Fixed uninitialized-pointer bug that manifested as a crash with
[refind] / refind.conf-sample
1 #
2 # refind.conf
3 # Configuration file for the rEFInd boot menu
4 #
5
6 # Timeout in seconds for the main menu screen. Setting the timeout to 0
7 # disables automatic booting (i.e., no timeout). Setting it to -1 causes
8 # an immediate boot to the default OS *UNLESS* a keypress is in the buffer
9 # when rEFInd launches, in which case that keypress is interpreted as a
10 # shortcut key. If no matching shortcut is found, rEFInd displays its
11 # menu with no timeout.
12 #
13 timeout 20
14
15 # Screen saver timeout; the screen blanks after the specified number of
16 # seconds with no keyboard input. The screen returns after most keypresses
17 # (unfortunately, not including modifier keys such as Shift, Control, Alt,
18 # or Option). Setting a value of "-1" causes rEFInd to start up with its
19 # screen saver active. The default is 0, which disables the screen saver.
20 #screensaver 300
21
22 # Hide user interface elements for personal preference or to increase
23 # security:
24 # banner - the rEFInd title banner (built-in or loaded via "banner")
25 # label - boot option text label in the menu
26 # singleuser - remove the submenu options to boot Mac OS X in single-user
27 # or verbose modes; affects ONLY MacOS X
28 # safemode - remove the submenu option to boot Mac OS X in "safe mode"
29 # hwtest - the submenu option to run Apple's hardware test
30 # arrows - scroll arrows on the OS selection tag line
31 # hints - brief command summary in the menu
32 # editor - the options editor (+, F2, or Insert on boot options menu)
33 # badges - device-type badges for boot options
34 # all - all of the above
35 # Default is none of these (all elements active)
36 #
37 #hideui singleuser
38 #hideui all
39
40 # Set the name of a subdirectory in which icons are stored. Icons must
41 # have the same names they have in the standard directory. The directory
42 # name is specified relative to the main rEFInd binary's directory. If
43 # an icon can't be found in the specified directory, an attempt is made
44 # to load it from the default directory; thus, you can replace just some
45 # icons in your own directory and rely on the default for others.
46 # Default is "icons".
47 #
48 #icons_dir myicons
49 #icons_dir icons/snowy
50
51 # Use a custom title banner instead of the rEFInd icon and name. The file
52 # path is relative to the directory where refind.efi is located. The color
53 # in the top left corner of the image is used as the background color
54 # for the menu screens. Currently uncompressed BMP images with color
55 # depths of 24, 8, 4 or 1 bits are supported, as well as PNG images.
56 #
57 #banner hostname.bmp
58 #banner mybanner.png
59 #banner icons/snowy/banner-snowy.png
60
61 # Specify how to handle banners that aren't exactly the same as the screen
62 # size:
63 # noscale - Crop if too big, show with border if too small
64 # fillscreen - Fill the screen
65 # Default is noscale
66 #
67 #banner_scale fillscreen
68
69 # Icon sizes. All icons are square, so just one value is specified. The
70 # big icons are used for OS selectors in the first row and the small
71 # icons are used for tools on the second row. Drive-type badges are 1/4
72 # the size of the big icons. Legal values are 32 and above. If the icon
73 # files do not hold icons of the proper size, the icons are scaled to
74 # the specified size. The default values are 48 and 128 for small and
75 # big icons, respectively.
76 #
77 #small_icon_size 96
78 #big_icon_size 256
79
80 # Custom images for the selection background. There is a big one (144 x 144)
81 # for the OS icons, and a small one (64 x 64) for the function icons in the
82 # second row. If only a small image is given, that one is also used for
83 # the big icons by stretching it in the middle. If only a big one is given,
84 # the built-in default will be used for the small icons.
85 #
86 # Like the banner option above, these options take a filename of an
87 # uncompressed BMP image file with a color depth of 24, 8, 4, or 1 bits,
88 # or a PNG image. The PNG format is required if you need transparency
89 # support (to let you "see through" to a full-screen banner).
90 #
91 #selection_big selection-big.bmp
92 #selection_small selection-small.bmp
93
94 # Set the font to be used for all textual displays in graphics mode.
95 # The font must be a PNG file with alpha channel transparency. It must
96 # contain ASCII characters 32-126 (space through tilde), inclusive, plus
97 # a glyph to be displayed in place of characters outside of this range,
98 # for a total of 96 glyphs. Only monospaced fonts are supported. Fonts
99 # may be of any size, although large fonts can produce display
100 # irregularities.
101 # The default is rEFInd's built-in font, Luxi Mono Regular 12 point.
102 #
103 #font myfont.png
104
105 # Use text mode only. When enabled, this option forces rEFInd into text mode.
106 # Passing this option a "0" value causes graphics mode to be used. Pasing
107 # it no value or any non-0 value causes text mode to be used.
108 # Default is to use graphics mode.
109 #
110 #textonly
111
112 # Set the EFI text mode to be used for textual displays. This option
113 # takes a single digit that refers to a mode number. Mode 0 is normally
114 # 80x25, 1 is sometimes 80x50, and higher numbers are system-specific
115 # modes. Mode 1024 is a special code that tells rEFInd to not set the
116 # text mode; it uses whatever was in use when the program was launched.
117 # If you specify an invalid mode, rEFInd pauses during boot to inform
118 # you of valid modes.
119 # CAUTION: On VirtualBox, and perhaps on some real computers, specifying
120 # a text mode and uncommenting the "textonly" option while NOT specifying
121 # a resolution can result in an unusable display in the booted OS.
122 # Default is 1024 (no change)
123 #
124 #textmode 2
125
126 # Set the screen's video resolution. Pass this option either:
127 # * two values, corresponding to the X and Y resolutions
128 # * one value, corresponding to a GOP (UEFI) video mode
129 # Note that not all resolutions are supported. On UEFI systems, passing
130 # an incorrect value results in a message being shown on the screen to
131 # that effect, along with a list of supported modes. On EFI 1.x systems
132 # (e.g., Macintoshes), setting an incorrect mode silently fails. On both
133 # types of systems, setting an incorrect resolution results in the default
134 # resolution being used. A resolution of 1024x768 usually works, but higher
135 # values often don't.
136 # Default is "0 0" (use the system default resolution, usually 800x600).
137 #
138 #resolution 1024 768
139 #resolution 1440 900
140 #resolution 3
141
142 # Enable touch screen support. If active, this feature enables use of
143 # touch screen controls (as on tablets). Note, however, that not all
144 # tablets' EFIs provide the necessary underlying support, so this
145 # feature may not work for you. If it does work, you should be able
146 # to launch an OS or tool by touching it. In a submenu, touching
147 # anywhere launches the currently-selection item; there is, at present,
148 # no way to select a specific submenu item.
149 #
150 #enable_touch
151
152 # Launch specified OSes in graphics mode. By default, rEFInd switches
153 # to text mode and displays basic pre-launch information when launching
154 # all OSes except OS X. Using graphics mode can produce a more seamless
155 # transition, but displays no information, which can make matters
156 # difficult if you must debug a problem. Also, on at least one known
157 # computer, using graphics mode prevents a crash when using the Linux
158 # kernel's EFI stub loader. You can specify an empty list to boot all
159 # OSes in text mode.
160 # Valid options:
161 # osx - Mac OS X
162 # linux - A Linux kernel with EFI stub loader
163 # elilo - The ELILO boot loader
164 # grub - The GRUB (Legacy or 2) boot loader
165 # windows - Microsoft Windows
166 # Default value: osx
167 #
168 #use_graphics_for osx,linux
169
170 # Which non-bootloader tools to show on the tools line, and in what
171 # order to display them:
172 # shell - the EFI shell (requires external program; see rEFInd
173 # documentation for details)
174 # memtest - the memtest86 program, in EFI/tools, EFI/memtest86,
175 # EFI/memtest, EFI/tools/memtest86, or EFI/tools/memtest
176 # gptsync - the (dangerous) gptsync.efi utility (requires external
177 # program; see rEFInd documentation for details)
178 # gdisk - the gdisk partitioning program
179 # apple_recovery - boots the Apple Recovery HD partition, if present
180 # windows_recovery - boots an OEM Windows recovery tool, if present
181 # (see also the windows_recovery_files option)
182 # mok_tool - makes available the Machine Owner Key (MOK) maintenance
183 # tool, MokManager.efi, used on Secure Boot systems
184 # csr_rotate - adjusts Apple System Integrity Protection (SIP)
185 # policy. Requires "csr_values" to be set.
186 # about - an "about this program" option
187 # exit - a tag to exit from rEFInd
188 # shutdown - shuts down the computer (a bug causes this to reboot
189 # many UEFI systems)
190 # reboot - a tag to reboot the computer
191 # firmware - a tag to reboot the computer into the firmware's
192 # user interface (ignored on older computers)
193 # fwupdate - a tag to update the firmware; launches the fwupx64.efi
194 # (or similar) program
195 # netboot - launch the ipxe.efi tool for network (PXE) booting
196 # Default is shell,memtest,gdisk,apple_recovery,windows_recovery,mok_tool,about,shutdown,reboot,firmware,fwupdate
197 #
198 #showtools shell, gdisk, memtest, mok_tool, apple_recovery, windows_recovery, about, reboot, exit, firmware, fwupdate
199
200 # Boot loaders that can launch a Windows restore or emergency system.
201 # These tend to be OEM-specific.
202 # Default is LRS_ESP:/EFI/Microsoft/Boot/LrsBootmgr.efi
203 #
204 #windows_recovery_files LRS_ESP:/EFI/Microsoft/Boot/LrsBootmgr.efi
205
206 # Directories in which to search for EFI drivers. These drivers can
207 # provide filesystem support, give access to hard disks on plug-in
208 # controllers, etc. In most cases none are needed, but if you add
209 # EFI drivers and you want rEFInd to automatically load them, you
210 # should specify one or more paths here. rEFInd always scans the
211 # "drivers" and "drivers_{arch}" subdirectories of its own installation
212 # directory (where "{arch}" is your architecture code); this option
213 # specifies ADDITIONAL directories to scan.
214 # Default is to scan no additional directories for EFI drivers
215 #
216 #scan_driver_dirs EFI/tools/drivers,drivers
217
218 # Which types of boot loaders to search, and in what order to display them:
219 # internal - internal EFI disk-based boot loaders
220 # external - external EFI disk-based boot loaders
221 # optical - EFI optical discs (CD, DVD, etc.)
222 # netboot - EFI network (PXE) boot options
223 # hdbios - BIOS disk-based boot loaders
224 # biosexternal - BIOS external boot loaders (USB, eSATA, etc.)
225 # cd - BIOS optical-disc boot loaders
226 # manual - use stanzas later in this configuration file
227 # Note that the legacy BIOS options require firmware support, which is
228 # not present on all computers.
229 # The netboot option is experimental and relies on the ipxe.efi and
230 # ipxe_discover.efi program files.
231 # On UEFI PCs, default is internal,external,optical,manual
232 # On Macs, default is internal,hdbios,external,biosexternal,optical,cd,manual
233 #
234 #scanfor internal,external,optical,manual
235
236 # By default, rEFInd relies on the UEFI firmware to detect BIOS-mode boot
237 # devices. This sometimes doesn't detect all the available devices, though.
238 # For these cases, uefi_deep_legacy_scan results in a forced scan and
239 # modification of NVRAM variables on each boot. Adding "0", "off", or
240 # "false" resets to the default value. This token has no effect on Macs or
241 # when no BIOS-mode options are set via scanfor.
242 # Default is unset (or "uefi_deep_legacy_scan false")
243 #
244 #uefi_deep_legacy_scan
245
246 # Delay for the specified number of seconds before scanning disks.
247 # This can help some users who find that some of their disks
248 # (usually external or optical discs) aren't detected initially,
249 # but are detected after pressing Esc.
250 # The default is 0.
251 #
252 #scan_delay 5
253
254 # When scanning volumes for EFI boot loaders, rEFInd always looks for
255 # Mac OS X's and Microsoft Windows' boot loaders in their normal locations,
256 # and scans the root directory and every subdirectory of the /EFI directory
257 # for additional boot loaders, but it doesn't recurse into these directories.
258 # The also_scan_dirs token adds more directories to the scan list.
259 # Directories are specified relative to the volume's root directory. This
260 # option applies to ALL the volumes that rEFInd scans UNLESS you include
261 # a volume name and colon before the directory name, as in "myvol:/somedir"
262 # to scan the somedir directory only on the filesystem named myvol. If a
263 # specified directory doesn't exist, it's ignored (no error condition
264 # results). The default is to scan the "boot" directory in addition to
265 # various hard-coded directories.
266 #
267 #also_scan_dirs boot,ESP2:EFI/linux/kernels
268
269 # Partitions (or whole disks, for legacy-mode boots) to omit from scans.
270 # For EFI-mode scans, you must specify a volume by its label, which you
271 # can obtain in an EFI shell by typing "vol", from Linux by typing
272 # "blkid /dev/{devicename}", or by examining the disk's label in various
273 # OSes' file browsers.
274 # For legacy-mode scans, you can specify any subset of the boot loader
275 # description shown when you highlight the option in rEFInd.
276 # The default is "LRS_ESP".
277 #
278 #dont_scan_volumes "Recovery HD"
279
280 # Directories that should NOT be scanned for boot loaders. By default,
281 # rEFInd doesn't scan its own directory, the EFI/tools directory, the
282 # EFI/memtest directory, the EFI/memtest86 directory, or the
283 # com.apple.recovery.boot directory. Using the dont_scan_dirs option
284 # enables you to "blacklist" other directories; but be sure to use "+"
285 # as the first element if you want to continue blacklisting existing
286 # directories. You might use this token to keep EFI/boot/bootx64.efi out
287 # of the menu if that's a duplicate of another boot loader or to exclude
288 # a directory that holds drivers or non-bootloader utilities provided by
289 # a hardware manufacturer. If a directory is listed both here and in
290 # also_scan_dirs, dont_scan_dirs takes precedence. Note that this
291 # blacklist applies to ALL the filesystems that rEFInd scans, not just
292 # the ESP, unless you precede the directory name by a filesystem name,
293 # as in "myvol:EFI/somedir" to exclude EFI/somedir from the scan on the
294 # myvol volume but not on other volumes.
295 #
296 #dont_scan_dirs ESP:/EFI/boot,EFI/Dell,EFI/memtest86
297
298 # Files that should NOT be included as EFI boot loaders (on the
299 # first line of the display). If you're using a boot loader that
300 # relies on support programs or drivers that are installed alongside
301 # the main binary or if you want to "blacklist" certain loaders by
302 # name rather than location, use this option. Note that this will
303 # NOT prevent certain binaries from showing up in the second-row
304 # set of tools. Most notably, various Secure Boot and recovery
305 # tools are present in this list, but may appear as second-row
306 # items.
307 # The file may be specified as a bare name (e.g., "notme.efi"), as
308 # a complete filename (e.g., "/EFI/somedir/notme.efi"), or as a
309 # complete filename with volume (e.g., "SOMEDISK:/EFI/somedir/notme.efi").
310 # The default is shim.efi,shim-fedora.efi,shimx64.efi,PreLoader.efi,
311 # TextMode.efi,ebounce.efi,GraphicsConsole.efi,MokManager.efi,HashTool.efi,
312 # HashTool-signed.efi,bootmgr.efi
313 #
314 #dont_scan_files shim.efi,MokManager.efi
315
316 # Scan for Linux kernels that lack a ".efi" filename extension. This is
317 # useful for better integration with Linux distributions that provide
318 # kernels with EFI stub loaders but that don't give those kernels filenames
319 # that end in ".efi", particularly if the kernels are stored on a
320 # filesystem that the EFI can read. When set to "1", "true", or "on", this
321 # option causes all files in scanned directories with names that begin with
322 # "vmlinuz" or "bzImage" to be included as loaders, even if they lack ".efi"
323 # extensions. Passing this option a "0", "false", or "off" value causes
324 # kernels without ".efi" extensions to NOT be scanned.
325 # Default is "true" -- to scan for kernels without ".efi" extensions.
326 #
327 #scan_all_linux_kernels false
328
329 # Combine all Linux kernels in a given directory into a single entry.
330 # When so set, the kernel with the most recent time stamp will be launched
331 # by default, and its filename will appear in the entry's description.
332 # To launch other kernels, the user must press F2 or Insert; alternate
333 # kernels then appear as options on the sub-menu.
334 # Default is "true" -- kernels are "folded" into a single menu entry.
335 #
336 #fold_linux_kernels false
337
338 # Set the maximum number of tags that can be displayed on the screen at
339 # any time. If more loaders are discovered than this value, rEFInd shows
340 # a subset in a scrolling list. If this value is set too high for the
341 # screen to handle, it's reduced to the value that the screen can manage.
342 # If this value is set to 0 (the default), it's adjusted to the number
343 # that the screen can handle.
344 #
345 #max_tags 0
346
347 # Set the default menu selection. The available arguments match the
348 # keyboard accelerators available within rEFInd. You may select the
349 # default loader using:
350 # - A digit between 1 and 9, in which case the Nth loader in the menu
351 # will be the default.
352 # - A "+" symbol at the start of the string, which refers to the most
353 # recently booted loader.
354 # - Any substring that corresponds to a portion of the loader's title
355 # (usually the OS's name, boot loader's path, or a volume or
356 # filesystem title).
357 # You may also specify multiple selectors by separating them with commas
358 # and enclosing the list in quotes. (The "+" option is only meaningful in
359 # this context.)
360 # If you follow the selector(s) with two times, in 24-hour format, the
361 # default will apply only between those times. The times are in the
362 # motherboard's time standard, whether that's UTC or local time, so if
363 # you use UTC, you'll need to adjust this from local time manually.
364 # Times may span midnight as in "23:30 00:30", which applies to 11:30 PM
365 # to 12:30 AM. You may specify multiple default_selection lines, in which
366 # case the last one to match takes precedence. Thus, you can set a main
367 # option without a time followed by one or more that include times to
368 # set different defaults for different times of day.
369 # The default behavior is to boot the previously-booted OS.
370 #
371 #default_selection 1
372 #default_selection Microsoft
373 #default_selection "+,bzImage,vmlinuz"
374 #default_selection Maintenance 23:30 2:00
375 #default_selection "Maintenance,OS X" 1:00 2:30
376
377 # Enable VMX bit and lock the CPU MSR if unlocked.
378 # On some Intel Apple computers, the firmware does not lock the MSR 0x3A.
379 # The symptom on Windows is Hyper-V not working even if the CPU
380 # meets the minimum requirements (HW assisted virtualization and SLAT)
381 # DO NOT SET THIS EXCEPT ON INTEL CPUs THAT SUPPORT VMX! See
382 # http://www.thomas-krenn.com/en/wiki/Activating_the_Intel_VT_Virtualization_Feature!
383 # for more on this subject.
384 # The default is false: Don't try to enable and lock the MSR.
385 #
386 #enable_and_lock_vmx false
387
388 # Tell a Mac's EFI that OS X is about to be launched, even when it's not.
389 # This option causes some Macs to initialize their hardware differently than
390 # when a third-party OS is launched normally. In some cases (particularly on
391 # Macs with multiple video cards), using this option can cause hardware to
392 # work that would not otherwise work. On the other hand, using this option
393 # when it is not necessary can cause hardware (such as keyboards and mice) to
394 # become inaccessible. Therefore, you should not enable this option if your
395 # non-Apple OSes work correctly; enable it only if you have problems with
396 # some hardware devices. When needed, a value of "10.9" usually works, but
397 # you can experiment with other values. This feature has no effect on
398 # non-Apple computers.
399 # The default is inactive (no OS X spoofing is done).
400 #
401 #spoof_osx_version 10.9
402
403 # Set the CSR values for Apple's System Integrity Protection (SIP) feature.
404 # Values are one-byte (two-character) hexadecimal numbers. These values
405 # define which specific security features are enabled. Below are the codes
406 # for what the values mean. Add them up (in hexadecimal!) to set new values.
407 # Apple's "csrutil enable" and "csrutil disable" commands set values of 10
408 # and 77, respectively.
409 # CSR_ALLOW_UNTRUSTED_KEXTS 0x01
410 # CSR_ALLOW_UNRESTRICTED_FS 0x02
411 # CSR_ALLOW_TASK_FOR_PID 0x04
412 # CSR_ALLOW_KERNEL_DEBUGGER 0x08
413 # CSR_ALLOW_APPLE_INTERNAL 0x10
414 # CSR_ALLOW_UNRESTRICTED_DTRACE 0x20
415 # CSR_ALLOW_UNRESTRICTED_NVRAM 0x40
416 #
417 #csr_values 10,77
418
419 # Include a secondary configuration file within this one. This secondary
420 # file is loaded as if its options appeared at the point of the "include"
421 # token itself, so if you want to override a setting in the main file,
422 # the secondary file must be referenced AFTER the setting you want to
423 # override. Note that the secondary file may NOT load a tertiary file.
424 #
425 #include manual.conf
426
427 # Sample manual configuration stanzas. Each begins with the "menuentry"
428 # keyword followed by a name that's to appear in the menu (use quotes
429 # if you want the name to contain a space) and an open curly brace
430 # ("{"). Each entry ends with a close curly brace ("}"). Common
431 # keywords within each stanza include:
432 #
433 # volume - identifies the filesystem from which subsequent files
434 # are loaded. You can specify the volume by filesystem
435 # label, by partition label, or by partition GUID number
436 # (but NOT yet by filesystem UUID number).
437 # loader - identifies the boot loader file
438 # initrd - Specifies an initial RAM disk file
439 # icon - specifies a custom boot loader icon
440 # ostype - OS type code to determine boot options available by
441 # pressing Insert. Valid values are "MacOS", "Linux",
442 # "Windows", and "XOM". Case-sensitive.
443 # graphics - set to "on" to enable graphics-mode boot (useful
444 # mainly for MacOS) or "off" for text-mode boot.
445 # Default is auto-detected from loader filename.
446 # options - sets options to be passed to the boot loader; use
447 # quotes if more than one option should be passed or
448 # if any options use characters that might be changed
449 # by rEFInd parsing procedures (=, /, #, or tab).
450 # disabled - use alone or set to "yes" to disable this entry.
451 #
452 # Note that you can use either DOS/Windows/EFI-style backslashes (\)
453 # or Unix-style forward slashes (/) as directory separators. Either
454 # way, all file references are on the ESP from which rEFInd was
455 # launched.
456 # Use of quotes around parameters causes them to be interpreted as
457 # one keyword, and for parsing of special characters (spaces, =, /,
458 # and #) to be disabled. This is useful mainly with the "options"
459 # keyword. Use of quotes around parameters that specify filenames is
460 # permissible, but you must then use backslashes instead of slashes,
461 # except when you must pass a forward slash to the loader, as when
462 # passing a root= option to a Linux kernel.
463
464 # Below are several sample boot stanzas. All are disabled by default.
465 # Find one similar to what you need, copy it, remove the "disabled" line,
466 # and adjust the entries to suit your needs.
467
468 # A sample entry for a Linux 3.13 kernel with EFI boot stub support
469 # on a partition with a GUID of 904404F8-B481-440C-A1E3-11A5A954E601.
470 # This entry includes Linux-specific boot options and specification
471 # of an initial RAM disk. Note uses of Linux-style forward slashes.
472 # Also note that a leading slash is optional in file specifications.
473 menuentry Linux {
474 icon EFI/refind/icons/os_linux.png
475 volume 904404F8-B481-440C-A1E3-11A5A954E601
476 loader bzImage-3.3.0-rc7
477 initrd initrd-3.3.0.img
478 options "ro root=UUID=5f96cafa-e0a7-4057-b18f-fa709db5b837"
479 disabled
480 }
481
482 # A sample entry for loading Ubuntu using its standard name for
483 # its GRUB 2 boot loader. Note uses of Linux-style forward slashes
484 menuentry Ubuntu {
485 loader /EFI/ubuntu/grubx64.efi
486 icon /EFI/refind/icons/os_linux.png
487 disabled
488 }
489
490 # A minimal ELILO entry, which probably offers nothing that
491 # auto-detection can't accomplish.
492 menuentry "ELILO" {
493 loader \EFI\elilo\elilo.efi
494 disabled
495 }
496
497 # Like the ELILO entry, this one offers nothing that auto-detection
498 # can't do; but you might use it if you want to disable auto-detection
499 # but still boot Windows....
500 menuentry "Windows 7" {
501 loader \EFI\Microsoft\Boot\bootmgfw.efi
502 disabled
503 }
504
505 # EFI shells are programs just like boot loaders, and can be
506 # launched in the same way. You can pass a shell the name of a
507 # script that it's to run on the "options" line. The script
508 # could initialize hardware and then launch an OS, or it could
509 # do something entirely different.
510 menuentry "Windows via shell script" {
511 icon \EFI\refind\icons\os_win.png
512 loader \EFI\tools\shell.efi
513 options "fs0:\EFI\tools\launch_windows.nsh"
514 disabled
515 }
516
517 # Mac OS is normally detected and run automatically; however,
518 # if you want to do something unusual, a manual boot stanza may
519 # be the way to do it. This one does nothing very unusual, but
520 # it may serve as a starting point. Note that you'll almost
521 # certainly need to change the "volume" line for this example
522 # to work.
523 menuentry "My Mac OS X" {
524 icon \EFI\refind\icons\os_mac.png
525 volume "OS X boot"
526 loader \System\Library\CoreServices\boot.efi
527 disabled
528 }