   ;;
 419   mips-dec-ultrix* | mips-dec-bsd* )
 420     machine=pmax opsys=bsd4-3
 421   ;;
 422   mips-dec-osf* )
 423     machine=pmax opsys=osf1
 424   ;;
 425
 426   ## Motorola Delta machines
 427   m68*-motorola-sysv* )
 428     machine=delta opsys=usg5-3
 429   ;;
 430   m88k-motorola-sysv* | m88k-motorola-m88kbcs* )
 431     machine=delta88k opsys=usg5-3
 432   ;;
 433
 434   ## Dual machines
 435   m68*-dual-sysv* )
 436     machine=dual opsys=usg5-2
 437   ;;
 438   m68*-dual-uniplus* )
 439     machine=dual opsys=unipl5-2
 440   ;;
 441
 442   ## Elxsi 6400
 443   elxsi-elxsi-sysv* )
 444     machine=elxsi opsys=usg5-2
 445   ;;
 446
 447   ## Encore machines
 448   ns16k-encore-bsd* )
 449     machine=ns16000 opsys=umax
 450   ;;
 451
 452   ## The GEC 93 - apparently, this port isn't really finished yet.
 453
 454   ## Gould Power Node and NP1
 455   pn-gould-bsd4.2 )
 456     machine=gould opsys=bsd4-2
 457   ;;
 458   pn-gould-bsd4.3 )
 459     machine=gould opsys=bsd4-3
 460   ;;
 461   np1-gould-bsd* )
 462     machine=gould-np1 opsys=bsd4-3
 463   ;;
 464
 465   ## Honeywell XPS100
 466   xps*-honeywell-sysv* )
 467     machine=xps100 opsys=usg5-2
 468   ;;
 469
 470   ## HP 9000 series 200 or 300
 471   m68*-hp-bsd* )
 472     machine=hp9000s300 opsys=bsd4-3
 473   ;;
 474   ## HP/UX 8 doesn't run on these machines, so use HP/UX 7.
 475   m68*-hp-hpux* )
 476     machine=hp9000s300 opsys=hpux
 477   ;;
 478
 479   ## HP 9000 series 800, running HP/UX
 480   hppa1.0-hp-hpux* )
 481     machine=hp9000s800 opsys=hpux
 482   ;;
 483
 484   ## Orion machines
 485   orion-orion-bsd* )
 486     machine=orion opsys=bsd4-2
 487   ;;
 488   clipper-orion-bsd* )
 489     machine=orion105 opsys=bsd4-2
 490   ;;
 491
 492   ## IBM machines
 493   i386-ibm-aix1.1 )
 494     machine=ibmps2-aix opsys=usg5-2-2
 495   ;;
 496   i386-ibm-aix1.2 )
 497     machine=ibmps2-aix opsys=usg5-3
 498   ;;
 499   rs6000-ibm-aix3.1 )
 500     machine=ibmrs6000 opsys=aix3-1
 501   ;;
 502   rs6000-ibm-aix3.2 | rs6000-ibm-aix* )
 503     machine=ibmrs6000 opsys=aix3-2
 504   ;;
 505   romp-ibm-bsd* )
 506     machine=ibmrt opsys=bsd4-2
 507   ;;
 508   romp-ibm-aix* )
 509     machine=ibmrt-aix opsys=usg5-2-2
 510   ;;
 511
 512   ## Integrated Solutions `Optimum V'
 513   m68*-isi-bsd4.2 )
 514     machine=isi-ov opsys=bsd4-2
 515   ;;
 516   m68*-isi-bsd4.3 )
 517     machine=isi-ov opsys=bsd4-3
 518   ;;
 519
 520   ## Intel 386 machines where we do care about the manufacturer
 521   i[34]86-intsys-sysv* )
 522     machine=is386 opsys=usg5-2-2
 523   ;;
 524   ## Intel 386 machines where we don't care about the manufacturer
 525   i[34]86-* )
 526     machine=intel386
 527     case "${configuration}" in
 528       *-isc1.* | *-isc2.[01]* ) opsys=386-ix ;;
 529       *-isc2.2 )                opsys=isc2-2 ;;
 530       *-isc* )                  opsys=isc3-0 ;;
 531       *-esix* )                 opsys=esix ;;
 532       *-xenix* )                opsys=xenix ;;
 533       ## Otherwise, we'll fall through to the generic opsys code at the bottom.
 534     esac
 535   ;;
 536
 537   ## Silicon Graphics machines
 538   ## Iris 2500 and Iris 2500 Turbo (aka the Iris 3030)
 539   m68*-sgi-iris3.5 )
 540     machine=irist opsys=iris3-5
 541   ;;
 542   m68*-sgi-iris3.6 | m68*-sgi-iris*)
 543     machine=irist opsys=iris3-6
 544   ;;
 545   ## Iris 4D
 546   mips-sgi-irix3.* )
 547     machine=iris4d opsys=irix3-3
 548   ;;
 549   mips-sgi-irix4.* | mips-sgi-irix* )
 550     machine=iris4d opsys=irix4-0
 551   ;;
 552
 553   ## Masscomp machines
 554   m68*-masscomp-rtu )
 555     machine=masscomp opsys=rtu
 556   ;;
 557
 558   ## Megatest machines
 559   m68*-megatest-bsd* )
 560     machine=mega68 opsys=bsd4-2
 561   ;;
 562
 563   ## Workstations sold by MIPS
 564   ## This is not necessarily all workstations using the MIPS processor -
 565   ## Irises are produced by SGI, and DECstations by DEC.
 566
 567   ## etc/MACHINES lists mips.h and mips4.h as possible machine files,
 568   ## and usg5-2-2 and bsd4-3 as possible OS files.  The only guidance
 569   ## it gives for choosing between the alternatives seems to be "Use
 570   ## -machine=mips4 for RISCOS version 4; use -opsystem=bsd4-3 with
 571   ## the BSD world."  I'll assume that these are instructions for
 572   ## handling two odd situations, and that every other situation
 573   ## should use mips.h and usg5-2-2, they being listed first.
 574   mips-mips-riscos4* )
 575     machine=mips4 opsys=usg5-2-2
 576   ;;
 577   mips-mips-bsd* )
 578     machine=mips opsys=bsd4-3
 579   ;;
 580   mips-mips-* )
 581     machine=mips opsys=usg5-2-2
 582   ;;
 583
 584   ## The complete machine from National Semiconductor
 585   ns32k-ns-genix* )
 586     machine=ns32000 opsys=usg5-2
 587   ;;
 588
 589   ## NCR machines
 590   m68*-ncr-sysv2* | m68*-ncr-sysvr2* )
 591     machine=tower32 opsys=usg5-2-2
 592   ;;
 593   m68*-ncr-sysv3* | m68*-ncr-sysvr3* )
 594     machine=tower32v3 opsys=usg5-3
 595   ;;
 596
 597   ## Nixdorf Targon 31
 598   m68*-nixdorf-sysv* )
 599     machine=targon31 opsys=usg5-2-2
 600   ;;
 601
 602   ## Nu (TI or LMI)
 603   m68*-nu-sysv* )
 604     machine=nu opsys=usg5-2
 605   ;;
 606
 607   ## Plexus
 608   m68*-plexus-sysv* )
 609     machine=plexus opsys=usg5-2
 610   ;;
 611
 612   ## Prime EXL
 613   i386-prime-sysv* )
 614     machine=i386 opsys=usg5-3
 615   ;;
 616
 617   ## Pyramid machines
 618   ## I don't really have any idea what sort of processor the Pyramid has,
 619   ## so I'm assuming it is its own architecture.
 620   pyramid-pyramid-bsd* )
 621     machine=pyramid opsys=bsd4-2
 622   ;;
 623
 624   ## Sequent Balance
 625   ns32k-sequent-bsd4.2 )
 626     machine=sequent opsys=bsd4-2
 627   ;;
 628   ns32k-sequent-bsd4.3 )
 629     machine=sequent opsys=bsd4-3
 630   ;;
 631   ## Sequent Symmetry
 632   i386-sequent-bsd* )
 633     machine=symmetry opsys=bsd4-3
 634   ;;
 635
 636   ## SONY machines
 637   m68*-sony-bsd4.2 )
 638     machine=news opsys=bsd4-2
 639   ;;
 640   m68*-sony-bsd4.3 )
 641     machine=news opsys=bsd4-3
 642   ;;
 643   mips-sony-bsd* )
 644     machine=news-risc opsys=bsd4-3
 645   ;;
 646
 647   ## Stride
 648   m68*-stride-sysv* )
 649     machine=stride opsys=usg5-2
 650   ;;
 651
 652   ## Suns
 653   *-sun-sunos* | *-sun-bsd* )
 654     case "${configuration}" in
 655       m68*-sunos1* )    machine=sun1 ;;
 656       m68*-sunos2* )    machine=sun2 ;;
 657       m68* )            machine=sun3 ;;
 658       i[34]86* )        machine=sun386 ;;
 659       sparc* )          machine=sparc ;;
 660       * )               unported=true ;;
 661     esac
 662     case "${configuration}" in
 663       *-sunos4.0*         ) opsys=sunos4-0 ;;
 664       *-sunos4* | *-sunos ) opsys=sunos4-1 ;;
 665       *                   ) opsys=bsd4-2   ;;
 666     esac
 667   ;;
 668
 669   ## Tadpole 68k
 670   m68*-tadpole-sysv* )
 671     machine=tad68k opsys=usg5-3
 672   ;;
 673
 674   ## Tahoe machines
 675   tahoe-tahoe-bsd4.2 )
 676     machine=tahoe opsys=bsd4-2
 677   ;;
 678   tahoe-tahoe-bsd4.3 )
 679     machine=tahoe opsys=bsd4-3
 680   ;;
 681
 682   ## Tandem Integrity S2
 683   mips-tandem-sysv* )
 684     machine=tandem-s2 opsys=usg5-3
 685   ;;
 686
 687   ## Tektronix 16000 box (6130?)
 688   ns16k-tektronix-bsd* )
 689     machine=ns16000 opsys=bsd4-2
 690   ;;
 691   ## Tektronix 4300
 692   ## src/m/tek4300.h hints that this is a m68k machine.
 693   m68*-tektronix-bsd* )
 694     machine=tex4300 opsys=bsd4-3
 695   ;;
 696
 697   ## Titan P2 or P3
 698   ## We seem to have lost the machine-description file titan.h!
 699   titan-titan-sysv* )
 700     machine=titan opsys=usg5-3
 701   ;;
 702
 703   ## Ustation E30 (SS5E)
 704   m68*-unisys-uniplus* )
 705     machine=ustation opsystem=unipl5-2
 706   ;;
 707
 708   ## Vaxen.
 709   vax-dec-* )
 710     machine=vax
 711     case "${configuration}" in
 712       *-bsd4.1 )                                        opsys=bsd4-1 ;;
 713       *-bsd4.2 | *-ultrix[0-3].* | *-ultrix4.0 )        opsys=bsd4-2 ;;
 714       *-bsd4.3 | *-ultrix* )                            opsys=bsd4-3 ;;
 715       *-sysv[01]* | *-sysvr[01]* )                      opsys=usg5-0 ;;
 716       *-sysv2* | *-sysvr2* )                            opsys=usg5-2 ;;
 717       *-vms* )                                          opsys=vms ;;
 718       * )                                               unported=true
 719     esac
 720   ;;
 721
 722   ## Whitechapel MG1
 723   ns16k-whitechapel-* )
 724     machine=mg1
 725     ## We don't know what sort of OS runs on these; we'll let the
 726     ## operating system guessing code below try.
 727   ;;
 728
 729   ## Wicat
 730   m68*-wicat-sysv* )
 731     machine=wicat opsys=usg5-2
 732   ;;
 733
 734   * )
 735     unported=true
 736   ;;
 737 esac
 738
 739 ### If the code above didn't choose an operating system, just choose
 740 ### an operating system based on the configuration name.  You really
 741 ### only want to use this when you have no idea what the right
 742 ### operating system is; if you know what operating systems a machine
 743 ### runs, it's cleaner to make it explicit in the case statement
 744 ### above.
 745 if [ ! "${opsys}" ]; then
 746   case "${configuration}" in
 747     *-bsd4.[01] )       opsys=bsd4-1 ;;
 748     *-bsd4.2 )          opsys=bsd4-2 ;;
 749     *-bsd4.3 )          opsys=bsd4-3 ;;
 750     *-sysv0 | *-sysvr0 )                opsys=usg5-0 ;;
 751     *-sysv2 | *-sysvr2 )                opsys=usg5-2 ;;
 752     *-sysv2.2 | *-sysvr2.2 )            opsys=usg5-2-2 ;;
 753     *-sysv3 | *-sysvr3 )                opsys=usg5-3 ;;
 754     *-sysv4 | *-sysvr4 )                opsys=usg5-4 ;;
 755     * )
 756       unported=true
 757     ;;
 758   esac
 759 fi
 760
 761 if $unported ; then
 762   (echo "${progname}: Emacs hasn't been ported to \`${configuration}' systems."
 763    echo "${progname}: Check \`etc/MACHINES' for recognized configuration names."
 764   ) >&2
 765   exit 1
 766 fi
 767
 768 machfile="m/${machine}.h"
 769 opsysfile="s/${opsys}.h"
 770
 771
 772 #### Choose a window system.
 773 echo "Checking window system."
 774 window_system=''
 775 case "${with_x}" in
 776   yes )
 777     window_system=${window_system}x11
 778   ;;
 779   no )
 780     window_system=${window_system}none
 781 esac
 782 case "${with_x11}" in
 783   yes )
 784     window_system=${window_system}x11
 785   ;;
 786 esac
 787 case "${with_x10}" in
 788   yes )
 789     window_system=${window_system}x10
 790   ;;
 791 esac
 792
 793 case "${window_system}" in
 794   "none" | "x11" | "x10" ) ;;
 795   "" )
 796     echo "  No window system specifed.  Looking for X Windows."
 797     window_system=none
 798     if [ -r /usr/lib/libX11.a \
 799          -o -d /usr/include/X11 \
 800          -o -d /usr/X386/include ]; then
 801       window_system=x11
 802     fi
 803   ;;
 804   * )
 805     echo "Don\'t specify the window system more than once." >&2
 806     exit 1
 807   ;;
 808 esac
 809
 810 case "${window_system}" in
 811   x11 )
 812     HAVE_X_WINDOWS=yes
 813     HAVE_X11=yes
 814     echo "  Using X11."
 815   ;;
 816   x10 )
 817     HAVE_X_WINDOWS=yes
 818     HAVE_X11=no
 819     echo "  Using X10."
 820   ;;
 821   none )
 822     HAVE_X_WINDOWS=no
 823     HAVE_X11=no
 824     echo "  Using no window system."
 825   ;;
 826 esac
 827
 828 ### If we're using X11, we should use the X menu package.
 829 HAVE_X_MENU=no
 830 case ${HAVE_X11} in
 831   yes )
 832     HAVE_X_MENU=yes
 833   ;;
 834 esac
 835
 836 ### Check for XFree386.  It needs special hacks.
 837 case ${window_system} in
 838   x11 )
 839     if [ -d /usr/X386/include ]; then
 840       HAVE_XFREE386=yes
 841       if [ "${C_SWITCH_X_SITE}" = "" ]; then
 842         C_SWITCH_X_SITE="-I/usr/X386/include"
 843       fi
 844     fi
 845   ;;
 846 esac
 847
 848 #### Choose a compiler.
 849 echo "Checking compilers."
 850 if [ "${with_gcc}" = "" ]; then
 851   echo "  Searching load path for GCC."
 852   temppath=`echo $PATH | sed 's/^:/.:/
 853                               s/::/:.:/g
 854                               s/:$/:./
 855                               s/:/ /g'`
 856   default_cc=`(
 857     for dir in ${temppath}; do
 858       if [ -f ${dir}/gcc ]; then echo gcc; exit 0; fi
 859     done
 860     echo cc
 861   )`
 862 else
 863   case ${with_gcc} in
 864     "yes" ) default_cc="gcc" ;;
 865     "no"  ) default_cc="cc"  ;;
 866   esac
 867 fi
 868
 869 case "${default_cc}" in
 870   "gcc" )
 871     echo "  Using GCC."
 872     default_cflags='-g -O'
 873   ;;
 874   * )
 875     echo "  Using the system's CC."
 876     default_cflags='-g'
 877   ;;
 878 esac
 879
 880
 881 #### Does this compiler support the `const' keyword?
 882 #### The code for this test was adapted from autoconf's test.
 883 echo "Checking if the compiler supports \`const'."
 884 rm -f conftest*
 885 compile='${default_cc} conftest.c -o conftest >/dev/null 2>&1'
 886 echo "
 887 main() { exit(0); } t() { /* Ultrix mips cc rejects this.  */
 888 typedef int charset[2]; const charset x;
 889 /* SunOS 4.1.1 cc rejects this. */
 890 char const *const *p;
 891 char **p2;
 892 /* HPUX 7.0 cc rejects these. */
 893 ++p;
 894 p2 = (char const* const*) p;
 895  }" > conftest.c
 896 if eval $compile; then
 897   echo "  It seems to."
 898   HAVE_CONST=yes
 899 else
 900   echo "  It doesn't seem to."
 901   HAVE_CONST=no
 902 fi
 903 rm -f conftest*
 904
 905 #### What is the return type of a signal handler?
 906
 907 ### We run /usr/include/signal.h through cpp and grep for the
 908 ### declaration of the signal function.  Yuck.
 909 echo "Looking for return type of signal handler functions."
 910 signal_h_file=''
 911 if [ -r /usr/include/signal.h ]; then
 912   signal_h_file=/usr/include/signal.h
 913 elif [ -r /usr/include/sys/signal.h ]; then
 914   signal_h_file=/usr/include/sys/signal.h
 915 fi
 916 SIGTYPE=void
 917 if [ "${signal_h_file}" ]; then
 918   sigpattern='[         ]*([    ]*\*[   ]*signal[       ]*('
 919
 920   ## We make a copy whose name ends in .c, so the compiler
 921   ## won't complain about having only been given a .h file.
 922   tempcname="configure.tmp.$$.c"
 923   cp ${signal_h_file}  ${tempcname}
 924   if ${default_cc} -E ${tempcname} | grep "int${sigpattern}" > /dev/null; then
 925     SIGTYPE=int
 926   fi
 927   rm -f ${tempcname}
 928 fi
 929 echo "  Guessing that signals return \`${SIGTYPE}'."
 930
 931
 932 #### Extract some information from the operating system and machine files.
 933
 934 echo "Examining the machine- and system-dependent files to find out"
 935 echo " - which libraries the lib-src programs will want, and"
 936 echo " - whether the GNU malloc routines are usable."
 937 tempcname="configure.tmp.$$.c"
 938 echo '
 939 #include "'${srcdir}'/src/'${opsysfile}'"
 940 #include "'${srcdir}'/src/'${machfile}'"
 941 #ifndef LIBS_MACHINE
 942 #define LIBS_MACHINE
 943 #endif
 944 #ifndef LIBS_SYSTEM
 945 #define LIBS_SYSTEM
 946 #endif
 947 #ifndef C_SWITCH_SYSTEM
 948 #define C_SWITCH_SYSTEM
 949 #endif
 950 @configure@ libsrc_libs=LIBS_MACHINE LIBS_SYSTEM
 951 @configure@ c_switch_system=C_SWITCH_SYSTEM
 952 #ifdef SYSTEM_MALLOC
 953 @configure@ system_malloc=yes
 954 #else
 955 @configure@ system_malloc=no
 956 #endif
 957 ' > ${tempcname}
 958 eval `${default_cc} -E ${tempcname} \
 959        | grep '@configure@' \
 960        | sed -e 's/^@configure@ \([^=]*=\)\(.*\)$/\1"\2"/'`
 961 rm ${tempcname}
 962
 963 # Do the opsystem or machine files prohibit the use of the GNU malloc?
 964 # Assume not, until told otherwise.
 965 GNU_MALLOC=yes
 966 if [ "${system_malloc}" = "yes" ]; then
 967   GNU_MALLOC=no
 968   GNU_MALLOC_reason="
 969   (The GNU allocators don't work with this system configuration.)"
 970 fi
 971
 972 if [ ! "${REL_ALLOC}" ]; then
 973   REL_ALLOC=${GNU_MALLOC}
 974 fi
 975
 976 LISP_FLOAT_TYPE=yes
 977
 978
 979 #### Find out which version of Emacs this is.
 980 version=`grep 'defconst[         ]*emacs-version' ${srcdir}/lisp/version.el \
 981          | sed -e 's/^.*"\([0-9][0-9]*\.[0-9][0-9]*\)\..*$/\1/'`
 982 if [ ! "${version}" ]; then
 983   echo "${progname}: can't find current emacs version in
 984         \`${srcdir}/lisp/version.el'." >&2
 985   exit 1
 986 fi
 987
 988
 989 #### Make the proper settings in `src/config.h'.
 990 rm -f config.status
 991 set -e
 992
 993 echo "Making \`./src/config.h' from \`${srcdir}/src/config.h.in'."
 994 sed_flags="-e 's:@machine@:${machfile}:' -e 's:@opsystem@:${opsysfile}:'"
 995
 996 for flag in ${config_h_opts}; do
 997   val=`eval echo '$'${flag}`
 998   case ${val} in
 999     no | "")
1000       f="-e 's:.*#define ${flag}.*:/\\* #define ${flag} \\*/:'"
1001     ;;
1002     yes)
1003       f="-e 's:.*#define ${flag}.*:#define ${flag}:'"
1004     ;;
1005     *)
1006       f="-e 's:.*#define ${flag}.*:#define ${flag} ${val}:'"
1007     ;;
1008   esac
1009   sed_flags="${sed_flags} ${f}"
1010 done
1011
1012 rm -f ./src/config.h.tmp
1013 (echo "/* This file is generated by \`${progname}' from"
1014  echo "   \`${srcdir}/src/config.h.in'."
1015  echo "   If you are thinking about editing it, you should seriously consider"
1016  echo "   running \`${progname} instead, or editing"
1017  echo "   \`${srcdir}/src/config.h.in' itself."
1018  eval '/bin/sed '${sed_flags}' < "${srcdir}/src/config.h.in"'
1019 ) > src/config.h.tmp
1020 ${srcdir}/move-if-change src/config.h.tmp src/config.h
1021 ### Remind people not to edit this.
1022 chmod -w src/config.h
1023
1024
1025 #### Modify the parameters in the top-level Makefile.
1026 echo "Producing \`Makefile' from \`${srcdir}/Makefile.in'."
1027 rm -f Makefile.tmp
1028 (echo "\
1029 # This file is generated by \`${progname}' from
1030 # \`${srcdir}/Makefile.in'.
1031 # If you are thinking about editing it, you should seriously consider
1032 # running \`${progname}' instead, or editing
1033 # \`${srcdir}/Makefile.in' itself."
1034  /bin/sed < ${srcdir}/Makefile.in                                       \
1035  -e 's|^configname *=.*$|configname='"${configuration}"'|'              \
1036  -e 's|^version *=.*$|version='"${version}"'|'                          \
1037  -e 's|^srcdir *=.*$|srcdir='"${srcdir}"'|'                             \
1038  -e 's|^CC *=.*$|CC='"${default_cc}"'|'                                 \
1039  -e 's|^CONFIG_CFLAGS *=.*$|CONFIG_CFLAGS='"${default_cflags}"'|'       \
1040  -e 's|^C_SWITCH_SYSTEM *=.*$|C_SWITCH_SYSTEM='"${c_switch_system}"'|'  \
1041  -e 's|^LOADLIBES *=.*$|LOADLIBES='"${libsrc_libs}"'|'                  \
1042  -e '/^# DIST: /d') > Makefile.tmp
1043 ${srcdir}/move-if-change Makefile.tmp Makefile
1044
1045 ### I'm commenting out this section until I bring the `build-install' script
1046 ### into line with the rest of the configuration stuff.
1047
1048 ### # Modify the parameters in the `build-install' script.
1049 ### echo "Producing \`./build-install' from \`${srcdir}/build-install.in'."
1050 ### rm -f ./build-install.tmp
1051 ### (echo "\
1052 ### # This file is generated by \`${progname}' from \`${srcdir}/build-install.in'.
1053 ### # If you are thinking about editing it, you should seriously consider
1054 ### # editing \`./build-install.in' itself, or running \`${progname}' instead."
1055 ###  /bin/sed < ${srcdir}/build-install.in                      \
1056 ###  -e 's;^\(prefix=\).*$;\1'"${prefix};"                      \
1057 ###  -e 's;^\(bindir=\).*$;\1'"${bindir};"                      \
1058 ###  -e 's;^\(lisppath=\).*$;\1'"${lisppath};"          \
1059 ###  -e 's;^\(datadir=\).*$;\1'"${datadir};"            \
1060 ###  -e 's;^\(lockdir=\).*$;\1'"${lockdir};"            \
1061 ###  -e 's;^\(libdir=\).*$;\1'"${libdir};") > ./build-install.tmp
1062 ### ${srcdir}/move-if-change build-install.tmp build-install
1063 ### # Remind people not to edit this.
1064 ### chmod -w build-install
1065 ### chmod +x build-install
1066
1067
1068 #### Describe the results.
1069
1070 ### Create a verbal description of what we have done.
1071
1072 message="Configured for \`${configuration}'.
1073
1074   What operating system and machine description files should Emacs use?
1075         \`${opsysfile}' and \`${machfile}'
1076   Should Emacs use the GNU version of malloc?             ${GNU_MALLOC}${GNU_MALLOC_reason}
1077   Should Emacs use the relocating allocator for buffers?  ${REL_ALLOC}
1078   What window system should Emacs use?                    ${window_system}
1079   What compiler should emacs be built with?               ${default_cc}
1080   Should the compilation use \`-g' and/or \`-O'?            ${default_cflags-neither}${x_includes+
1081   Where do we find X Windows header files?                }${x_includes}${x_libraries+
1082   Where do we find X Windows libraries?                   }${x_libraries}"
1083
1084 ### Write config.status, documenting the damage we have done.
1085
1086 (echo "\
1087 #!/bin/sh
1088 ### This file is generated by \`${progname}.'
1089 ### If you are thinking about editing it, you should seriously consider
1090 ### running \`${progname}' instead.
1091 "
1092  echo "${message}" | sed -e 's/^/# /'
1093  echo "exec '${progname}' ${arguments} "'$@') > config.status
1094
1095 ### Remind people not to edit this.
1096 chmod -w config.status
1097 chmod +x config.status
1098
1099 ### Print the description.
1100 echo
1101 echo "${message}"
1102
1103 exit 0