1 2001-09-05 Gerd Moellmann <gerd@gnu.org>
3 * configure.in: Avoid `$@' which is handled specially in
4 Autoconf 2.52. From "Adam J. Richter" <adam@yggdrasil.com>.
6 2001-09-01 Eli Zaretskii <eliz@is.elta.co.il>
8 * make-dist (nt): Add subdirs.el to the list of distributed files.
10 2001-08-14 Eli Zaretskii <eliz@is.elta.co.il>
12 * configure.in (machine): Add an entry for
13 hppa1.1-hitachi-hiuxwe2*.
15 2001-05-28 Gerd Moellmann <gerd@gnu.org>
17 * make-dist (LANG): Set LC_ALL and LANGUAGE to C, unset
18 LC_MESSAGES and LANG. From Karl Eichwalder <keichwa@gmx.net>.
20 2001-05-14 Gerd Moellmann <gerd@gnu.org>
22 * make-dist: Copy texinfo.tex unconditionally.
24 2001-04-25 Eli Zaretskii <eliz@is.elta.co.il>
26 * Makefile.in (install-arch-indep): Add gfdl.1 to the man pages
29 2001-04-06 Gerd Moellmann <gerd@gnu.org>
31 * make-dist: Copy only `[a-z]*.{el,elc}' from leim/quail.
32 Don't copy quick-b5, quick-cns, tsang-b5, and tsang-cns files.
34 * make-dist: Handle leim/MISC-DIC. Only include
35 `[a-zA-Z]*.{el,elc}' from leim/quail.
37 2001-04-05 Gerd Moellmann <gerd@gnu.org>
39 * Makefile.in (install-arch-indep): Remove .cvsignore files.
41 2001-03-30 Gerd Moellmann <gerd@gnu.org>
43 * Makefile.in (.PHONY): Add for bootstrap targets.
44 (bootstrap-clean): New target.
45 (bootstrap): Use it instead of `clean'.
47 2001-03-29 Eli Zaretskii <a34785@is.elta.co.il>
49 * Makefile.in (SUBDIR): Remove leim.
50 (all, .RECURSIVE, extraclean): Add leim explicitly.
51 (leim): Provide separate rule which exports PARALLEL=0 into the
54 2001-03-20 Gerd Moellmann <gerd@gnu.org>
56 * configure.in (HAVE_XPM): Don't print the result of the check for
57 XpmReturnAllocPixels if we don't have an xpm.h.
59 2001-03-05 Gerd Moellmann <gerd@gnu.org>
63 2001-03-04 Eli Zaretskii <eliz@is.elta.co.il>
65 * config.bat: Update the copyright.
67 2001-02-23 Kenichi Handa <handa@etl.go.jp>
69 * configure.in: Use AC_EGREP_CPP to check if the C preprocessor
70 converts `..' to `. .'. If it converts, set CPP_NEED_TRADITIONAL
71 to `yes'. Later in AC_OUTPUT, check this variable.
73 2001-02-09 Dave Love <fx@gnu.org>
77 2001-02-06 Eli Zaretskii <eliz@is.elta.co.il>
79 * info/dir (Ebrowse): Fix the entry (was missing a dot).
81 2001-02-02 Gerd Moellmann <gerd@gnu.org>
83 * mkinstalldirs (errstatus): Chmod a+rx directories we create.
85 * Makefile.in (uninstall): Ignore exit code of `rm'.
87 * Makefile.in (uninstall): Remove more info files. Remove
88 ${libexecdir}/emacs/${version}. Remove ${archlibdir}/fns-*.
90 2001-01-31 Gerd Moellmann <gerd@gnu.org>
92 * noleim-Makefile.in (extraclean): Add.
94 2001-01-28 Gerd Moellmann <gerd@gnu.org>
96 * Makefile.in (extraclean): Added -f to -rm config-tmp-* to keep
99 2001-01-24 Colin Walters <walters@cis.ohio-state.edu>
101 * Makefile.in (tags): Fix typo.
103 2001-01-13 Kenichi Handa <handa@etl.go.jp>
105 * configure.in: Fix typo in the code setting x_search_path.
107 2001-01-10 Dave Love <fx@gnu.org>
109 * configure.in: Don't reset LIBS at end of -lXmu test. Test for
111 (HAVE_XKBGETKEYBOARD): Fix reporting of result.
112 (HAVE_LIBXP): Remove -lXt from AC_CHECK_LIB.
113 (HAVE_XAW3D, HAVE_XPM, HAVE_JPEG, HAVE_PNG, HAVE_TIFF, HAVE_GIF):
114 Don't frob CFLAGS. Remove extra X libs from AC_CHECK_LIB
117 2001-01-08 Eli Zaretskii <eliz@is.elta.co.il>
119 * config.bat: Run the preprocessor with -traditional.
121 2001-01-01 Eli Zaretskii <eliz@is.elta.co.il>
123 * INSTALL: Move copying conditions to end of file.
125 2000-12-27 Eli Zaretskii <eliz@is.elta.co.il>
127 * INSTALL: Add basic installation procedure which assumes
128 `configure' does its job. Elaborate on image support libraries.
129 Add a pointer to Xaw3d library. Add advice about solving
130 configure-time problems by looking in config.log and setting
131 variables in the environment.
133 2000-12-27 Gerd Moellmann <gerd@gnu.org>
135 * Makefile.in (install-arch-indep): If tar fails, exit with
138 2000-12-19 Gerd Moellmann <gerd@gnu.org>
140 * configure.in: Test for XkbGetKeyboard with an AC_TRY_LINK whose
141 source file includes XKBlib.h. On some broken Solaris systems,
142 there is an XKBlib.h, reportedly, but header files included by
143 XKBlib.h are missing.
145 2000-12-14 Gerd Moellmann <gerd@gnu.org>
147 * configure.in: AC_CHECK_FUNC XkbGetKeyboard.
149 2000-12-11 Dave Love <fx@gnu.org>
151 * configure.in <alpha*-dec-osf*>: Use full path for NON_GNU_CPP.
153 2000-12-11 Paul Eggert <eggert@twinsun.com>
155 * aclocal.m4 (AC_SYS_LARGEFILE, AC_SYS_LARGEFILE_MACRO_VALUE):
156 Merge fixes from latest GNU tar version. These macros no longer
157 futz with _XOPEN_SOURCE, as that was not portable in practice.
158 (AC_FUNC_FSEEKO): New macro.
160 * configure.in: Use it instead of invoking AC_CHECK_FUNCS on
163 2000-12-05 Dave Love <fx@gnu.org>
165 * Makefile.in (TAGS, info): Avoid tab-prefixed comments in rules.
167 2000-12-02 Eli Zaretskii <eliz@is.elta.co.il>
169 * info/dir: Change the category to "Emacs".
171 2000-12-01 Gerd Moellmann <gerd@gnu.org>
173 * make-dist (tempdir): Remove epaths.h from the distribution
176 2000-11-23 Eli Zaretskii <eliz@is.elta.co.il>
178 * config.bat: Check for existence of djecho.exe, and print an
179 error message if it is not available.
181 * INSTALL: Describe possible problem with djecho.exe in old
182 versions of DJGPP v2.x.
184 2000-11-23 Gerd Moellmann <gerd@gnu.org>
186 * configure.in: Initialize HAVE_LIBXP to no.
188 2000-11-22 Gerd Moellmann <gerd@gnu.org>
190 * configure.in: Use m/macppc.h instead of the non-existent
193 2000-11-21 Gerd Moellmann <gerd@gnu.org>
195 * Makefile.in (install-arch-indep): Also install info/eshell*
198 * configure.in (HAVE_PNG): Check for the presence of
199 png_get_channels to rule out older PNG libs.
201 * configure.in (AC_OUTPUT): Arrange to emit definitions of
202 GCC and NON_GNU_CPP into config.status.
204 2000-11-20 Dave Love <fx@gnu.org>
206 * configure.in: Fix last change.
208 * GETTING.GNU.SOFTWARE: Deleted.
209 * FTP: New file to replace it.
210 * make-dist: Add FTP, remove GETTING.GNU.SOFTWARE.
212 2000-11-20 Gerd Moellmann <gerd@gnu.org>
214 * configure.in: Use -traditional with GNU cpp.
216 2000-11-17 Gerd Moellmann <gerd@gnu.org>
218 * make-dist: Handle the Mac port. Distribute all makefile.w32-in.
219 Distribute more files from the nt/ subdir. Distribute PBM
220 image files from subdirs of lisp/. Distribute old change logs
221 from subdirs of lisp/. Distribute play/5x5.el.
223 2000-11-11 Dave Love <fx@gnu.org>
225 * config.sub, config.guess: Updated from master source.
227 2000-11-07 Dave Love <fx@gnu.org>
229 * configure.in: Test for mkstemp.
231 2000-11-01 Eli Zaretskii <eliz@is.elta.co.il>
233 * info/dir (Top): Rearrange menu items more logically, and put
234 them into a single category. Add menu items for RefTeX and
237 2000-10-29 Kai Gro
\e,A_
\e(Bjohann <Kai.Grossjohann@CS.Uni-Dortmund.DE>
239 * Makefile.in (install-arch-indep): Use --info-dir instead of
240 --dir-file, and a simple argument instead of --info-file, so that
241 the Debian version of install-info also works.
243 2000-10-19 Eric M. Ludlam <zappo@ultranet.com>
245 * info/dir (Speedbar): Add entry.
247 2000-10-16 Eli Zaretskii <eliz@is.elta.co.il>
249 * INSTALL: Describe the new image-support options to the configure
250 script. List URLs where image support libraries can be found.
252 2000-10-14 Eli Zaretskii <eliz@is.elta.co.il>
254 * info/dir (Top): Add an entry for Eshell.
256 2000-10-02 Dave Love <fx@gnu.org>
258 * configure.in: Check for gai_strerror.
260 2000-10-01 Andreas Schwab <schwab@suse.de>
262 * Makefile.in (install-arch-indep): Update list of installed info
265 2000-09-30 Gerd Moellmann <gerd@gnu.org>
267 * configure.in: Support `sparc*-*-netbsd*'.
269 2000-09-29 Eli Zaretskii <eliz@is.elta.co.il>
271 * info/dir (MIME): Add entry for emacs-mime.
273 2000-09-29 Dave Love <fx@gnu.org>
275 * configure.in: Fix alpha*-dec-osf4 using the osf5 config.
277 2000-09-26 Gerd Moellmann <gerd@gnu.org>
279 * make-dist: Adapt to the change of leim/Makefile which was
280 necessary to ensure a reasonably working `make dist'.
282 * leim-Makefile.in: Moved to leim/Makefile.in..
284 * noleim-Makefile.in: New file, formerly leim/Makefile.in.
286 2000-09-21 Kenichi Handa <handa@etl.go.jp>
288 * leim-Makefile.in (TIT-GB, TIT-BIG5, NON-TIT-GB, NON-TIT-BIG5)
289 (NON-TIT-CNS, JAPANESE, KOREAN, THAI, VIETNAMESE, LAO, INDIAN)
290 (TIBETAN, LATIN, SLAVIC, GREEK, RUSSIAN, MISC): Rename all .el
292 (${TIT}): Adjusted for the above change.
293 (clean mostlyclean): Likewise.
294 (.el.elc): New target.
296 2000-09-19 Gerd Moellmann <gerd@gnu.org>
298 * make-dist: Include XPM and XBM files in lisp/ and subdirs
301 2000-09-18 Gerd Moellmann <gerd@gnu.org>
303 * make-dist (skk): Rename to `ja-dic' because the leim directory
306 2000-09-14 Dave Love <fx@gnu.org>
308 * configure.in: Fix spurion in last change.
310 2000-09-14 Gerd Moellmann <gerd@gnu.org>
312 * configure.in (USE_MMAP_FOR_BUFFERS): Recognize in system
313 configuration files instead of REL_ALLOC_MMAP. Set REL_ALLOC
314 to `no' if defined. Change result report.
316 2000-09-08 Dave Love <fx@gnu.org>
318 * configure.in: Remove spurious `@'s.
320 * aclocal.m4 (AC_FUNC_MMAP): Use fixed version from development
323 2000-09-06 Gerd Moellmann <gerd@gnu.org>
325 * configure.in (REL_ALLOC_MMAP): Recognize in system configuration
326 file and print informational message.
328 * configure.in (AC_FUNC_MMAP): Add.
330 2000-09-01 Gerd Moellmann <gerd@gnu.org>
332 * configure.in: Add ``checking'' messages for
333 XpmReturnAllocPixels.
335 2000-08-28 Gerd Moellmann <gerd@gnu.org>
337 * configure.in: Check <strings.h>; check `index' and `rindex'
340 2000-08-26 Kenichi Handa <handa@etl.go.jp>
342 * configure.in <alpha*-dec-osf*>: Move "NON_GNU_CPP='cpp'" before
343 "case "${canonical}" in".
345 2000-08-25 Dave Love <fx@gnu.org>
347 * configure.in <osf>: Use NON_GNU_CPP='cpp' always.
349 2000-08-25 Kenichi Handa <handa@etl.go.jp>
351 * leim-Makefile.in: Rename skk to ja-dic throughout the file.
353 2000-08-24 Gerd Moellmann <gerd@gnu.org>
355 * configure.in <making srcdir absolute>: Unset CDPATH in case $PWD
356 contains a relative path. Protect against unusable values of
359 2000-08-08 Eli Zaretskii <eliz@is.elta.co.il>
361 * info/dir (WoMan): Add entry.
363 * config.bat (maindir): Update src/_gdbinit even if it does
366 2000-08-07 Gerd Moellmann <gerd@gnu.org>
368 * Makefile.in (config.status): Prepend `$(srcdir)/' to
371 2000-08-03 Gerd Moellmann <gerd@gnu.org>
373 * configure.in: Add support for ia64*-*-linux*.
375 2000-07-27 Gerd Moellmann <gerd@gnu.org>
377 * make-dist (aclocal.m4): Include in distribution.
379 2000-07-26 Dave Love <fx@gnu.org>
381 * configure.in (AC_SYS_LARGEFILE): Moved earlier.
383 2000-07-24 Dave Love <fx@gnu.org>
385 * configure.in: Add AC_SIZE_T.
387 2000-07-18 Dave Love <fx@gnu.org>
389 * configure.in: Reorder so that most tests are done after CPPFLAGS
390 is set from the C_SWITCH_... definitions.
392 2000-07-10 Gerd Moellmann <gerd@gnu.org>
394 * configure.in (HAVE_XPM): Undo previous change. Check for
395 preprocessor define XpmReturnAllocPixels.
397 2000-07-06 Gerd Moellmann <gerd@gnu.org>
399 * configure.in (HAVE_XPM): Check for XpmReturnAllocPixels
400 instead of XpmReadFileToPixmap.
402 2000-07-05 Ken Raeburn <raeburn@gnu.org>
404 * configure.in: Check for <soundcard.h>. Look for ossaudio
405 library, and set LIBSOUND accordingly.
407 2000-07-05 Dave Love <fx@gnu.org>
409 * configure.in: Use AC_HEADER_SYS_WAIT.
411 2000-07-05 Gerd Moellmann <gerd@gnu.org>
413 * make-dist: Check DONTCOMPILE in lisp/Makefile.in instead of
414 lisp/Makefile. Distribute lisp/Makefile.in instead of
417 2000-06-30 Ken Raeburn <raeburn@gnu.org>
419 * configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS,
420 while searching for image-handling libraries.
422 2000-06-26 Gerd Moellmann <gerd@gnu.org>
424 * configure.in (--with-xim): New option.
426 2000-06-23 Dave Love <fx@gnu.org>
428 * configure.in [HAVE_TIMEVAL]: Move gettimeofday test here, test
429 for struct timezone and test how we can call gettimeofday.
430 Check for OSF 5+. Check for term.h.
432 * aclocal.m4: Define the post-2.13 stuff conditionally on autoconf
435 2000-06-23 Gerd Moellmann <gerd@gnu.org>
437 * configure.in (HAVE_LIBXP): Change test for libXp.
439 2000-06-21 Dave Love <fx@gnu.org>
441 * configure.in: Check for fcntl.h. Use AC_FUNC_GETLOADAVG, not
442 simple test for getloadavg and substitute GETLOADAVG_LIBS.
443 Simplify test for GETTIMEOFDAY_ONE_ARGUMENT.
445 2000-06-19 Dave Love <fx@gnu.org>
447 * configure.in (GETTIMEOFDAY_ONE_ARGUMENT): Fix in case
448 _XOPEN_SOURCE is defined.
450 2000-06-16 Gerd Moellmann <gerd@gnu.org>
452 * Makefile.in (distclean): Also make distclean in lisp/.
454 2000-06-15 Eli Zaretskii <eliz@is.elta.co.il>
456 * config.bat: Generate lisp/Makefile from lisp/Makefile.in.
458 2000-06-15 Gerd Moellmann <gerd@gnu.org>
460 * make-dist: Add --help and --snapshot options.
462 2000-06-14 Gerd Moellmann <gerd@gnu.org>
464 * configure.in: Generate lisp/Makefile.
466 * configure.in: Add support for `*-lynxos*'.
467 Use `cpp' as NON_GNU_CPP for `alpha*-dec-osf[5-9]*', as
468 recommended by <Karen.Dorhamer@compaq.com> to fix problems
471 2000-06-13 Ken Raeburn <raeburn@gnu.org>
473 * Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when
474 it's on a continuation line.
476 2000-06-02 Dave Love <fx@gnu.org>
478 * Makefile.in: (install-arch-indep): Add pcl-cvs to list of info
481 * configure.in: Don't specify -n32 flag for mips-sgi-irix6.5.
482 Check for struct exception. Use AC_SYS_LARGEFILE and move ftello
485 * aclocal.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES)
486 (AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New.
488 2000-05-26 Gerd Moellmann <gerd@gnu.org>
490 * configure.in: Add check for speed_t typedef.
492 2000-05-25 Ken Raeburn <raeburn@gnu.org>
494 * Makefile.in (install-arch-dep): Install fns-*.el only if it
495 exists; it won't in the CANNOT_DUMP case.
497 2000-05-25 Gerd Moellmann <gerd@gnu.org>
499 * Makefile.in: Ignore exit status of `unset CDPATH' everywhere.
500 On FreeBSD, the exit status is 1 if CDPATH is not set.
501 (install-arch-indep): Install ebrowse.info.
503 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
505 * configure.in: Check for grandpt and getpt.
507 2000-05-09 Dave Love <fx@gnu.org>
509 * Makefile.in (install-arch-indep): Filter CVS as well as RCS.
511 2000-05-05 Gerd Moellmann <gerd@gnu.org>
513 * make-dist: Make a link for lib-src/grep-changelog. Copy
516 2000-05-01 Eli Zaretskii <eliz@is.elta.co.il>
518 * config.bat: Identify the beginning of the cpp stuff in
519 src/Makefile.in and lib-src/Makefile.in more accurately.
521 2000-04-27 Gerd Moellmann <gerd@gnu.org>
523 * configure.in: Add support for `powerpc*-*-linux-gnu*'.
525 2000-04-19 Gerd Moellmann <gerd@gnu.org>
527 * configure.in: Add support for `powerpc-*-netbsd*'.
529 2000-04-19 Dave Love <fx@gnu.org>
531 * configure.in: Don't use AC_FUNC_GETLOADAVG.
533 * aclocal.m4 (AC_FUNC_MKTIME): Use AC_SUBST.
535 2000-04-16 Dave Love <fx@gnu.org>
537 * Makefile.in (${srcdir}/configure): Depend on aclocal.m4.
539 2000-04-14 Dave Love <fx@gnu.org>
541 * configure.in: Use AC_FUNC_GETLOADAVG, AC_FUNC_MKTIME.
543 * aclocal.m4 (AC_FUNC_MKTIME): New.
545 2000-03-28 Ken Raeburn <raeburn@gnu.org>
547 * configure.in: Line up "--help" output a little better.
549 2000-03-26 Gerd Moellmann <gerd@gnu.org>
551 * Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src):
553 (bootstrap): Rewritten in terms of the new targets above. Make
556 2000-03-12 Gerd Moellmann <gerd@gnu.org>
558 * config.guess, config.sub: Use the versions of the files from
561 2000-03-08 Dave Love <fx@gnu.org>
563 * configure.in: Use AC_PROG_RANLIB, AC_C_PROTOTYPES,
564 AC_C_VOLATILE. Define POINTER_TYPE.
566 * aclocal.m4: New file.
568 2000-03-02 Gerd Moellmann <gerd@gnu.org>
570 * configure.in (machine): Add `mipsel-*-netbsd*' and
573 2000-03-01 Gerd Moellmann <gerd@gnu.org>
575 * configure.in (machine): Add support for `*-auspex-sunos*'.
577 2000-02-29 Gerd Moellmann <gerd@gnu.org>
579 * configure.in (C_OPTIMIZE_SWITCH) [__GNUC__]: Use -O2.
581 2000-02-18 Dave Love <fx@gnu.org>
583 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
585 2000-02-18 Andreas Schwab <schwab@suse.de>
587 * Makefile.in (install-arch-indep): Add eudc to list of installed
590 2000-02-17 Ken Raeburn <raeburn@gnu.org>
592 * configure.in: Include -lz and -ljpeg (if it's available) when
593 testing for the tiff library.
595 2000-02-17 Gerd Moellmann <gerd@gnu.org>
597 * configure.in: Remove LISP_FLOAT_TYPE.
599 2000-02-12 Dave Love <fx@gnu.org>
601 * configure.in: Use AC_FUNC_VFORK.
603 2000-02-01 Gerd Moellmann <gerd@gnu.org>
605 * make-dist: Various fixes for new development tree.
607 * leim-Makefile.in: New file.
609 2000-01-31 Gerd Moellmann <gerd@gnu.org>
611 * Makefile.in (dist): Call ./make-dist.
613 2000-01-24 Dave Love <fx@gnu.org>
615 * configure.in: Remove -G0 from Irix NON_GCC_TEST_OPTIONS.
617 2000-01-18 Gerd Moellmann <gerd@gnu.org>
619 * configure.in (HAVE_GIF): Check for DGifOpen instead of
622 2000-01-11 Andreas Schwab <schwab@suse.de>
624 * Makefile.in (install-arch-indep): Update list of info files to
627 2000-01-05 Dave Love <fx@gnu.org>
629 * configure.in: Check for jerror.h as well as libjpeg.
631 2000-01-03 Andreas Schwab <schwab@suse.de>
633 * Makefile.in (install-arch-indep): Install autotype*. Run
634 install-info on autotype and emacs-faq.info.
636 1999-12-04 Dave Love <fx@gnu.org>
638 * Makefile.in: (install-arch-indep): Depend on `info'.
639 (install-strip): Use `install' as sub-make target.
641 1999-11-23 Ken Raeburn <raeburn@gnu.org>
643 * configure.in: Restore Kerberos code deleted on 1999-05-29 that
644 didn't need to be deleted. Check for the k5crypto library as well
645 as the crypto library; MIT Kerberos 1.1 changed the name.
647 1999-11-18 Dave Love <fx@gnu.org>
649 * configure.in: Fix NON_GNU_CPP for Irix 6 to avoid failing tests.
651 1999-11-11 Erik Naggum <erik@naggum.no>
653 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
655 1999-11-08 Dave Love <fx@gnu.org>
657 * configure.in: Fix change for --with-pop default.
659 1999-11-04 Dave Love <fx@gnu.org>
661 * configure.in: Default to --with-pop. Change sense of with-gcc
662 and with-toolkit-scroll-bars messages to reflect the defaults.
664 1999-11-01 Gerd Moellmann <gerd@gnu.org>
666 * INSTALL: Mention the Emacs Lisp Reference.
668 1999-10-27 Noah Friedman <friedman@splode.com>
670 * configure.in: Check for dynamic ptys (/dev/ptmx, /dev/pts/).
672 1999-10-23 Gerd Moellmann <gerd@gnu.org>
674 * Makefile.in (bootstrap): New target.
676 1999-10-19 Paul Eggert <eggert@twinsun.com>
678 Add support for large files. Merge glibc 2.1.2.
680 * configure.in (AC_CHECK_HEADERS): Add stdio_ext.h.
681 (HAVE_TM_GMTOFF): New symbol.
682 (AC_CHECK_FUNCS): Add __fpending, ftello, getloadavg, mblen,
684 (LOCALTIME_CACHE): Don't include stdlib.h, as config.h does this now.
686 1999-10-09 Stefan Monnier <monnier@cs.yale.edu>
688 * make-dist (dontcompile): look for the DONTCOMPILE variable rather
689 than the obsolete dontcompilefiles pseudo-rule in lisp/Makefile.
691 1999-10-09 Richard M. Stallman <rms@gnu.org>
693 * Makefile.in (uninstall, install-arch-indep, install-arch-dep):
694 Unset CDPATH to prevent cd from generating output.
696 1999-10-08 Stefan Monnier <monnier@cs.yale.edu>
698 * update-subdirs: also ignore CVS subdirs.
700 1999-10-07 Gerd Moellmann <gerd@gnu.org>
702 * Makefile.in (install-arch-indep): Add ada-mode.
704 1999-10-06 Dave Love <fx@gnu.org>
706 * Makefile.in: Add rules for config.status, configure.
708 1999-09-07 Gerd Moellmann <gerd@gnu.org>
710 * configure.in (--with-sound): Removed.
712 1999-08-30 Gerd Moellmann <gerd@gnu.org>
714 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after
716 (HAVE_TIFF): Add -lm to library check.
718 1999-08-28 Richard Stallman <rms@gnu.org>
720 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for
721 -lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down
722 after the other X-related libraries.
724 1999-08-21 Dave Love <fx@gnu.org>
726 * configure.in: Don't check for jpeglib.h.
728 1999-08-20 Gerd Moellmann <gerd@gnu.org>
730 * configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h.
731 (HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none.
733 1999-08-18 Dave Love <fx@gnu.org>
735 * configure.in: : Check for termcap.h.
737 1999-08-15 Gerd Moellmann <gerd@gnu.org>
739 * configure.in: Add --with-toolkit-scroll-bars. If "no",
740 use Emacs' scroll bars, even if configured for Motif or when
743 1999-08-12 Wolfgang Rupprecht <wolfgang@wsrcc.com>
745 * configure.in: Check for getaddrinfo.
747 1999-08-04 Eli Zaretskii <eliz@gnu.org>
749 * config.bat: Make --no-debug work again by removing -gcoff.
751 1999-07-30 Dave Love <fx@gnu.org>
753 * configure.in: Check for stdlib.h.
755 1999-07-19 Dave Love <fx@gnu.org>
757 * configure.in: Grok sparc64-*-linux-gnu*.
759 1999-07-12 Richard Stallman <rms@gnu.org>
761 * Version 20.4 released.
763 1999-06-23 Karl Heuer <kwzh@gnu.org>
765 * make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state.
766 Quote $EMACS, in case it's a program with args.
768 1999-05-29 Richard M. Stallman <rms@gnu.org>
770 * configure.in: Delete the Kerberos stuff.
772 1999-05-27 Greg Hudson <ghudson@mit.edu>
774 * configure.in: Prefer kerberos 5 names.
776 1999-04-26 Richard M. Stallman <rms@gnu.org>
778 * configure.in: Check for libXp.
780 1999-04-08 Richard Stallman <rms@gnu.org>
782 * make-dist: Include change logs in subdirs of `lisp'.
784 1999-04-05 Richard Stallman <rms@gnu.org>
786 * Makefile.in (mkdir): If we create ${datadir}, make it world-readable.
787 (install-arch-indep): Make ${datadir}/emacs world-readable.
789 1999-03-30 Eli Zaretskii <eliz@gnu.org>
791 * config.bat: Use epaths.* instead of paths.*.
793 1999-03-07 Eli Zaretskii <eliz@gnu.org>
795 * INSTALL: Add detailed instructions to unpack and install
798 1999-02-26 Richard Stallman <rms@gnu.org>
800 * configure.in: Use epaths.h and epaths-force instead of paths....
802 * Makefile.in (epaths-force): Renamed from paths-force;
803 operate on epaths.in and produce epaths.h.
805 1999-02-24 Richard Stallman <rms@gnu.org>
807 * make-dist: Fix nt/icons directory handling.
809 1999-02-22 Simon Josefsson <jas@pdc.kth.se>
811 * configure.in (f301-fujitsu-uxpv4.1): New target.
813 1999-02-20 Richard Stallman <rms@gnu.org>
815 * make-dist (tempparent): Fix command to update info files.
817 1999-02-09 Richard Stallman <rms@gnu.org>
819 * configure.in (powerpc-apple-netbsd*): New alternative.
821 1999-01-25 Geoff Voelker <voelker@cs.washington.edu>
823 * make-dist: Include the new directory nt/icons in distributions.
825 1999-01-19 Richard Stallman <rms@psilocin.ai.mit.edu>
827 * configure.in: Change message about HAVE_XFREE386.
829 1999-01-07 Eli Zaretskii <eliz@gnu.org>
831 * config.bat: Support configuring with leim.
833 1998-12-16 Petri Kaurinkoski <Petri.Kaurinkoski@hut.fi>
835 * configure.in (mips-sgi-irix6.5): New target.
837 1998-12-16 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
839 * configure.in: Remove GSS-API support, since it has been removed
842 1998-12-04 Markus Rost <rost@delysid.gnu.org>
844 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
846 1998-12-04 Andreas Schwab <schwab@delysid.gnu.org>
848 * Makefile.in: Don't install customize info file. Run
849 install-info on viper info file.
851 1998-11-29 Richard Stallman <rms@psilocin.ai.mit.edu>
853 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
855 1998-11-16 Kenichi Handa <handa@etl.go.jp>
857 * configure.in (*-*-bsdi4*): New target.
859 1998-11-13 Ehud Karni <ehud@unix.simonwiesel.co.il>
861 * configure.in: Fix previous change.
863 1998-11-11 Richard Stallman <rms@gnu.org>
865 * configure.in (aviion-intel): New machine.
867 1998-11-04 Kenichi Handa <handa@etl.go.jp>
869 * configure.in (mips-nec-sysv4*): New target.
871 1998-11-03 Andreas Schwab <schwab@delysid.gnu.org>
873 * Makefile.in (install-arch-dep): Fix last change and use fns-*.el
876 1998-10-31 Richard Stallman <rms@psilocin.ai.mit.edu>
878 * make-dist: Don't include fns*.el in dist.
880 1998-10-30 Dave Love <fx@gnu.org>
882 * configure.in: Don't mkdir cpp.
884 1998-10-30 Andreas Schwab <schwab@delysid.gnu.org>
886 * Makefile.in (install-arch-dep): Install src/fns-*.el in
889 1998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu>
891 * Version 20.3 released.
893 1998-07-30 Paul Eggert <eggert@twinsun.com>
895 * Makefile.in (Makefile, src/Makefile, src/config.stamp)
896 (lib-src/Makefile, man/Makefile, oldXMenu/Makefile)
897 (lwlib/Makefile, leim/Makefile):
898 Prepend $(srcdir)/ to rule dependencies outside this dir.
900 1998-06-30 Richard Stallman <rms@psilocin.ai.mit.edu>
902 * configure.in: Use unset CDPATH instead of making it empty.
904 1998-06-20 Karl Heuer <kwzh@gnu.org>
906 * configure.in: Assume unspecified Solaris is 2.5, not 2.4.
908 1998-06-07 Richard Stallman <rms@psilocin.ai.mit.edu>
910 * make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el
911 and default.el. Sort the results.
913 1998-05-31 Karl Heuer <kwzh@gnu.org>
915 * Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't
918 1998-05-14 Richard Stallman <rms@psilocin.ai.mit.edu>
920 * Makefile.in (install-arch-indep):
921 Don't alter site-lisp/subdirs.el if it exists.
923 1998-05-12 Richard Stallman <rms@psilocin.ai.mit.edu>
925 * Makefile.in (install-arch-indep): Put `-' on commands to create
926 subdirs.el in site-lisp dirs.
928 1998-05-07 Richard Stallman <rms@psilocin.gnu.org>
930 * Makefile.in (install-arch-indep): Fix typo in previous change.
932 1998-05-06 Richard Stallman <rms@psilocin.gnu.org>
934 * Makefile.in (install-arch-indep): Pass --dir-file to install-info.
936 1998-04-28 Richard Stallman <rms@psilocin.gnu.org>
938 * Makefile.in (mkdir): Create the site-lisp dirs.
939 (install-arch-indep): Make site-lisp/subdirs files world-readable.
941 1998-04-26 Richard Stallman <rms@psilocin.gnu.org>
943 * Makefile.in (INSTALL_INFO): New variable.
944 (install-arch-indep): Don't replace the dir file if it already exists.
945 Use the install-info program, via INSTALL_INFO, to add entries.
946 Make the `info' subdir and the Info files world-readable.
948 1998-04-16 Eli Zaretskii <eliz@delysid.gnu.org>
950 * config.bat: Make sure the environment is large enough to support
951 all the "set foo=bar" commands. Update pointers to DJGPP FTP
954 1998-04-10 Karl Heuer <kwzh@gnu.org>
956 * make-dist: Don't accept EMACS=t when testing for $EMACS set.
958 1998-04-06 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
960 * configure.in: Add --with-gssapi to specify GSS-API
961 authentication support for movemail.
963 1998-04-02 Richard Stallman <rms@psilocin.ai.mit.edu>
965 * Makefile.in (install-arch-indep): Fix previous change.
967 1998-03-30 Richard Stallman <rms@psilocin.ai.mit.edu>
969 * Makefile.in (info): Run man in build dir, not srcdir.
971 1998-03-28 Richard Stallman <rms@psilocin.ai.mit.edu>
973 * Makefile.in (install-arch-indep): Fix previous change.
975 1998-03-23 Kenichi Handa <handa@etl.go.jp>
977 * Makefile.in (top_distclean): Check the existence of `lock'
980 1998-03-22 Richard Stallman <rms@gnu.org>
982 * Makefile.in (install-arch-indep): Put special subdirs.el files
983 in site-lisp dirs. Use normal-top-level-add-subdirs-to-load-path.
985 1998-03-21 Richard Stallman <rms@psilocin.gnu.org>
987 * make-dist: Fix shell syntax in check for missing .el or .elc files.
989 1998-03-09 Richard Stallman <rms@psilocin.gnu.org>
991 * configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10.
992 (m68*-hp-hpux*): Handle versions 1X like 10.
994 1998-03-07 Richard Stallman <rms@psilocin.gnu.org>
996 * make-dist: PROBLEMS is now in etc, not top level dir.
998 * Makefile.in (SOURCES): Delete PROBLEMS.
1000 1998-02-25 Richard Stallman <rms@gnu.org>
1002 * configure.in (hppa*-hp-hpux*): Use hpux10 by default.
1004 * Makefile.in (install-arch-indep): Do chmod a+x on subdirs.
1006 1998-01-17 Richard Stallman <rms@gnu.org>
1008 * Makefile.in (install-arch-indep): Add semicolon before `else'.
1010 1998-01-02 Richard Stallman <rms@psilocin.gnu.org>
1012 * make-dist (tempparent): New option --no-check.
1014 * make-dist: Don't do anything with cpp directory.
1016 1997-12-20 Richard Stallman <rms@psilocin.gnu.org>
1018 * configure.in (sparc-fujitsu-sysv4*): New target.
1020 1997-12-17 Andreas Schwab <schwab@gnu.org>
1022 * configure.in: Cache more tests. Add missing quotes around
1023 message with embedded comma.
1025 1997-12-04 Karl Heuer <kwzh@gnu.org>
1027 * Makefile.in (unlock, relock): Don't reference cpp/ directory.
1029 1997-11-26 Joel N. Weber II <devnull@gnu.org>
1031 * make-dist: Changed the comment about `umask 0' to say `Don't
1032 restrict access to any files.'; previously it said `Don't protect
1033 any files', which may have implied that we think fascism is good.
1035 1997-11-24 Paul Eggert <eggert@twinsun.com>
1037 * configure.in (AC_CHECK_FUNCS): Add strftime. The new GNU C library
1038 strftime needs the underlying host's strftime for locale dependent
1041 1997-11-20 Abraham Nahum <miko@uxsrvc.tti.co.il>
1043 * configure.in (i586-dg-dguxR4.*): New name in case branch.
1045 1997-11-20 Eli Zaretskii <eliz@is.elta.co.il>
1047 * config.bat: Configure the man subdirectory.
1049 1997-11-07 Paul Eggert <eggert@twinsun.com>
1051 * configure.in (AC_CHECK_LIB): Add -lintl.
1053 1997-11-07 Karl Heuer <kwzh@gnu.org>
1055 * make-dist (check for .elc files): Avoid bash-specific syntax.
1056 (check for overflow 14-char limit): Simplify.
1058 1997-11-07 Richard Stallman <rms@gnu.org>
1060 * Makefile.in (install): Move blessmail last.
1062 1997-10-02 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1064 * configure.in (gettimeofday, one arg or two):
1065 Clarify messages by avoiding double negative.
1067 1997-09-30 Karl Eichwalder <ke@suse.de>
1069 * Makefile.in (install-arch-indep): install the widget info file.
1071 1997-09-24 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1073 * configure.in (with-pop, with-kerberos): Need to check Kerberos
1074 libraries in reverse order, so that libraries will appear in the
1075 correct dependency order on the link line (and so that the
1076 configure checks themselves will work properly when early
1077 libraries depend on later ones).
1079 1997-09-21 Erik Naggum <erik@naggum.no>
1081 * make-dist (making links to `src'): Keep timestamp on copied
1084 * make-delta: New script to produce delta distributions.
1086 1997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1088 * Version 20.2 released.
1090 1997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1092 * Version 20.1 released.
1094 * Makefile.in (install-leim): Depend on mkdir.
1095 (leim): Depend on src.
1097 1997-09-13 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1099 * configure.in: Recognize alpha* instead of just alpha.
1101 1997-09-12 Paul Eggert <eggert@twinsun.com>
1103 * leim-Makefile.in (mostlyclean, maintainer-clean): New targets.
1105 1997-09-12 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1107 * update-subdirs: Use rm -f.
1109 1997-09-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1111 * update-subdirs: Delete subdirs.el if this dir has no subdirs.
1112 Ignore subdirs named Old.
1114 1997-08-04 Kenneth Stailey <kstailey@elbereth.disclosure.com>
1116 * configure.in: Add OpenBSD clause to set $machine.
1118 1997-09-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1120 * make-dist: Recompile everything after updating various Lisp files.
1121 Recompile in leim as well as lisp.
1122 Check in leim as well as lisp for mismatched files and too-long names.
1124 1997-09-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1126 * Makefile.in (TAGS tags): Simply refer this to the src subdir.
1128 1997-08-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1130 * Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it
1131 before trying to copy anything from it.
1133 1997-08-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1135 * Makefile.in (man/Makefile): New target.
1136 (tags): Define env var EMACS and run Makefile from build dir.
1138 1997-08-27 Eli Zaretskii <eliz@psilocin.gnu.ai.mit.edu>
1140 * config.bat: If src/_gdbinit doesn't exist, try using
1141 src/.gdbinit to create it (for building on Windows 95).
1143 1997-08-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1145 * Makefile.in (install-arch-indep):
1146 Discard extra data in tar | tar pipes.
1148 1997-08-24 NIIBE Yutaka <gniibe@mri.co.jp>
1150 * configure.in (x_default_search_path): Corrected
1151 '${x_library}' to '${x_library}/X11'.
1153 1997-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1155 * configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1,
1157 1997-08-22 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1159 * configure.in: Support auto-configuration of both Kerberos V4 and
1160 Kerberos V5 for movemail, including detection of V4 and V5 header
1161 files and libraries.
1163 1997-08-16 NIIBE Yutaka <gniibe@etl.go.jp>
1165 * configure.in: Compute x_default_search_path
1166 and substitute into makefiles.
1168 * Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h.
1170 1997-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1172 * Makefile.in (install-arch-indep): Run list-load-path-shadows.
1174 1997-08-07 Erik Naggum <erik@naggum.no>
1176 * configure.in: Remove lockdir, it is no longer needed.
1177 * Makefile.in (mkdir): Don't create lockdir.
1178 (lockdir): Variable deleted.
1179 (paths-force): Don't operate on PATH_LOCK.
1181 1997-08-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1183 * leim-Makefile.in (clean, distclean): New targets.
1185 * make-dist: Include leim/ChangeLog in leim distribution.
1187 1997-08-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1189 * configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP.
1191 1997-07-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1193 * Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS.
1195 1997-07-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1197 * Makefile.in (LDFLAGS): Get this from configure, like CFLAGS.
1199 1997-07-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1201 * make-dist: Update leim/leim-list.el.
1202 Pass along value of $EMACS when updating lisp dir.
1204 1997-07-25 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1206 * configure.in (doug_lea_malloc): Make __after_morecore_hook a
1207 prerequisite to the use of Doug Lea's malloc.
1209 1997-07-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1211 * Makefile.in (top_distclean): Use -f to delete contents of lock dir.
1213 * make-dist: Use name leim/SKK-DIC, not leim/SKK.
1215 1997-07-16 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1217 * make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim.
1219 1997-07-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1221 * configure.in (mips-sony-newsos6*): File news-risc.h renamed
1224 1997-07-10 Eli Zaretskii <eliz@is.elta.co.il>
1226 * config.bat: Use `sed' instead of `cp', which might not be
1229 1997-07-09 Kenichi Handa <handa@etl.go.jp>
1231 * Makefile.in (mostlyclean): Add cleaning leim directory.
1232 (clean, distclean, maintainer-clean): Likewise.
1234 1997-07-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1236 * make-dist (bogosities): Check subdirs of `lisp' also.
1238 1997-07-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1240 * make-dist (etc): Really avoid symlinks now.
1241 (lisp): Don't delete from subdirs the things we never copy.
1243 1997-07-07 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1245 * Makefile.in (install-arch-indep): Correct the target name.
1246 The first letter `i' was dropped by the previous change of mine.
1248 1997-07-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1250 * configure.in (leim/Makefile): Generate this.
1251 (*-sysv4.2uw*): Recognize new alternative.
1253 * leim-Makefile.in: Renamed from leim-Makefile.
1255 * make-dist: Set up real-leim subdirectory,
1256 with the real contents of leim; then move it to
1257 a separate top-level directory.
1259 * make-dist: Don't mention site-lisp, site-init, site-start
1260 or default, when listing files hat are not compiled and should be.
1262 * configure.in: Create src/config.stamp at the end.
1264 1997-07-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1266 * Makefile.in (install-leim): Correct previous change.
1268 1997-07-02 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1270 * Makefile.in (install-leim): New target.
1271 (install): Depend on install-leim.
1273 1997-07-01 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1275 * Makefile.in (SUBDIR): Add leim.
1276 (SUBDIR_MAKEFILES): Add leim/Makefile.
1277 (leim/Makefile): New target.
1279 1997-07-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1281 * leim-Makefile: New file.
1282 * make-dist: Initialize a `leim' subdirectory with that makefile.
1284 1997-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1286 * configure.in (GNU_MALLOC_reason): Fix message text.
1288 1997-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1290 * make-dist (lisp): Don't process subdirs that start with =.
1291 (etc): Copy symlinks, as in src.
1293 1997-06-26 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1295 * configure.in (i*86-*-unixware*): New alternative.
1297 1997-06-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1299 * Makefile.in (src/config.stamp): Target renamed from src/config.h
1300 and touch it explicitly.
1302 * configure.in (mips-sony-newsos6*): New alternative.
1303 (mips-*-linux-gnu*): New alternative.
1304 (*-*-bsdi*): New alternative.
1305 (i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives.
1307 1997-06-22 Dave Love <d.love@dl.ac.uk>
1309 * Makefile.in (lib-src): Depend on src/config.h (e.g. for
1311 (src/config.h): New target to re-configure if src/config.in
1314 1997-06-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1316 * configure.in (shutdown): Check for `shutdown' function.
1318 1997-06-18 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1320 * update-subdirs: Include the directory "language" in subdirs.
1322 1997-06-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1324 * configure.in (m88k-dg-dgux4*): New alternative.
1325 (alpha-*-netbsd*): New alternative.
1326 (powerpcle-*-solaris2*): New alternative.
1328 1997-05-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1330 * make-dist: Warn about .el files that are not compiled.
1332 1997-05-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1334 * Makefile.in (dist): Don't run update-subdirs here,
1335 since make-dist now gets that done.
1337 * make-dist: Use the new `updates' target in lisp/Makefile.
1339 * make-dist: Use new non-file targets in lisp/Makefile.
1341 1997-04-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1343 * make-dist: Handle all subdirs of `lisp' uniformly.
1344 Don't handle `term' and `language' specially.
1345 Clear out umask at the beginning.
1347 1997-04-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1349 * make-dist: Use Make to update finder-inf.el and autoloads.
1350 Also update cus-load.el.
1352 1997-04-09 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1354 * configure.in (doug_lea_malloc): First check for SYSTEM_MALLOC,
1355 in case it is desirable to disable the GNU malloc features with
1358 1997-04-08 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1360 * configure.in (DOUG_LEA_MALLOC):
1361 Define if malloc_{get,set}_state exist.
1363 1997-03-05 Ken'ichi Handa <handa@etl.go.jp>
1365 * make-dist: Make links for files under lisp/language.
1367 1997-02-20 Kenichi Handa <handa@etl.go.jp>
1369 * update-subdirs: Exclude the directory "language" from subdirs.
1371 1997-01-26 Karl Heuer <kwzh@gnu.ai.mit.edu>
1373 * configure.in: Check for rint and cbrt.
1375 1997-01-01 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1377 * make-dist: Use $EMACS to say where to run Emacs.
1378 Add --no-update option.
1380 1996-12-30 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1382 * configure.in (hppa1.1-hitachi-hiuxmpp): New configuration.
1384 1996-12-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1386 * make-dist (copying src): Check thoroughly for symlinks
1387 and copy them in all cases. Regularize the linking of *.in
1388 and *.opt and ChangeLog files.
1389 (copying lib-src): Likewise.
1390 Don't rm getdate.c or y.tab.*--they don't exist any more.
1392 1996-12-18 Jonathan I. Kamens <jik@annex-1-slip-jik.cam.ov.com>
1394 * configure.in: Check for libmail, maillock.h and
1395 touchlock (for movemail).
1397 1996-12-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1399 * configure.in (limits.h): Check for this file.
1401 1996-12-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1403 * configure.in (rs6000-ibm-aix4.2): New alternative.
1404 (rs6000-ibm-aix4.0): New alternative.
1405 (rs6000-ibm-aix4*): Assume aix 4.1 by default.
1407 1996-11-22 Ben Harris <bjh21@cam.ac.uk>
1409 * configure.in: Recognize vax-*-netbsd*.
1411 1996-11-06 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1413 * configure.in (locallisppath): Add leim directory.
1415 1996-10-31 Eli Zaretskii <eliz@is.elta.co.il>
1417 * config.bat: Make sure `mv' supports forward slashes and -f.
1419 1996-10-28 Christian Limpach <chris@nice.ch>
1421 * configure.in (hppa*-next-nextstep*): * added after hppa
1422 to accept hppa1.0 and hppa1.1.
1424 1996-10-05 Marcus G. Daniels <marcus@coulee.tdb.com>
1426 * configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX.
1427 * configure.in (ld_switch_machine): Fix typo.
1429 1996-09-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1431 * configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE
1432 from config.h and use them in $ac_link.
1434 1996-09-28 Erik Naggum <erik@psilocin.gnu.ai.mit.edu>
1436 * configure.in: Create a subdir named `lisp'.
1438 1996-09-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1440 * configure.in: Check for getcwd.
1442 1996-09-04 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1444 * configure.in: Check for termios.h. Check for setpgid.
1446 1996-08-31 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1448 * configure.in: Check for setrlimit.
1450 1996-08-31 Paul Eggert <eggert@twinsun.com>
1452 * configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo.
1454 1996-08-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1456 * configure.in: Check for utimes.
1458 * configure.in: Check for com_err library, but only
1459 if --with-kerberos was used. Check for krb and des
1460 only if --with-kerberos.
1462 1996-08-26 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1464 * Makefile.in (INSTALL_STRIP): New variable.
1465 (install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM.
1466 (install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src.
1468 1996-08-25 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1470 * configure.in: Check for krb and des libraries.
1472 1996-08-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1474 * configure.in (*-sunos4.1.[3-9]*noshare):
1475 Use sunos413, not sunos4-1-3.
1476 (m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3.
1477 (arm-acorn-riscix1.2*): Use riscix12, not riscix1-2.
1479 1996-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1481 * Makefile.in (src/paths.h): Target deleted.
1482 (paths-force): Delete all dependencies on this target
1483 but don't delete the target.
1484 (install): Depend on `all'.
1485 (paths-force): Don't print a message.
1487 * configure.in: Generate src/paths.h here.
1489 1996-08-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1491 * configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS):
1492 New variables that affect linking only.
1493 (alpha-dec-osf*): Use those instead of previous change.
1495 1996-08-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1497 * Makefile.in (install-arch-indep): Install info/messages.
1499 1996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1501 * Version 19.33 released.
1503 1996-08-10 Marcus Daniels <marcus@sayre.sysc.pdx.edu>
1505 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1506 Fix previous change.
1508 1996-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1510 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1513 1996-08-07 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1515 * configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS
1516 and NON_GCC_TEST_OPTIONS.
1518 1996-08-06 Paul Eggert <eggert@twinsun.com>
1520 * configure.in (LOCALTIME_CACHE): Don't put a string literal
1521 "TZ=..." in environ.
1523 1996-08-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1525 * make-dist (msdos): Add is_exec.c, sigaction.c to distribution.
1527 1996-08-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1529 * configure.in (*-sunos4.1.[3-9]*noshare): Move this before
1530 the more general *-sunos4.1.[3-9]* clause.
1532 1996-07-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1534 * Version 19.32 released.
1536 * configure.in (*-sco3.2v5*):
1537 Set OVERRIDE_CPPFLAG to a string of one space.
1538 Fix the code that uses OVERRIDE_CPPFLAG.
1540 1996-07-16 Karl Heuer <kwzh@gnu.ai.mit.edu>
1542 * configure.in: Undo previous change.
1544 1996-07-16 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1546 * config.sub: Use `pc', not `unknown', when canonicalizing
1547 the vendor for ...86.
1549 1996-07-15 David Mosberger-Tang <davidm@AZStarNet.com>
1551 * configure.in: Check for termios.h header.
1553 1996-07-11 Bill Mann <dvmann@dvncr.praxisint.com>
1555 * configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3
1557 1996-07-07 Karl Heuer <kwzh@gnu.ai.mit.edu>
1559 * configure.in: Split bsdos2 and bsdos2-1.
1561 1996-07-06 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1563 * config.sub: If last two words are not a recognized
1564 KERNEL-OS pair, use just the last word as OS, as in 19.31.
1565 Make conversion of gnu/linux to linux-gnu really work.
1567 * config.sub: If vendor unspecified with i386, use `pc' not `unknown'.
1569 1996-06-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1571 * configure.in (check for using Lucid widgets by default):
1572 Eliminate indentation that confuses some compilers.
1574 1996-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1576 * config.sub: Convert linux and gnu/linux to linux-gnu.
1578 * make-dist: Don't update getdate.c.
1579 Ignore =... files when checking for too-long Lisp file names.
1581 1996-06-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1583 * configure.in (euidaccess): Check for that, not for eaccess.
1585 1996-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1587 * configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from
1589 (mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS.
1591 1996-06-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1593 * configure.in: Rename lignux to linux-gnu in configuration names.
1594 Use gnu-linux as the opsys value (s/ file name).
1595 Allow i686 just like i386, i486, i586.
1597 1996-06-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1599 * configure.in (i*86-*-sco3.2v5): New alternative.
1600 (OVERRIDE_CPPFLAG): New variable.
1601 (CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that.
1603 * configure.in: Specify vpath for .texi files.
1605 1996-06-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1607 * configure.in: Always check for HAVE_X11R5.
1608 Separately decide whether to use a toolkit by default.
1610 1996-06-04 Bill Mann <dvmann@dvhpux1.praxisint.com>
1612 * configure.in: If X11R5 is missing the Xaw headers,
1613 default to --with-x-toolkit=no.
1615 1996-05-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1617 * configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000.
1619 1996-05-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1621 * Makefile.in (install-arch-indep): If cd etc makes output,
1622 don't treat that as part of the tar data.
1623 Check that ./lisp actually exists.
1625 1996-05-29 Karl Heuer <kwzh@gnu.ai.mit.edu>
1627 * make-dist: Check for long file names.
1629 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1631 * Version 19.31 released.
1633 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1635 * configure.in: Recognize sparc-*-lignux.
1637 1996-05-03 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1639 * make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist.
1640 Don't include config.w95.
1642 1996-04-21 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1644 * make-dist: Replace --no-clean-up and --no-tar options
1645 with --clean-up and --tar, so that the default is useful.
1647 1996-04-15 Eli Zaretskii <eliz@is.elta.co.il>
1649 * config.bat: Make sure the GDB init file is called src/_gdbinit;
1650 if not, tell the user to rename it and abort.
1652 1996-04-14 Eli Zaretskii <eliz@is.elta.co.il>
1654 * config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE
1657 1996-04-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1659 * config.bat (djgpp_ver): Variable renamed from djgpp-ver.
1661 * make-dist (MANIFEST): Fix previous change.
1662 (msdos): Put mainmake.v2 into the dist.
1664 1996-04-10 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1666 * make-dist: Exit if autoconf fails.
1668 1996-04-10 Eli Zaretskii <eliz@is.elta.co.il>
1670 * config.bat: Set djgpp-ver, and unset it at the end.
1671 Add a number of conditionals for DJGPP version 2.
1672 Rename label libsrc2 to libsrc3.
1673 Substitute for LDFLAGS in src/Makefile.
1674 Substitute for ALL_CFLAGS in lib-src/Makefile.
1676 1996-04-08 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1678 * configure.in (ncurses): Check this after checking fns like strerror.
1680 1996-04-08 Erik Naggum <erik@naggum.no>
1682 * make-dist (MANIFEST): Don't include lines from =files.
1684 1996-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1686 * make-dist: Don't put lisp/dired.todo in the dist.
1688 1996-04-05 Richard Stallman <rms@lucy.gnu.ai.mit.edu>
1690 * configure.in (HAVE_NCURSES): Look for library named ncurses.
1692 * configure.in (setlocale): Check for it.
1694 * configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp.
1696 1996-03-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1698 * configure.in: Use lignux instead of linux as value of opsys.
1700 1996-03-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1702 * Makefile.in (install-strip): Fix whitespace.
1703 Get rid of continuation.
1705 * config.sub: Convert linux or gnu/linux to lignux.
1707 1996-03-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1709 * configure.in: Accept lignux in configuration name.
1711 1996-03-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1713 * Makefile.in (install-strip): New target.
1715 1996-03-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1717 * Makefile.in (top_distclean): Use `|| true' to ignore error in rm.
1718 -f failed to do the job on Suns.
1720 1996-03-13 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1722 * Makefile.in (install-arch-dep): Don't depend on install-arch-indep.
1724 * configure.in (linux/version.h): Check for this header.
1726 1996-03-12 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1728 * configure.in: Remove -fno-builtin hackery from -lm check.
1730 1996-03-08 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1732 * configure.in (-lm check): If $GCC, append -fno-builtin to $CC for
1735 * configure.in (AC_PREREQ): Require version 2.8 of Autoconf.
1737 1996-03-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1739 * configure.in: Check for ncurses.
1741 1996-02-28 Paul Eggert <eggert@twinsun.com>
1743 * configure.in (LOCALTIME_CACHE):
1744 Also define if localtime mishandles unsetting TZ.
1745 This works around a localtime bug in mips-dec-ultrix.
1747 1996-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1749 * make-dist (finder-inf.el): Use finder-compile-keywords-make-dist.
1751 * configure.in: Improve messages about X versions.
1753 1996-02-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1755 * configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null.
1757 1996-02-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1759 * configure.in (HAVE_X11XTR6): Set it as a shell variable.
1760 (HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE.
1762 * Makefile.in (install-arch-dep): Depend on install-arch-indep.
1763 (install): Put install-arch-indep before install-arch-dep.
1765 1996-02-20 Dave Love <d.love@dl.ac.uk>
1767 * INSTALL: Clarify info about MS-DOS path handling.
1769 1996-02-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1771 * Makefile.in (install-arch-indep): Install info/ccmode*.
1772 In previous change, protect against /bin/pwd returning null string.
1774 1996-02-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1776 * Makefile.in (install-arch-indep): Copy build-dir's lisp subdir
1779 1996-02-01 Paul Eggert <eggert@twinsun.com>
1781 * configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar.
1783 1996-01-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1785 * configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails.
1787 1996-01-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1789 * Makefile.in (extraclean): Use ${top_distclean} to ensure
1790 we delete everything distclean deletes.
1792 1996-01-23 Karl Heuer <kwzh@gnu.ai.mit.edu>
1794 * make-dist (lwlib): Don't distribute lwlib-Xol* files.
1796 1996-01-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1798 * configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE
1799 into LDFLAGS instead of into LIBS.
1801 1996-01-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1803 * configure.in (HAVE_XMU): Fix typo in previous change.
1805 1996-01-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1807 * configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc.
1809 1996-01-10 Erik Naggum <erik@naggum.no>
1811 * configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'.
1813 1996-01-10 Karl Heuer <kwzh@gnu.ai.mit.edu>
1815 * Makefile.in (install-arch-indep): Ignore error if no chmod -R.
1817 1996-01-10 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1819 * configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit
1820 and use -lXt to link it.
1822 1996-01-08 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1824 * configure.in (locallisppath): Put version-specific dir first.
1826 1996-01-07 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1828 * configure.in (hppa-*-nextstep*): New alternative.
1829 (USE_X_TOOLKIT): By default, set this to "maybe";
1830 and change that later to LUCID or "no" according to X11 version.
1832 * make-dist: Recompile outdated .elc files and update all autoloads.
1834 1996-01-05 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
1836 * configure.in (locallisppath): Fix typo in last change: " -> '.
1838 1996-01-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1840 * configure.in (locallisppath): Add ../emacs/VERSION/site-lisp.
1842 1995-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1844 * Makefile.in (install-arch-indep): Give all files read permission.
1846 1995-12-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1848 * configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*):
1849 If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5.
1851 1995-12-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1853 * configure.in: Determine HAVE_X11R6.
1854 (HAVE_MENUS): Renamed from HAVE_X_MENU.
1856 1995-12-21 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1858 * configure.in: Just "solaris" now defaults to version 2.4.
1859 Add sunos4.1.n-noshare as alternative.
1861 1995-12-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1863 * configure.in (mips-sgi-irix6*): Set NON_GNU_CPP.
1865 1995-11-29 Erik Naggum <erik@naggum.no>
1867 * Makefile.in (install-arch-indep): Add missing backslash.
1869 1995-11-29 Karl Eichwalder <ke@ke.Central.DE>
1871 * Makefile.in (install-arch-indep): Don't install
1872 lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo.
1874 1995-11-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1876 * Makefile.in (install-arch-indep): Fix previous change.
1878 * configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*.
1880 1995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1882 * Version 19.30 released.
1884 * make-dist (lisp): Exclude subdirs.el.
1886 1995-11-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1888 * make-dist (etc): Delete *.orig and *.rej.
1890 1995-11-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1892 * Makefile.in (install-arch-indep): Rename old info/dir only if exists.
1894 1995-11-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1896 * configure.in (hppa*-hp-hpux10*): Use s/hpux10.h.
1898 1995-11-14 Geoff Voelker <voelker@cs.washington.edu>
1900 * make-dist (nt): Rename install, readme, and todo to
1901 INSTALL, README, and TODO.
1903 1995-11-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1905 * make-dist (lisp): Don't distribute site-start.
1907 1995-11-06 Karl Heuer <kwzh@gnu.ai.mit.edu>
1909 * make-dist: Break the hard link on alloca.c.
1911 1995-11-04 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1913 * configure.in (LIBS): Add libsrc_libs and keep the old LIBS.
1915 1995-11-02 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1917 * make-dist (src, lib-src): Don't distribute Makefile.c.
1918 (etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc.
1920 1995-10-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1922 * Makefile.in (mkdir): Create man1dir, not mandir.
1923 (uninstall): Use man1dir, not mandir.
1925 1995-10-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1927 * Makefile.in (man1dir): New variable.
1928 (install-arch-indep): Use man1dir.
1930 * configure.in (sparc-*-nextstep*): Remove incorrect .h's.
1932 * make-dist: Create lisp/MANIFEST.
1934 1995-10-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1936 * configure.in (m68k-*-linux*): New alternative.
1938 1995-10-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1940 * make-dist: Use new names config.in, paths.in, and
1941 {src,lib-src}/Makefile.in.
1943 1995-10-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1945 * configure.in: Don't bother checking for drem.
1947 1995-10-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1949 * Makefile.in (distclean): Delete line with just a tab in it.
1950 (install-arch-indep): Delete spaces that precede tabs.
1951 Delete spurious `fi' left from previous change.
1952 (install): Supply `true' as command, to avoid null command.
1954 1995-10-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1956 * configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'.
1958 1995-09-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1960 * configure.in (powerpc-*-solaris2): New alternative.x
1962 1995-09-12 Karl Heuer <kwzh@gnu.ai.mit.edu>
1964 * Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead
1965 of paths.h.tmp$$, to avoid going beyond 14 characters.
1967 1995-09-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1969 * configure.in: Improve error msg for invalid --with-x-toolkit value.
1971 1995-09-06 Paul Eggert <eggert@twinsun.com>
1973 * configure.in (LOCALTIME_CACHE): Define if tzset exists and
1974 if localtime caches TZ. Check for tzset.
1976 1995-09-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1978 * config.bat: Simplify using new names file names src/makefile.in,
1979 config.in, paths.in. Change Echo commands not to use `.
1981 1995-08-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1983 * Makefile.in (install-arch-indep): Always install the new dir file;
1984 rename the previous dir file to dir.bak or dir.old.
1986 1995-08-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1988 * configure.in (RANLIB): Substitute this into makefiles.
1989 Set it specially on solaris; set it by default on other systems.
1991 * configure.in: Fix previous Alpha change.
1993 1995-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1995 * configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and
1996 NON_GCC_TEST_OPTIONS.
1998 1995-08-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2000 * configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS
2001 from config.h, use SPECIFIED_CFLAGS to get what the user specified.
2003 * configure.in (alpha-*-linux*): New configuration.
2005 1995-08-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2007 * configure.in (m68*-next-*): Use m68k.h and nextstep.h.
2008 (m68k-next-nextstep*): New alias for that.
2009 (i*86-*-nextstep*): Use nextstep.h.
2010 (sparc-*-nextstep*): New configuration.
2012 1995-08-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2014 * configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS.
2015 And get CFLAGS from config.h if SPECIFIED_CFLAGS is null.
2017 1995-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2019 * configure.in: Handle sunos4shr by sharing; not like sunos4*.
2020 Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment.
2022 1995-07-18 Mike Long <mike.long@analog.com>
2024 * make-dist: Fix update of finder-inf.el, and byte-compile it.
2026 1995-07-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2028 * Makefile.in (src/paths.h, paths-force):
2029 Rename src/paths.h.in to src/paths.in.
2030 (Makefile): Depend on src/Makefile.in, not src/Makefile.in.in.
2032 * configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in.
2033 Use Makefile.c for intermediate file.
2034 Rename src/config.h.in to src/config.in.
2036 1995-07-17 Richard Stallman <rms@gnu.ai.mit.edu>
2038 * configure.in (mips-dec-ultrix*): Assume version 4.3.
2039 (mips-dec-ultrix4.[12]): New alternative for old versions.
2041 1995-07-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2043 * make-dist: Don't break intra-tree links.
2045 1995-07-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2047 * configure.in: Put back archlibdir initialization. Require
2048 autoconf 2.4.1 or later.
2050 1995-07-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2052 * configure.in: Use sunos4shr normally for Sunos 4.1.[3-9].
2053 (mips-mips-riscos5*): New alternative.
2055 1995-06-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2057 * Makefile.in (uninstall, install-arch-indep): Install info/ediff*.
2059 1995-06-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2061 * configure.in (bindir, datadir, sharedstatedir, libexecdir)
2062 (mandir, infodir, archlibdir): Initializations deleted.
2064 * configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4.
2065 On hpux9shr, use hpux9shxr4.h.
2067 1995-06-24 Morten Welinder <terra+@cs.cmu.edu>
2069 * configure.in: Added target mips-dec-mach_bsd4.3.
2070 * config.guess: Guess mips-dec-mach_bsd4.3.
2072 1995-06-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2074 * Makefile.in (mkdir): Use symbolic chmod.
2076 1995-06-22 Paul Eggert <eggert@twinsun.com>
2078 * configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3.
2079 (Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.)
2081 1995-06-22 Paul Eggert <eggert@twinsun.com>
2083 * Makefile.in (SUBDIR_MAKEFILES):
2084 Add man/Makefile, so `make distclean' removes it.
2085 (top_distclean): Add config.log to the list of files to be removed.
2087 1995-06-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2089 * Version 19.29 released.
2091 1995-06-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2093 * configure.in: Fix the previous change to verify that the -b
2094 option really solves the problem.
2096 * make-dist (nt): Explicitly include makefile.nt and makefile.def only.
2098 1995-06-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2100 * configure.in: Test whether XFree86 needs -b i486-linuxaout to link.
2102 1995-06-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2104 * configure.in: Report more clearly when there is no special
2105 dir to search for X includes or libraries.
2107 1995-06-13 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2109 * configure.in: Check for -lpthreads, not -lpthread.
2111 1995-06-09 Geoff Voelker <voelker@cs.washington.edu>
2113 * make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in.
2115 1995-06-08 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2117 * configure.in: Check for -lpthread.
2119 1995-06-05 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2121 * Makefile.in (install-arch-indep): Install info files for mh-e.
2122 (uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc.
2124 1995-06-01 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2126 * configure.in (*-solaris2.5): New configuration.
2128 * make-dist: Copy new files config.nt and config.w95.
2130 1995-05-30 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2132 * configure.in: Use x_includes, not x_libraries, for -I.
2133 Make bitmapdir a colon-separated list.
2135 1995-05-27 Richard Stallman <rms@gnu.ai.mit.edu>
2137 * configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations.
2139 * configure.in: Allow x_libraries and x_includes to be paths.
2141 1995-05-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2143 * configure.in: Fix typo.
2145 1995-05-24 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2147 * INSTALL: Clarify use of site-init.el.
2149 1995-05-22 enami tsugutomo <enami@sys.ptg.sony.co.jp>
2151 * configure.in: pass arg to sqrt.
2153 1995-05-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2155 * make-dist: Fix May 6 change.
2157 1995-05-17 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2159 * vpath.sed: Delete reference to ymakefile.
2161 1995-05-09 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2163 * configure.in: Use sqrt (more portable) instead of fmod in -lm
2166 1995-05-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2168 * make-dist: Put nt/emacs.ico and nt/emacs.rc in dist.
2170 * update-subdirs: Specify /bin/sh to run the script.
2172 1995-05-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2174 * make-dist: Put src/makefile.nt in dist.
2176 * configure.in (i[345]86-*-bsdi2*): New configuration.
2177 (vax-dec-bsd386*): Deleted.
2179 1995-05-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2181 * configure.in: Make sure CDPATH doesn't mess up PWD check. Check
2182 whether X bitmaps are in X11/bitmaps instead of bitmaps. Use fmod
2183 instead of logb in -lm check.
2185 1995-05-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2187 * configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
2188 Use bsd4-3. Don't set NON_GNU_CPP.
2190 * make-dist: Don't copy in src/s/*.inp. Don't copy nt/src.
2191 In nt. copy various different things, but not *.cmd.
2192 Fix the ln commands for the subdirs of nt.
2194 1995-04-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2196 * configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h.
2198 1995-04-27 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2200 * configure.in (*-sun-sunos4.1.3*): Use shared libraries,
2201 since that's what the header file expects.
2203 1995-04-24 Francesco Potorti` (pot@cnuce.cnr.it)
2205 * configure.in (m68k-motorola-sysv*): Distinguish between 68030
2206 and 68040 based machines when choosing options for gnucc.
2208 1995-04-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2210 * Makefile.in (top_distclean): Delete config.cache.
2212 1995-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2214 * Makefile.in (install-arch-indep): Delete .#* when copying subdirs.
2216 * configure.in: Use m/ncr386.h.
2218 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2220 * Makefile.in (install-arch-indep): Undo Sep 23 change.
2222 1995-04-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2224 * make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore.
2225 (man): Don't copy texindex.c and getopt.c; they're deleted.
2226 (etc): Omit `e'; it's a subdirectory.
2227 (etc/e): Use `../..', not `..', to reference top level.
2229 1995-04-06 Simon Leinen <simon@lia.di.epfl.ch>
2231 * Makefile.in (install-arch-indep, dist):
2232 look for `update-subdir' in $(srcdir).
2234 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2236 * make-dist: Include mkinstalldirs in distribution.
2238 1995-04-05 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2240 * make-dist: Add missing close backquote.
2242 1995-04-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2244 * make-dist: Don't distribute shortnames directory.
2246 1995-03-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2248 * Makefile.in (blessmail): Pass archlibdir to the sub-make.
2250 1995-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2252 * configure.in (m88k-motorola-sysv4*): Use usg5-4-2.
2254 1995-02-23 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2256 * configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args.
2258 1995-02-13 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2260 * configure.in (mips-sgi-irix6): New configuration.
2262 1995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2264 * Makefile.in (maintainer-clean): Renamed from realclean.
2266 1995-02-02 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2268 * configure.in: Create a .gdbinit that sources the real one, if
2269 using a different build directory.
2271 1995-01-23 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2273 * configure.in: Check for sys/select.h.
2275 1995-01-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2277 * configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP.
2279 1994-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2281 * configure.in: Handle isc 4.1 operating system.
2283 1994-12-10 Richard Stallman <rms@kepa>
2285 * configure.in (rs6000-ibm-aix4.1*): New alternative.
2286 (rs6000-ibm-aix4*): New alternative.
2288 1994-12-06 Richard Stallman <rms@kepa>
2290 * configure.in: For SVR4.2, set NON_GNU_CPP if not already set.
2292 1994-11-30 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2294 * configure.in: Don't try to make directories that are guaranteed
2297 1994-11-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2299 * configure.in: Generate man/Makefile from man/Makefile.in.
2300 Create the man subdir.
2302 * Makefile.in (dvi): Run Make in our man subdir.
2304 * make-dist: Create subdir etc/e.
2306 Put man/Makefile.in in dist, instead of man/Makefile.
2308 1994-11-21 David J. MacKenzie (djm@mole.gnu.ai.mit.edu)
2310 * configure.in: Add --with-pop, --with-kerberos, and
2311 --with-hesiod for movemail.
2313 1994-11-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2315 * configure.in (m68*-apollo*): Use s/domain.h.
2317 1994-11-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2319 * configure.in (m68*-apollo*): Set NON_GNU_CPP.
2321 1994-11-14 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2323 * configure.in: Don't add -I, -L, -R options for cc if their
2324 arguments would be empty.
2326 1994-11-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2328 * configure.in (i860-intel-osf1*): New alternative.
2329 (mips-sgi-irix5.[01]*): Distinguish from irix5*.
2330 (mips-sgi-irix*): Now an alias for mips-sgi-irix5*.
2332 1994-11-09 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2334 * configure.in: Make h_errno check not use nested functions.
2336 1994-11-09 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2338 * Makefile.in (install-arch-indep): Delete *.orig in copied dirs.
2340 1994-11-08 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
2342 * Makefile.in (install-arch-indep): Avoid continued comment
2343 swallowing target line.
2345 1994-11-08 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu)
2347 * configure.in: Protect a character class with `changequote'.
2349 1994-11-07 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2351 * configure.in: Accept `news' as a synonym for `newsos'.
2353 1994-11-03 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2355 * Makefile.in: Don't rm files if cd fails.
2357 1994-11-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2359 * make-dist: Put nt subdir and its subdirs in the dist.
2360 (lib-src): Put makefile.nt in the dist.
2361 (lisp): Put makefile.nt in the dist.
2363 1994-10-29 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2365 * configure.in: Change a stray `[' to `test'.
2367 1994-10-28 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2369 * configure.in: Adapt for Autoconf v2. Use the standard argument
2370 parser, host type canonicalizer, X11 finder, and message
2371 printing macros. Use the new macro names. Use `test' instead of `['.
2373 1994-10-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2375 * configure.in: Check for getpagesize.
2377 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2379 * make-dist (msdos): Put sed* in the distribution.
2381 1994-10-17 Morten Welinder <terra@mole.gnu.ai.mit.edu>
2383 * config.bat: New option, `--with-x', for configuring Emacs
2384 for use with the X11 system DesqView/X.
2385 New option, `--no-debug', for compiling Emacs without debug
2386 information thus saving disk space.
2387 (src/config.h, src/paths.h): Use `update' (which is like
2388 `move-if-changed') to change the file.
2389 (src/config.h): When configuring for X11 perform extra changes.
2390 (src/makefile): When configuring for X11 perform extra changes.
2391 (lib-src): Remove temporary files.
2392 (): Check that `sed', `rm', `mv', and `gcc' are available.
2394 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2396 * Makefile.in (sharedstatedir): Substitute sharedstatedir properly.
2398 * configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps.
2400 1994-10-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2402 * configure.in (EMACS_CONFIGURATION): Use $canonical as value.
2404 * configure.in (canonical): Substitute var into makefiles.
2405 (bitmapdir): Likewise.
2407 * Makefile.in (bitmapdir): New variable.
2408 (src/paths.h, paths-force): Edit PATH_BITMAPS.
2410 1994-10-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2412 * make-dist: Put update-subdirs and lisp/subdirs.el in the dist.
2414 * Makefile.in (dist, install-arch-indep): Run update-subdirs.
2415 * update-subdirs: New shell script.
2417 1994-10-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2419 * Makefile.in (top_distclean): Don't rm build-install.
2420 (SOURCES): Delete build-install.in.
2422 * make-dist: Don't distribute build-ins.in.
2423 * build-ins.in: File deleted.
2425 1994-10-12 David J. MacKenzie (djm@duality.gnu.ai.mit.edu)
2427 * Makefile.in (mkdir): Use mkinstalldirs instead of make-path.
2429 1994-10-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2431 * Makefile.in: Use libexecdir and sharedstatedir as appropriate.
2433 * configure.in (libexecdir): Renamed from libdir. New default.
2434 (sharedstatedir): Renamed from statedir. New default.
2435 (datadir): New default.
2437 * make-dist: Don't distribute subdirs.el.
2439 1994-10-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2441 * configure.in (eaccess): Check for it.
2443 1994-10-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2445 * configure.in (mktime): Check for it.
2447 1994-10-02 Paul Reilly <pmr@geech.gnu.ai.mit.edu>
2449 * configure.in (motif): Add support for usage and option checking.
2451 1994-09-24 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2453 * configure.in (utimes): Check for it.
2455 1994-09-23 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2457 * Makefile.in (install-arch-indep): Don't do mkdir here.
2459 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2461 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2462 riscix.h renamed to acorn.h.
2464 1994-09-21 Michael Ben-Gershon (mybg@cs.huji.ac.il)
2466 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2469 1994-09-21 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2471 * configure.in: Remove trailing slashes from srcdir.
2473 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2475 * configure.in (i[345]86-sequent-ptx*): Handle
2477 1994-09-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2479 * Makefile.in (paths-force): Depend on src/paths.h
2481 1994-09-19 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2483 * configure.in (config_options): Save all arguments, not just some.
2485 1994-09-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2487 * Makefile.in (install-arch-indep): Copy DOC-*, not DOC*
2489 * configure.in: Add AC_AIX.
2490 Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT.
2492 1994-09-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2494 * configure.in (parsing options): Simplify sed command to delete -'s.
2496 1994-09-16 Karl Heuer <kwzh@churchy.gnu.ai.mit.edu>
2498 * configure.in (config_options): New shell variable.
2499 Pass its value to C code in EMACS_CONFIG_OPTIONS.
2501 1994-09-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2503 * configure.in (alpha-dec-osf*): New target.
2505 * Makefile.in: Use just one FRC target.
2507 1994-09-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2509 * Makefile.in (removenullpaths, paths-force):
2510 Use name paths.h.tmp$$, which depends on the pid.
2512 1994-09-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2514 * Makefile.in (removenullpaths, paths-force):
2515 Put paths.h.tmp in top-level dir, not in src.
2517 1994-09-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2519 * Version 19.27 released.
2521 1994-09-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2523 * Version 19.26 released.
2525 1994-09-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2527 * configure.in: Check for lrand48, not rand48.
2529 1994-09-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2531 * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5)
2532 (powerpc-ibm-aix*): New aliases.
2534 1994-08-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2536 * make-dist (src/m, src/s): Put *.inp in distribution.
2538 1994-08-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2540 * configure.in: Accept i586 and i486 along with i386.
2542 1994-08-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2544 * configure.in: Do compute unexec, LIBX, system_malloc, etc
2545 even if CPP env var was set by the user.
2547 * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value.
2549 1994-08-14 Jonathan I. Kamens (jik@gza-client1.aktis.com)
2551 * Makefile.in: Uninstall "$(EMACS)", not "emacs".
2553 1994-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2555 * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP.
2557 1994-08-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2559 * configure.in: Check more specifically for i*86-sun-sunos.
2561 1994-08-03 Caveh Jalali (caveh@eng.sun.com)
2563 * configure.in: Handle solaris 2.4.
2565 1994-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2567 * configure.in (rand48): Check for it.
2569 1994-07-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2571 * make-dist: Update the info files.
2573 1994-07-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2575 * configure.in: Make "checking..." messages' style consistent.
2576 (HAVE_H_ERRNO): New test.
2578 1994-07-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2580 * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP.
2582 1994-07-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2584 * configure.in (CFLAGS): If the envvar was specified, use that.
2585 And set REAL_CFLAGS from it too.
2587 1994-07-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2589 * make-dist: Update finder-inf.el.
2591 1994-07-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2593 * make-dist (msdos): Include sed4.inp in dist.
2595 * Makefile.in (libsrc_libs): Var deleted.
2597 1994-07-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2599 * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands.
2601 1994-06-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2603 * configure.in (mips-sony-newsos4*): New alias.
2605 1994-06-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2607 * configure.in (*-convex-bsd*): Set NON_GNU_CPP.
2608 (*-convex-convexos*): Accept this as alias.
2610 1994-06-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2612 * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE,
2613 for two different uses.
2615 1994-06-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2617 * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc.
2619 1994-06-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2621 * make-dist: Put ./BUGS into the distrib.
2623 1994-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2625 * configure.in: Handle 386 running Solaris 2.
2627 1994-06-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2629 * configure.in (mips-siemens-sysv*): Use cpp, not cc -E.
2631 1994-06-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2633 * configure.in (mips-sony-newsos*): Use news-risc.h.
2635 * configure.in: Accept bsdi as opsys, like bsd386.
2637 1994-06-01 Morten Welinder (terra@diku.dk)
2639 * config.bat (src/paths.h): Use sed script msdos/sed4.inp.
2641 1994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2643 * Version 19.25 released.
2645 * make-dist (shortversion): Don't assume another period follows.
2647 1994-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2649 * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd.
2650 (uninstall): Use /bin/pwd.
2652 * Makefile.in (blessmail): Depend on src.
2653 (all): Don't depend on blessmail.
2655 * Makefile.in (src/paths.h): Don't force recomputation.
2656 (paths-force): New target; force recomputation of paths.h.
2657 (all): Depend on paths-force.
2658 (src, lib-src): Depend on src/paths.h.
2660 * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS,
2661 NON_GCC_TEST_OPTIONS.
2663 1994-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2665 * configure.in: Don't insist on subversions for irix.
2667 1994-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2669 * configure.in (hppa*-hp-hpux9shr): Move alternative up.
2671 * configure.in (i[34]86-next-*): New alternative.
2673 1994-05-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2675 * Version 19.24 released.
2677 * configure.in: New config hppa*-hp-hpux9shr*.
2679 1994-05-22 Morten Welinder (terra@tyr.diku.dk)
2681 * config.bat: Doc fix.
2683 1994-05-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2685 * Makefile.in (mostlyclean, clean, distclean, realclean)
2686 (extraclean): Don't act on man subdir if it doesn't exist.
2688 1994-05-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2690 * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars.
2691 Use them to set up CC.
2692 (*-sun-sunos4.1.3): Set them.
2694 1994-05-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2696 * Makefile.in (lib-src): Don't depend on src/paths.h.
2698 1994-05-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2700 * build-ins.in (copydests): Get rid of spurious `-'s.
2702 * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION.
2704 1994-05-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2706 * Version 19.23 released.
2708 * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS
2709 for the Xlib and Xt checks; then restore old CFLAGS.
2711 1994-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2713 * configure.in (HAVE_X11XTR6): Add newline before #if.
2714 Add newline after #endif.
2716 1994-05-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2718 * configure.in (HAVE_X11XTR6): Arrange to define it.
2720 1994-05-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2722 * Makefile.in (install): Depend on blessmail.
2724 1994-05-12 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2726 * configure.in (mips-siemens-sysv*): Put quotes around value
2729 1994-05-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2731 * Makefile.in (TAGS): Use the makefile in src subdir.
2733 1994-05-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2735 * configure.in (opsys): Recognize `gnu'.
2737 1994-05-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2739 * configure.in (using NON_GNU_CPP): Fix test for CPP already set.
2741 1994-05-09 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2743 * configure.in: Remove AC_LANG_C call. Not needed with Autoconf
2746 1994-05-08 Morten Welinder (terra@diku.dk)
2748 * config.bat: Forcibly remove "# " style comments from makefiles.
2750 1994-05-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2752 * Makefile.in (uninstall): When processing lispdir and etcdir,
2753 do nothing unless it exists and is a directory.
2755 1994-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2757 * Makefile.in (install-arch-indep): Do install info/dired-x*.
2758 Merge code in from install-doc.
2759 (install-doc): Merge code back into install-arch-indep.
2760 (install-arch-dep): Don't depend on install-doc.
2762 * configure.in (run_in_place): Don't use pwd for archlibdir and docdir.
2764 1994-05-04 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2766 * configure.in (making src/Makefile and lib-src/Makefile):
2767 Split off the autoconf substitutions and don't pass them thru cpp.
2768 (undefs): Use $canonical as well as $configuration.
2770 * make-dist: Distribute lisp/Makefile.
2772 * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*.
2773 Use lower case names for the s files.
2775 1994-05-03 Morten Welinder (terra@diku.dk)
2777 * config.bat: Added possibility for different file name
2778 transscriptions in lib-src.
2780 1994-05-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2782 * Makefile.in (lib-src): Undo previous change.
2783 (blessmail): New target to run maybe-blessmail in lib-src.
2784 (all): Depend on blessmail.
2786 * Makefile.in (lib-src): Depend on src.
2788 1994-04-30 Paul Reilly (pmr@churchy.gnu.ai.mit.edu)
2790 * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3.
2791 (m88k-dg-dgux5.4R2): dgux5.4R2.
2793 1994-04-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2795 * configure.in (window_system): Restore accidentally deleted code
2796 that uses AC_FIND_X.
2798 * make-dist: Distribute config.bat.
2800 1994-04-29 Morten Welinder (terra@diku.dk)
2802 * config.bat: Corrected the configuration of lib-src
2803 to keep up with configure. Add note about dos version 3
2804 or better needed (djgpp needs that). Add note explaining
2805 that either install in c:/emacs or edit the script.
2806 Don't change to c:/emacs, but assume we're there (to minimize
2807 the number of places to change).
2809 * config.bat: Build-in the first step towards X11 support with
2810 the X11 emulator that exists. At this time it won't work,
2811 and several files are missing.
2813 1994-04-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2815 * configure.in: Use m/hp800.h in place of m/hp9000s800.h.
2816 Don't look for -lresolv.
2818 * Makefile.in (lib-src): Depend on src/paths.h.
2820 1994-04-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2822 * configure.in: Restore deleted AC_SUBST of `configuration'.
2823 Improve error message for bad --with-x-toolkit value.
2825 * configure.in: Define CONFIGURATION in src/config.h
2826 rather than substituting in src/Makefile.in.
2828 1994-04-26 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2830 * Makefile.in (install-doc): New target.
2831 (install-arch-dep): Depend on install-doc.
2832 (mkdir): Create docdir.
2834 1994-04-22 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2836 * configure.in: Test for libresolv.a.
2837 Substitute machfile and opsysfile.
2839 1994-04-22 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2841 * Makefile.in (.PHONY, install): Kill reference to obsolete do-install.
2842 (install-arch-dep): Install under the name $(EMACS).
2844 1994-04-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2846 * configure.in (version): Use entire value of emacs-version.
2847 (mips-siemens-sysv*): New alternative.
2849 1994-04-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2851 * Makefile.in (install-arch-indep): Don't install dired-x*.
2853 1994-04-18 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2855 * configure.in (src/Makefile, lib-src/Makefile): Delete ^L.
2856 Fix definition of $undefs.
2858 1994-04-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2860 * configure.in (window_system): Obey --with-x11=no and --with-x10=no.
2862 * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I.
2864 1994-04-16 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2866 * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE.
2868 1994-04-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2870 * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in
2871 and run it thru cpp, as with src/Makefile.in.
2873 * configure.in: Use AC_SET_MAKE.
2875 1994-04-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2877 * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2.
2879 1994-04-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2881 * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@.
2883 * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes.
2884 (printing the choices): Make the toolkit message unconditional.
2885 (USE_X_TOOLKIT): Use `none', not `no', if none.
2886 (include libsrc_libs): Include config.h, and specify -I for srcdir.
2887 Get rid of temp file foofoo1.
2889 1994-04-13 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2891 * configure.in (CFLAGS): Use shell syntax, not Makefile.
2893 1994-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2895 * configure.in (window_system): If no X, set USE_X_TOOLKIT=no.
2896 (printing the choices): State choice of toolkit.
2897 (libsrc_libs): Recalculate after writing config.h;
2898 then update lib-src/Makefile.
2900 1994-04-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2902 * configure.in: Add sunos4shr as alternative for suns.
2903 Conditionals testing for null $CC were backwards.
2905 1994-04-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2907 * make-dist (msdos): Don't link patch1. Link sed*.inp, not sed.in*.
2909 1994-04-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2911 * configure.in: Handle -isc4.0*.
2913 1994-03-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2915 * configure.in (esix5): Set NON_GNU_CPP.
2917 1994-03-24 Roland McGrath (roland@mole.gnu.ai.mit.edu)
2919 * Makefile.in (thisdir): Nonsensical variable removed.
2920 (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd
2921 back to $thisdir, rather than the directory `this_dir'.
2923 1994-03-17 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2925 * Makefile.in (install-arch-indep): Add missing backslash after a
2928 1994-03-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2930 * Makefile.in (thisdir): New variable.
2931 (install-arch-indep): Go back to thisdir to run INSTALL_DATA.
2933 1994-03-08 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2935 * configure.in: Add freebsd.
2937 1994-03-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2939 * configure.in: Check for fpathconf.
2941 1994-03-02 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2943 * configure.in (with_x_toolkit): Fix typo in previous change.
2945 1994-03-01 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2947 * configure.in: New s-file for rs60000-ibm-aix3.2.5.
2949 1994-02-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2951 * configure.in (with_x_toolkit): Don't allow motif or open-look.
2953 1994-02-24 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2955 * configure.in: Fix value of docdir.
2956 * Makefile.in (install-arch-indep): Install DOC* in docdir.
2958 1994-02-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2960 * configure.in (*-sysv4.1): Set NON_GNU_CPP.
2962 1994-02-22 Karl Heuer (kwzh@geech.gnu.ai.mit.edu)
2964 * configure.in: New variable docdir to control where the docstring
2966 Makefile.in: Use it to initialize PATH_DOC in paths.h.
2968 1994-02-22 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2970 * configure.in: When --run-in-place, don't inherit archlibdir.
2972 1994-02-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2974 * Makefile.in (install-arch-dep, install-arch-indep):
2975 New targets split up former do-install rule.
2976 (do-install): Target deleted.
2978 1994-02-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2980 * configure.in (mips-sony-newsos*): New configuration.
2982 1994-02-14 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu)
2984 * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
2986 1994-02-11 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2988 * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX.
2990 1994-02-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2992 * configure.in: Don't initialize CC.
2994 1994-02-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2996 * configure.in (creating src/Makefile): Also generate -U switches
2997 for symbols in the $configuration value.
2999 * configure.in: Check for sys_siglist being declared in system header.
3001 1994-02-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3003 * configure.in (creating src/Makefile): Delete blank lines
3004 along with lines of whitespace.
3005 (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value.
3007 1994-02-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3009 * configure.in: Get, use, and substitute C_SWITCH_MACHINE
3010 like C_SWITCH_SYSTEM.
3011 (m68*-motorola-sysv*): Set CC. Require cpu type to be m68k or m68000.
3013 1994-02-04 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3015 * configure.in (drem): Check for this function.
3017 1994-02-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3019 * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces.
3020 If CPP was inherited from environment, don't use NON_GNU_CPP.
3021 (NON_GNU_CC): Likewise.
3022 (handling with_gcc): Use explicit if in the `no' case.
3023 (cc_specified): New variable; if set, don't use NON_GNU_CC.
3025 1994-02-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3027 * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP.
3029 1994-02-01 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3031 * configure.in: Check whether fmod exists.
3033 1994-01-31 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3035 * make-dist: Distribute {src,lisp}/ChangeLog.? instead of
3036 {src,lisp}/OChangeLog.
3038 1994-01-22 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3040 * configure.in: Restore Jan 8 and Jan 16 changes. The -U hack is
3041 necessary for proper operation. This code works with the current
3042 released version of Autoconf.
3044 1994-01-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3046 * configure.in (with_x_toolkit): Treat values athena and lucid alike.
3047 (USE_X_TOOLKIT): Define it for all values except `no'.
3049 * configure.in: Undo first Jan 8 change and Jan 16 change.
3051 1994-01-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3053 * configure.in: Handle --with-x-toolkit. Produce lwlib/Makefile.
3054 Substitute USE_X_TOOLKIT as both C macro and Make variable.
3056 * Makefile.in (lwlib/Makefile): New target.
3057 (SUBDIR_MAKEFILES): Depend on lwlib/Makefile.
3058 (clean, mostlyclean, distclean, realclean): Handle lwlib subdir.
3059 (unlock, relock): Handle lwlib subdir.
3061 * Makefile.in: Add some .PHONY targets.
3063 * make-dist: Handle lwlib subdir like oldXMenu subdir.
3065 * lwlib: New subdirectory.
3067 1994-01-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3069 * configure.in: If CPP has a value that is a directory,
3072 1994-01-16 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3074 * configure.in (srcdir_undefs): Add g flag to sed substitution to
3077 1994-01-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3079 * Makefile.in (do-install): Install the dired-x info files.
3081 * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX.
3084 1994-01-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3086 * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs.
3088 1994-01-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3090 * configure.in (creating src/Makefile): Put code inside 2nd arg to
3091 AC_OUTPUT as it should be; hopefully noone will again see fit to
3092 gratuitously break this and not make a change log entry.
3093 Optimized sed processing of Makefile.in and cpp output; now
3094 preserves comments previously removed from the cpp input.
3095 Eliminated temp file for cpp output. Generate -U switches to
3096 undefine all identifiers that appear in the directory name
3097 ${srcdir}; pass these to cpp.
3099 * configure.in (version): Fix sed regexp to match two-elt version
3102 * configure.in: Check for strerror.
3104 1994-01-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3106 * configure.in: Test for bcmp.
3108 1994-01-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3110 * make-dist (tempdir): Put subdir msdos into the distribution.
3112 1993-01-07 Morten Welinder (terra@diku.dk)
3114 * config.bat: New file.
3116 1994-01-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3118 * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS.
3120 1994-01-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3122 * configure.in (m68*-next-*): Don't care about which os is specified.
3123 (i[34]86-*-*): Check for *-nextstop*.
3125 1993-12-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3127 * configure.in: Check for setsid.
3129 1993-12-17 Richard Stallman (rms@srarc2)
3131 * configure.in (*-sun-solaris*): Add special case for Solaris 2.3.
3133 1993-12-15 Richard Stallman (rms@srarc2)
3135 * Makefile.in (mkdir): Make only the lockdir writable.
3137 * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
3139 1993-12-11 Richard Stallman (rms@srarc2)
3141 * Makefile.in (libdir): Use @libdir@.
3143 1993-12-08 Richard Stallman (rms@srarc2)
3145 * Makefile.in (install): Add empty command.
3147 1993-12-04 Richard Stallman (rms@srarc2)
3149 * make-dist: Put man/getopt.c in the dist.
3151 * configure.in (LIBS): Add test for existence of XSetWMProtocols.
3153 * Makefile.in (install): Depend on ${SUBDIR}, not `all'.
3155 1993-12-03 Richard Stallman (rms@srarc2)
3157 * configure.in (solaris): Set NON_GNU_CPP instead of CPP.
3158 Set it for all solaris versions.
3159 (mips-mips-riscos4*): Set NON_GNU_CC, not CC.
3160 (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP.
3161 Likewise for NON_GNU_CC and CC.
3163 1993-12-01 Richard Stallman (rms@srarc2)
3165 * configure.in (mips-mips-riscos4*): Assign variable CC.
3166 (checking ${with_gcc}): If "no", don't override CC if already set.
3167 (CC): Initialize it as empty.
3169 1993-11-30 Richard Stallman (rms at srarc2)
3171 * configure.in (Suns): Set CPP if *-solaris2.3*.
3173 1993-11-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3175 * Version 19.22 released.
3177 * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs.
3179 1993-11-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3181 * make-dist: When breaking links, use cp -p.
3182 Copy install.sh into distribution.
3183 Move the temp dir up into the parent dir;
3184 don't leave the staging dir make-dist.tmp... in existence.
3185 * install.sh: New file.
3187 1993-11-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3189 * configure.in (i[34]86-ncr-sysv*): New specific alternative.
3191 1993-11-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3193 * configure.in (version): When --run-in-place, exclude
3194 ${datadir}/emacs/site-lisp from locallisppath.
3196 1993-11-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3198 * configure.in: Delete jumk.c before writing it.
3200 1993-11-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3202 * Version 19.21 released.
3204 * Makefile.in (mkdir): Ignore error from chmod.
3206 1993-11-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3208 * make-dist: Don't put lisp/forms.README in the distribution.
3210 1993-11-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3212 * configure.in (creating src/Makefile): Before running cpp,
3213 discard all lines that start with `# Generated' or /**/#.
3215 1993-11-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3217 * Version 19.20 released.
3219 * make-dist: Use build-ins.in, not build-install.in.
3220 Don't bother updating TAGS since it's not included.
3222 * build-ins.in: Renamed from build-install.in.
3224 1993-11-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3226 * make-dist: Don't try to link *.texinfo--there are none now.
3227 When running make in lib-src, specify YACC var value.
3229 1993-10-03 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3231 * configure.in (extrasub): Add vpath patterns for %.[yls].
3233 * configure.in: Don't do seddery on config.status after AC_OUTPUT.
3234 Instead just include the commands to make src/Makefile as the
3235 second arg to AC_OUTPUT.
3237 * configure.in: Use : instead of dnl for comment inside
3240 * configure.in: No longer use vpath_sed. Instead, when we notice
3241 srcdir already configured, set extrasub to hack vpath in the
3244 * configure.in: In cmds to make src/Makefile, chmod Makefile.new
3246 * Makefile.in (VPATH): Define to @srcdir@.
3248 1993-09-28 Brian Fox (bfox@cubit)
3250 * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
3251 doesn't exist. Just copy src/Makefile.in instead. Touch
3252 all of the Makefiles after editing config.status.
3254 * INSTALL: Update documentation to match new configuration
3257 1993-09-27 Brian Fox (bfox@ai.mit.edu)
3259 * configure.in: Allow any of the path or directory Makefile
3260 variables to be set with flags to configure. Create all Makefiles
3261 at configure time. Edit special commands into config.status after
3262 src/Makefile.in is built from src/Makefile.
3264 * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile):
3265 If these files are out of date, simply have config.status
3266 rebuild them; don't rebuild them explicitly.
3268 1993-09-25 Brian Fox (bfox@ai.mit.edu)
3270 * build-install.in: Change src/xemacs to src/emacs. We no longer
3271 create src/xemacs, so the file wouldn't be found.
3273 * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'.
3275 1993-09-24 Brian Fox (bfox@albert.gnu.ai.mit.edu)
3277 * configure.in: Avoid forcing the search of /usr/include before
3278 fixed include files by resetting C_SWITCH_X_SITE if it is
3281 1993-09-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3283 * Makefile.in (@rip_paths@locallisppath):
3284 Delete ${datadir}/emacs/site-lisp.
3286 1993-09-15 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3289 Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value.
3290 Remove ${extra_output} from AC_OUTPUT call.
3292 1993-09-17 Brian Fox (bfox@inferno)
3294 * make-dist: Quote backquotes found in strings to be echoed.
3296 * configure.in: Use "sh -c pwd" when we want to avoid having the
3297 shell fix up the value of $PWD.
3299 1993-09-13 Brian Fox (bfox@inferno)
3301 * Makefile.in (do-install): Don't abort if ln or chmod at the end
3302 of the installation fail. Suggested by Karl Berry.
3304 1993-08-30 Brian Fox (bfox@inferno)
3306 * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make"
3307 was used. Set MAKEFLAGS from MFLAGS.
3309 1993-09-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3311 * configure.in: Test for res_init in libc.
3313 1993-09-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3315 * configure.in: In the file ${tempcname}, use configure___
3316 instead of @configure@.
3318 1993-09-12 Roland McGrath (roland@sugar-bombs.gnu.ai.mit.edu)
3320 * make-dist: Dist vpath.sed
3322 * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile):
3323 Depend on vpath.sed.
3324 Replace sed comand for VPATH with @vpath_sed@.
3326 * configure.in: Substitute variable `vpath_sed'.
3327 If not in $srcdir and $srcdir is configured,
3328 issue warning that GNU make is required,
3329 and set vpath_sed to use vpath.sed script.
3331 1993-09-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3333 * configure.in: Remove check for $srcdir being configured. This
3334 pretty much works now.
3335 Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
3336 Check for XFree86 (/usr/X386/include) independent of whether
3339 * Makefile.in (info, dvi, clean, mostlyclean, distclean,
3340 realclean, unlock, relock): Use `$(MAKE)' in place of plain
3343 1993-08-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3345 * Version 19.19 released.
3347 * configure.in (i386-*-sunos4): Assume Sunos 4.0.
3349 1993-08-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3351 * configure.in: Check for XScreenNumberOfScreen.
3353 1993-08-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3355 * configure.in: Add * to end of all configuration alternatives.
3356 (m68*-sony-newsos3*): New alternative.
3358 1993-08-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3360 * make-dist: Include getdate.c in distribution.
3362 * configure.in: For --help, use $PAGER if it is set.
3363 (LIB_X11_LIB): Default to -lX11.
3364 (mips-sgi-irix5.*): New alternative.
3366 * Makefile.in (do-install): Install info/gnus* and info/sc*.
3368 * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*):
3369 Recognize *.B8.* as hpux version 8.
3370 (m68*-tektronix-bsd*): Fix typo in tek4300.
3371 (AC_HAVE_FUNCS): Add ftime.
3373 1993-08-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3375 * configure.in (m88k-tektronix-sysv3*): Added the missing *.
3376 Use tekxd88, not tekXD88.
3378 1993-08-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3380 * configure.in: Check for -lm. Then can check for frexp and logb.
3382 1993-08-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3384 * Version 19.18 released.
3386 * make-dist (src): Don't put gnu-hp300 in dist.
3387 (src, lisp): Include OChangeLog in dist.
3389 1993-08-08 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3391 * configure.in: Test for presence of logb and frexp functions.
3393 1993-08-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3395 * configure.in (machine): Add i370-ibm-aix*.
3397 1993-08-03 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3399 * configure.in (function checks): Test for mkdir and rmdir.
3401 * configure.in (function checks): Don't test for random and bcopy
3402 only when we're building with X; look for them all the time.
3404 1993-07-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3406 * configure.in: Test for availability of bcopy functions, searching
3407 the X libraries if we're using X.
3409 * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp,
3410 and #define HAVE_AIX_SMT_EXP if we do. This is present in some
3411 versions of AIX, and needs to be passed to the loader.
3413 * configure.in: Test for the availablility of the
3414 XScreenResourceString function.
3416 1993-07-30 David J. MacKenzie (djm@frob.eng.umd.edu)
3418 * configure.in: If we found X on our own, set C_SWITCH_X_SITE and
3419 LD_SWITCH_X_SITE and assume --with-x11.
3420 Only look for X11 files if we weren't told about a window system
3421 or if we were told to use X11 but not told where.
3422 Search the libraries from the s and/or m files when checking for
3425 * configure.in: Remove any trailing slashes in prefix and exec_prefix.
3427 1993-07-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3429 * make-dist: Include lisp/dired.todo in the distribution.
3431 1993-07-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3433 * configure.in: Add code to set HAVE_INET_SOCKETS.
3435 1993-07-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3437 * configure.in: If we do find x_includes and x_libraries
3438 via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE.
3440 1993-07-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3442 * make-dist: Include src/gnu-hp300 in the dist.
3444 * configure.in (canonical): New variable holds the canonicalized
3445 configuration. Don't alter `configuration'. Use `configuration'
3446 for Makefile.in for file naming.
3447 (testing x_includes and x_libraries): Use =, not ==.
3449 1993-07-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3451 * Version 19.17 released.
3453 * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src
3454 directory's makefile. This allows the invocation of CPP which
3455 builds xmakefile to receive these switches. The SunSoft C
3456 preprocessor inserts spaces between tokens if it doesn't get the
3457 -Xs flag requested in src/s/sol2.h.
3459 1993-07-12 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
3461 * configure.in (m68k-bull-sysv3): new config.
3463 1993-07-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3465 * configure.in: Use the autoconf AC_FIND_X macro to try to find
3466 the X Windows libraries.
3468 1993-07-07 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3470 * make-dist (tempdir): Don't create lisp/forms-mode directory in
3471 the distribution. Those files aren't kept in their own
3472 subdirectory any more.
3474 1993-07-06 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3476 * Version 19.16 released.
3478 1993-06-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3480 * configure.in: Add --verbose flag.
3482 1993-06-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3484 * version 19.15 released.
3486 1993-06-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3488 * Makefile.in (top_distclean): Use -f switch when cleaning out
3489 lock dir; it might be empty.
3491 * configure.in: Only check for -lXbsd once.
3493 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3495 * Version 19.14 released.
3497 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3499 * make-dist: If using gzip, create distribution with '.gz' extension.
3501 * make-dist (lisp/term): This doesn't have a ChangeLog anymore.
3502 (lisp/forms-mode): This doesn't exist anymore.
3504 * configure.in: Look for the closedir function.
3506 1993-06-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3508 * configure.in (CPP): Autoconf sets this to a shell variable
3509 reference, which doesn't work when it's edited into a makefile.
3510 Expand that variable reference.
3512 * Makefile.in (CPP): New variable.
3513 (src/Makefile): Edit CPP into src/Makefile.
3515 * Makefile.in (src/Makefile): Don't bother exiting single quotes
3516 and entering double quotes to get the values of LD_SWITCH_X_SITE
3517 and the other make variables; make substitutes them in anyway.
3519 * Makefile.in (uninstall): Don't remove the lisp and etc
3520 directories if they're in the source tree.
3522 Bring mumbleclean targets into conformance with GNU coding standards.
3523 * Makefile.in (mostlyclean, clean): Separate these two; just have
3524 them pass the request to the subdirectory makefiles.
3525 (distclean): Pass the request down, and then get rid of the
3526 files configure built, and get rid of the Makefiles.
3527 (realclean): Pass the request down, and then do the same things
3529 (uninstall, info, dvi): New targets.
3531 * configure.in: Move clause for PC-compatible i386 box to the end
3532 of the case statement, to avoid masking configurations below.
3534 * configure.in: Add case for m88k-motorola-sysv4.
3536 * configure.in: Add support for HP/UX versions 7, 8, and 9 on
3537 the HP 68000 machines.
3539 * configure.in: Put the arguments to LD_SWITCH_X_SITE's and
3540 C_SWITCH_X_SITE's -L and -I switches in quotes, so the
3541 preprocessor won't fiddle with them.
3543 1993-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3545 * Makefile.in (TAGS): cd to src to run etags.
3547 1993-06-12 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3549 * configure.in (version): Check the X libraries for XrmSetDatabase
3550 and random, and see if we have -lXbsd.
3552 1993-06-11 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3554 * configure.in: Pass "-Isrc" to the CPP we run to examine the
3555 s/*.h and m/*.h files. Martin Tomes
3556 <mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it.
3558 1993-06-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3560 * configure.in: Move i386-prime-sysv* and i386-sequent-bsd*
3561 above the general i386 alternative.
3563 1993-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3565 * configure.in: Recognize configuration name for Data General
3568 * configure.in: Use AC_LONG_FILE_NAMES.
3570 1993-06-09 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3572 * configure.in: Test for bison.
3573 * Makefile.in (YACC): New variable.
3574 (lib-src/Makefile.in): Edit YACC into the makefile.
3576 1993-06-08 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3578 * Version 19.13 released.
3580 * configure.in (CFLAGS): Don't set this according to the value of
3581 the GCC shell variable. Instead, consult the machine and system
3582 files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and
3583 test __GNUC__ while we're at it.
3585 * configure.in: Remove extra ;; from hpux cases.
3587 1993-06-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3589 * configure.in: Check to see if the system has -ldnet.
3591 1993-06-08 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3593 * make-dist: Add clauses to distribute lisp/forms-mode.
3595 1993-06-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3597 * configure.in (machine): Fix the versions in hpux version number test.
3598 Do not guess based on cpu type. Do check for explicit system version.
3600 1993-06-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3602 * configure.in: Do NOT look for `unknown' as company name.
3604 1993-06-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3606 * configure.in: Fix typo in message.
3608 1993-06-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3610 * Version 19.12 released.
3612 * Makefile.in (do-install): Correct previous etc-copying change.
3613 Partially rewrite using `if'.
3614 (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE.
3616 * Version 19.11 released.
3618 * configure.in: Handle 386bsd.
3620 1993-05-31 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3622 * make-dist: Update getdate.c.
3624 * configure.in: Handle bsd386.
3626 * Makefile.in (do-install): Use `-' in tar options.
3628 * configure.in: Change ! "${...}" to x"${...}" = x.
3630 * Makefile.in (do-install): Copy the DOC-* files from the build
3631 etc directory, as well as lots of things from ${srcdir}/etc.
3633 * make-dist: Copy config.guess.
3635 * configure.in: Handle AIX versions 1.2, 1.3.
3637 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3639 * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add
3640 the configuration name mips-mips-usg* to represent USG systems.
3642 * configure.in: Fix logic to detect if srcdir is already configured.
3644 * Makefile.in: Pass in LD_SWITCH_X_SITE.
3646 * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd
3647 foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name
3648 of a directory; cd might fail, and have pwd print out the current
3651 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3653 * configure.in: When looking for sources, use '.', not `.`. Also '..'.
3655 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3657 * configure.in: Complain if srcdir points at an already-configured
3660 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3662 * Version 19.10 released.
3664 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3666 * Makefile.in: Use Makefile comments, not C comments.
3668 * configure.in: Add case for the Tektronix XD88.
3670 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3672 * configure.in: Handle sysv4.2 and sysvr4.2.
3674 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3676 * configure.in: Traverse the argument list without destroying it;
3677 don't use shift. It turns out that "set - ${saved_arguments}"
3678 doesn't work portably.
3680 * configure.in: Add missing "fi".
3682 * make-dist: Rebuild configure if configure.in is newer.
3684 * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src
3685 targets to be executed even if make remembers that it has already
3688 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3690 * Makefile.in (do-install): Delete redundant code to copy etc twice.
3692 * configure.in (romp): Handle various version numbers with aos and bsd.
3694 1993-05-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3696 * configure.in: Fix message text.
3698 1993-05-28 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3700 * make-dist: Make a `site-lisp' directory in the distribution,
3701 instead of a `local-lisp' directory, which hasn't been the
3702 appropriate name for a long time.
3703 * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory
3704 from the distribution first, then /usr/local/lib/emacs/site-lisp.
3706 * Makefile.in (do-install): Correctly detect if ./etc and
3707 ${srcdir}/etc are the same.
3709 * configure.in: Extract UNEXEC from the system configuration
3710 files, compute the name of the source file corresponding to the
3711 object file, and #define it as UNEXEC_SRC in config.h.
3713 * configure.in: If srcdir is '.', then try using PWD to make it
3716 * configure.in: Include ${srcdir} in the printed report, to help
3717 people notice if it's an automounter path.
3719 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3721 * configure.in (prefix): Don't run pwd on srcdir unnecessarily.
3723 1993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3725 * Makefile.in (do-install): Delete the dest dir, not the source dir,
3726 when they are different. Add `shift' command.
3727 (COPYDESTS, COPYDIR): Delete external-lisp dir.
3728 (externallispdir): Var deleted.
3730 * configure.in: Delete spurious paren outputting short_usage.
3732 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3734 * Version 19.9 released.
3736 1993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3738 * Makefile.in (${SUBDIR}): Pass the value of the make variable to
3741 * make-dist: Check for .elc files with no corresponding .el file.
3743 * Makefile.in (mkdir): Make all the directories in locallisppath.
3745 * config.guess: New file.
3746 * configure.in: Use it, tentatively.
3747 * INSTNALL: Mention its usage.
3749 * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
3750 the former gives you the operating system rev directly. Use
3751 s/hpux.h if we don't recognize what we got.
3753 * Makefile.in (do-install): Don't remove a destination directory
3754 if it's the same as the source. If ${srcdir}/info == ${infodir},
3755 don't try to copy the info files.
3757 * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this
3758 doesn't work if you're not using a separate source directory.
3759 (do-install): Copy the build tree's etc directory only after
3760 making sure it's not also the source tree's etc directory.
3762 1993-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3764 * configure.in: Handle sunos4.1.3 specially.
3766 1993-05-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3768 * Makefile.in (INSTALL): Add definition.
3770 * configure.in: Fix some messages. Support -with-gnu-cc.
3771 At the end, use `set --', not `set -'.
3772 Delete spurious `.h' in hpux alternatives.
3774 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3776 * Version 19.8 released.
3778 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3780 * configure.in: When looking for source in the same directory as
3781 the configure script, make the path thus discovered absolute.
3782 If the user specifies the `--srcdir' switch, make that directory
3785 * Makefile.in (srcdir): Remove comment saying this doesn't work.
3787 * Makefile.in (src/paths.h): Edit the `infodir' variable into this
3788 too, as the value of the PATH_INFO macro.
3790 * configure.in: Check to see if the source lives in the same
3791 directory as the configure script.
3793 1993-05-24 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3795 * Makefile.in (install): Split this into `install' and
3796 `do-install', to give people more control over exactly what gets
3798 (do-install): New target, containing the guts of `install'. Don't
3799 remove and recreate the directories inside the copying loop - do
3800 it all before the copying loop. Pass more flags to the lib-src
3802 (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
3803 avoid errors and warnings.
3805 * configure.in: For generic IBM PC boxes, insist on "unknown" for
3806 the manufacturer - the more general case was blocking other i386
3807 configuration names below, and that's how the names are written in
3810 * make-dist: When breaking links, remove the link before moving
3811 the copy onto it, to avoid interactive behavior.
3813 * Makefile.in: Doc fix.
3815 * configure.in: Doc fix.
3817 * INSTALL: Mention --exec-prefix option.
3819 * configure.in: Add support for the `--exec-prefix' option.
3820 * Makefile.in: Accept that support.
3822 * configure.in: Use the AC_PROG_INSTALL macro.
3823 * Makefile.in (INSTALL): Variable removed.
3824 (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure.
3826 * configure.in: Distinguish between hp800's and hp700's by calling
3829 1993-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3831 * configure.in: Recognize configuration names for i860 boxes
3834 1993-05-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3836 * configure.in: Distinguish between hp800's and hp700's by the
3837 version of HP/UX they run, since that's something people are more
3838 likely to know - hp700's run 8.0.
3839 Add HP 700 configuration.
3841 * configure.in: Test for the presence of the `rename' function.
3843 * Makefile.in (C_SWITCH_X_SITE): New variable - get this from
3845 (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this.
3847 * make-dist: Break intra-tree links.
3849 * configure.in: Explain that this is an autoconf script, and give
3850 instructions for rebuilding configure from it. Arrange to put
3851 comments in configure explaining this too.
3853 * configure.in: Make the first line of the configure script be
3854 "#!/bin/sh". Leaving the first line blank didn't work.
3856 * configure.in (long_usage): Removed; made short_usage describe
3857 the options briefly.
3859 * configure.in: Implement the --prefix option.
3860 * Makefile.in (prefix): Add support for it here.
3861 * INSTALL: Document it here.
3863 * Makefile.in (install): Don't assume that the files in the `info'
3864 subdirectory match *.info. They don't have that prefix.
3866 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3868 * configure.in: Add case for version 5 of Esix.
3870 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3872 * Version 19.7 released.
3874 * make-dist: There aren't any *.com files in lib-src anymore.
3876 * make-dist: Copy texinfo.tex and texindex.c, rather than linking
3877 them; they're symlinks to other filesystems on the GNU machines.
3879 * make-dist: Check that the manual reflects the same version of
3880 Emacs as stated in lisp/version.el. Edit that version number into
3883 1993-05-21 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3885 * configure.in: Remove the hack of AC_DEFINE; use
3888 1993-05-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3890 * make-dist: Don't distribute precomp.com, compile.com, or
3891 link.com from ./src; they're in ./vms now.
3893 Some time-handling patches from Paul Eggert:
3894 * configure.in: Add AC_TIMEZONE.
3896 1993-05-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3898 * configure.in: Recognize Linux as a valid operating system for
3901 1993-05-18 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3903 * make-dist: Distribute some VMS files we got from Richard Levitte.
3905 * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as
3906 the source for the sed command, not oldXMenu/Makefile.
3908 1993-05-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3910 * INSTALL: Don't claim the srcdir option doesn't work.
3912 1993-05-16 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3914 * configure.in: Include remarks saying what order the autoconf
3915 tests should go in, and remind people to change config.h.in
3916 whenever they add autoconf tests which make #definitions.
3918 * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile.
3920 1993-05-15 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3922 * Makefile.in (oldXMenu/Makefile): Make this depend on
3923 ${srcdir}/oldXMenu/Makefile.in, not itself.
3925 * PROBLEMS: Some updates from David J. Mackenzie.
3927 More changes from David J. Mackenzie.
3928 * Makefile.in (install.sysv, install.xenix, install.aix): Targets
3929 removed; autoconf and config.h should specify all these
3931 (buildlisppath): Make this path depend on ${srcdir}.
3932 (INSTALLFLAGS): Removed.
3933 (INSTALL): Include the -c flag.
3934 (install): Change the way we invoke install accordingly.
3936 Install ${srcdir} changes from DJM.
3937 * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this
3939 (COPYDIR, COPYDESTS): Install files from both the etc directory in
3940 the source tree and the etc directory in the object tree.
3941 (${SUBDIR}): Pass the prefix variable down to submakes.
3942 (everywhere): Use `sed', not `/bin/sed'. Not all systems have sed
3944 (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in
3945 values for srcdir and VPATH.
3946 (install): Add `v' flag to tar command. Make sure that `dir'
3947 exists in ${srcdir}/info before copying it. Remember that the man
3948 pages come from the source tree, not the object tree.
3949 * configure.in: Remove remarks saying that the --srcdir option
3951 Create the etc directory in the object tree.
3952 Recognize configuration names of the form *-sun-solaris*.
3953 Recognize sunos5 and solaris as operating system names.
3955 * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for
3956 lib-src/getdate.y and src/systime.h.
3958 1993-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3960 * make-dist: Make links in info subdir.
3962 1993-05-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3964 * configure.in: Call AC_STDC_HEADERS.
3966 1993-05-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3968 * configure.in: Sidestep autoconf's quoting of the second argument
3969 of AC_DEFINE, so we can specify the value to put there. It would
3970 be nice if autoconf provided some way to specify computed values
3973 1993-05-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3975 * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
3976 this is always just -DHAVE_CONFIG_H.
3978 The GNU coding standards specify that CFLAGS should be left for
3980 * Makefile.in (CFLAGS): Let configure determine the default value
3982 have it default to DEFS.
3983 (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
3984 (lib-src/Makefile, src/Makefile): Edit the default value for
3985 CFLAGS into these files, not DEFS.
3986 * configure.in (CFLAGS): Choose a default value for this - "-g"
3987 normally, or "-g -O" if we're using GCC. Edit it into the
3990 * configure.in: When scanning the machine and system description
3991 #include files, write their names to conftest.c properly.
3993 1993-05-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3995 * configure.in: In configuration name case for Apallos running
3996 Domainios, set opsys, not opsysfile.
3998 * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce
3999 src/config.h, instead of AC_OUTPUT; the latter overwrites
4000 src/config.h even when it hasn't changed, puts a makefile-style
4001 comment at the top even though it's C code, and produces a
4002 config.status script which doesn't do the job right.
4004 * configure.in: Add AC_LN_S test, so we can tell whether or not we
4005 can use a symbolic link to get the X Menu library into src.
4006 * Makefile.in (LN_S): New variable.
4007 (src/Makefile): Edit the value of LN_S into this makefile.
4009 1993-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4011 * configure.in: Support *-sco3.2v4* as opsystem.
4013 * make-dist: Don't include calc directory.
4014 Exclude many files in the man directory; copy a few.
4016 1993-05-04 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4018 * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and
4019 call AC_STRUCT_TM to see what's in time.h.
4021 * configure.in: Employ quoting stupidity to get the value of CPP
4024 1993-04-27 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4026 * configure.in: Use the AC_PROG_CPP macro, and then use the CPP
4027 variable to scan the machine and system description files.
4029 * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h,
4030 so that getdate.y builds correctly.
4032 1993-04-26 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4034 * configure.in (tempcname): Change this to "conftest.c", so it will
4035 work properly on systems with short filenames; this is the name
4038 * configure.in: Also detect the availability of dup2 and
4041 * configure.in: Use the AC_ALLOCA test.
4042 * Makefile.in (ALLOCA): New variable, to be set by ./configure.
4043 (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
4045 1993-04-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4047 * make-dist: Distribute configure, as well as configure.in.
4050 1993-04-23 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4052 * Makefile.in (install): Print out the name of the directory we're
4053 copying, so people can have some idea of whether we're making
4056 * Makefile.in (install.aix, install.xenix, install.sysv, install):
4057 Don't forget to re-create the COPYDESTS directories after we clear
4060 1993-04-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4062 * Makefile.in: Add autoconf cookies so that the configure
4063 script can comment out sections of path variable definitions to
4064 choose between the installable configuration and the run-in-place
4066 * configure.in: Add new option `--run-in-place', to select the
4067 run-in-place path definitions.
4069 * configure.in: Add a clause to the big configuration name case
4070 for the NeXT machine.
4072 1993-04-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4074 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4075 Make sure that each source directory exists, and is different from
4076 the destination directory; then, delete the destination before
4077 copying over the source.
4079 * make-dist: Distribute configure.in, instead of configure.
4081 1993-04-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4083 * configure.in: Don't set CC to "gcc -O" if the user specifies
4084 `--with-gcc'. Add -O to DEFS if GCC is set.
4086 1993-04-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4088 * Makefile.in (clean mostlyclean): Missing right paren.
4090 * configure.in: When checking for X windows, search for an X11
4091 subdirectory of ${x_includes}.
4093 * configure.in: Check for gettimeofday function, for getdate.y.
4095 Change `configure' to a mixture of custom code and autoconf stuff.
4096 autoconf can't derive all the information we need, but we'd really
4097 like to be able to take advantage of some of its tests, and its
4098 file-editing facilities.
4099 * configure.in: Renamed from configure.
4100 Quote the sections of shell script we want copied literally to
4101 the configure script.
4102 (compile): Initialize this to make the autoconf macros' code happy.
4103 Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
4104 code to do their jobs.
4105 Use autoconf to produce Makefile and src/config.h.
4106 Remove the Makefile-style comment that autoconf places at the top
4108 (config_h_opts): Removed - no longer necessary.
4109 * Makefile.in (configname): Renamed to configuration.
4110 (CONFIG_CFLAGS): Renamed to DEFS.
4111 (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
4112 get values via autoload @cookies@.
4113 (libsrc_libs): Get this from autoconf. We used to do nothing
4115 (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
4117 * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
4118 echo the move-if-change command.
4120 1993-04-08 Jim Blandy (jimb@churchy.gnu.ai.mit.edu)
4122 * make-dist: Distribute lib-src/rcs-checkin.
4124 * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms.
4125 Don't try to make links to the RCS or Old subdirectories.
4126 Use the appropriate extension for the compression type in use.
4127 Create the tar file in the shell's initial default directory, not
4129 Erase the whole ${tempparent} tree, not just ${tempdir}.
4131 1993-03-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4133 * Makefile.in (src/paths.h): Don't echo the huge sed command we
4134 use to build paths.h.
4135 (lib-src/Makefile, src/Makefile): Similarly.
4137 * configure: Extend test for working `const' keyword to handle AIX
4140 1993-03-24 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4142 * make-dist: Distribute lisp/term/ChangeLog.
4144 Arrange for C compilation throughout the tree to get
4145 C_SWITCH_SYSTEM from the configuration files.
4146 * configure: Extract C_SWITCH_SYSTEM from the machine and
4147 system-dependent files, and save it in the top-level Makefile.
4148 * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit.
4149 (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile.
4151 * make-dist: Include the VMS support files in oldXMenu in the
4154 * configure: Doc fix.
4156 * configure: Fix corrupted config_h_opts.
4158 * configure: Properly report option names in error messages.
4160 * configure: Properly recognize --x-includes and --x-libraries
4163 * configure: Fix syntax errors in code handling XFree386.
4165 1993-03-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4167 * configure: Add special code to detect XFree386, and tell
4170 * configure: Properly handle extracting values of LIBS_MACHINE and
4171 LIBS_SYSTEM that contain spaces.
4173 * configure: Add `--x-includes' and `--x-libraries' options. I
4174 think these are dopey, but no less than three alpha testers, at
4175 large sites, have said they have their X files installed in odd
4176 places. Implement them by setting C_SWITCH_X_SITE and
4177 LD_SWITCH_X_SITE in src/config.h.
4179 1993-03-22 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4181 * make-dist: Don't distribute etc/Old files.
4183 * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their
4186 1993-03-20 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4188 * make-dist: Fix typo.
4190 1993-03-19 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4192 * make-dist: Corrected typo, fixed it to discard = and TAGS files
4193 in some cases where it should but didn't seen to.
4195 * Makefile.in: Added unlock and relock productions.
4197 1993-03-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4199 * make-dist: Add a --compress option to force make-dist to use
4202 * make-dist: Use gzip, if we can find it.
4204 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4205 make rs6000-ibm-aix default to -aix32.
4207 1993-03-17 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4209 * Makefile.in: Added `Developer's configuration' section.
4211 1993-03-17 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4213 * Makefile.in: Add commented-out variable settings for developer's
4216 1993-03-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4218 * make-dist: Distribute `src/bitmaps' too.
4220 1993-03-14 Charles Hannum (mycroft@hal.gnu.ai.mit.edu)
4222 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4223 make rs6000-ibm-aix default to -aix32.
4225 1993-03-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4227 * configure: Recognize strings like "sysvr0" or "sysvr1" as System V.
4229 * Makefile.in (install.sysv): Add a second `$' in front of
4230 `${dest}', so that the shell will expand it, instead of Make.
4232 * configure: When processing the name of the configure script,
4233 collapse `././' to `./', but leave a single `./' prefix alone.
4235 * configure: Doc fix.
4237 1993-03-04 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4239 * configure: Handle isc3.0 correctly.
4241 1993-02-25 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4243 * make-dist: Don't try to copy the COPYING notice into
4244 external-lisp; we're not distributing that directory any more.
4246 1993-02-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4248 * Makefile.in (install, install.aix, install.xenix, install.sysv):
4249 Remove CVS subdirectories from the installed directory trees, as
4250 well as RCS directories.
4252 1993-02-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4254 * make-dist: Only copy gmalloc.c if we couldn't link it.
4255 Don't try to copy man/{README,Makefile} unless they actually exist.
4257 * Makefile.in (lisppath): Don't include externallispdir in this.
4258 We're not sure whether we're even going to distribute the
4261 1993-02-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4263 * make-dist: Don't distribute the external-lisp directory anymore.
4264 * INSTALL: Remove all references to external-lisp.
4266 * configure: Detect whether the compiler supports `const'
4267 properly, and edit src/config.h accordingly.
4269 * configure: Tweak layout of final report.
4271 * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not
4274 * Makefile.in (locallisppath): Make this default to
4275 ${datadir}/emacs/site-lisp, instead of
4276 ${datadir}/emacs/local-lisp. ${datadir} and ${statedir} are often
4277 the same thing, and local-lisp causes completion conflicts with
4279 (lisppath): Add ${externallispdir} to this.
4280 * INSTALL: Adjust installation directions.
4282 * Makefile.in (externallispdir): New variable, to say where to
4283 install the externally-maintained lisp files.
4284 (COPYDIR, COPYDESTS): Copy the external lisp directory just like
4286 * INSTALL: Describe external-lisp and the new externallispdir
4289 1993-02-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4291 * configure (progname): New option `--with-gcc'. Make it clearer
4292 how we are trying to guess whether or not we have GCC.
4293 * INSTALL: Document the `--with-gcc' option, and improve
4294 description of `--with-x' options.
4296 1993-02-06 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4298 * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and
4299 ${infodir} from these variables; we have written out explicit code
4300 to install the info files.
4302 1993-01-25 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4304 * make-dist: Don't distributed the RCS files in the etc directory.
4306 1993-01-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4308 * Makefile.in: Some makes can't handle comments in the middle of
4309 commands; move them to before the whole rule.
4311 1993-01-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4313 * README: Mention what Emacs is.
4315 1993-01-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4317 * make-dist: Include `./lisp/calc-2.02' in the distribution.
4318 Add `./cpp' and `./man' back into the distribution.
4320 1993-01-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4322 * Makefile.in: Define MAKE, and use where appropriate.
4324 1993-01-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4326 * make-dist: Remember that the authoritative COPYING notice is
4327 `etc/COPYING', not `../etc/COPYING'.
4329 1992-12-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4331 * make-dist: Make sure that the COPYING notices in each directory
4332 are copies, not symlinks.
4334 1992-12-19 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4336 * INSTALL: The build process produces an executable called `emacs'
4337 now. Change references.
4338 * Makefile.in: Adjust `install.mumble' targets to install
4339 `src/emacs', not `src/xemacs'.
4341 * configure: Start with a blank line; this keeps some old CSH's
4342 from thinking it's a CSH script. Most systems will just use
4343 /bin/sh to run it, which is what we're expecting; the only other
4344 shells which might try to interpret it themselves are probably
4347 1992-12-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4349 * INSTALL: Improvements suggested by David Mackenzie.
4351 1992-12-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4353 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4354 Don't try to copy the info files if there aren't any; the
4355 unexpanded globbing pattern disappoints `install'. Ignore the
4356 return status of that command.
4358 * INSTALL: Updated for new configuration arrangement.
4360 * configure: Don't make the top-level Makefile read-only - people
4361 may want to edit the values of the path variables.
4363 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4364 Install the info files in ${infodir}. Install the executable
4365 under both `emacs' and `emacs-VERSION'.
4367 * Makefile.in: Doc fix.
4369 * Makefile.in (exec_prefix): New variable, as per latest version
4370 of coding standards.
4371 (bindir, libdir): Use it, instead of `prefix'.
4372 (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
4374 * Makefile.in (mandir): Make the default value for this depend on
4377 * Makefile.in (datadir, statedir, libdir): Make these all default
4379 (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
4382 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4383 Install the etags and ctags man pages too.
4385 * Makefile.in (distclean): Don't delete backup files; that's the
4387 (extraclean): Like distclean, but deletes backup and autosave files.
4389 1992-12-10 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4391 Make path specification conform to GNU coding standards.
4392 * configure (long_usage): Remove all traces of old arguments from
4393 usage messages, and document the options we do accept in more
4394 detail: -with-x... and --srcdir.
4395 (options, boolean_opts): Deleted; we don't have enough options to
4396 make this worthwhile.
4397 (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
4398 along with the code which supported them; these should be set as
4399 arguments to the top-level make.
4400 (config_h_opts): Since this no longer doubles as a list of option
4401 names, make them upper case; this simplifies the code which uses
4402 them to build the sed command to edit src/config.h. Change the
4403 code which sets them.
4404 (cc, g, O): Don't allow the user to set these using options; they
4405 should be specified using `CC=' and `CFLAGS=' arguments to the
4406 top-level make. Just choose reasonable default values for them,
4407 and edit them into Makefile.in's default CC and CONFIG_CFLAGS
4409 (gnu_malloc, rel_alloc): Don't allow the user to set these using
4410 options; use them whenever the configuration files say they're
4412 Simplify the argument processing loop. Don't accept abbreviations
4413 for option names; these might conflict with other configuration
4414 options in the future.
4415 Add some support for the `--srcdir' option. Check for the sources
4416 in . and .. if `--srcdir' is omitted. If the directories we will
4417 compile in don't exist yet, create them under the current directory.
4418 Note that the rest of the build process doesn't really support
4420 Edit only the top Makefile. That should edit the others. Edit
4421 into the makefile: `version', from lisp/version.el, `configname'
4422 and `srcdir' from the configuration arguments, `CC' and
4423 `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
4424 the user's path, and LOADLIBES as gleaned from the system
4426 Simplify the report generated; it doesn't need to include any
4427 description of paths now.
4428 Make `config.status' exec configure instead of just calling it, so
4429 there's no harm in overwriting `config.status'.
4430 * Makefile.in (version, configname): New variables, used to choose
4431 the default values for datadir and libdir.
4432 Path variables rearranged into two clearer groups:
4433 - In the first group are the variables specified by the GNU coding
4434 standards (prefix, bindir, datadir, statedir, libdir, mandir,
4435 manext, infodir, and srcdir).
4436 - In the second are the variables actually used for Emacs's paths
4437 (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
4438 archlibdir), which depend on the first category.
4439 datadir and libdir default to directories under
4440 ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
4442 etcdir and lispdir default to subdirectories of datadir.
4443 archlibdir defaults to libdir.
4444 The new installation tree is a bit deeper than it used to be, so
4445 use the new make-path program in lib-src to build them all.
4446 Always build a new src/paths.h.tmp and then move-if-change it to
4447 src/paths.h, to avoid unnecessary rebuilds while responding to the
4449 Remove all mention of arch-lib. Run utility commands from
4450 lib-src, and let the executables be copied into archlibdir when
4452 Add targets for src/Makefile, lib-src/Makefile, and
4453 oldXMenu/Makefile, editing the values of the path variables into
4455 Let lib-src do its own installation.
4456 (datadir): Default to putting data files under
4457 ${prefix}/lib/emacs/${version}, not /usr/local/emacs.
4458 (emacsdir): Variable deleted; it would only be confusing to use.
4459 (lispdir, etcdir): Default to ${datadir}/lisp.
4460 (mkdir): Use make-path for this.
4461 (lockdir): Do this in mkdir.
4462 (Makefile): New target.
4464 * configure (usage_message): Rename to long_usage.
4466 * make-dist: Don't bother creating an arch-lib directory; that's
4467 only for installation now.
4469 1992-11-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4471 * configure: Use GCC-style configuration names, using config.sub.
4472 Change the usage and help messages.
4474 * configure: Initialize window_system, not indow_system.
4476 * configure: Report which window system, compiler, and signal
4477 handler return type we decide to use.
4479 * make-dist: Explain what's going on if config.sub and gmalloc.c
4480 can't be linked. Place the code which copies them near the code
4481 which links the rest of the files around them.
4483 1992-11-15 Jim Blandy (jimb@apple-gunkies.gnu.ai.mit.edu)
4485 * make-dist: Don't bother to distribute src/*.com, or
4486 src/vmsbuild; those have all been moved to `../vms'.
4488 1992-11-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4490 * make-dist: Don't forget that the way to avoid filenames starting
4491 with `=' is to use the pattern `[a-zA-Z0-9]*.h', not
4492 `[a-zA-Z0-9].h'. Add a new section for dealing with files that we
4493 couldn't make hard links to, since we have two already, and
4494 perhaps more to come.
4496 1992-11-04 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4498 * configure: When editing parameters into lib-src/Makefile, change
4499 the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS
4500 needs some other flags too.
4502 1992-11-03 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4504 * configure: Remove spurious echo of the configuration name.
4506 * make-dist: Don't distribute files in src/m and src/s whose names
4509 1992-10-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4511 * configure: Update GNU_MALLOC and REL_ALLOC in config.h.
4512 Also LISP_FLOAT_TYPE.
4514 1992-10-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4516 * make-dist: Copy config.sub, since it's a symbolic link to a file
4517 on another file system.
4519 1992-10-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4521 * make-dist: Include lib-src/makedoc.com and emacs.csh in the
4524 * config.sub: New file, to help us recognize configuration names.
4525 * make-dist: Include it in the distribution.
4527 1992-09-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4529 * configure: Convert `-' to `_' in specified option names.
4530 Accept options with --. Delete --highpri and --have-x-menu options.
4531 New options --with-x and --with-x10 replace -window-system.
4532 Don't mention options --gnu-malloc, --rel-alloc
4533 or --lisp-float-type in help message.
4535 1992-09-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4537 * make-dist: Include the `vms' subdirectory in the distribution.
4539 1992-09-10 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4541 * configure: Remove lines starting with "# DIST: " when building
4542 lib-src/Makefile and src/Makefile. This allows us to mark the
4543 "Makefile.in" files with explanatory comments which won't also get
4544 stuck in the Makefiles.
4546 1992-09-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4548 * make-dist: Don't use the '+' operator in the sed regular
4549 expression that extracts the version number from lisp/version.el;
4550 Ultrix sed doesn't seem support the operator. Just double the
4553 1992-09-01 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4555 * Makefile.in: Doc fix.
4557 1992-08-31 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4559 * configure: Rewrite sed command to remove at most one ./ prefix;
4560 Ultrix's sed doesn't allow us to apply the * operator to a \( \)
4563 1992-08-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4565 * Makefile.in (src/paths.h): Use sed, not /bin/sed.
4567 1992-08-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4569 * make-dist: Go ahead and build a new TAGS file, unless the
4570 --newer option was specified. Don't try to delete a TAGS file
4571 from etc; it's not kept there, and shouldn't be deleted anyway.
4573 1992-08-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4575 * make-dist: If the lisp directory contains a default.el, don't
4578 * configure: When searching signal.h for the type of a signal
4579 return handler, make a copy of it, not a symbolic link to it; that
4580 way, it will work on systems that don't have symbolic links.
4582 1992-08-14 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4584 * make-dist: taught it about vcdiff and rcs2log, added --newer
4585 option for generating incremental distributions. Stopped it from
4586 generating a TAGS file into the distribution; that sucker is
4587 *big*, and easily enough generated with the toplevel makefile.
4589 1992-08-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4591 * configure: When writing config.status, don't prefix progname
4592 with a '.'; it might be absolute.
4594 1992-08-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4596 * configure: Choose to use X11 if either /usr/lib/libX11.a or
4597 /usr/include/X11 exist, not only if both exist.
4599 1992-07-27 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4601 * make-dist: Make the new external-lisp directory a duplicate of
4602 the external-lisp directory, not the lisp directory.
4604 1992-07-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4606 * Makefile.in (clean, mostlyclean): Don't bother trying to `make
4607 clean' in arch-lib; it doesn't even have a Makefile.
4609 * Makefile.in (clean, mostlyclean): In the test which tries to
4610 distinguish between the build directory, which should be cleaned,
4611 and the installed directory, which shouldn't, cd to `${emacsdir}',
4612 not `${DESTDIR}${LIBDIR}'.
4614 1992-06-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4616 * make-dist: Be sure to delete the .c and .h files that YACC and
4617 BISON create from getdate.y.
4619 * external-lisp: New directory; see `external-lisp/README'.
4620 * make-dist: Added support for the external-lisp subdirectory.
4622 * make-dist: Changed message which complains that make-dist wasn't
4623 invoked in the right directory to indicate which files it was
4626 1992-06-29 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4628 * configure: Add comments explaining why we can't translate
4629 character ranges or control characters in `tr'.
4631 1992-06-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4633 * configure: When generating the configuration message, we used to
4634 build the message from the start so that each line began with "# "
4635 so that it would be a comment in `config.status'. However, this
4636 causes trouble if any of the variables we use in the message
4637 expand to more than one line of text - as gnu_malloc_reason
4638 sometimes does. So instead, we build the message as it should be
4639 printed to the user (i.e. without the "# " prefixes), and stick on
4640 the "# "s when we write it to `config.status'.
4642 * Makefile.in (clean, mostlyclean): Don't neglect to clean out
4643 `lib-src' and `arch-lib'.
4645 * configure: When generating report and `config.status' file, note
4646 that bindir only determines where `make install' and
4647 `build-install' will place the executables; this should make it
4648 clear that the ordinary build process will not try to install
4651 1992-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4653 * make-dist: Change messages to say that we are 'making links to
4654 X', rather than 'copying X'. And put `' quotes around file names.
4656 * make-dist: Include '.tmp' in the name of the staging directory.
4658 * make-dist: Pass the `-f' option to rm when you're not sure that
4659 the files you're removing actually exist.
4661 * make-dist: When setting up etc/COPYING, always nuke whatever is
4662 there, and then copy it in, to make sure we get a real file.
4664 * make-dist: Don't try to distribute *.defns files any more. The
4665 only such file was for simula.el, which has been superceded by a
4666 version which doesn't have a separate .defns file.
4668 1992-05-28 Ken Raeburn (Raeburn@Cygnus.COM)
4670 * make-dist: Don't distribute configured versions of config.h.in,
4671 paths.h.in, Makefile.in in src.
4673 * configure: Delete .tmp files before creating them; don't bother
4674 trying to make final targets writeable first, since it won't
4675 matter to move-if-change.
4677 1992-05-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4679 * Makefile.in (mkdir, lockdir): Don't put dashes in front of the
4680 mkdir and chmod in the center of all the conditionals. GNU Make
4681 will strip these out, but other makes won't.
4683 1992-05-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4685 * make-dist: Include move-if-change in list of files to distribute.
4687 1992-05-04 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4689 * configure: Remove any "." elements from the program name.
4691 * configure: Don't record the values of all the possible arguments
4692 in config.status; only record the options that the user specified.
4694 * configure: Use move-if-change to move in the new src/config.h.
4696 1992-04-29 Ken Raeburn (Raeburn@Cygnus.COM)
4698 * move-if-change: New file, copied from gcc release.
4699 * Makefile.in (src/paths.h): Use it, and put the "sed" output into
4700 a temp file, so we don't update paths.h if an error occurs or if
4701 it doesn't need changing.
4703 1992-04-28 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4705 * Makefile.in (src/paths.h): Do not install a value for the
4706 PATH_SUPERLOCK value; that macro doesn't exist anymore.
4707 * build-install.in: Same thing.
4709 1992-04-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4711 * make-dist: Check the flag called "make_tar", not "make_dir"; the
4712 latter, being a typo, is always false, resulting in a program
4713 whose default behaviour is to painstakingly build a copy of the
4714 source tree, and then delete it. Rah.
4716 * Makefile.in: Add dist target, and comment for it.
4718 * configure: When scanning <signal.h> for a declaration for
4719 signal, create a symbolic link with a name ending in .c, so the
4720 compiler won't complain that it's only been given .h files.
4722 * configure: Check whether there are any arguments available
4723 before shifting to get the value of a non-boolean parameter.
4725 * make-dist: Doc fix.
4727 1992-04-20 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4729 * configure: Instead of grepping /usr/include/signal.h for a
4730 signal declaration, run /usr/include/signal.h or
4731 /usr/include/sys/signal.h through cpp and grep for the
4734 * configure: Redirect the output of grep to /dev/null instead of
4735 using grep -s - that flag means different things on other systems.
4737 * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath',
4738 since the former is recognizable even if you don't know what
4740 * configure: Accomodate that change.
4742 * configure: Accept options for all of the directories you can
4743 change in the Makefile.
4745 * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE".
4747 * INSTALL: Mention that you have to copy all the 'FOO.in' files to
4748 FOO before you can use them.
4750 * build-install.in: Made the "Where To Install Things" section
4751 conform with the similar section from Makefile.in. Copied section
4752 which builds src/paths.h from src/paths.h.in from the Makefile.
4754 1992-04-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4756 * configure: Write config.status to pass its command-line
4757 arguments on to configure, so that people can use it to recreate
4758 an old configuration, with minor changes.
4760 1992-04-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4762 * configure: Don't rely on option variables being unset if their
4763 values are the empty string. In particular, when producing the
4764 English report, don't assume that highpri will be unset when no
4765 increased priority has been requested; -highpri='' should be the
4766 same as omitting -highpri altogether.
4768 * configure: Fix dumb bug: when running the system and machine
4769 description files through cpp, mark those lines that we want to
4770 evaluate with the string '@configure@', and then only evaluate
4771 them. This way if the files include anything that actually
4772 generates text (type definitions or external declarations, say),
4773 we won't try to eval it.
4775 1992-04-11 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4777 * make-dist: New shell script.
4779 * configure: When creating foo from foo.in, make foo read-only to
4780 remind people to edit the .in file instead.
4782 * INSTALL: Changed references to config.h-dist to config.h.in.
4783 The "BUILDING GNU EMACS BY HAND" section neglected to mention how
4784 to build src/paths.h from src/paths.h.in; added a paragraph to do
4786 * configure, Makefile, build-install: Changed filenames like
4789 1992-04-08 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4791 * Makefile, build-install: Renamed to Makefile.in and
4792 build-install.in; the configure script will edit these to produce
4793 the usable Makefile and build-install.
4794 * configure: Changed to produce ./Makefile, ./build-install,
4795 lib-src/Makefile, and src/Makefile from their *.in counterparts,
4796 instead of editing them in place.
4798 1992-04-07 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4800 * Makefile: Re-arranged so that the undumped Emacs will search
4801 ../lisp *after* the site's local elisp files.
4802 (locallisppath, dumplisppath): New variables.
4803 (lisppath): This variable's default value is now chosen based on
4804 $(locallisppath) and $(lispdir); while it used to be the
4805 customization point for adding site-local elisp directories to
4806 load-path, that job is now handled mostly by locallisppath.
4807 (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH.
4808 Check the values being assigned to the *LOADSEARCH macros for null
4809 path elements (like '::' in 'foo::bar').
4811 * configure: When checking if the machine- and system-dependent
4812 files define a particular macro or not, actually run them through
4813 CPP and test the macros with #ifs, instead of just grepping for
4814 the macros' names. In particular, check for SYSTEM_MALLOC in this
4817 1992-04-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4819 * Makefile (install): Don't use -s in install. (Keep the symbols.)
4821 1992-04-02 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4823 * configure: Make the config.status file an executable shell
4824 script which will recreate the same configuration. Include the
4825 verbal description of the current configuration as a comment in
4829 * Makefile: brought the Makefile up to the GNU coding
4830 standards, as described in standards.text:
4831 (TAGS): New name for the target which rebuilds the tags table.
4832 (check): New target; doesn't do anything yet.
4833 (mostlyclean): New target, synonymous with clean.
4834 (realclean): New target. Currently, this just calls the
4835 subdirectories's makefiles and then deletes config.status.
4836 (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
4838 Installation directory variables changed to conform.
4839 (install, install.sysv, install.xenix, install.aix): Changed the
4840 code which copies the directories into their installed location to
4841 allow the installed locations to be in several different
4842 directories; the old version assumed that they would all be in
4844 (mkdir, lockdir): Allow the installed locations to be in several
4845 different directories.
4848 * build-install: Use the same variable names as the Makefile.
4849 Allow the installed locations to be in several different
4852 1992-03-31 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4854 * Makefile (src/paths.h): Instead of using a single sed command to
4855 edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two
4856 separately, and don't forget to append "/!!!SuperLock!!!" to the
4857 value of the PATH_SUPERLOCK macro.
4859 * config.emacs: Renamed to configure, for consistency with other
4860 GNU products. Internal references changed.
4861 INSTALL, Makefile: References changed.
4863 * lock: New directory, which should always be empty. If this
4864 directory doesn't exist, Emacs won't complain; it just won't lock.
4865 Having this here means that people can just unpack Emacs, build
4866 it, and have locking work.
4868 * share-lib: Re-renamed to etc, for the sake of tradition.
4869 * config.emacs: Changed default value for datadir to ../etc.
4870 * INSTALL, README: Adjusted.
4872 1992-03-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4874 * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile
4875 by running CPP on the appropriate s/*.h and m/*.h files.
4877 1992-03-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4879 * config.emacs: Make sure to set the "exit on error" flag once
4880 we've removed config.status; errors should abort the configuration.
4882 1992-02-15 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4884 * config.emacs: Added -distribute option, so that the Makefile
4885 paths are in their proper form. I don't know why this matters.
4887 1992-02-14 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4889 * local-lisp: New directory, empty in the distribution, for people
4890 to put local elisp code in.
4891 * config.emacs: Include it in the default load path.
4892 * README: Document it.
4894 1992-01-30 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4896 * config.emacs: Guess the type of signal handling functions based
4897 on the contents of /usr/include/signal.h.
4899 * config.emacs: Print out progress report messages.
4901 * Makefile (src/paths.h): Don't generically replace
4902 /usr/local/lib/emacs with LIBROOT. This can hide bugs in the
4903 editing of the other entries, and each entry should be dealt with
4906 * build-install: Converted from C-shell to Bourne shell.
4907 * config.emacs: Edit build-install properly.
4909 * config.emacs: Doc fix.
4911 1992-01-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4913 * Makefile (install): Remove `B' from tar xf command.
4915 1992-01-13 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4917 * config.emacs: Removed support for the `maintain-environment'
4918 option; the only important difference between this and its absence
4920 * INSTALL: Removed mention of `maintain-environment'.
4922 * config.emacs: Fix arguments to sed when processing boolean
4925 1991-12-05 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
4927 * config.emacs: New file, to help automate the installation
4930 * Makefile: Lots of changes to support the separation of etc into
4931 architecture-dependent and -independent files:
4932 (EMACSROOT): New variable, giving the directory under which all of
4933 Emacs's libraries should be installed. Changed rest of file to
4935 (LIBDIR): Now denotes only architecture-dependent dir - relevant cha
4936 (DATADIR): New variable, denoting architecture-independent dir.
4937 (LOCKDIR): New variable, for completeness.
4938 (SUBDIR): No more etc, new lib-src.
4939 (COPYDIR): No more etc, new arch-lib and share-lib.
4940 (src/paths.h): Set PATH_DATA and the LOCK macros too.
4941 (src): Now depends on lib-src, not etc.
4942 * build-install: Changes parallel to the above.
4943 * README: Describe the new arrangement.
4945 * vms: New subdirectory for all the VMS stuff.
4947 1991-12-03 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
4949 * Makefile (LISPPATH): New variable.
4950 (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH.
4952 1990-09-28 Richard Stallman (rms at mole.ai.mit.edu)
4954 * Makefile (install, install.sysv, install.xenix):
4955 Install wakeup instead of loadst. No need for setuid or setgid.
4957 1990-08-07 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4959 * Makefile (clean): Clean etc if that's not the installation dir.
4961 1990-04-26 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4963 * Makefile (paths.h): Make sed alter each name in the path.
4965 1988-08-30 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4967 * Makefile (install.sysv): Use cpio, not tar.
4969 1988-08-03 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4971 * Makefile (lockdir): Rename `lock' target.
4972 Depend on it from install*, not from `all'.
4974 1988-05-16 Richard Stallman (rms at frosted-flakes.ai.mit.edu)
4976 * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin}
4977 to match build-install and paths.h.
4980 ;; coding: iso-2022-7bit-unix