1 ;;; isearch.el --- incremental search minor mode.
3 ;; Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
5 ;; Author: Daniel LaLiberte <liberte@cs.uiuc.edu>
7 ;; |$Date: 1995/03/23 02:25:55 $|$Revision: 1.86 $
9 ;; This file is part of GNU Emacs.
11 ;; GNU Emacs is free software; you can redistribute it and/or modify
12 ;; it under the terms of the GNU General Public License as published by
13 ;; the Free Software Foundation; either version 2, or (at your option)
16 ;; GNU Emacs is distributed in the hope that it will be useful,
17 ;; but WITHOUT ANY WARRANTY; without even the implied warranty of
18 ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 ;; GNU General Public License for more details.
21 ;; You should have received a copy of the GNU General Public License
22 ;; along with GNU Emacs; see the file COPYING. If not, write to
23 ;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
27 ;;;====================================================================
30 ;; For programmed use of isearch-mode, e.g. calling (isearch-forward),
31 ;; isearch-mode behaves modally and does not return until the search
32 ;; is completed. It uses a recursive-edit to behave this way. Note:
33 ;; gnus does it wrong: (call-interactively 'isearch-forward).
35 ;; The key bindings active within isearch-mode are defined below in
36 ;; `isearch-mode-map' which is given bindings close to the default
37 ;; characters of the original isearch.el. With `isearch-mode',
38 ;; however, you can bind multi-character keys and it should be easier
39 ;; to add new commands. One bug though: keys with meta-prefix cannot
40 ;; be longer than two chars. Also see minibuffer-local-isearch-map
41 ;; for bindings active during `isearch-edit-string'.
43 ;; Note to emacs version 19 users: isearch-mode should work even if
44 ;; you switch windows with the mouse, in which case isearch-mode is
45 ;; terminated automatically before the switch. This is true of lemacs
46 ;; too, with a few more cleanups I've neglected in this release.
47 ;; No one has supplied patches for epoch yet.
49 ;; The search ring and completion commands automatically put you in
50 ;; the minibuffer to edit the string. This gives you a chance to
51 ;; modify the search string before executing the search. There are
52 ;; three commands to terminate the editing: C-s and C-r exit the
53 ;; minibuffer and search forward and reverse respectively, while C-m
54 ;; exits and does a nonincremental search.
56 ;; Exiting immediately from isearch uses isearch-edit-string instead
57 ;; of nonincremental-search, if search-nonincremental-instead is non-nil.
58 ;; The name of this option should probably be changed if we decide to
59 ;; keep the behavior. No point in forcing nonincremental search until
60 ;; the last possible moment.
63 ;; - Integrate the emacs 19 generalized command history.
64 ;; - Think about incorporating query-replace.
65 ;; - Hooks and options for failed search.
69 ;;; Changes before those recorded in ChangeLog:
71 ;;; Revision 1.4 92/09/14 16:26:02 liberte
72 ;;; Added prefix args to isearch-forward, etc. to switch between
73 ;;; string and regular expression searching.
74 ;;; Added some support for lemacs.
75 ;;; Added general isearch-highlight option - but only for lemacs so far.
76 ;;; Added support for frame switching in emacs 19.
77 ;;; Added word search option to isearch-edit-string.
78 ;;; Renamed isearch-quit to isearch-abort.
79 ;;; Numerous changes to comments and doc strings.
81 ;;; Revision 1.3 92/06/29 13:10:08 liberte
82 ;;; Moved modal isearch-mode handling into isearch-mode.
83 ;;; Got rid of buffer-local isearch variables.
84 ;;; isearch-edit-string used by ring adjustments, completion, and
85 ;;; nonincremental searching. C-s and C-r are additional exit commands.
86 ;;; Renamed all regex to regexp.
87 ;;; Got rid of found-start and found-point globals.
88 ;;; Generalized handling of upper-case chars.
90 ;;; Revision 1.2 92/05/27 11:33:57 liberte
91 ;;; Emacs version 19 has a search ring, which is supported here.
92 ;;; Other fixes found in the version 19 isearch are included here.
94 ;;; Also see variables search-caps-disable-folding,
95 ;;; search-nonincremental-instead, search-whitespace-regexp, and
96 ;;; commands isearch-toggle-regexp, isearch-edit-string.
98 ;;; semi-modal isearching is supported.
101 ;;; 3/18/92 Fixed invalid-regexp.
102 ;;; 3/18/92 Fixed yanking in regexps.
107 ;;;========================================================================
108 ;;; Some additional options and constants.
110 (defconst search-exit-option t
111 "*Non-nil means random control characters terminate incremental search.")
113 (defvar search-slow-window-lines 1
114 "*Number of lines in slow search display windows.
115 These are the short windows used during incremental search on slow terminals.
116 Negative means put the slow search window at the top (normally it's at bottom)
117 and the value is minus the number of lines.")
119 (defvar search-slow-speed 1200
120 "*Highest terminal speed at which to use \"slow\" style incremental search.
121 This is the style where a one-line window is created to show the line
122 that the search has reached.")
124 (defvar search-upper-case 'not-yanks
125 "*If non-nil, upper case chars disable case fold searching.
126 That is, upper and lower case chars must match exactly.
127 This applies no matter where the chars come from, but does not
128 apply to chars in regexps that are prefixed with `\\'.
129 If this value is `not-yanks', yanked text is always downcased.")
131 (defvar search-nonincremental-instead t
132 "*If non-nil, do a nonincremental search instead if exiting immediately.
133 Actually, `isearch-edit-string' is called to let you enter the search
134 string, and RET terminates editing and does a nonincremental search.")
136 (defconst search-whitespace-regexp "\\s-+"
137 "*If non-nil, regular expression to match a sequence of whitespace chars.
138 You might want to use something like \"[ \\t\\r\\n]+\" instead.")
140 ;; I removed the * from the doc string because highlighting is not
141 ;; currently a clean thing to do. Once highlighting is made clean,
142 ;; this feature can be re-enabled and advertised.
143 (defvar search-highlight nil
144 "*Non-nil means incremental search highlights the current match.")
146 (defvar isearch-mode-hook nil
147 "Function(s) to call after starting up an incremental search.")
149 (defvar isearch-mode-end-hook nil
150 "Function(s) to call after terminating an incremental search.")
152 ;;;==================================================================
155 (defvar search-ring nil
156 "List of search string sequences.")
157 (defvar regexp-search-ring nil
158 "List of regular expression search string sequences.")
160 (defconst search-ring-max 16
161 "*Maximum length of search ring before oldest elements are thrown away.")
162 (defconst regexp-search-ring-max 16
163 "*Maximum length of regexp search ring before oldest elements are thrown away.")
165 (defvar search-ring-yank-pointer nil
166 "Index in `search-ring' of last string reused.
168 (defvar regexp-search-ring-yank-pointer nil
169 "Index in `regexp-search-ring' of last string reused.
172 (defvar search-ring-update nil
173 "*Non-nil if advancing or retreating in the search ring should cause search.
174 Default value, nil, means edit the string instead.")
176 ;;;====================================================
177 ;;; Define isearch-mode keymap.
179 (defvar isearch-mode-map nil
180 "Keymap for isearch-mode.")
185 (or (vectorp (nth 1 map))
186 (error "The initialization of isearch-mode-map must be updated"))
187 ;; Give this map a vector 256 long, for dense binding
188 ;; of a larger range of ordinary characters.
189 (setcar (cdr map) (make-vector 256 nil))
191 ;; Make function keys, etc, exit the search.
192 (define-key map [t] 'isearch-other-control-char)
193 ;; Control chars, by default, end isearch mode transparently.
194 ;; We need these explicit definitions because, in a dense keymap,
195 ;; the binding for t does not affect characters.
196 ;; We use a dense keymap to save space.
198 (define-key map (make-string 1 i) 'isearch-other-control-char)
201 ;; Printing chars extend the search string by default.
203 (while (< i (length (nth 1 map)))
204 (define-key map (vector i) 'isearch-printing-char)
207 ;; To handle local bindings with meta char prefix keys, define
208 ;; another full keymap. This must be done for any other prefix
209 ;; keys as well, one full keymap per char of the prefix key. It
210 ;; would be simpler to disable the global keymap, and/or have a
211 ;; default local key binding for any key not otherwise bound.
212 (let ((meta-map (make-sparse-keymap)))
213 (define-key map (char-to-string meta-prefix-char) meta-map)
214 (define-key map [escape] meta-map))
215 (define-key map (vector meta-prefix-char t) 'isearch-other-meta-char)
217 ;; Several non-printing chars change the searching behavior.
218 (define-key map "\C-s" 'isearch-repeat-forward)
219 (define-key map "\C-r" 'isearch-repeat-backward)
220 (define-key map "\177" 'isearch-delete-char)
221 (define-key map "\C-g" 'isearch-abort)
222 ;; This assumes \e is the meta-prefix-char.
223 (or (= ?\e meta-prefix-char)
224 (error "Inconsistency in isearch.el"))
225 (define-key map "\e\e\e" 'isearch-cancel)
226 (define-key map [escape escape escape] 'isearch-cancel)
228 (define-key map "\C-q" 'isearch-quote-char)
230 (define-key map "\r" 'isearch-exit)
231 (define-key map "\C-j" 'isearch-printing-char)
232 (define-key map "\t" 'isearch-printing-char)
233 (define-key map " " 'isearch-whitespace-chars)
235 (define-key map "\C-w" 'isearch-yank-word)
236 (define-key map "\C-y" 'isearch-yank-line)
238 ;; Bind the ASCII-equivalent "function keys" explicitly to nil
239 ;; so that the default binding does not apply.
240 ;; As a result, these keys translate thru function-key-map
241 ;; as normal, and they have the effect of the equivalent ASCII char.
242 ;; We bind [escape] below.
243 (define-key map [tab] 'nil)
244 (define-key map [kp-0] 'nil)
245 (define-key map [kp-1] 'nil)
246 (define-key map [kp-2] 'nil)
247 (define-key map [kp-3] 'nil)
248 (define-key map [kp-4] 'nil)
249 (define-key map [kp-5] 'nil)
250 (define-key map [kp-6] 'nil)
251 (define-key map [kp-7] 'nil)
252 (define-key map [kp-8] 'nil)
253 (define-key map [kp-9] 'nil)
254 (define-key map [kp-add] 'nil)
255 (define-key map [kp-subtract] 'nil)
256 (define-key map [kp-multiply] 'nil)
257 (define-key map [kp-divide] 'nil)
258 (define-key map [kp-decimal] 'nil)
259 (define-key map [kp-separator] 'nil)
260 (define-key map [kp-equal] 'nil)
261 (define-key map [kp-tab] 'nil)
262 (define-key map [kp-space] 'nil)
263 (define-key map [kp-enter] 'nil)
264 (define-key map [delete] 'nil)
265 (define-key map [backspace] 'nil)
266 (define-key map [return] 'nil)
267 (define-key map [newline] 'nil)
269 ;; Define keys for regexp chars * ? |.
270 ;; Nothing special for + because it matches at least once.
271 (define-key map "*" 'isearch-*-char)
272 (define-key map "?" 'isearch-*-char)
273 (define-key map "|" 'isearch-|-char)
275 ;;; Turned off because I find I expect to get the global definition--rms.
276 ;;; ;; Instead bind C-h to special help command for isearch-mode.
277 ;;; (define-key map "\C-h" 'isearch-mode-help)
279 (define-key map "\M-n" 'isearch-ring-advance)
280 (define-key map "\M-p" 'isearch-ring-retreat)
281 (define-key map "\M-y" 'isearch-yank-kill)
283 (define-key map "\M-\t" 'isearch-complete)
285 ;; Switching frames should terminate isearch-mode
286 (define-key map [switch-frame] 'isearch-switch-frame-handler)
288 (setq isearch-mode-map map)
291 ;; Some bindings you may want to put in your isearch-mode-hook.
292 ;; Suggest some alternates...
293 ;; (define-key isearch-mode-map "\C-t" 'isearch-toggle-case-fold)
294 ;; (define-key isearch-mode-map "\C-t" 'isearch-toggle-regexp)
295 ;; (define-key isearch-mode-map "\C-^" 'isearch-edit-string)
298 (defvar minibuffer-local-isearch-map nil
299 "Keymap for editing isearch strings in the minibuffer.")
301 (or minibuffer-local-isearch-map
302 (let ((map (copy-keymap minibuffer-local-map)))
303 (define-key map "\r" 'isearch-nonincremental-exit-minibuffer)
304 (define-key map "\M-n" 'isearch-ring-advance-edit)
305 (define-key map "\M-p" 'isearch-ring-retreat-edit)
306 (define-key map "\M-\t" 'isearch-complete-edit)
307 (define-key map "\C-s" 'isearch-forward-exit-minibuffer)
308 (define-key map "\C-r" 'isearch-reverse-exit-minibuffer)
309 (setq minibuffer-local-isearch-map map)
312 ;;;========================================================
313 ;; Internal variables declared globally for byte-compiler.
314 ;; These are all set with setq while isearching
315 ;; and bound locally while editing the search string.
317 (defvar isearch-forward nil) ; Searching in the forward direction.
318 (defvar isearch-regexp nil) ; Searching for a regexp.
319 (defvar isearch-word nil) ; Searching for words.
321 (defvar isearch-cmds nil) ; Stack of search status sets.
322 (defvar isearch-string "") ; The current search string.
323 (defvar isearch-message "") ; text-char-description version of isearch-string
325 (defvar isearch-success t) ; Searching is currently successful.
326 (defvar isearch-invalid-regexp nil) ; Regexp not well formed.
327 (defvar isearch-within-brackets nil) ; Regexp has unclosed [.
328 (defvar isearch-other-end nil) ; Start (end) of match if forward (backward).
329 (defvar isearch-wrapped nil) ; Searching restarted from the top (bottom).
330 (defvar isearch-barrier 0)
332 ; case-fold-search while searching.
333 ; either nil, t, or 'yes. 'yes means the same as t except that mixed
334 ; case in the search string is ignored.
335 (defvar isearch-case-fold-search nil)
337 (defvar isearch-adjusted nil)
338 (defvar isearch-slow-terminal-mode nil)
339 ;;; If t, using a small window.
340 (defvar isearch-small-window nil)
341 (defvar isearch-opoint 0)
342 ;;; The window configuration active at the beginning of the search.
343 (defvar isearch-window-configuration nil)
345 ;; Flag to indicate a yank occurred, so don't move the cursor.
346 (defvar isearch-yank-flag nil)
348 ;;; A function to be called after each input character is processed.
349 ;;; (It is not called after characters that exit the search.)
350 ;;; It is only set from an optional argument to `isearch-mode'.
351 (defvar isearch-op-fun nil)
353 ;;; Is isearch-mode in a recursive edit for modal searching.
354 (defvar isearch-recursive-edit nil)
356 ;;; Should isearch be terminated after doing one search?
357 (defvar isearch-nonincremental nil)
359 ;; New value of isearch-forward after isearch-edit-string.
360 (defvar isearch-new-forward nil)
363 ;;;==============================================================
364 ;; Minor-mode-alist changes - kind of redundant with the
365 ;; echo area, but if isearching in multiple windows, it can be useful.
367 (or (assq 'isearch-mode minor-mode-alist)
368 (nconc minor-mode-alist
369 (list '(isearch-mode isearch-mode))))
371 (defvar isearch-mode nil) ;; Name of the minor mode, if non-nil.
372 (make-variable-buffer-local 'isearch-mode)
374 (define-key global-map "\C-s" 'isearch-forward)
375 (define-key esc-map "\C-s" 'isearch-forward-regexp)
376 (define-key global-map "\C-r" 'isearch-backward)
377 (define-key esc-map "\C-r" 'isearch-backward-regexp)
379 ;;;===============================================================
380 ;;; Entry points to isearch-mode.
381 ;;; These four functions should replace those in loaddefs.el
382 ;;; An alternative is to defalias isearch-forward etc to isearch-mode,
383 ;;; and look at this-command to set the options accordingly.
385 (defun isearch-forward (&optional regexp-p no-recursive-edit)
387 Do incremental search forward.
388 With a prefix argument, do an incremental regular expression search instead.
390 As you type characters, they add to the search string and are found.
391 The following non-printing keys are bound in `isearch-mode-map'.
393 Type \\[isearch-delete-char] to cancel characters from end of search string.
394 Type \\[isearch-exit] to exit, leaving point at location found.
395 Type LFD (C-j) to match end of line.
396 Type \\[isearch-repeat-forward] to search again forward,\
397 \\[isearch-repeat-backward] to search again backward.
398 Type \\[isearch-yank-word] to yank word from buffer onto end of search\
399 string and search for it.
400 Type \\[isearch-yank-line] to yank rest of line onto end of search string\
402 Type \\[isearch-quote-char] to quote control character to search for it.
403 \\[isearch-abort] while searching or when search has failed cancels input\
405 been found successfully.
406 \\[isearch-abort] when search is successful aborts and moves point to\
409 Also supported is a search ring of the previous 16 search strings.
410 Type \\[isearch-ring-advance] to search for the next item in the search ring.
411 Type \\[isearch-ring-retreat] to search for the previous item in the search\
413 Type \\[isearch-complete] to complete the search string using the search ring.
415 The above keys, bound in `isearch-mode-map', are often controlled by
416 options; do M-x apropos on search-.* to find them.
417 Other control and meta characters terminate the search
418 and are then executed normally (depending on `search-exit-option').
420 If this function is called non-interactively, it does not return to
421 the calling function until the search is done."
424 (isearch-mode t (not (null regexp-p)) nil (not no-recursive-edit)))
426 (defun isearch-forward-regexp (&optional not-regexp no-recursive-edit)
428 Do incremental search forward for regular expression.
429 With a prefix argument, do a regular string search instead.
430 Like ordinary incremental search except that your input
431 is treated as a regexp. See \\[isearch-forward] for more info."
433 (isearch-mode t (null not-regexp) nil (not no-recursive-edit)))
435 (defun isearch-backward (&optional regexp-p no-recursive-edit)
437 Do incremental search backward.
438 With a prefix argument, do a regular expression search instead.
439 See \\[isearch-forward] for more information."
441 (isearch-mode nil (not (null regexp-p)) nil (not no-recursive-edit)))
443 (defun isearch-backward-regexp (&optional not-regexp no-recursive-edit)
445 Do incremental search backward for regular expression.
446 With a prefix argument, do a regular string search instead.
447 Like ordinary incremental search except that your input
448 is treated as a regexp. See \\[isearch-forward] for more info."
450 (isearch-mode nil (null not-regexp) nil (not no-recursive-edit)))
453 (defun isearch-mode-help ()
455 (describe-function 'isearch-forward)
459 ;;;==================================================================
460 ;; isearch-mode only sets up incremental search for the minor mode.
461 ;; All the work is done by the isearch-mode commands.
464 ;;(defconst isearch-commands '(isearch-forward isearch-backward
465 ;; isearch-forward-regexp isearch-backward-regexp)
466 ;; "List of commands for which isearch-mode does not recursive-edit.")
469 (defun isearch-mode (forward &optional regexp op-fun recursive-edit word-p)
470 "Start isearch minor mode. Called by isearch-forward, etc."
472 ;; Initialize global vars.
473 (setq isearch-forward forward
474 isearch-regexp regexp
476 isearch-op-fun op-fun
477 isearch-case-fold-search case-fold-search
483 isearch-barrier (point)
485 isearch-yank-flag nil
486 isearch-invalid-regexp nil
487 isearch-within-brackets nil
488 isearch-slow-terminal-mode (and (<= baud-rate search-slow-speed)
490 (* 4 search-slow-window-lines)))
491 isearch-other-end nil
492 isearch-small-window nil
494 isearch-opoint (point)
495 search-ring-yank-pointer nil
496 regexp-search-ring-yank-pointer nil)
497 (setq isearch-window-configuration
498 (if isearch-slow-terminal-mode (current-window-configuration) nil))
500 (setq isearch-mode " Isearch") ;; forward? regexp?
501 (set-buffer-modified-p (buffer-modified-p)) ; update modeline
505 (make-local-variable 'overriding-local-map)
506 (setq overriding-local-map isearch-mode-map)
508 (run-hooks 'isearch-mode-hook)
510 (setq mouse-leave-buffer-hook '(isearch-done))
512 ;; isearch-mode can be made modal (in the sense of not returning to
513 ;; the calling function until searching is completed) by entering
514 ;; a recursive-edit and exiting it when done isearching.
516 (let ((isearch-recursive-edit t))
521 ;;;====================================================
522 ;; Some high level utilities. Others below.
524 (defun isearch-update ()
525 ;; Called after each command to update the display.
526 (if (null unread-command-events)
528 (if (not (input-pending-p))
530 (if (and isearch-slow-terminal-mode
531 (not (or isearch-small-window
532 (pos-visible-in-window-p))))
533 (let ((found-point (point)))
534 (setq isearch-small-window t)
535 (move-to-window-line 0)
536 (let ((window-min-height 1))
537 (split-window nil (if (< search-slow-window-lines 0)
538 (1+ (- search-slow-window-lines))
540 (1+ search-slow-window-lines)))))
541 (if (< search-slow-window-lines 0)
542 (progn (vertical-motion (- 1 search-slow-window-lines))
543 (set-window-start (next-window) (point))
544 (set-window-hscroll (next-window)
546 (set-window-hscroll (selected-window) 0))
548 (goto-char found-point)))
549 (if isearch-other-end
550 (if (< isearch-other-end (point)) ; isearch-forward?
551 (isearch-highlight isearch-other-end (point))
552 (isearch-highlight (point) isearch-other-end))
553 (isearch-dehighlight nil))
555 (setq ;; quit-flag nil not for isearch-mode
557 isearch-yank-flag nil)
560 (defun isearch-done (&optional nopush edit)
561 (setq mouse-leave-buffer-hook nil)
562 ;; Called by all commands that terminate isearch-mode.
563 ;; If NOPUSH is non-nil, we don't push the string on the search ring.
564 (setq overriding-local-map nil)
565 ;; (setq pre-command-hook isearch-old-pre-command-hook) ; for lemacs
566 (isearch-dehighlight t)
567 (let ((found-start (window-start (selected-window)))
568 (found-point (point)))
569 (if isearch-window-configuration
570 (set-window-configuration isearch-window-configuration))
572 (if isearch-small-window
573 (goto-char found-point)
574 ;; Exiting the save-window-excursion clobbers window-start; restore it.
575 (set-window-start (selected-window) found-start t))
577 ;; If there was movement, mark the starting position.
578 ;; Maybe should test difference between and set mark iff > threshold.
579 (if (/= (point) isearch-opoint)
580 (or (and transient-mark-mode mark-active)
582 (push-mark isearch-opoint t)
583 (or executing-macro (> (minibuffer-depth) 0)
584 (message "Mark saved where search started"))))))
586 (setq isearch-mode nil)
587 (set-buffer-modified-p (buffer-modified-p)) ;; update modeline
589 (if (and (> (length isearch-string) 0) (not nopush))
590 ;; Update the ring data.
591 (isearch-update-ring isearch-string isearch-regexp))
593 (run-hooks 'isearch-mode-end-hook)
594 (and (not edit) isearch-recursive-edit (exit-recursive-edit)))
596 (defun isearch-update-ring (string &optional regexp)
597 "Add STRING to the beginning of the search ring.
598 REGEXP says which ring to use."
600 (if (or (null regexp-search-ring)
601 (not (string= isearch-string (car regexp-search-ring))))
603 (setq regexp-search-ring
604 (cons isearch-string regexp-search-ring))
605 (if (> (length regexp-search-ring) regexp-search-ring-max)
606 (setcdr (nthcdr (1- search-ring-max) regexp-search-ring)
608 (if (or (null search-ring)
609 (not (string= isearch-string (car search-ring))))
611 (setq search-ring (cons isearch-string search-ring))
612 (if (> (length search-ring) search-ring-max)
613 (setcdr (nthcdr (1- search-ring-max) search-ring) nil))))))
615 ;;;=======================================================
616 ;;; Switching buffers should first terminate isearch-mode.
617 ;;; This is done quite differently for each variant of emacs.
618 ;;; For lemacs, see Exiting in lemacs below
620 ;; For Emacs 19, the frame switch event is handled.
621 (defun isearch-switch-frame-handler ()
622 (interactive) ;; Is this necessary?
623 ;; First terminate isearch-mode.
625 (handle-switch-frame (car (cdr (isearch-last-command-char)))))
627 ;;;========================================================
630 ;;;====================================================
631 ;; Commands active while inside of the isearch minor mode.
633 (defun isearch-exit ()
634 "Exit search normally.
635 However, if this is the first command after starting incremental
636 search and `search-nonincremental-instead' is non-nil, do a
637 nonincremental search instead via `isearch-edit-string'."
639 (if (and search-nonincremental-instead
640 (= 0 (length isearch-string)))
641 (let ((isearch-nonincremental t))
642 (isearch-edit-string)))
646 (defun isearch-edit-string ()
647 "Edit the search string in the minibuffer.
648 The following additional command keys are active while editing.
649 \\<minibuffer-local-isearch-map>
650 \\[exit-minibuffer] to resume incremental searching with the edited string.
651 \\[isearch-nonincremental-exit-minibuffer] to do one nonincremental search.
652 \\[isearch-forward-exit-minibuffer] to resume isearching forward.
653 \\[isearch-reverse-exit-minibuffer] to resume isearching backward.
654 \\[isearch-ring-advance-edit] to replace the search string with the next item in the search ring.
655 \\[isearch-ring-retreat-edit] to replace the search string with the previous item in the search ring.
656 \\[isearch-complete-edit] to complete the search string using the search ring.
658 If first char entered is \\[isearch-yank-word], then do word search instead."
660 ;; This code is very hairy for several reasons, explained in the code.
661 ;; Mainly, isearch-mode must be terminated while editing and then restarted.
662 ;; If there were a way to catch any change of buffer from the minibuffer,
663 ;; this could be simplified greatly.
664 ;; Editing doesn't back up the search point. Should it?
667 (let ((isearch-nonincremental isearch-nonincremental)
669 ;; Locally bind all isearch global variables to protect them
670 ;; from recursive isearching.
671 ;; isearch-string -message and -forward are not bound
672 ;; so they may be changed. Instead, save the values.
673 (isearch-new-string isearch-string)
674 (isearch-new-message isearch-message)
675 (isearch-new-forward isearch-forward)
676 (isearch-new-word isearch-word)
678 (isearch-regexp isearch-regexp)
679 (isearch-op-fun isearch-op-fun)
680 (isearch-cmds isearch-cmds)
681 (isearch-success isearch-success)
682 (isearch-wrapped isearch-wrapped)
683 (isearch-barrier isearch-barrier)
684 (isearch-adjusted isearch-adjusted)
685 (isearch-yank-flag isearch-yank-flag)
686 (isearch-invalid-regexp isearch-invalid-regexp)
687 (isearch-within-brackets isearch-within-brackets)
688 (isearch-other-end isearch-other-end)
689 (isearch-opoint isearch-opoint)
690 (isearch-slow-terminal-mode isearch-slow-terminal-mode)
691 (isearch-small-window isearch-small-window)
692 (isearch-recursive-edit isearch-recursive-edit)
693 ;; Save current configuration so we can restore it here.
694 (isearch-window-configuration (current-window-configuration))
697 ;; Actually terminate isearching until editing is done.
698 ;; This is so that the user can do anything without failure,
699 ;; like switch buffers and start another isearch, and return.
702 (exit nil)) ; was recursive editing
704 (isearch-message) ;; for read-char
706 (let* (;; Why does following read-char echo?
707 ;;(echo-keystrokes 0) ;; not needed with above message
708 (e (let ((cursor-in-echo-area t))
710 ;; Binding minibuffer-history-symbol to nil is a work-around
711 ;; for some incompatibility with gmhist.
712 (minibuffer-history-symbol)
713 (message-log-max nil))
714 ;; If the first character the user types when we prompt them
715 ;; for a string is the yank-word character, then go into
716 ;; word-search mode. Otherwise unread that character and
717 ;; read a key the normal way.
718 ;; Word search does not apply (yet) to regexp searches,
719 ;; no check is made here.
720 (message (isearch-message-prefix nil nil t))
721 (if (eq 'isearch-yank-word
722 (lookup-key isearch-mode-map (vector e)))
723 (setq isearch-word t ;; so message-prefix is right
726 (setq cursor-in-echo-area nil)
727 (setq isearch-new-string
729 (read-from-minibuffer
730 (isearch-message-prefix nil nil isearch-nonincremental)
732 minibuffer-local-isearch-map nil
735 (mapconcat 'isearch-text-char-description
736 isearch-new-string "")))
737 ;; Always resume isearching by restarting it.
738 (isearch-mode isearch-forward
744 ;; Copy new local values to isearch globals
745 (setq isearch-string isearch-new-string
746 isearch-message isearch-new-message
747 isearch-forward isearch-new-forward
748 isearch-word isearch-new-word))
750 ;; Empty isearch-string means use default.
751 (if (= 0 (length isearch-string))
752 (setq isearch-string (car (if isearch-regexp regexp-search-ring
754 ;; This used to set the last search string,
755 ;; but I think it is not right to do that here.
756 ;; Only the string actually used should be saved.
759 ;; Reinvoke the pending search.
763 (if isearch-nonincremental
765 ;; (sit-for 1) ;; needed if isearch-done does: (message "")
768 (quit ; handle abort-recursive-edit
769 (isearch-abort) ;; outside of let to restore outside global values
772 (defun isearch-nonincremental-exit-minibuffer ()
774 (setq isearch-nonincremental t)
777 (defun isearch-forward-exit-minibuffer ()
779 (setq isearch-new-forward t)
782 (defun isearch-reverse-exit-minibuffer ()
784 (setq isearch-new-forward nil)
787 (defun isearch-cancel ()
788 "Terminate the search and go back to the starting point."
790 (goto-char isearch-opoint)
792 (signal 'quit nil)) ; and pass on quit signal
794 (defun isearch-abort ()
795 "Abort incremental search mode if searching is successful, signalling quit.
796 Otherwise, revert to previous successful search and continue searching.
797 Use `isearch-exit' to quit without signalling."
799 ;; (ding) signal instead below, if quitting
802 ;; If search is successful, move back to starting point
803 ;; and really do quit.
804 (progn (goto-char isearch-opoint)
805 (setq isearch-success nil)
806 (isearch-done t) ; exit isearch
807 (signal 'quit nil)) ; and pass on quit signal
808 ;; If search is failing, or has an incomplete regexp,
809 ;; rub out until it is once more successful.
810 (while (or (not isearch-success) isearch-invalid-regexp)
814 (defun isearch-repeat (direction)
815 ;; Utility for isearch-repeat-forward and -backward.
816 (if (eq isearch-forward (eq direction 'forward))
817 ;; C-s in forward or C-r in reverse.
818 (if (equal isearch-string "")
819 ;; If search string is empty, use last one.
821 (or (if isearch-regexp
822 (car regexp-search-ring)
826 (mapconcat 'isearch-text-char-description
828 ;; If already have what to search for, repeat it.
832 (goto-char (if isearch-forward (point-min) (point-max)))
833 (setq isearch-wrapped t))))
834 ;; C-s in reverse or C-r in forward, change direction.
835 (setq isearch-forward (not isearch-forward)))
837 (setq isearch-barrier (point)) ; For subsequent \| if regexp.
839 (if (equal isearch-string "")
840 (setq isearch-success t)
841 (if (and isearch-success (equal (match-end 0) (match-beginning 0)))
842 ;; If repeating a search that found
843 ;; an empty string, ensure we advance.
844 (if (if isearch-forward (eobp) (bobp))
845 ;; If there's nowhere to advance to, fail (and wrap next time).
847 (setq isearch-success nil)
849 (forward-char (if isearch-forward 1 -1))
856 (defun isearch-repeat-forward ()
857 "Repeat incremental search forwards."
859 (isearch-repeat 'forward))
861 (defun isearch-repeat-backward ()
862 "Repeat incremental search backwards."
864 (isearch-repeat 'backward))
866 (defun isearch-toggle-regexp ()
867 "Toggle regexp searching on or off."
868 ;; The status stack is left unchanged.
870 (setq isearch-regexp (not isearch-regexp))
871 (if isearch-regexp (setq isearch-word nil))
874 (defun isearch-toggle-case-fold ()
875 "Toggle case folding in searching on or off."
877 (setq isearch-case-fold-search
878 (if isearch-case-fold-search nil 'yes))
879 (let ((message-log-max nil))
880 (message "%s%s [case %ssensitive]"
881 (isearch-message-prefix nil nil isearch-nonincremental)
883 (if isearch-case-fold-search "in" "")))
884 (setq isearch-adjusted t)
888 (defun isearch-delete-char ()
889 "Discard last input item and move point back.
890 If no previous match was done, just beep."
892 (if (null (cdr isearch-cmds))
898 (defun isearch-yank (chunk)
899 ;; Helper for isearch-yank-word and isearch-yank-line
900 ;; CHUNK should be word, line or kill.
906 (and (not isearch-forward) isearch-other-end
907 (goto-char isearch-other-end))
917 ;; Downcase the string if not supposed to case-fold yanked strings.
918 (if (and isearch-case-fold-search
919 (eq 'not-yanks search-upper-case))
920 (setq string (downcase string)))
921 (if isearch-regexp (setq string (regexp-quote string)))
922 (setq isearch-string (concat isearch-string string)
924 (concat isearch-message
925 (mapconcat 'isearch-text-char-description
927 ;; Don't move cursor in reverse search.
928 isearch-yank-flag t))
929 (isearch-search-and-update))
931 (defun isearch-yank-kill ()
932 "Pull string from kill ring into search string."
934 (isearch-yank 'kill))
936 (defun isearch-yank-word ()
937 "Pull next word from buffer into search string."
939 (isearch-yank 'word))
941 (defun isearch-yank-line ()
942 "Pull rest of line from buffer into search string."
944 (isearch-yank 'line))
947 (defun isearch-search-and-update ()
948 ;; Do the search and update the display.
949 (if (and (not isearch-success)
950 ;; unsuccessful regexp search may become
951 ;; successful by addition of characters which
952 ;; make isearch-string valid
953 (not isearch-regexp))
955 ;; In reverse search, adding stuff at
956 ;; the end may cause zero or many more chars to be
957 ;; matched, in the string following point.
958 ;; Allow all those possibilities without moving point as
959 ;; long as the match does not extend past search origin.
960 (if (and (not isearch-forward) (not isearch-adjusted)
962 (looking-at (if isearch-regexp isearch-string
963 (regexp-quote isearch-string)))
965 (or isearch-yank-flag
967 (min isearch-opoint isearch-barrier))))
968 (setq isearch-success t
969 isearch-invalid-regexp nil
970 isearch-within-brackets nil
971 isearch-other-end (match-end 0))
972 ;; Not regexp, not reverse, or no match at point.
973 (if (and isearch-other-end (not isearch-adjusted))
974 (goto-char (if isearch-forward isearch-other-end
977 (1+ isearch-other-end)))))
981 (if isearch-op-fun (funcall isearch-op-fun))
985 ;; *, ?, and | chars can make a regexp more liberal.
986 ;; They can make a regexp match sooner or make it succeed instead of failing.
987 ;; So go back to place last successful search started
988 ;; or to the last ^S/^R (barrier), whichever is nearer.
989 ;; + needs no special handling because the string must match at least once.
991 (defun isearch-*-char ()
992 "Handle * and ? specially in regexps."
997 (setq isearch-adjusted t)
998 (let ((cs (nth (if isearch-forward
999 5 ; isearch-other-end
1001 (car (cdr isearch-cmds)))))
1002 ;; (car isearch-cmds) is after last search;
1003 ;; (car (cdr isearch-cmds)) is from before it.
1004 (setq cs (or cs isearch-barrier))
1007 (max cs isearch-barrier)
1008 (min cs isearch-barrier))))))
1009 (isearch-process-search-char (isearch-last-command-char)))
1012 (defun isearch-|-char ()
1013 "If in regexp search, jump to the barrier."
1017 (setq isearch-adjusted t)
1018 (goto-char isearch-barrier)))
1019 (isearch-process-search-char (isearch-last-command-char)))
1022 (defalias 'isearch-other-control-char 'isearch-other-meta-char)
1024 (defun isearch-other-meta-char ()
1025 "Exit the search normally and reread this key sequence.
1026 But only if `search-exit-option' is non-nil, the default.
1027 If it is the symbol `edit', the search string is edited in the minibuffer
1028 and the meta character is unread so that it applies to editing the string."
1030 (cond ((eq search-exit-option 'edit)
1031 (let ((key (this-command-keys)))
1032 (apply 'isearch-unread (listify-key-sequence key)))
1033 (isearch-edit-string))
1035 (let* ((key (this-command-keys))
1036 (main-event (aref key 0))
1038 (apply 'isearch-unread (listify-key-sequence key))
1039 ;; Properly handle scroll-bar and mode-line clicks
1040 ;; for which a dummy prefix event was generated as (aref key 0).
1041 (and (> (length key) 1)
1042 (symbolp (aref key 0))
1043 (listp (aref key 1))
1044 (not (numberp (posn-point (event-start (aref key 1)))))
1045 ;; Convert the event back into its raw form,
1046 ;; with the dummy prefix implicit in the mouse event,
1047 ;; so it will get split up once again.
1048 (progn (setq unread-command-events
1049 (cdr unread-command-events))
1050 (setq main-event (car unread-command-events))
1051 (setcar (cdr (event-start main-event))
1052 (car (nth 1 (event-start main-event))))))
1053 ;; If we got a mouse click, maybe it was read with the buffer
1054 ;; it was clicked on. If so, that buffer, not the current one,
1055 ;; is in isearch mode. So end the search in that buffer.
1056 (if (and (listp main-event)
1057 (setq window (posn-window (event-start main-event)))
1060 (set-buffer (window-buffer window))
1064 (isearch-process-search-string (this-command-keys)
1065 (this-command-keys)))))
1067 (defun isearch-quote-char ()
1068 "Quote special characters for incremental search."
1070 (isearch-process-search-char (read-quoted-char (isearch-message t))))
1072 (defun isearch-return-char ()
1073 "Convert return into newline for incremental search.
1076 (isearch-process-search-char ?\n))
1078 (defun isearch-printing-char ()
1079 "Add this ordinary printing character to the search string and search."
1081 (isearch-process-search-char (isearch-last-command-char)))
1083 (defun isearch-whitespace-chars ()
1084 "Match all whitespace chars, if in regexp mode.
1085 If you want to search for just a space, type C-q SPC."
1088 (if (and search-whitespace-regexp (not isearch-within-brackets))
1089 (isearch-process-search-string search-whitespace-regexp " ")
1090 (isearch-printing-char))
1092 ;; This way of doing word search doesn't correctly extend current search.
1093 ;; (setq isearch-word t)
1094 ;; (setq isearch-adjusted t)
1095 ;; (goto-char isearch-barrier)
1096 (isearch-printing-char))))
1098 (defun isearch-process-search-char (char)
1099 ;; Append the char to the search string, update the message and re-search.
1100 (isearch-process-search-string
1101 (isearch-char-to-string char)
1102 (isearch-text-char-description char)))
1104 (defun isearch-process-search-string (string message)
1105 (setq isearch-string (concat isearch-string string)
1106 isearch-message (concat isearch-message message))
1107 (isearch-search-and-update))
1110 ;;===========================================================
1113 (defun isearch-ring-adjust1 (advance)
1114 ;; Helper for isearch-ring-adjust
1115 (let* ((ring (if isearch-regexp regexp-search-ring search-ring))
1116 (length (length ring))
1117 (yank-pointer-name (if isearch-regexp
1118 'regexp-search-ring-yank-pointer
1119 'search-ring-yank-pointer))
1120 (yank-pointer (eval yank-pointer-name)))
1123 (set yank-pointer-name
1125 (mod (+ (or yank-pointer 0)
1128 (setq isearch-string (nth yank-pointer ring)
1129 isearch-message (mapconcat 'isearch-text-char-description
1130 isearch-string "")))))
1132 (defun isearch-ring-adjust (advance)
1133 ;; Helper for isearch-ring-advance and isearch-ring-retreat
1134 (if (cdr isearch-cmds) ;; is there more than one thing on stack?
1135 (isearch-pop-state))
1136 (isearch-ring-adjust1 advance)
1137 (isearch-push-state)
1138 (if search-ring-update
1142 (isearch-edit-string)
1145 (defun isearch-ring-advance ()
1146 "Advance to the next search string in the ring."
1147 ;; This could be more general to handle a prefix arg, but who would use it.
1149 (isearch-ring-adjust 'advance))
1151 (defun isearch-ring-retreat ()
1152 "Retreat to the previous search string in the ring."
1154 (isearch-ring-adjust nil))
1156 (defun isearch-ring-advance-edit (n)
1157 "Insert the next element of the search history into the minibuffer."
1159 (let* ((yank-pointer-name (if isearch-regexp
1160 'regexp-search-ring-yank-pointer
1161 'search-ring-yank-pointer))
1162 (yank-pointer (eval yank-pointer-name))
1163 (ring (if isearch-regexp regexp-search-ring search-ring))
1164 (length (length ring)))
1167 (set yank-pointer-name
1169 (mod (- (or yank-pointer 0) n)
1173 (insert (nth yank-pointer ring))
1174 (goto-char (point-max)))))
1176 (defun isearch-ring-retreat-edit (n)
1177 "Inserts the previous element of the search history into the minibuffer."
1179 (isearch-ring-advance-edit (- n)))
1181 ;;(defun isearch-ring-adjust-edit (advance)
1182 ;; "Use the next or previous search string in the ring while in minibuffer."
1183 ;; (isearch-ring-adjust1 advance)
1185 ;; (insert isearch-string))
1187 ;;(defun isearch-ring-advance-edit ()
1189 ;; (isearch-ring-adjust-edit 'advance))
1191 ;;(defun isearch-ring-retreat-edit ()
1192 ;; "Retreat to the previous search string in the ring while in the minibuffer."
1194 ;; (isearch-ring-adjust-edit nil))
1197 (defun isearch-complete1 ()
1198 ;; Helper for isearch-complete and isearch-complete-edit
1199 ;; Return t if completion OK, nil if no completion exists.
1200 (let* ((ring (if isearch-regexp regexp-search-ring search-ring))
1201 (alist (mapcar (function (lambda (string) (list string))) ring))
1202 (completion-ignore-case case-fold-search)
1203 (completion (try-completion isearch-string alist)))
1206 ;; isearch-string stays the same
1208 ((or completion ; not nil, must be a string
1209 (= 0 (length isearch-string))) ; shouldnt have to say this
1210 (if (equal completion isearch-string) ;; no extension?
1211 (if completion-auto-help
1212 (with-output-to-temp-buffer "*Isearch completions*"
1213 (display-completion-list
1214 (all-completions isearch-string alist))))
1215 (setq isearch-string completion))
1218 (message "No completion") ; waits a second if in minibuffer
1221 (defun isearch-complete ()
1222 "Complete the search string from the strings on the search ring.
1223 The completed string is then editable in the minibuffer.
1224 If there is no completion possible, say so and continue searching."
1226 (if (isearch-complete1)
1227 (isearch-edit-string)
1232 (defun isearch-complete-edit ()
1233 "Same as `isearch-complete' except in the minibuffer."
1235 (setq isearch-string (buffer-string))
1236 (if (isearch-complete1)
1239 (insert isearch-string))))
1242 ;;;==============================================================
1243 ;; The search status stack (and isearch window-local variables, not used).
1244 ;; Need a structure for this.
1246 (defun isearch-top-state ()
1247 (let ((cmd (car isearch-cmds)))
1248 (setq isearch-string (car cmd)
1249 isearch-message (car (cdr cmd))
1250 isearch-success (nth 3 cmd)
1251 isearch-forward (nth 4 cmd)
1252 isearch-other-end (nth 5 cmd)
1253 isearch-word (nth 6 cmd)
1254 isearch-invalid-regexp (nth 7 cmd)
1255 isearch-wrapped (nth 8 cmd)
1256 isearch-barrier (nth 9 cmd)
1257 isearch-within-brackets (nth 10 cmd)
1258 isearch-case-fold-search (nth 11 cmd))
1259 (goto-char (car (cdr (cdr cmd))))))
1261 (defun isearch-pop-state ()
1262 (setq isearch-cmds (cdr isearch-cmds))
1266 (defun isearch-push-state ()
1268 (cons (list isearch-string isearch-message (point)
1269 isearch-success isearch-forward isearch-other-end
1271 isearch-invalid-regexp isearch-wrapped isearch-barrier
1272 isearch-within-brackets isearch-case-fold-search)
1276 ;;;==================================================================
1279 (defun isearch-message (&optional c-q-hack ellipsis)
1280 ;; Generate and print the message string.
1281 (let ((cursor-in-echo-area ellipsis)
1283 (isearch-message-prefix c-q-hack ellipsis isearch-nonincremental)
1285 (isearch-message-suffix c-q-hack ellipsis)
1289 (let ((message-log-max nil))
1290 (message "%s" m)))))
1292 (defun isearch-message-prefix (&optional c-q-hack ellipsis nonincremental)
1293 ;; If about to search, and previous search regexp was invalid,
1294 ;; check that it still is. If it is valid now,
1295 ;; let the message we display while searching say that it is valid.
1296 (and isearch-invalid-regexp ellipsis
1298 (progn (re-search-forward isearch-string (point) t)
1299 (setq isearch-invalid-regexp nil
1300 isearch-within-brackets nil))
1302 ;; If currently failing, display no ellipsis.
1303 (or isearch-success (setq ellipsis nil))
1304 (let ((m (concat (if isearch-success "" "failing ")
1305 (if isearch-wrapped "wrapped ")
1306 (if isearch-word "word " "")
1307 (if isearch-regexp "regexp " "")
1308 (if nonincremental "search" "I-search")
1309 (if isearch-forward ": " " backward: ")
1311 (aset m 0 (upcase (aref m 0)))
1315 (defun isearch-message-suffix (&optional c-q-hack ellipsis)
1316 (concat (if c-q-hack "^Q" "")
1317 (if isearch-invalid-regexp
1318 (concat " [" isearch-invalid-regexp "]")
1322 ;;;========================================================
1325 (defun isearch-search ()
1326 ;; Do the search with the current search string.
1327 (isearch-message nil t)
1328 (if (and (eq isearch-case-fold-search t) search-upper-case)
1329 (setq isearch-case-fold-search
1330 (isearch-no-upper-case-p isearch-string isearch-regexp)))
1331 (condition-case lossage
1332 (let ((inhibit-quit nil)
1333 (case-fold-search isearch-case-fold-search))
1334 (if isearch-regexp (setq isearch-invalid-regexp nil))
1335 (setq isearch-within-brackets nil)
1336 (setq isearch-success
1340 'word-search-forward 'word-search-backward))
1343 're-search-forward 're-search-backward))
1345 (if isearch-forward 'search-forward 'search-backward)))
1346 isearch-string nil t))
1348 (setq isearch-other-end
1349 (if isearch-forward (match-beginning 0) (match-end 0)))))
1351 (quit (isearch-unread ?\C-g)
1352 (setq isearch-success nil))
1355 (setq isearch-invalid-regexp (car (cdr lossage)))
1356 (setq isearch-within-brackets (string-match "\\`Unmatched \\["
1357 isearch-invalid-regexp))
1359 "\\`Premature \\|\\`Unmatched \\|\\`Invalid "
1360 isearch-invalid-regexp)
1361 (setq isearch-invalid-regexp "incomplete input")))
1363 ;; stack overflow in regexp search.
1364 (setq isearch-invalid-regexp (car (cdr lossage)))))
1368 ;; Ding if failed this time after succeeding last time.
1369 (and (nth 3 (car isearch-cmds))
1371 (goto-char (nth 2 (car isearch-cmds)))))
1375 ;;;========================================================
1378 (defvar isearch-overlay nil)
1380 (defun isearch-highlight (beg end)
1381 (if (or (null search-highlight) (null window-system))
1383 (or isearch-overlay (setq isearch-overlay (make-overlay beg end)))
1384 (move-overlay isearch-overlay beg end (current-buffer))
1385 (overlay-put isearch-overlay 'face
1386 (if (internal-find-face 'isearch nil)
1387 'isearch 'region))))
1389 (defun isearch-dehighlight (totally)
1391 (delete-overlay isearch-overlay)))
1393 ;;;===========================================================
1394 ;;; General utilities
1397 (defun isearch-no-upper-case-p (string regexp-flag)
1398 "Return t if there are no upper case chars in STRING.
1399 If REGEXP-FLAG is non-nil, disregard letters preceeded by `\\' (but not `\\\\')
1400 since they have special meaning in a regexp."
1401 (let ((case-fold-search nil))
1402 (not (string-match (if regexp-flag "\\(^\\|\\\\\\\\\\|[^\\]\\)[A-Z]"
1407 ;;;=================================================
1408 ;; Portability functions to support various Emacs versions.
1410 ;; To quiet the byte-compiler.
1411 (defvar unread-command-event)
1412 (defvar unread-command-events)
1413 (defvar last-command-event)
1415 (defun isearch-char-to-string (c)
1418 (defun isearch-text-char-description (c)
1419 (if (and (integerp c) (or (< c ?\ ) (= c ?\^?)))
1420 (text-char-description c)
1421 (isearch-char-to-string c)))
1423 ;; General function to unread characters or events.
1424 (defun isearch-unread (&rest char-or-events)
1425 (setq unread-command-events
1426 (append char-or-events unread-command-events)))
1428 (defun isearch-last-command-char ()
1429 ;; General function to return the last command character.
1432 ;;; isearch.el ends here