]> code.delx.au - refind/blob - NEWS.txt
Refinements to image-sizing code; 0.7.8 release version.
[refind] / NEWS.txt
1 0.7.8 (3/9/2014):
2 -----------------
3
4 - Added "debian" directory to source, which facilitates creation of Debian
5 packages. Packages built in this way are built with GNU-EFI and don't run
6 any post-installation script, so although the rEFInd binaries are on the
7 hard disk, they aren't installed to be bootable; you must manually run
8 install.sh. Also, at least on Ubuntu, the Make.common file's /usr/lib64
9 references must be changed to /usr/lib. This is more of a proof of
10 concept and a "leg up" for distribution maintainers than anything else.
11
12 - Two new options, big_icon_size and small_icon_size, set the size of
13 the first-row OS icons and of the second-row tool icons, respectively.
14 The big_icon_size option also indirectly sets the size of disk-type
15 badges; they're 1/4 the size of the big icons. Default values are 128 and
16 48, respectively, to match the actual icon files provided with rEFInd. If
17 the icon you're using is of a different size than you've specified,
18 rEFInd scales it. For best quality, you should both provide icons drawn
19 to the right size and set the icon sizes in refind.conf.
20
21 - rEFInd now automatically scales icons to fit the standard icon sizes.
22 This won't have any effect with the icons that come with rEFInd, but it
23 can help if you want to use another icon, since you needn't scale it in a
24 graphics program before using it. Note that rEFInd uses bitmap icons, so
25 scaling by a huge amount (say, a 16x16 icon to fit the standard 128x128
26 OS icon) is not likely to look good.
27
28 - Added new option, banner_scale, that tells rEFInd how to handle banners:
29 Set to "noscale" (the default), banners are not scaled, although they'll
30 be cropped if they're too big for the display. This is the same as the
31 behavior in previous versions. Set to "fillscreen", rEFInd now scales the
32 banner image (larger or smaller) to fill the display.
33
34 - Adjusted the post-installation script in refind.spec (used to generate
35 RPMs, and therefore also indirectly Debian packages) to search for
36 existing shim program files under the filesnames shim.efi and shimx64.efi
37 rather than just shim.efi. Ubuntu uses shimx64.efi, so Debian packages
38 were failing to detect Ubuntu's shim in previous versions. (Note,
39 however, that Ubuntu's early shim 0.1 is unsuitable for use with rEFInd
40 The newer 0.4 version that's in the repositories now should work fine;
41 it's only when installing on an older system that's NOT been updated that
42 problems might arise.
43
44 0.7.7 (1/3/2014):
45 -----------------
46
47 - Can now specify complete paths, optionally including volumes, in
48 dont_scan_files.
49
50 - Added shimx64.efi to the default dont_scan_files list.
51
52 - Added windows_recovery_files token, to specify what program(s) launch a
53 Windows recovery utility; and the "windows_recovery" option to
54 "showtools," to control whether or not to display the Windows recovery
55 utility on the second row of icons.
56
57 - The use_graphics_for, also_scan_dirs, dont_scan_dirs, dont_scan_files,
58 and scan_driver_dirs tokens in refind.conf now support "+" as the first
59 option, which causes the remaining options to be added to the default
60 value rather than replacing that value. (This has no practical effect for
61 scan_driver_dirs, though, since it has a null default value.)
62
63 - Added support for specifying the configuration file at program launch,
64 via the "-c" parameter, as in "refind_x64.efi -c foo.conf" to use the
65 foo.conf file as the main configuration file.
66
67 - Scans of ext2/3/4fs and ReiserFS partitions now omit partitions with
68 duplicate filesystem UUIDs. These are likely parts of RAID arrays and so
69 would have the same boot loaders or kernels as the first one with a given
70 UUID.
71
72 - Added feature in install.sh: Script now tries to locate and mount an ESP
73 in Linux, if it's currently unmounted.
74
75 - Fixed bug in mkrlconf.sh and install.sh that caused a stray line break
76 and PARTUUID= specification to appear in generated refind_linux.conf file
77 under some circumstances.
78
79 0.7.6 (12/15/2013):
80 -------------------
81
82 - Added support for multiple "default_selection" targets. These MUST be
83 comma-separated AND enclosed in quotes, as in:
84 default_selection "fred,ginger"
85 This example will launch "fred" by default if it's available; and if
86 it's not, rEFInd will attempt to launch "ginger" as the default.
87
88 - Added support for time-sensitive "default_selection" setting. This token
89 may now have either one or three options. If one, it's interpreted as it
90 has been in the past, as setting a default that's independent of times.
91 If you follow this default by two times, however, those are interpreted
92 as the start and end times (in 24-hour format) for a default setting. For
93 instance, "default_selection foo 8:00 17:00" causes foo to be the default
94 from 8:00 (AM) to 17:00 (aka 5:00 PM). You can include multiple
95 "default_selection" lines to set different defaults for a variety of
96 times. If they're in conflict, the last one takes precedence. Note that
97 times are hardware clock's native value, which may be local time or UTC,
98 depending on your computer.
99
100 - Added support for a blank-screen startup: Set "screensaver -1" and the
101 screen saver will be initialized when rEFInd starts. If you set a low
102 "timeout" value, the result will be a boot straight to the default OS
103 unless you hit a key soon after rEFInd starts. Once you hit a key, the
104 screensaver will be disabled.
105
106 - Added --ownhfs {target} option to install.sh. This option causes rEFInd
107 to install to an HFS+ partition in a way that's more consistent with the
108 way the Mac's native boot loader is installed. Note that you should NOT
109 install to an already-bootable partition with this option, since it will
110 overwrite the existing boot loader, which would render OS X unbootable.
111
112 0.7.5 (11/10/2013):
113 -------------------
114
115 - Fixed bug that caused unbootable exFAT partitions to show up as
116 bootable on Macs with BIOS/CSM/legacy boot options enabled.
117
118 - Fixed bug in install.sh that caused installs to the ESP on recent
119 versions of OS X to fail.
120
121 - Fixed bug that caused rEFInd to hang on some Macs when multiple EFI
122 drivers were present.
123
124 - Fixed bug that caused clear to default gray screen when launching OSes
125 with 'use_graphics_for' enabled, even when the rEFInd background is not
126 gray. Now rEFInd clears to the same background color used in its menu.
127 When launching OS X, though, the OS X boot loader will itself clear to
128 gray a second or so later; and when launching Linux, it will clear to
129 black a second or so later.
130
131 0.7.4.1 (8/25/2013):
132 --------------------
133
134 - My initial 0.7.4 release broke legacy-boot ability on Macs, so I quickly
135 released this version using the original 0.7.4 filenames to fix the
136 problem.
137
138 0.7.4 (8/25/2013):
139 ------------------
140
141 - Fixed options passing to loader to include loader's filename as the first
142 option. This omission had no effect on most boot loaders, but caused
143 VMware's mboot64.efi to fail.
144
145 - Added support for memtest86 as second-row option. Program must be
146 stored in EFI/tools, EFI/tools/memtest, EFI/tools/memtest86, EFI/memtest,
147 or EFI/memtest86; and must use the name memtest86.efi, memtest86_x64.efi,
148 memtest86x64.efi, or bootx64.efi (changing "x64" to "ia32" on IA-32
149 systems). The memtest86 program is scanned for when the "showtools"
150 option includes the "memtest" or "memtest86" token, which it does by
151 default.
152
153 - Added space to end of "Boot %s from %s" string; enables adding a space
154 to the end of the "default_selection" item (in quotes) to set a default
155 that matches a volume name that's identical to another one except for
156 extra characters at the end of the non-wanted volume's name.
157
158 - Fixed bug that could cause rEFInd to hang when launching boot loaders
159 under some conditions. (Launching from Firewire drives on Macs is the
160 known case, but there may be others.)
161
162 0.7.3 (8/7/2013):
163 -----------------
164
165 - Fixed bug that caused missing media-type badges on BIOS-mode boot
166 loaders on Macs.
167
168 - Fixed bug that caused failure when launching BIOS-mode OSes on Macs.
169
170 0.7.2 (8/6/2013):
171 -----------------
172
173 - Fixed bug that caused display glitches in the final entry on the first
174 row of icons if the second row of icons was empty.
175
176 - Fixed bug that could cause incorrect scanning or even a rEFInd crash when
177 using volume specification in also_scan_dirs token.
178
179 - Added protection against loading invalid drivers and other EFI programs.
180 (Some EFIs crash when attempting to load such drivers and programs.)
181
182 - Added PreLoader.efi and shim-fedora.efi to default dont_scan_files list;
183 it's now "shim.efi, shim-fedora.efi, PreLoader.efi, TextMode.efi,
184 ebounce.efi, GraphicsConsole.efi, MokManager.efi, HashTool.efi,
185 HashTool-signed.efi".
186
187 - Added icon for Funtoo Linux.
188
189 - Fixed reading of volume badges from user-specified icons directory, which
190 was broken.
191
192 - Fixed handling of /.VolumeBadge.icns (or /.VolumeBadge.png) files, which
193 was broken.
194
195 0.7.1 (7/8/2013):
196 -----------------
197
198 - Fixed build problem with recent development versions of EDK2.
199
200 - Added scan for Boot Repair's backup of the Windows boot loader
201 (bkpbootmgfw.efi). If found, give separate entries for it and for
202 bootmgfw.efi, each with its own descriptive text label.
203
204 - Fixed also_scan_dirs; used to have bug that caused it to ignore
205 volume specification, if present.
206
207 - Fixed bug in driver cache that caused Btrfs driver to hang sometimes.
208
209 0.7.0 (6/27/2013):
210 ------------------
211
212 - Added Btrfs signature to rEFInd, so that it can identify the filesystem
213 type for volumes that lack labels.
214
215 - Changed some critical filesystem driver pointers from 32-bit to 64-bit.
216 This *SHOULD* enable use of over-2TiB filesystems (for those filesystems
217 that support such large volumes). This capability is largely untested,
218 though.
219
220 - Added a cache to the filesystem driver core, and therefore to all the
221 filesystem drivers. This cache greatly improves performance in
222 VirtualBox, and offers modest performance improvements on a few "real"
223 computers. The most dramatic improvement is on ext2/3fs under VirtualBox:
224 Loading a kernel and initrd used to take ~200 seconds on my system, but
225 now takes ~3 seconds! On most "real" hardware, the improvement is much
226 less dramatic -- an improvement of a second or less, presumably because
227 of cacheing within the EFI or on the hard disk itself.
228
229 - Filter boot loaders based on a test of their validity; keeps out Linux
230 kernels without EFI stub loader code, loaders for the wrong architecture,
231 non-EFI loaders, etc.
232
233 - New Btrfs driver, contributed by Samuel Liao based on GRUB 2.00 Btrfs
234 code.
235
236 0.6.12 (6/18/2013):
237 -------------------
238
239 - Changed the 64-bit EFI shell included in the CD-R and USB flash drive
240 images to a version 2 shell that should support the "bcfg" command.
241
242 - Added support for PreBootloader to refind.spec's built-in installation
243 script.
244
245 - Added support for the Linux Foundation's PreLoader to install.sh. It's
246 treated just like shim, including using the --shim option (or, now,
247 --preloader); but it searches for and copies HashTool.efi rather than
248 MokManager.efi, and filenames are adjusted appropriately.
249
250 - Added code to determine Linux root filesystem from /etc/fstab file, if
251 it's on the same partition as the kernel and if the refind_linux.conf
252 file is not available. This enables rEFInd to boot Linux without any
253 rEFInd-specific configuration files on some (but not all) systems.
254
255 0.6.11 (5/13/2013):
256 -------------------
257
258 - New feature: rEFInd now ignores symbolic links to files on filesystems
259 that support them. This prevents the "vmlinuz" symbolic link that some
260 distributions create in the root directory from appearing in the loader
261 list. Note that this does NOT affect symbolic links to directories.
262
263 - Added icons for Lubuntu and Kubuntu.
264
265 - Improved the install.sh script so that it does a better job dealing with
266 directory names that contain spaces.
267
268 - rEFInd now tries to guess the Linux distribution type based on the kernel
269 filename (Fedora and RHEL only) or the "ID" or "NAME" variables in
270 /etc/os-release on the kernel's partition. None of these is guaranteed to
271 work. A fallback of the Tux penguin icon remains in place in case rEFInd
272 can't find anything substantive enough for a guess.
273
274 - Added "EFI\opensuse" to the locations searched for MOK utilities, since
275 OpenSUSE now uses that name.
276
277 - Renamed "Reboot to Firmware User Interface" to "Reboot to Computer Setup
278 Utility" in menu.
279
280 - Fixed bug in gptsync that caused it to hang if the disk had too few GPT
281 partitions to fill the MBR.
282
283 0.6.10 (5/5/2013):
284 ------------------
285
286 - Added support for "screensaver" token. If set to a positive integer, this
287 causes the screen to blank after the specified number of seconds of
288 inactivity. Pressing most keys (unfortunately NOT including Shift, Alt,
289 or Ctrl) will restore the display and restart the screen saver timeout.
290
291 - Added icon for ChromeOS (os_chrome.icns in the icons subdirectory).
292 ChromeBooks reportedly boots using the fallback filename, but if a user
293 wants to install rEFInd on a ChromeBook, renaming the original EFI/BOOT
294 directory to EFI/chrome and then installing rEFInd in the fallback
295 filename will bring up this new icon for ChromeOS.
296
297 - Added new option to reboot the computer into the firmware's user
298 interface. This option is active by default, or can be set via the
299 "firmware" option to the "showtools" token in refind.conf. It works
300 on only some computers, though; older computers lack this feature, and
301 when rEFInd is told to use this feature on such computers, the directive
302 is quietly ignored.
303
304 - Upgraded LodePNG library from version 20121216 to 20130415 and
305 restructured rEFInd-specific modifications to simplify future upgrades.
306
307 - Replaced hexadecimal error code with description if an error is
308 encountered when saving a screen shot.
309
310 - Enable multiple screen shots: Rather than naming all screen shots
311 "screenshot.bmp", the name is now "screenshot_###.bmp", where "###" is a
312 sequence number, starting with "001".
313
314 0.6.9 (4/25/2013):
315 ------------------
316
317 - Modified default banner to include the new rEFInd icon, provided by Erik
318 Kemperman.
319
320 - Worked around a suspected firmware bug that caused rEFInd 0.6.6 to 0.6.8
321 to hang at startup on some systems (DUET and some Macs).
322
323 - Modified rEFInd to search for gptsync under the names gptsync.efi and
324 gptsync_{arch}.efi, where {arch} is ia32 or x64. (Previous versions
325 searched only for gptsync.efi.)
326
327 - Added gptsync program from rEFIt project, but with some changes to
328 improve flexibility and make it less likely that UEFI users will
329 accidentally trash their systems.
330
331 - Changed timeout code so that the timeout continues if the keyboard is
332 disconnected. This can help in booting a headless server or a system with
333 a bluetooth or other keyboard that's not recognized by the EFI.
334
335 0.6.8 (3/18/2013):
336 ------------------
337
338 - Added workaround for presumed EFI bug that was causing "Invalid
339 Parameter" errors when scanning for boot loaders on some computers.
340
341 - Added search for an EFI shell called shell.efi in the root directory
342 (previously this name was only accepted in EFI\tools).
343
344 - Fixed bug in install.sh that caused it to fail on some systems (Fedora
345 18, for instance) because of a problem identifying the ESP.
346
347 - Fixed bug that caused icons named after boot loaders to not be used.
348
349 0.6.7 (2/3/2013):
350 -----------------
351
352 - Added a more explicit error message summarizing options when a launch of
353 a program results in a Secure Boot failure.
354
355 - Changed MOK tool detection to scan all volumes, not just the rEFInd
356 home volume. This is desirable because the Linux Foundation's HashTool
357 can only scan its own volume, making it desirable to place copies of this
358 program on every volume that holds EFI boot loader binaries.
359
360 - Added support for launching the Linux Foundation HashTool as a means of
361 managing MOKs (or MOK hashes, at any rate).
362
363 - Fixed bug that caused rEFInd to present an entry for itself as a
364 Microsoft OS if it was launched as EFI/Microsoft/Boot/bootmgfw.efi.
365
366 - Fixed bug that caused dont_scan_volumes option to be added to
367 also_scan_dirs list.
368
369 - Fixed dont_scan_volumes so that it works with OS X boot loaders.
370
371 - Fixed broken mixing of PNG and ICNS icons when using a user-specified
372 icons directory -- previously, an ICNS file in the default directory
373 would override a PNG file in the user-specified directory.
374
375 0.6.6 (1/26/2013):
376 ------------------
377
378 - rEFInd now ignores the fallback boot loader (EFI/BOOT/bootx64.efi or
379 EFI/BOOT/bootia32.efi) if it's identical to another boot loader on
380 the same volume. This is intended to help unclutter the display on
381 systems that run Windows, since Windows tends to duplicate its own boot
382 loader under the fallback name.
383
384 - Added new "font" token to refind.conf, which enables specifying a font in
385 the form of a PNG file. This file must contain monospace glyphs for the
386 95 characters from ASCII 32 to 126 (space through tilde), inclusive, plus
387 a glyph to be displayed for characters outside of this range, for a total
388 of 96 glyphs.
389
390 - Replaced the old font (inherited from rEFInd) with an anti-aliased
391 version of Luxi Mono Regular 14 point.
392
393 - Fixed bug that caused rEFInd to ignore manual boot stanzas in files
394 included via the "include" token in refind.conf.
395
396 - Fixed bug that caused ASSERT error on some systems (and conceivably a
397 crash on startup on some) when default_selection line in refind.conf was
398 commented out or empty.
399
400 - Fixed bug that caused "Binary is whitelisted" message to persist on
401 screen after loading MOK-signed drivers in Secure Boot mode.
402
403 - Fixed bug that caused rEFInd to ignore the "icon" token in refind.conf
404 manual boot stanzas.
405
406 - Fixed bug in install.sh that caused the script to fail to update
407 drivers when rEFInd was installed in EFI/BOOT/.
408
409 0.6.5 (1/16/2013):
410 ------------------
411
412 - Improved text color support: rEFInd now uses black text against light
413 backgrounds and white text against dark backgrounds.
414
415 - Added support for PNGs as banners, icons, and selectors.
416
417 - Added icon for ALT Linux.
418
419 - Added "safemode" option to "hideui" token, to hide option to boot into
420 safe mode for OS X ("-v -x" option to boot.efi).
421
422 - Added icon for Haiku (os_haiku.icns).
423
424 - Enable transparency of icons & main-menu text when the banner icon is
425 sized to cover these areas.
426
427 - Fixed bug that could cause rEFInd to crash if fed a banner image that's
428 too big. Note that "too big" can be substantially smaller than the screen
429 resolution!
430
431 0.6.4 (1/8/2013):
432 -----------------
433
434 - Revised install.sh to copy ext2fs driver, rather than ext4fs driver, for
435 ext2/3 filesystems. This can help keep non-functional entries from links
436 from /vmlinuz to /boot/vmlinuz out of the menu if the system uses ext4fs
437 on root and ext2fs or ext3fs on /boot.
438
439 - Fixed a couple of memory management bugs that cause rEFInd to hang at
440 startup on some systems.
441
442 0.6.3 (1/6/2013):
443 -----------------
444
445 - Added the ability to specify a volume name or number in the
446 "dont_scan_dirs" and "also_scan_dirs" tokens.
447
448 - Fixed a bug that caused removable EFI media to not appear in scan lists
449 if rEFInd was installed as EFI/BOOT/boot{arch}.efi on a hard disk.
450
451 - Modified ISO-9660 driver so that it can handle discs with other than
452 2048-byte sectors. This makes it useful for reading "hybrid ISO" images
453 burned to USB flash disks.
454
455 - New mvrefind.sh script to move a rEFInd installation between a standard
456 location (typically EFI/refind) and one of the fallback locations
457 (EFI/BOOT or EFI/Microsoft/Boot). It can also do more exotic locations.
458
459 - The install.sh script now installs to EFI/BOOT/bootx64.efi or
460 EFI/Microsoft/Boot/bootmgfw.efi if it's run in BIOS mode. This is
461 intended to give some chance of producing a bootable installation should
462 a user accidentally install Linux in EFI mode and then install rEFInd
463 from that installation.
464
465 - The install.sh script now tries to find an existing rEFInd installation
466 and upgrade it, even if it's in EFI/BOOT or EFI/Microsoft/Boot rather
467 than in EFI/refind.
468
469 - New "--yes" option to install.sh to help with unattended or automated
470 installations (as from an RPM or Debian package).
471
472 0.6.2 (12/30/2012):
473 -------------------
474
475 - Inclusion of a sample refind.spec file for the benefit of RPM
476 distribution maintainers who might want to include rEFInd. It's a bit
477 rough, but it gets you a good chunk of the way there....
478
479 - The EFI filesystem drivers can now be built with the GNU-EFI toolkit as
480 well as with the TianoCore EDK2. See the BUILDING.txt file for details on
481 how to build them with either toolkit. This improvement doesn't affect
482 users of my binary packages, but it should make it easier for Linux
483 distributions to adopt rEFInd into their package systems.
484
485 - Tweaked refind.inf file for better build results using "native" TianoCore
486 EDK2 build process (vs. the Makefile-based build process that I use under
487 Linux). This won't affect those who use my binary builds or build under
488 Linux with the "make" command.
489
490 - Fixed bug that prevented Secure Boot launches from working when rEFInd
491 was built with GNU-EFI rather than the TianoCore EDK2.
492
493 - Substantial reworking of Secure Boot code, based on James Bottomley's
494 PreLoader program. This new code eliminates the limitation of launching
495 just one driver in Secure Boot mode and is likely to be more reliable
496 with future or obscure boot loaders. It should also work with non-x86-64
497 systems, although this relies on a platform-specific shim program, which
498 to date exists only for x86-64. The basic features are the same as before
499 -- rEFInd relies on shim for authentication functions and will launch
500 programs that are signed by Secure Boot keys, shim keys, or MOKs.
501
502 - Altered default for "textmode" option (when it's commented out) to not
503 adjust the text mode at all. (Prior versions set it to mode 0 by
504 default.)
505
506 0.6.1 (12/21/2012):
507 -------------------
508
509 - Added "--root" option to install.sh, to enable installation of rEFInd
510 to something other than the currently-running OS. This is intended for
511 use on emergency discs.
512
513 - Thanks to Stefan Agner, the ext4fs driver now supports the "meta_bg"
514 filesystem feature, which distributes metadata throughout the disk. This
515 feature isn't used by default, but can be set at filesystem creation time
516 by passing the "-O meta_bg,^resize_inode" option to mke2fs. (Using
517 "^resize_inode" is necessary because meta_bg is incompatible with
518 resize_inode, which IS used by default.) This feature can be used on
519 ext3fs and ext2fs as well as on ext4fs, so the ext4fs driver can now
520 handle some ext3fs and ext2fs partitions that the ext2fs driver can't
521 handle.
522
523 - Fixed some screen resolution-setting bugs.
524
525 - Added the "words" that make up a filesystem's label (delimited by spaces,
526 dashes, or underscores) to the list of bases used to search for OS icons.
527 For instance, if the filesystem's label is "Arch", rEFInd searches for
528 os_Arch.icns; if it's "Fedora 17", it searches for os_Fedora.icns and
529 os_17.icns; and if it's "NEW_GENTOO", it searches for os_NEW.icns and
530 os_GENTOO.icns.
531
532 - Refined hints displays to be more context-sensitive, particularly in text
533 mode.
534
535 - Instead of displaying a blank filesystem label when a filesystem has
536 none, rEFInd now displays the size and/or type of the filesystem, as in
537 "boot EFI\foo\bar.efi from 200 MiB ext3 volume" rather than "boot
538 EFI\foo\bar.efi from".
539
540 - Fixed a bug that caused the screen to clear after displaying an error
541 message but before displaying the "Hit any key to continue" message when
542 a boot loader launch failed.
543
544 0.6.0 (12/16/2012):
545 -------------------
546
547 - Fixed a memory allocation bug that could cause a program crash when
548 specifying certain values with the "also_scan_dirs", "dont_scan_volumes",
549 "dont_scan_dirs", "dont_scan_files", and "scan_driver_dirs" refind.conf
550 options.
551
552 - Modified Linux kernel initrd-finding code so that if an initrd is
553 specified in refind_linux.conf, rEFInd will not add any initrd it finds.
554 This enables an override of the default initrd, and is likely to be
555 particularly helpful to Arch Linux users.
556
557 - Added ext4fs driver!
558
559 - Made "boot" the default value for "also_scan_dirs".
560
561 - Added identifying screen header to line editor.
562
563 - Fixed bug that caused rEFInd's display to be mis-sized upon return
564 from a program that set the resolution itself.
565
566 - Adjusted "resolution" refind.conf parameter so that it can accept EITHER
567 a resolution as width and height OR a single digit as a UEFI mode number
568 (which is system-specific). This is done because some systems present the
569 same mode twice in their mode lists, perhaps varying in refresh rate,
570 monitor output, or some other salient characteristics; specifying the
571 mode number enables selecting the higher-numbered mode, whereas using
572 horizontal and vertical resolution values selects the lowest-numbered
573 mode.
574
575 - Added "textmode" refind.conf parameter to set the text mode used in
576 text-only displays, and for the line editor and boot-time handoff
577 display even in graphics mode.
578
579 - Fixed bug that caused tools (shell, etc.) to launch when they were
580 highlighted and F2 or Insert was pressed.
581
582 - Added "editor" option to the "hideui" token in refind.conf, which
583 disables the boot options editor.
584
585 - Added hints text to rEFInd main menu and sub-menus. This can be disabled
586 by setting the new "hints" option to the "hideui" token in refind.conf.
587
588 - Added "boot with minimal options" entry to refind_linux.conf file
589 generated by install.sh. This entry boots without the options extracted
590 from the /etc/default/grub file.
591
592 - Added keys subdirectory to main distribution, to hold public Secure
593 Boot/shim keys from known sources.
594
595 - Changed install.sh --drivers option to --alldrivers, added new
596 --nodrivers option, and made the default on Linux to install the one
597 driver that's used on /boot (or the root filesystem if /boot isn't a
598 separate partition). Of course, this won't install a non-existent driver,
599 and it also won't work properly if run from an emergency disk unless you
600 mount a separate /boot partition at that location.
601
602 - Fixed bug in install.sh that prevented creation of refind_linux.conf file
603 on Linux systems.
604
605 0.5.1.1 (12/12/2012):
606 ---------------------
607
608 - Fixed bug in install.sh that prevented it from working on OS X.
609
610 0.5.1 (12/11/2012):
611 -------------------
612
613 - Added support for "0" options to "textonly" and "scan_all_linux_kernels"
614 to reverse the usual meaning of these tokens. This is useful for
615 including these options in a secondary configuration file called with the
616 new "include" token to override a setting set in the main file.
617
618 - Added "include" token for refind.conf, to enable including a secondary
619 configuration file from a primary one.
620
621 - Modified install.sh so that it creates a simple refind_linux.conf file in
622 /boot, if that file doesn't already exist and if install.sh is run from
623 Linux. If that directory happens to be on a FAT, HFS+, ext2fs, ext3fs, or
624 ReiserFS volume, and if the necessary drivers are installed, the result
625 is that rEFInd will detect the Linux installation with no further
626 configuration on many systems. (Some may still require tweaking of kernel
627 options, though; for instance, adding "dolvm" on Gentoo systems that use
628 LVM.)
629
630 - Added --shim and --localkeys options to install.sh to help simplify setup
631 on systems with Secure Boot active.
632
633 - Fixed (maybe) bug that caused resolution options to not be displayed on
634 recent Macs with GOP graphics when specifying an invalid resolution in
635 refind.conf.
636
637 - Fixed bug that caused some programs (EFI shells, in particular) to hang
638 when launching on some systems (DUET, in particular).
639
640 - Implemented a fix to enable ELILO to launch with Secure Boot active.
641 This fix might help with some other boot loaders in Secure Boot mode,
642 too, but I don't know of any specifics.
643
644 0.5.0 (12/6/2012):
645 ------------------
646
647 - Added the ability to include quote marks ('"') in refind.conf and
648 refind_linux.conf tokens by doubling them up, as in:
649 "ro root=/dev/sda4 some_value=""this is it"""
650 This example results in the following string being passed as an
651 option:
652 ro root=/dev/sda4 some_value="this is it"
653
654 - Changed refind.conf-sample to uncomment the scan_all_linux_kernels
655 option by default. If this option is deleted or commented out, the
656 program default remains to not scan all Linux kernels; but with
657 increasing numbers of distributions shipping with kernels that include
658 EFI stub loader support, setting the configuration file default to scan
659 for them makes sense.
660
661 - Modified the "resolution" token so that it affects text mode as well
662 as graphics mode. On my systems, though, the actual text area is still
663 restricted to an 80x25 area. (This seems to be a firmware limitation; my
664 EFI shells are also so limited.)
665
666 - Fixed a bug that caused the options line editor to blank out lines that
667 were not actually edited.
668
669 - Added support for using Matthew Garrett's Shim program and its Machine
670 Owner Keys (MOKs) to extend Secure Boot capabilities. If rEFInd is
671 launched from Shim on a computer with Secure Boot active, rEFInd will
672 launch programs signed with either a standard UEFI Secure Boot key or a
673 MOK. For the moment, this feature works only on x86-64 systems.
674
675 - Added new "dont_scan_files" (aka "don't_scan_files") token for
676 refind.conf. The effect is similar to dont_scan_dirs, but it creates a
677 blacklist of filenames within directories rather than directory names.
678 I'm initially using it to place shim.efi and MokManager.efi in the
679 blacklist to keep these programs out of the OS list. (MokManager.efi is
680 scanned separately as a tool; see below.) I've moved checks for
681 ebounce.efi, GraphicsConsole.efi, and TextMode.efi to this list. (These
682 three had previously been blacklisted by hard-coding in ScanLoaderDir().)
683
684 - Added the directory from which rEFInd launched to dont_scan_dirs. This
685 works around a bug in which rEFInd would show itself as a bogus Windows
686 entry if it's installed as EFI/Microsoft/boot/bootmgfw.efi.
687
688 - Added support for launching MokManager.efi for managing the Machine Owner
689 Keys (MOKs) maintained by the shim boot loader developed by Fedora and
690 SUSE. This program is scanned and presented as a second-row tool.
691
692 - Added support for Apple's Recovery HD partition: If it's detected, a new
693 icon appears on the second row. This icon can be removed by explicitly
694 setting the "showtools" option in refind.conf and excluding the
695 "apple_recovery" option from that line.
696
697 - Fixed bug that caused text-mode ("textonly" refind.conf option enabled)
698 menu entries to be right-aligned rather than left-aligned when rEFInd was
699 compiled with the TianoCore EDK2.
700
701 - Added "--usedefault {devicename}" and "--drivers" options to the
702 install.sh script and changed the "esp" option to "--esp".
703
704 0.4.7 (11/6/2012):
705 ------------------
706
707 - Added an icon for gummiboot.
708
709 - Added a boot option editor: Pressing the Insert or F2 key from a boot
710 tag's options menu opens a simple text-mode line editor on which the boot
711 options may be edited for a one-time boot with altered options.
712
713 - Modified the "scan_delay" feature to delay and then perform a re-scan,
714 which may work better than the first attempt at this feature (which I'm
715 told isn't working as planned).
716
717 - Modified rEFInd to add a space after the command-line options only when
718 launching Mac OS X. On some early Macs, the extra space (which had been
719 present by default, as a carryover from rEFIt) causes problems when
720 booting Linux kernels from FAT partitions.
721
722 0.4.6 (10/6/2012):
723 ------------------
724
725 - Fixed some minor memory management issues.
726
727 - Added new "scan_delay" feature to impose a delay before scanning
728 for disks.
729
730 - Changed default "scanfor" option from internal-external-optical to either
731 internal-external-optical-manual (for non-Macs) or
732 internal-hdbios-external-biosexternal-optical-cd-manual (for Macs). I've
733 done this for two reasons:
734 - Many Mac users have been confused by the fact that rEFInd needs
735 reconfiguration to detect Windows (or Linux installed in BIOS mode),
736 since rEFIt scans BIOS devices by default. Adding the BIOS options as
737 default for them should help them.
738 - Adding the "manual" option enables users to simply add manual boot
739 stanzas and have them work, which is more intuitive. Adding the
740 "manual" option will have no effect unless manual stanzas are created
741 or uncommented, so this part of the change won't affect users' working
742 default configurations.
743
744 - Added new legacy (BIOS) boot support for UEFI-based PCs.
745
746 0.4.5 (8/12/2012):
747 ------------------
748
749 - Fixed bug that caused a failure to boot BIOS-based OSes on Macs.
750
751 - Fixed bug in install.sh that caused it to fail to detect rEFItBlesser.
752
753 0.4.4 (6/23/2012):
754 ------------------
755
756 - Fixed bug that caused filesystem labels to be corrupted by rEFInd on
757 32-bit systems.
758
759 - Fixed bug that caused filesystem labels to be truncated in the drivers
760 on 32-bit systems.
761
762 - Fixed bug in use_graphics_for option parsing that caused most options
763 to set graphics mode for OS X and/or Linux but not other boot
764 loaders/OSes.
765
766 - Tweaked install script to better isolate the ESP under OS X.
767
768 0.4.3 (6/21/2012):
769 ------------------
770
771 - rEFInd now supports compilation using the TianoCore UDK2010/EDK2
772 development kit in addition to GNU-EFI.
773
774 - Added new "use_graphics_for" option to control which OSes to boot in
775 graphics mode. (This effect lasts for a fraction of a second on most
776 systems, since the boot loader that rEFInd launches is likely to set
777 graphics or text mode itself.)
778
779 - Graphics-mode booting now clears the screen to the current rEFInd
780 background color (rather than black) and does NOT display boot messages.
781 The intent is for a smoother transition when booting OS X, or perhaps
782 other OSes that don't display boot loader messages. In practice, this
783 effect will be tiny for many OSes, since the boot loader generally clears
784 the screen within a fraction of a second of being launched; but the
785 "flicker" of a rEFInd message in that time can sometimes be distracting.
786
787 - Filesystem drivers now work on EFI 1.x systems, such as Macs.
788
789 - Removed "linux.conf" as a valid alternative name for "refind_linux.conf"
790 for holding Linux kernel options. The kernel developers plan to use
791 "linux.conf" themselves.
792
793 0.4.2 (6/3/2012):
794 -----------------
795
796 - Added a message to install.sh when run on Macs to remind users to update
797 the "scanfor" line in refind.conf if they need to boot BIOS-based OSes
798 via rEFInd.
799
800 - Modified install.sh script to be smarter about running efibootmgr on
801 Linux. It now uses the whole path to the rEFInd binary as a key to
802 determine whether an existing entry exists, rather than just the filename
803 portion. If an entry exists and is the first entry in the boot order, the
804 script does nothing to the NVRAM entries. If such an entry exists but is
805 not the default, the script deletes that entry and creates a new one
806 (implicitly making it the first in the boot order). If such an entry does
807 not exist, the script creates a new one (again, making it the first in
808 the boot order).
809
810 - Added "dont_scan_dirs" configuration file option, which adds directories
811 to a "blacklist" of directories that are NOT scanned for boot loaders.
812
813 0.4.1 (5/25/2012):
814 ------------------
815
816 - Added "scanning for new boot loaders" message to the re-scan function
817 (hitting Esc at the main menu). It usually flashes up too quickly to
818 be of importance, but if the scan function takes a while because of
819 access to a CD that must be spun up, it should make it clear that the
820 system hasn't hung.
821
822 - Modified install.sh script to detect rEFItBlesser on Macs, and if
823 present, to ask the user if it should be removed.
824
825 - Cleaned up the Make.common file for the filesystem drivers.
826
827 - Changed HFS+ driver to return volume label of "HFS+ volume" rather than
828 an empty label. (The driver doesn't currently read the real volume
829 label.)
830
831 - Fixed bug that could cause rEFInd to appear in its own menu after
832 running a shell and then re-scanning for boot loaders.
833
834 0.4.0 (5/20/2012):
835 ------------------
836
837 - Inclusion of drivers for ISO-9660, HFS+, ReiserFS, and ext2fs. Most of
838 these drivers originated with rEFIt, although the HFS+ driver seems to
839 have come from Oracle's VirtualBox, with some files from Apple. I hadn't
840 included these drivers previously because the build process proved
841 challenging. As it is, they don't work on my Mac Mini, I suspect because
842 the build process with the UDK2010 development kit may not work with the
843 EFI 1.x that Apple uses.
844
845 - Addition of support for drivers in the "drivers_{arch}" subdirectory of
846 the main rEFInd binary directory (e.g., "drivers_x64" or "drivers_ia32").
847 Drivers may continue to be placed in the "drivers" subdirectory.
848
849 - Added new feature to eject CDs (and other removable media): Press F12 to
850 eject all such media. This function works only on some Macs, though (it
851 relies on an Apple-specific EFI extension, and this extension isn't even
852 implemented on all Macs, much less on UEFI-based PCs).
853
854 - Fixed a problem that could cause GRUB 2 to fail to read its configuration
855 file when launched from rEFInd.
856
857 0.3.5 (5/15/2012):
858 ------------------
859
860 - Removed the GRUB 2 detection "reciped" added with 0.3.2, since I've
861 received reports that it's not working as intended.
862
863 - Added re-scan feature: Press the Esc key to have rEFInd re-read its
864 configuration file, tell the EFI to scan for new filesystems, and re-scan
865 those filesystems for boot loaders. The main purpose is to enable
866 scanning a new removable medium that you insert after launching rEFInd;
867 however, it can also be used to immediately implement changes to the
868 configuration file or new drivers you load from an EFI shell.
869
870 - Fixed a bug that could cause the scroll-right arrow to be replaced by the
871 scroll-left arrow under some circumstances.
872
873 0.3.4 (5/9/2012):
874 -----------------
875
876 - Added new configuration file option: "icons_dir", which sets the name
877 of the subdirectory in which icons are found. See the documentation or
878 sample configuration file for a full description.
879
880 - Modified Makefile to generate rEFInd binary that includes architecture
881 code -- refind_ia32.efi or refind_x64.efi, rather than the generic
882 refind.efi. This is done mainly to help the install.sh script. The
883 program can be named anything you like on the disk. (The generic name
884 refind.efi is used on unknown architectures.)
885
886 - Improved install.sh script: Fixed bug on OS X 10.7 and enable it to be
887 used after building from source code (or via new "make install" Makefile
888 target).
889
890 - Improved screen redraws to produce less flicker when moving among the
891 second-row tags or to the last tag on the first row.
892
893 0.3.3 (5/6/2012):
894 -----------------
895
896 - Improved menu navigation:
897 - In graphics mode, left & right arrow keys move left & right, while up &
898 down arrows move between rows.
899 - Page Up and Page Down now move through chunks of visible tags (in both
900 text & graphics modes), jumping from one row to another only when at
901 the edge of the row. In text mode, the "rows" are broken down as in
902 graphics mode, but they aren't visibly distinguished on the screen.
903
904 - Improved text-mode use: rEFInd now displays the proper number of entries
905 when first started in text mode and scrolling is done sensibly when too
906 many entries exist to fit on the screen.
907
908 0.3.2 (5/4/2012):
909 -----------------
910
911 - Added the install.sh script to install rEFInd on Linux and Mac OS X
912 systems. This script must be run as root (or via sudo). It requires
913 no options, but on Mac OS X, passing it the "esp" option causes it
914 to install rEFInd on the computer's ESP rather than the default of the
915 currently OS X boot partition. (Under Linux, the default is to install to
916 the ESP.) Note that there may be some unusual cases in which this script
917 will fail to work.
918
919 - Does a better job of clearing the screen when launching OSes in text
920 mode.
921
922 - Added detection "recipe" for GRUB 2's BIOS Boot Partition.
923
924 - Fixed bogus detection of ESPs created by Linux's mkdosfs utility or
925 Windows as bootable partitions when "scanfor" includes BIOS scanning
926 options.
927
928
929 0.3.1 (4/27/2012):
930 ------------------
931
932 - Fixed bug that caused spurious "Unsupported while scanning the root
933 directory" messages under some conitions on Macs.
934
935 - Modified loader scanning code to sort boot loader entries within a
936 directory by modification time, so that the most recently-modified loader
937 is first among those in a given directory. Thus, if you specify a
938 directory name (or volume name, for loaders stored in the root directory
939 of a volume) as the default_selection, the most recent of those loaders
940 will be the default. This is intended to help with Linux kernel
941 maintenance when using the EFI stub loader; set up this way, the most
942 recent kernel copied to your kernel directory will be the default,
943 obviating the need to adjust the refind.conf file when adding a new
944 kernel. If you want to change the default among those in the default
945 directory, you can use "touch" to adjust the modification timestamp.
946
947 - Tweaked code to find loader-specific .icns file so that it finds files
948 for Linux kernels without .efi extensions. In this case, files should be
949 named the same as the kernels they match, but with .icns extensions. For
950 instance, bzImage-3.3.2 should have an icon called bzImage-3.3.2.icns.
951 (The old code would have looked for an icon called bzImage-3.3.icns.)
952
953 - Eliminated bogus OS loader tags for filenames that end in ".icns" when
954 the scan_all_linux_kernels option is set.
955
956 0.3.0 (4/22/2012):
957 ------------------
958
959 - I'm officially upgrading this project's status from "alpha" to "beta" and
960 giving it a bump from 0.2.x to 0.3.0. This doesn't reflect any major
961 milestone with this version; rather, it reflects my sense that rEFInd has
962 been "out there" for a while, and although I've gotten bug reports,
963 they've been minor and/or have been fixed. The program still has known
964 bugs, but my impression is that it is, overall, usable by ordinary users.
965
966 - Added "resolution" option to refind.conf, which enables setting the video
967 resolution. To use it, pass two numeric values, as in "resolution 1024
968 768" to use a 1024x768 video mode. Note that not all modes are supported.
969 If you specify a non-supported video mode on a UEFI system, a message
970 appears listing the supported video modes and you must then press a key
971 to continue, using the default video mode (usually 800x600).
972 Unfortunately, I don't know the calls to get a list of supported video
973 modes on older EFI 1.x systems (including Macs), so on Macs setting an
974 incorrect video mode silently fails (you keep using the default mode).
975 This makes changing your video mode a hit-or-miss proposition on Macs.
976 CAUTION: It's possible to set a legal video mode that your monitor can't
977 handle, in which case you'll get a blank display until you boot an OS
978 that resets the video mode.
979
980 - Fixed (maybe) a bug that caused rEFInd to crash when returning from an
981 EFI shell or other programs on Macs, particularly when rEFInd used
982 graphical mode. I'm not 100% sure this bug is squashed because I still
983 don't understand the cause and I only have one Mac for testing. See
984 comments in the ReinitRefitLib() function in refit/lib.c for more
985 details.
986
987 - Added new refind.conf option: scan_all_linux_kernels, which causes Linux
988 kernels that lack ".efi" extensions to be included in scans for EFI boot
989 loaders. This may help integration with Linux distributions that don't
990 give their kernels such names by default. Beware, though: It can detect
991 unwanted files, such as older non-stub-loader kernels or .icns files used
992 to give kernels with .efi extensions custom icons.
993
994 - Improved EFI boot loader detection on boards with Gigabyte's Hybrid EFI,
995 and perhaps other EFIs with a buggy StriCmp() function. Files with both
996 ".efi" and ".EFI" extensions should now be detected as boot loaders.
997
998 - Fixed a bug that caused rEFInd to fail to scan for drivers if the
999 filesystem driver didn't set a volume name (that is, if the relevant
1000 field was set to NULL rather than even an empty string). In such
1001 situations, rEFInd now reports the volume name as "Unknown".
1002
1003 0.2.7 (4/19/2012):
1004 ------------------
1005
1006 - After much trial and tribulation, I've overcome a GNU-EFI limitation and
1007 enabled rEFInd to load EFI drivers. This feature was present in the
1008 original build of rEFIt but was removed in the versions that could
1009 compile under Linux, but now it's back -- and still being compiled under
1010 Linux! To use it, you should place your drivers in a convenient directory
1011 on the ESP (or whatever partition you use to launch rEFInd) and add a
1012 "scan_driver_dirs" entry to refind.conf to tell rEFInd where to look. (As
1013 always, you should specify the driver directory relative to the root of
1014 the filesystem.) Note that you can't launch drivers from another
1015 filesystem; they must be on the same volume that holds rEFInd. Those who
1016 compile from source code should note that implementing this feature
1017 necessitated using a more recent version of the GNU-EFI library. I'm
1018 currently using version 3.0p, and version 3.0i does NOT work. I don't
1019 know where the change occurred, but you may need to upgrade your GNU-EFI
1020 installation.
1021
1022 - Fixed bug that caused rEFInd to show up in its own menu sometimes.
1023
1024 - Added new refind.conf token: also_scan_dirs. When scanning volumes for
1025 EFI boot loaders, rEFInd always scans the root directory and every
1026 subdirectory of the /EFI directory, but it doesn't recurse into these
1027 directories. The also_scan_dirs token adds more directories to the scan
1028 list. It defaults to "elilo,boot", but you can set it to any directory or
1029 directories you like.
1030
1031 0.2.6 (4/14/2012):
1032 ------------------
1033
1034 - Added "volume" keyword to configuration file's stanza options. This
1035 option changes the volume from which subsequent files (specified by
1036 "loader" and "icon") are loaded. You pass "volume" the name/label of the
1037 FILESYSTEM you want to use (not the GPT partition name), or a number
1038 followed by a colon (e.g., "1:"). The former should reliably identify a
1039 filesystem, assuming the name is unique. The latter assigns numbers based
1040 on the order in which they're scanned, which may not be as reliable but
1041 should work when a volume is unnamed.
1042
1043 - Fixed bug in 0.2.5 that caused failure of Linux initial RAM disk
1044 mapping on some (but not all) systems. Affected computers include at
1045 least some Intel motherboards, maybe others.
1046
1047 0.2.5 (4/9/2012):
1048 -----------------
1049
1050 - Fixed bug that caused an inability to associate initial RAM disks with
1051 Linux kernels stored in a volume's root directory.
1052
1053 - Volume badges (that override default badges) are now stored in
1054 .VolumeBadge.icns. Although undocumented, rEFInd formerly loaded custom
1055 volume badges from .VolumeIcon.icns. This carryover from rEFIt was a
1056 confusing name, given the next (new) feature, so I've changed and
1057 documented the name....
1058
1059 - Added ability to set a default icon for a loader stored in the root
1060 directory of a volume: The icon is stored in .VolumeIcon.icns. This icon
1061 is also used for Mac OS X volumes booted from the standard location.
1062
1063 - Fixed bug that caused icons to drop back to generic icons when rEFInd
1064 was launched in certain ways (such as from an EFI shell in rEFInd's
1065 directory) on certain systems.
1066
1067 - Fixed bug that caused "unknown disable flag" to be shown (very briefly)
1068 instead of "unknown hideui flag" when an improper hideui flag was set.
1069
1070 0.2.4 (4/5/2012):
1071 -----------------
1072
1073 - Created new refind.conf entry: "showtools". This entry takes options of
1074 "shell", "gptsync", "about", "exit", "reboot", and "shutdown". This
1075 option is in some respects an affirmative version of portions of the old
1076 "disable" and "hideui" options; however, it enables users to specify the
1077 order in which these options appear on the screen. Also, the "exit"
1078 option is new; it terminates the program. The effect is usually to return
1079 to whatever tool launched it or to launch a default OS; however, this is
1080 somewhat unpredictable. The default therefore omits the "exit" option, as
1081 well as "gptsync", which has always been dangerous (but necessary on most
1082 MacOS/Windows dual-boot setups on Macs). As part of this reconfiguration,
1083 I've eliminated the "rescue Linux" option, which always seemed pointless
1084 to me.
1085
1086 - Folded "disable" and "hideui" refind.conf entries into one ("disable"),
1087 and reduced the number of options to six: "banner", "label",
1088 "singleuser", "hwtest", "arrows", and "all". ("arrows" is new and
1089 disables the scroll arrows when a system has too many tags to display
1090 simultaneously.)
1091
1092 - Added max_tags option to the refind.conf file, enabling users to reduce
1093 the maximum number of OS loader tags that can be displayed at once.
1094
1095 - Updated rEFIt icon, based on the 128x128 volume label from the rEFIt CD
1096 image.
1097
1098 - Added x86 and x86-64 EFI shells to the CD image version of the binary,
1099 but NOT to the binary zip file. The logic is that the CD image is more
1100 likely to be used directly as an emergency disc and so may need this
1101 feature, even though the source isn't part of the rEFInd project. (The
1102 source is readily available from the TianoCore project.)
1103
1104 - EFI shells may now be stored at /shellx64.efi for x86-64 systems or at
1105 /shellia32.efi for x86 systems. The /EFI/tools/shell.efi name is also
1106 recognized; however, if both files are present, two EFI shell icons will
1107 appear on the main menu. The /efi/{refind-path/apps/shell.efi filename,
1108 which was never officially documented but worked as a carryover from
1109 rEFIt, is no longer valid.
1110
1111 0.2.3 (3/26/2012):
1112 ------------------
1113
1114 - Fixed (maybe) a bug that caused hangs when launching a second program
1115 after returning from a first. There are some weird system-to-system
1116 differences, though, and this fix causes (apparently harmless) error
1117 messages about "(re)opening our installation volume" on at least one
1118 system (a 32-bit Mac Mini). I'm committing this change because, imperfect
1119 though it is, it's preferable to the earlier version, at least on my
1120 small sample of computers.
1121
1122 - Because of news that the Linux kernel developers are planning to use the
1123 filename linux.conf to hold Linux kernel configuration data for EFI
1124 booting, I'm transitioning rEFInd away from that name and to
1125 refind_linux.conf to avoid a conflict. This version can use either name,
1126 with refind_linux.conf taking precedence if both are present.
1127
1128 - Added logo for Arch Linux.
1129
1130 0.2.2 (3/23/2012):
1131 ------------------
1132
1133 - Fixed bug that caused program failure when Linux kernels with EFI stub
1134 support were detected with no associated version numbers. rEFInd now
1135 permits automatic linking of *ONE* versionless kernel to *ONE*
1136 versionless initrd file.
1137
1138 - Fixed bug that caused program hangs when a boot loader filename or label
1139 was too long. Such names are now properly truncated and program execution
1140 continues.
1141
1142 - Fixed bug that caused no text to appear in submenus on UEFI systems with
1143 small screens (800x600). NOTE: Problem still occurs on screens smaller
1144 than this, but such systems are very rare.
1145
1146 0.2.1 (3/19/2012):
1147 ------------------
1148
1149 - Added ability to set a "default_selection" that's a title or a substring
1150 of one -- the name given to a stanza in a "menuentry" or the boot
1151 loader's filename, in most cases, although "Mac OS X", "Windows XP
1152 (XoM)", and "Microsoft EFI boot" are also titles.
1153
1154 - Added support for semi-automatic scans of Linux kernels with EFI stub
1155 loader support. The program auto-detects matching initial RAM disk files
1156 and loads additional options from the "linux.conf" file in the same
1157 directory as the kernel.
1158
1159 - Added support for "submenuentry" keyword and associated sub-stanza
1160 entries in refind.conf file.
1161
1162 - Renamed icons/os_mint.icns to icons/os_linuxmint.icns to match the
1163 filename Linux Mint ACTUALLY uses for its ESP boot loader directory.
1164
1165
1166 0.2.0 (3/14/2012):
1167 ------------------
1168
1169 - Initial public release