code.delx.au - gnu-emacs/blob - src/s/dgux.h

   1 /* Definitions file for GNU Emacs running on Data General's DG/UX
   2    version 4.32 and above.
   3    Copyright (C) 1985, 1986, 1991 Free Software Foundation, Inc.
   4
   5 This file is part of GNU Emacs.
   6
   7 GNU Emacs is free software; you can redistribute it and/or modify
   8 it under the terms of the GNU General Public License as published by
   9 the Free Software Foundation; either version 1, or (at your option)
  10 any later version.
  11
  12 GNU Emacs is distributed in the hope that it will be useful,
  13 but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 GNU General Public License for more details.
  16
  17 You should have received a copy of the GNU General Public License
  18 along with GNU Emacs; see the file COPYING.  If not, write to
  19 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
  20
  21
  22 /*
  23  *      Define symbols to identify the version of Unix this is.
  24  *      Define all the symbols that apply correctly.
  25  */
  26
  27 /* #define UNIPLUS */
  28 /* #define USG5 */
  29 /* #define USG */
  30 /* #define HPUX */
  31 /* #define UMAX */
  32 /* #define BSD4_1 */
  33 #define BSD4_2
  34 #define BSD4_3
  35 #define BSD
  36 /* #define VMS */
  37
  38 /* SYSTEM_TYPE should indicate the kind of system you are using.
  39  It sets the Lisp variable system-type.  */
  40
  41 #define SYSTEM_TYPE "berkeley-unix"
  42
  43 /* NOMULTIPLEJOBS should be defined if your system's shell
  44  does not have "job control" (the ability to stop a program,
  45  run some other program, then continue the first one).  */
  46
  47 /* #define NOMULTIPLEJOBS */
  48
  49 /* Emacs can read input using SIGIO and buffering characters itself,
  50    or using CBREAK mode and making C-g cause SIGINT.
  51    The choice is controlled by the variable interrupt_input.
  52    Define INTERRUPT_INPUT to make interrupt_input = 1 the default (use SIGIO)
  53
  54    SIGIO can be used only on systems that implement it (4.2 and 4.3).
  55    CBREAK mode has two disadvatages
  56      1) At least in 4.2, it is impossible to handle the Meta key properly.
  57         I hear that in system V this problem does not exist.
  58      2) Control-G causes output to be discarded.
  59         I do not know whether this can be fixed in system V.
  60
  61    Another method of doing input is planned but not implemented.
  62    It would have Emacs fork off a separate process
  63    to read the input and send it to the true Emacs process
  64    through a pipe.
  65 */
  66
  67 #define INTERRUPT_INPUT
  68
  69 /* Letter to use in finding device name of first pty,
  70   if system supports pty's.  'a' means it is /dev/ptya0  */
  71
  72 #define FIRST_PTY_LETTER 'r'
  73
  74 /*
  75  *      Define HAVE_TIMEVAL if the system supports the BSD style clock values.
  76  *      Look in <sys/time.h> for a timeval structure.
  77  */
  78
  79 #define HAVE_TIMEVAL
  80
  81 /*
  82  *      Define HAVE_SELECT if the system supports the `select' system call.
  83  */
  84
  85 #define HAVE_SELECT
  86
  87 /*
  88  *      Define HAVE_SOCKETS if the system supports sockets.
  89  */
  90
  91 #define HAVE_SOCKETS
  92
  93 /*
  94  *      Define HAVE_PTYS if the system supports pty devices.
  95  */
  96
  97 #define HAVE_PTYS
  98
  99 /*
 100  *      Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate
 101  *      The 4.2 opendir, etc., library functions.
 102  */
 103
 104 /* #define NONSYSTEM_DIR_LIBRARY */
 105
 106 /* Define this symbol if your system has the functions bcopy, etc. */
 107
 108 #define BSTRING
 109
 110 /* subprocesses should be defined if you want to
 111    have code for asynchronous subprocesses
 112    (as used in M-x compile and M-x shell).
 113    This is generally OS dependent, and not supported
 114    under most USG systems. */
 115
 116 #define subprocesses
 117
 118 /* If your system uses COFF (Common Object File Format) then define the
 119    preprocessor symbol "COFF".
 120
 121    DGUX can use either COFF or ELF.  To use ELF format, define ELF.  */
 122
 123 #ifndef ELF
 124 #define COFF
 125 #endif
 126
 127 #ifndef COFF /* People will probably find this apparently unreliable
 128                 till the NFS dumping bug is fixed.  */
 129
 130 /* It is possible to undump to ELF with DG/UX 5.4, but for revisions below
 131    5.4.1 the undump MUST be done on a local file system, or the kernel will
 132    panic.  ELF executables have the advantage of using shared libraries,
 133    while COFF executables will still work on 4.2x systems. */
 134
 135 #define UNEXEC unexelf.o
 136
 137 /* This makes sure that all segments in the executable are undumped,
 138    not just text, data, and bss.  In the case of Mxdb and shared
 139    libraries, additional information is stored in other sections.
 140    It does not hurt to have this defined if you don't use Mxdb or
 141    shared libraries.  In fact, it makes no difference. */
 142
 143 /* Necessary for shared libraries and Mxdb debugging information. */
 144 #define USG_SHARED_LIBRARIES
 145 #endif
 146
 147 /* define MAIL_USE_FLOCK if the mailer uses flock
 148    to interlock access to /usr/spool/mail/$USER.
 149    The alternative is that a lock file named
 150    /usr/spool/mail/$USER.lock.  */
 151
 152 /* #define MAIL_USE_FLOCK */
 153
 154 /* Define CLASH_DETECTION if you want lock files to be written
 155    so that Emacs can tell instantly when you try to modify
 156    a file that someone else has modified in his Emacs.  */
 157
 158 /* #define CLASH_DETECTION */
 159
 160 /* Define a replacement for the baud rate switch, since DG/UX uses a different
 161    from BSD.  */
 162
 163 #define BAUD_CONVERT    { 0, 110, 134, 150, 300, 600, 1200, 1800, 2400, \
 164                           4800, 9600, 19200, 38400 }
 165
 166 /*
 167  *      Define HAVE_GETTIMEOFDAY if gettimeofday() system call is available.
 168  */
 169
 170 #define HAVE_GETTIMEOFDAY
 171
 172 /*
 173  *      Define NLIST_STRUCT if the system has nlist.h
 174  */
 175
 176 #define NLIST_STRUCT
 177
 178 /*
 179  *      Make WM Interface Compliant.
 180  */
 181
 182 #define XICCC
 183
 184 /* Here, on a separate page, add any special hacks needed
 185    to make Emacs work on this system.  For example,
 186    you might define certain system call names that don't
 187    exist on your system, or that do different things on
 188    your system and must be used only through an encapsulation
 189    (Which you should place, by convention, in sysdep.c).  */
 190 \f
 191 /* Some compilers tend to put everything declared static
 192    into the initialized data area, which becomes pure after dumping Emacs.
 193    On these systems, you must #define static as nothing to foil this.
 194    Note that emacs carefully avoids static vars inside functions.  */
 195
 196 /* #define static */
 197
 198 /* DG/UX SPECIFIC ADDITIONS TO TEMPLATE FOLLOW: */
 199
 200 /* Use the Berkeley flavors of the library routines, instead of System V.  */
 201
 202 #define setpgrp(pid,pgrp) setpgrp2(pid,pgrp)
 203 #define getpgrp(pid) getpgrp2(pid)
 204
 205 /* Act like Berkeley. */
 206
 207 #define _setjmp(env) sigsetjmp(env,0)
 208 #define _longjmp(env,val) longjmp(env,val)
 209
 210 /* Use TERMINFO instead of termcap */
 211
 212 #define TERMINFO
 213
 214 /*
 215  *      Define HAVE_TERMIO if the system provides sysV-style ioctls
 216  *      for terminal control.
 217  *      DG/UX has both BSD and AT&T style ioctl's.  Bsd ioctl's don't
 218  *      seem to wait for the output to drain properly, so use System V.
 219  */
 220
 221 /* #define HAVE_TERMIO */
 222
 223 /*
 224  *      DG/UX 4.10 needs the following to turn on berkeley ioctl's.
 225  */
 226
 227 #ifndef HAVE_TERMIO
 228 #ifndef _BSD_TTY_FLAVOR         /* Already defined, in dgux 4.30.  */
 229 #define _BSD_TTY_FLAVOR
 230 #endif
 231 #endif
 232
 233 /*
 234  *      Use a Berkeley style sys/wait.h.
 235  *      This makes WIF* macros operate on structures instead of ints.
 236  */
 237
 238 #define _BSD_WAIT_FLAVOR
 239
 240 /* Enable the x-rebind keysym function.  Do not try to map function
 241    keys internally. */
 242
 243 #define XREBINDKEYSYM
 244
 245 /*
 246  *      Use BSD and POSIX-style signals.  This is crucial!
 247  */
 248
 249 /* MAKING_MAKEFILE must be defined in "ymakefile" before including config.h */
 250 #ifndef MAKING_MAKEFILE
 251
 252 /* Make sure signal.h is included so macros below don't mess with it. */
 253 /* DG/UX include files prevent multiple inclusion. */
 254
 255 #include <signal.h>
 256
 257 #define POSIX_SIGNALS
 258
 259 /* Not worth converting the old GNU malloc to work with POSIX_SIGNALS.  */
 260 #define SYSTEM_MALLOC
 261
 262 /* Define this if you use System 5 Release 4 Streams */
 263 #define SYSV4_PTYS
 264 #define open  sys_open
 265 #define close sys_close
 266 #define read  sys_read
 267 #define write sys_write
 268
 269 #define INTERRUPTABLE_OPEN
 270 #define INTERRUPTABLE_CLOSE
 271 /* can't hurt to define these, even though read/write should auto restart */
 272 #define INTERRUPTABLE_IO
 273
 274 /* Can't use sys_signal because then etc/server.c would need sysdep.o.  */
 275 #define signal(SIG,FUNC) berk_signal(SIG,FUNC)
 276
 277 #else /* MAKING_MAKEFILE */
 278 /* force gcc to be used */
 279 CC=gcc
 280 #endif /* not MAKING_MAKEFILE */
 281 \f
 282 /* definitions for xmakefile production */
 283 #ifdef COFF
 284
 285 #define C_COMPILER \
 286   TARGET_BINARY_INTERFACE=m88kdguxcoff gcc -traditional
 287
 288 #define LINKER \
 289   TARGET_BINARY_INTERFACE=m88kdguxcoff gcc -nostdlib
 290
 291 #define MAKE_COMMAND \
 292   TARGET_BINARY_INTERFACE=m88kdguxcoff make
 293
 294 #else /* not COFF */
 295
 296 #define C_COMPILER \
 297   TARGET_BINARY_INTERFACE=m88kdguxelf gcc -traditional
 298
 299 #define LINKER \
 300   TARGET_BINARY_INTERFACE=m88kdguxelf gcc -nostdlib
 301
 302 #define MAKE_COMMAND \
 303   TARGET_BINARY_INTERFACE=m88kdguxelf make
 304
 305 #endif /* COFF */