(require 'ivy-ox)
#+END_SRC
* Writing this manual :noexport:
-For highlighting a section without introducing a new subheading use
-definition lists. The definition list "owns" the following text if the
-text is indented by 5 spaces. Use ~C-q~ to indent these
-paragraphs. New paragraphs can also be started, as long as they have
-the 5 spaces indent.
-Definition lists need to be separated from regular lists with two newlines.
-
-Many times, definitions lists like this one are used:
+To highlight a section without introducing a new subheading use
+definition lists. The definition list "owns" the subsequent text if
+the text is indented by 5 spaces. Use ~C-q~ to indent the
+paragraphs. Start new paragraphs with 5 spaces indented. To separate
+definition lists from regular lists, use two newlines.
+
+A typical definition list:
#+BEGIN_EXAMPLE
- ~C-M-j~ (=ivy-immediate-done=) ::
#+END_EXAMPLE
-The code and kbd part of this heading will be recognized and added as
-=@vindex= and =@kindex= appropriately.
+The code and kbd part is recognized and added as =@vindex= and
+=@kindex= respectively.
-For declaring a =@defopt= section for =defcustom= or =defvar=, also
-use definition lists. They need to have the following form in order to
-be recognized in the texinfo export:
+Use definition lists to declare a =@defopt= section for =defcustom=
+or =defvar=. For proper Texinfo export, use this form:
#+BEGIN_EXAMPLE
User Option =ivy-wrap= ::
#+END_EXAMPLE
-To name each heading, set its =CUSTOM_ID= property. This can be done
-easily with =worf='s ~C-u L~.
+Set =CUSTOM_ID= property to name each heading. For example, =worf='s
+~C-u L~. This will result in consistent HTML node names.
-Texinfo export likes to have one empty line before each source block.
+Keep one empty line before each source block for proper Texinfo
+exports.
* Copying
:PROPERTIES:
:COPYING: t
Install Ivy automatically through Emacs's package manager, or manually
from Ivy's development repository.
-Ivy should run fine on a typical Emacs bundled in your OS's package
-manager, the oldest of which is Emacs 24.3.1. However, the faces
-display will work much better for Emacs 24.5.1, which is the latest
-stable version.
+Emacs 24.3.1 is the oldest version to run Ivy. Emacs 24.5.1 is the
+oldest version that runs Ivy with fancy faces display.
** Installing from Emacs Package Manager
:PROPERTIES:
- Configuration steps ::
- First clone the Swiper repository:
+ First clone the Swiper repository with:
#+begin_src sh
cd ~/git && git clone https://github.com/abo-abo/swiper
cd swiper && make compile
#+end_src
- Then add this to Emacs init:
+ Second, add these lines to the Emacs init file:
#+begin_src elisp
(add-to-list 'load-path "~/git/swiper/")
(require 'ivy)
#+end_src
- To update the code:
+ Then, update the code with:
#+begin_src sh
git pull
:PROPERTIES:
:CUSTOM_ID: getting-started
:END:
-First, enable Ivy completion everywhere:
+First enable Ivy completion everywhere:
#+begin_src elisp
(ivy-mode 1)
#+begin_src elisp
(setq ivy-use-virtual-buffers t)
(setq ivy-height 10)
-(setq ivy-display-style 'fancy)
(setq ivy-count-format "(%d/%d) ")
#+end_src
-For additional customizations, refer to =M-x describe-variable=
+If you want, you can go without any customizations at all. The above
+settings are the most bang for the buck in terms of customization. So
+users that typically don't like customize a lot are advise to look at
+these settings first.
+
+For more advanced customizations, refer to =M-x describe-variable=
documentation.
* Key bindings
=ivy-minibuffer-map= keymap variable. The most frequently used ones
are described here.
-=swiper= or =counsel-M-x= add more through the =keymap= argument to
-=ivy-read=. These keys, also active in the minibuffer, are described
-under their respective commands.
+=swiper= or =counsel-M-x= add more key bindings through the =keymap=
+argument to =ivy-read=. These keys, also active in the minibuffer, are
+described under their respective commands.
-An important idea behind =ivy-minibuffer-map=, unlike
-e.g. =isearch-mode-map= or Ido keymap is that the minibuffer is a
-fully capable editing area: bindings like ~C-a~, ~C-f~, ~M-d~,
-~M-DEL~, ~M-b~, ~M-w~, ~C-k~, ~C-y~ all work as if you were in a
-=fundamental-mode= buffer.
+A key feature of =ivy-minibuffer-map= is its full editing capability
+where the familiar ~C-a~, ~C-f~, ~M-d~, ~M-DEL~, ~M-b~, ~M-w~, ~C-k~,
+~C-y~ key bindings work the same as in =fundamental-mode=.
*** Key bindings for navigation
:PROPERTIES:
- User Option =ivy-wrap= ::
- This user option allows to get the wrap-around behavior for ~C-n~
- and ~C-p~. When set to =t=, =ivy-next-line= and
- =ivy-previous-line= will cycle past the last and the first
- candidates respectively.
+ Specifies the wrap-around behavior for ~C-n~ and ~C-p~. When
+ =ivy-wrap= is set to =t=, =ivy-next-line= and =ivy-previous-line=
+ will cycle past the last and the first candidates respectively.
- This behavior is off by default.
+ Warp-around behavior is off by default.
- User Option =ivy-height= ::
- Use this variable to adjust the minibuffer height, and therefore
- the scroll size for ~C-v~ and ~M-v~.
+ Use this option to adjust the minibuffer height, which also
+ affects scroll size when using ~C-v~ and ~M-v~ key bindings.
+
+ =ivy-height= is 10 lines by default.
*** Key bindings for single selection, action, then exit minibuffer
:PROPERTIES:
extends usability of lists in Emacs.
- ~C-m~ or ~RET~ (=ivy-done=) ::
- Calls the default action and exits the minibuffer.
+ Calls the default action and then exits the minibuffer.
- ~M-o~ (=ivy-dispatching-done=) ::
- Presents all available valid actions from which to choose. When
- there is only one action available, there is no difference
- between ~M-o~ and ~C-m~.
+ Presents valid actions from which to choose. When only one action
+ is available, there is no difference between ~M-o~ and ~C-m~.
- ~C-j~ (=ivy-alt-done=) ::
When completing file names, selects the current directory
candidate and starts a new completion session there. Otherwise,
- it's the same as =ivy-done=.
+ it is the same as =ivy-done=.
- ~TAB~ (=ivy-partial-or-done=) ::
Attempts partial completion, extending current input as much as
- possible. ~TAB TAB~ is the same as ~C-j~.
+ possible. ~TAB TAB~ is the same as ~C-j~ (=ivy-alt-done=).
Example ERT test:
other direction.
- =ivy-resume= ::
- Recalls the state of the completion session just before its last exit.
+ Recalls the state of the completion session just before its last
+ exit.
Useful after an accidental ~C-m~ (=ivy-done=).
- ~M-w~ (=ivy-kill-ring-save=) ::
Copies selected candidates to the kill ring.
- When the region is active, copies active region instead.
+ Copies the region if the region is active.
*** Hydra in the minibuffer
:PROPERTIES:
- ~C-o~ (=hydra-ivy/body=) ::
Invokes the hydra menu with short key bindings.
-Minibuffer editing is disabled when Hydra is active. Instead, you get
-short aliases for the common commands:
+When Hydra is active, minibuffer editing is disabled and menus
+display short aliases:
| Short | Normal | Command name |
|-------+-----------+---------------------------|
Hydra reduces key strokes, for example: ~C-n C-n C-n C-n~ is ~C-o
jjjj~ in Hydra.
-Additionally, you get access to the folowing commands that are
-normally not bound:
+Hydra menu offers these additioanl bindings:
- ~c~ (=ivy-toggle-calling=) ::
- Toggle calling the action after each candidate change. This
- effectively modifies ~j~ to ~jg~, ~k~ to ~kg~ etc.
+ Toggle calling the action after each candidate change. It
+ modifies ~j~ to ~jg~, ~k~ to ~kg~ etc.
- ~m~ (=ivy-toggle-fuzzy=) ::
Toggle the current regexp matcher.
Use a menu to select an action.
- ~C~ (=ivy-toggle-case-fold=) ::
- Toggle case folding (matching both upper and lower case
- characters with lower case input).
+ Toggle case folding (match both upper and lower case
+ characters for lower case input).
*** Saving the current completion session to a buffer
:PROPERTIES:
Ivy has no limit on the number of active buffers like these.
-Ivy takes care of making these buffer names unique. It applies
-descriptive names, for example: =*ivy-occur counsel-describe-variable
+Ivy takes care of naming buffers uniquely by constructing descriptive
+names. For example: =*ivy-occur counsel-describe-variable
"function$*=.
-* Completion styles
+* Completion Styles
:PROPERTIES:
:CUSTOM_ID: completion-styles
:END:
simply have to match this regex. Each collection can be assigned its
own regex builder by customizing =ivy-re-builders-alist=.
-The keys of this alist are collection names, and the values are one of:
+The keys of this alist are collection names, and the values are one of
+the following:
- =ivy--regex=
- =ivy--regex-plus=
- =ivy--regex-ignore-order=
- =ivy--regex-fuzzy=
- =regexp-quote=
-There's also a catch-all key =t= that applies to all collections that
-don't have their own key.
+A catch-all key, =t=, applies to all collections that don't have their
+own key.
The default is:
'((t . ivy--regex-plus)))
#+end_src
-For example, here is how to assign a custom regex builder to file name
+This example shows a custom regex builder assigned to file name
completion:
#+begin_src elisp
(t . ivy--regex-plus)))
#+end_src
-Here, =read-file-name-internal= is a function passed as the second
-argument to =completing-read= when completing file names.
+Here, =read-file-name-internal= is a function that is passed as the
+second argument to =completing-read= for file name completion.
-The regex builder resolution is a follows, in order of priority:
+The regex builder resolves as follows (in order of priority):
1. =re-builder= argument passed to =ivy-read=.
2. =collection= argument passed to =ivy-read= is a function and has an
entry on =ivy-re-builders-alist=.
rebuilding it into a regex.
As the search string is typed in Ivy's minibuffer, it is transformed
-into proper regex syntax. If the string is ="for example"=, it is
+into valid regex syntax. If the string is ="for example"=, it is
transformed into
#+begin_src elisp
which in regex terminology matches ="for"= followed by a wild card and
then ="example"=. Note how Ivy uses the space character to build wild
-cards. For literal white space matching in Ivy, use an extra space: to
-match one space type two spaces, to match two spaces type three
-spaces, and so on.
+cards. To match a literal white space, use an extra space. So to match
+one space type two spaces, to match two spaces type three spaces, and
+so on.
As Ivy transforms typed characters into regex strings, it provides an
intuitive feedback through font highlights.
such large lists using =flx= package's scoring mechanism, if it's
installed.
-In case =ivy--regex-fuzzy= isn't your current regexp builder, you
-toggle it during completion with ~C-o m~.
+~C-o m~ toggles the current regexp builder.
+
* Customization
:PROPERTIES:
- =ivy-confirm-face= ::
Highlights the "(confirm)" part of the prompt.
- Used in conjunction with the built-in
- =confirm-nonexistent-file-or-buffer= defcustom. When you set
- this variable to =t=, you'll have to confirm non-existent files
- and buffer with another ~RET~ in =ivy-mode=.
+ When =confirm-nonexistent-file-or-buffer= set to =t=, then
+ confirming non-existent files in =ivy-mode= requires an
+ additional ~RET~.
- This face will be used to highlight the confirmation prompt.
+ The confirmation prompt will use this face.
- For example, use this setting:
+ For example:
#+begin_src elisp
(setq confirm-nonexistent-file-or-buffer t)
- =ivy-match-required-face= ::
Highlights the "(match required)" part of the prompt.
- Sometimes, the Emacs functions that call completion specify to it
- that a match is required, i.e. you can't just type in some random
- stuff - you have to select one of the candidates given to you.
- In that case, =ivy-mode= will appropriately change the prompt.
+ When completions have to match available candidates and cannot
+ take random input, the "(match required)" prompt signals this
+ constraint.
For example, call =describe-variable=, enter "waldo" and press
- ~RET~ - the prompt will be appended with "(match required)".
- Press any key and the prompt warning will disappear.
+ ~RET~ - "(match required)" is prompted.
+ Press any key for the prompt to disappear.
- =ivy-subdir= ::
Highlights directories when completing file names.
- =ivy-remote= ::
- =ivy-virtual= ::
Highlights virtual buffers when completing buffer names.
- Virtual buffers correspond to your bookmarks and the =recentf=
- list.
+ Virtual buffers correspond to bookmarks and recent files list,
+ =recentf=.
- Enable the virtual buffers like this:
+ Enable virtual buffers with:
#+begin_src elisp
(setq ivy-use-virtual-buffers t)
:CUSTOM_ID: defcustoms
:END:
- User Option =ivy-count-format= ::
- A string that describes how to show the number of candidates and
- possibly the current candidate in the prompt.
+ A string that specifies display of number of candidates and
+ current candidate, if one exists.
- By default, the number of matching candidates will be shown as an
- integer with padding on the right.
+ The number of matching candidates by default is shown as a right-
+ padded integer value.
To disable showing the number of candidates:
(setq ivy-count-format "")
#+end_src
- To show the current candidate, in addition to the number of candidates:
+ To also display the current candidate:
#+begin_src elisp
(setq ivy-count-format "(%d/%d) ")
#+end_src
- This variable uses =format=-style switches, see the documentation
- of =format= for more info.
+ The =format=-style switches this variable uses are described
+ in the =format= documentation.
- User Option =ivy-display-style= ::
- Decides how to highlight the candidates in the minibuffer.
+ Specifies highlighting candidates in the minibuffer.
- The default setting is ='fancy= and it's available only for Emacs
- versions 24.5 or newer.
+ The default setting is ='fancy= and valid only in Emacs versions
+ 24.5 or newer.
- Set this to =nil= to get a more plain minibuffer.
+ Set =ivy-display-style= to =nil= for a plain minibuffer.
- User Option =ivy-on-del-error-function= ::
- Decides what to do when ~DEL~ (=ivy-backward-delete-char=)
- throws.
+ Specify what when ~DEL~ (=ivy-backward-delete-char=) throws.
- The default behavior is to quit the completion - this is handy if
- you invoke the completion by mistake.
+ The default behavior is to quit the completion after ~DEL~ -- a
+ handy key to invoke after mistakenly triggering a completion.
** Actions
:PROPERTIES:
:PROPERTIES:
:CUSTOM_ID: what-are-actions
:END:
-An action is a function of a single argument that gets called after
-you select a candidate during completion. The selected candidate is
-passed to this function as a string argument.
+An action is a function that is called after you select a candidate
+during completion. This function takes a single string argument, which
+is the selected candidate.
- Window context when calling an action ::
Currently, the action is executed in the minibuffer window
:PROPERTIES:
:CUSTOM_ID: how-can-different-actions-be-called
:END:
-- ~C-m~ (=ivy-done=) calls the current/default action.
-- ~M-o~ (=ivy-dispatching-done=) selects among all actions, calls it
- and exits.
-- ~C-M-o~ (=ivy-dispatching-call=) selects among all actions, calls it
- and doesn't exit.
+- ~C-m~ (=ivy-done=) calls the current action.
+- ~M-o~ (=ivy-dispatching-done=) presents available actions for
+ selection, calls it after selection, and then exits.
+- ~C-M-o~ (=ivy-dispatching-call=) presents available actions for
+ selection, calls it after selection, and then does not exit.
-*** How can the action list be modified?
+*** How to modify the actions list?
:PROPERTIES:
-:CUSTOM_ID: how-can-the-action-list-be-modified
+:CUSTOM_ID: how-to-modify-the-actions-list
:END:
Currently, you can append any amount of your own actions to the
default list of actions. This can be done either for a specific
("y" ivy-yank-action "yank")))
#+end_src
-Now in any completion session you can access =ivy-yank-action= with
-~M-o y~ and =ivy-copy-to-buffer-action= with ~M-o i~.
+Then in any completion session, ~M-o y~ invokes =ivy-yank-action=, and
+~M-o i~ invokes =ivy-copy-to-buffer-action=.
**** How to undo adding the two actions
:PROPERTIES:
:CUSTOM_ID: how-to-undo-adding-the-two-actions
:END:
-=ivy-set-actions= simply modifies the internal dict with new data, so
-you can set the extra actions list to =nil= by assigning =nil= value
-to the =t= key:
+Since =ivy-set-actions= modifies the internal dictionary with new
+data, set the extra actions list to =nil= by assigning =nil= value to
+the =t= key as follows:
#+begin_src elisp
(ivy-set-actions t nil)
("k" my-action-3 "action 3"))))
#+end_src
-Here, the number determines the index of the default action. For each
-action, the strings are used to describe it during the selection.
+The number 1 above is the index of the default action. Each
+action has its own string description for easy selection.
-**** Testing out the above function with =ivy-occur=
+**** Test the above function with =ivy-occur=
:PROPERTIES:
-:CUSTOM_ID: testing-out-the-above-function-with-ivy-occur
+:CUSTOM_ID: test-the-above-function-with-ivy-occur
:END:
To examine each action with each candidate in a key-efficient way, try:
-- Call =my-command-with-3-actions=.
-- Press ~C-c C-o~ to close the completion and move to an ivy-occur buffer.
-- Press ~kkk~ to move to the first candidate, since you're likely at the end of the buffer.
-- Press ~oo~ to call the first action.
-- Press ~oj~ and ~ok~ to call the second and the third actions.
+- Call =my-command-with-3-actions=
+- Press ~C-c C-o~ to close the completion window and move to an
+ ivy-occur buffer
+- Press ~kkk~ to move to the first candidate, since the point is most
+ likely at the end of the buffer
+- Press ~oo~ to call the first action
+- Press ~oj~ and ~ok~ to call the second and the third actions
- Press ~j~ to move to the next candidate
-- ...
+- Press ~oo~, ~oj~, ~ok~
+- Press ~j~ to move to the next candidate
+- and so on...
+
** Packages
:PROPERTIES:
:CUSTOM_ID: packages
:END:
- =org-mode= ::
- With the most recent version, =org-mode= will obey
- =completing-read-function= (which =ivy-mode= sets), so it should
- work by default. If you try it for refiling to headings with
- similar names, you'll really notice how much better =ivy-mode= is
- at it.
+ =org-mode= versions 8.3.3 or later obey
+ =completing-read-function= (which =ivy-mode= sets). Try refiling
+ headings with similar names to appreciate =ivy-mode=.
- =magit= ::
- This setting is needed to use ivy completion:
+ Magit requries this setting for ivy completion:
#+begin_src elisp
(setq magit-completing-read-function 'ivy-completing-read)
#+end_src
- =find-file-in-project= ::
- Will use ivy by default if it's available.
+ It uses ivy by default if Ivy is installed.
- =projectile= ::
- This setting is needed to use ivy completion:
+ Projectile requires this seeting for ivy completion:
#+begin_src elisp
(setq projectile-completion-system 'ivy)
#+end_src
- =helm-make= ::
- This setting is needed to use ivy completion:
+ Helm-make requires this seeting for ivy completion.
#+begin_src elisp
(setq helm-make-completion-method 'ivy)
:PROPERTIES:
:CUSTOM_ID: file-name-completion
:END:
-Since file name completion is so essential, ivy has a few extra
-bindings that work here.
+Since file name completion is ubiquitious, Ivy provides extra
+bindings that work here:
+
- ~C-j~ (=ivy-alt-done=) ::
- Use on a directory to restart the completion from that
- directory. Use it on a file or =./= to exit the completion with
- the selected candidate.
+ On a directory, restarts completion from that directory.
+
+ On a file or =./=, exit completion with the selected candidate.
- ~DEL~ (=ivy-backward-delete-char=) ::
- When completing file names, and the current input is empty,
- restart the completion in the parent directory.
+ Restart the completion in the parent directory if current input
+ is empty.
- ~//~ (=self-insert-command=) ::
Switch to the root directory.
- ~~~ (=self-insert-command=) ::
Switch to the home directory.
- ~/~ (=self-insert-command=) ::
- If the current input is precisely an existing directory, switch
- the completion to that directory.
+ If the current input matches an existing directory name exactly,
+ switch the completion to that directory.
- ~M-q~ (=ivy-toggle-regexp-quote=) ::
- Toggle between your input being a regexp and not.
+ Toggle between input as regexp or not.
- Since file names tend to include =.=, which matches any char in
- regexp mode, you might want to switch to matching literally.
+ Switch to matching literally since file names include =.=, which
+ is for matching any char in regexp mode.
- User Option =ivy-extra-directories= ::
Decide if you want to see =../= and =./= during file name
completion.
- You might want to remove =../=, since selecting it is the same as
- ~DEL~. On the other hand, having it around makes it possible to
- navigate anywhere with only ~C-n~, ~C-p~ and ~C-j~.
+ Reason to remove: =../= is the same as ~DEL~.
+
+ Reason not to remove: navigate anywhere with only ~C-n~, ~C-p~
+ and ~C-j~.
- Similarly, =./= can be removed as well.
+ Likewise, =./= can be removed.
- Using TRAMP ::
- Completion for TRAMP is supported in a peculiar way. From any
- directory, with the empty input, inputting =/ssh:= and pressing
- ~C-j~ (or ~RET~ which is the same thing) will give you a
- completion for host and user names.
+ From any directory, with the empty input, inputting =/ssh:= and
+ pressing ~C-j~ (or ~RET~, which is the same thing) completes for
+ host and user names.
- You can also input =/ssh:user@= to get domain completion with
- user name already selected.
+ For =/ssh:user@= input, completes the domain name.
- Described above is a recommended and simple method of
- interaction. If you find it lacking, you can still use ~C-i~,
- which does largely the same as the default completion does.
+ ~C-i~ works in a similar way to the default completion.
- History ::
- The history works with ~M-p~, ~M-n~, and ~C-r~, as in all other
- completion sessions. A custom history code was implemented for
- file name completion. This code will cycle you through all
- previous files that you opened, including the input with which
- the file was opened. It also works well with TRAMP.
+ File history works the same with ~M-p~, ~M-n~, and ~C-r~, but
+ uses a custom code for file name completion that cycles through
+ files previously opened. It also works with TRAMP files.
** Buffer Name Completion
:PROPERTIES:
:CUSTOM_ID: buffer-name-completion
:END:
- User Option =ivy-use-virtual-buffers= ::
- When non-nil, add =recentf-mode= and bookmarks to =ivy-switch-buffer=.
+ When non-nil, add =recentf-mode= and bookmarks to
+ =ivy-switch-buffer= completion candidates.
- If you add this to your setup:
+ Adding this to Emacs init file:
#+begin_src elisp
(setq ivy-use-virtual-buffers t)
#+end_src
- when using =ivy-switch-buffer= additional buffers will be
- appended to your live buffer list. These buffers will be
- highlighted with the =ivy-virtual= face, and selecting them will
- open the corresponding file.
+ will add additional virual buffers to the buffers list for recent
+ files. Selecting such virtual buffers, which are highlighted with
+ =ivy-virtual= face, will open the corresponding file.
+
** Counsel commands
:PROPERTIES:
:CUSTOM_ID: counsel-commands
:END:
-The main advantage of using =counsel-= functions over their basic
-equivalents with =ivy-mode= enabled are the following:
-
-1. You can use everything related to multi-actions and non-exiting actions.
-2. You can use =ivy-resume= to resume your last completion session.
-3. You can customize them further with =ivy-set-actions=, =ivy-re-builders-alist=.
-4. You can customize their individual keymaps, like
- =counsel-describe-map=, =counsel-git-grep-map=, or
- =counsel-find-file-map=, instead of just customizing
- =ivy-minibuffer-map= that applies to all completion sessions.
+The main advantages of =counsel-= functions over their basic
+equivalents in =ivy-mode= are:
+
+1. Multi-actions and non-exiting actions work.
+2. =ivy-resume= can resume the last completion session.
+3. Customize =ivy-set-actions=, =ivy-re-builders-alist=.
+4. Customize individual keymaps, such as =counsel-describe-map=,
+ =counsel-git-grep-map=, or =counsel-find-file-map=, instead of
+ customizing =ivy-minibuffer-map= that applies to all completion
+ sessions.
* API
:PROPERTIES:
:CUSTOM_ID: api
:END:
-The main (and only) entry point is =ivy-read= function. It has only
-two required arguments and many optional arguments that you can pass
-by key. Although the =:action= argument is optional, it's very
-recommended that you use it, otherwise the extra features (as compared
-to the default completion) like multi-actions, non-exiting actions,
-=ivy-occur= and =ivy-resume= will not be possible.
+The main (and only) entry point is =ivy-read= function. It takes two
+required arguments and many optional arguments that can be passed by
+key. The optional =:action= argument is highly recommended for
+features such as multi-actions, non-exiting actions, =ivy-occur= and
+=ivy-resume=.
** Required arguments for =ivy-read=
:PROPERTIES:
- =collection= ::
Either a list of strings, a function, an alist or a hash table.
- In case it's a function, it has to be compatible with
+ If a function, then it has to be compatible with
=all-completions=.
** Optional arguments for =ivy-read=
:CUSTOM_ID: optional-arguments-for-ivy-read
:END:
- =predicate= ::
- A function to filter the initial collection with, compatible with =all-completions=.
+ Is a function to filter the initial collection. It has to be
+ compatible with =all-completions=.
- =require-match= ::
- When non-nil, don't let the user exit with a custom input - it
- must match one of the candidates.
+ When set to a non-nil value, input must match one of the
+ candidates. Custom input is not accepted.
- =initial-input= ::
- A string to be initially inserted into the minibuffer. This
- argument is included for compatibility with
- =completing-read=. Consider using the =preselect= argument
- instead - it's often superior.
+ This string argument is included for compatibility with
+ =completing-read=, which inserts it into the minibuffer.
+
+ It's recommended to use the =preselect= argument instead of this.
- =history= ::
- A symbol name to store the history. See =completing-read=.
+ Name of the symbol to store history. See =completing-read=.
- =preselect= ::
- When it's a string, make the first candidate matching this string
- initially selected.
+ When set to a string value, select the first candidate matching
+ this value.
- When it's an integer, make the candidate with that index
- initially selected.
+ When set to an integer value, select the candidate with that
+ index value.
Every time the input becomes empty, the item corresponding to to
=preselect= is selected.
has priority over =ivy-minibuffer-map= and can be modified at any
later stage.
- =update-fn= ::
- A function to call each time the current candidate is changed.
+ Is the function called each time the current candidate changes.
This function takes no arguments and is called in the
minibuffer's =post-command-hook=. See =swiper= for an example
usage.
- =sort= ::
- When non-nil, use =ivy-sort-functions-alist= to sort the given
- collection. The collection will not be sorted when it's larger
- than =ivy-sort-max-size=.
+ When non-nil, use =ivy-sort-functions-alist= to sort the
+ collection as long as the collection is not larger than
+ =ivy-sort-max-size=.
- =action= ::
- A function to call after a result is selected. Takes a single
- string argument.
+ Is the function to call after selection. It takes a string
+ argument.
- =unwind= ::
- A function with no arguments to call before exiting
- completion. This function is called even if the completion is
- interrupted with e.g. ~C-g~. See =swiper= for an example usage.
+ Is the function to call before exiting completion. It takes no
+ arguments. This function is called even if the completion is
+ interrupted with ~C-g~. See =swiper= for an example usage.
- =re-builder= ::
- A function that takes a string and returns a corresponding regex.
- See the section on completion styles.
+ Is a function that takes a string and returns a valid regex. See
+ =Completion Styles= for details.
- =matcher= ::
- A function that takes a regex and a list of strings and returns a
- list of strings that "match" the regex. Normally a
- straightforward function is used. Use this argument to really
- fine-tune the matching process. See =counsel-find-file= for an
- example usage.
+ Is a function that takes a regex string and a list of strings and
+ returns a list of strings matching the regex. Any ordinary Emacs
+ matching function will suffice, yet finely tuned mathing
+ functions can be used. See =counsel-find-file= for an example
+ usage.
- =dynamic-collection= ::
When non-nil, =collection= will be used to dynamically generate
the candidates each time the input changes, instead of being used
once statically with =all-completions= to generate a list of
strings. See =counsel-locate= for an example usage.
- =caller= ::
- A symbol to uniquely identify the function that called
- =ivy-read=. This is useful in all kinds of customization
- scenarios.
+ Is a symbol that uniquely identifies the function that called
+ =ivy-read=, which may be useful for further customizations.
** Example - =counsel-describe-function=
:PROPERTIES:
:CUSTOM_ID: example---counsel-describe-function
:END:
-This is a typical example of a function with a non-async collection:
-all the strings in the collection are known before the user does any
-input.
+This is a typical example of a function with a non-async collection,
+which is a collection where the strings in the collection are known
+prior to any input from the user.
-Note that only the first two arguments (and the =action=) are really
-important - the rest is just fine-tuning and could be omitted.
+Only the first two arguments (along with =action=) are essential - the
+rest of the arguments are for fine-tuning, and could be omitted.
The =action= argument could also be omitted - but then =ivy-read=
would do nothing except returning the string result, which you could
- The =prompt= argument is a simple string ending in ": ".
- The =collection= argument evaluates to a (large) list of strings.
-- The =keymap= argument allows for a custom keymap to supplement =ivy-minibuffer-map=.
-- The =preselect= is provided via =counsel-symbol-at-point=. This way,
- if the point lies on a symbol or a word, ivy will try to pre-select
- the first candidate that matches this symbol. If it happens to be
- the candidate that the user wanted, it can be selected with ~RET~
- and no need for further input.
-- The =history= argument ensures that the command has its own history,
- and doesn't need to share the common history =ivy-history= that all
- commands without their own history share.
-- The =require-match= is set to =t=, since it doesn't make sense to
+- The =keymap= argument is for a custom keymap to supplement =ivy-minibuffer-map=.
+- The =preselect= is provided by =counsel-symbol-at-point=, which
+ returns a symbol near the point. Ivy then selects the first
+ candidate from the collection that matches this symbol. To select
+ this pre-selected candidate, a ~RET~ will suffice. No further user
+ input is necessary.
+- The =history= argument is for keeping the history of this command
+ separate from the common history in =ivy-history=.
+- The =require-match= is set to =t= since it doesn't make sense to
call =describe-function= on an un-interned symbol.
-- The =sort= argument is set to =t=, since it's usually useful to have
- functions with similar names be close to each other in the candidate
- list. However, after loading many packages the collection often
- exceeds the default value of =ivy-sort-max-size= (30000). The user
- can customize this variable to decide which is more important: the
- sorting or the completion start-up time.
+- The =sort= argument is set to =t= so choosing between similar
+ candidates becomes easier. Sometimes, the collection size will
+ exceed =ivy-sort-max-size=, which is 30000 by default. In that case
+ the sorting will not happen to avoid delays.
+
+ Adjust this variable to choose between sorting time and completion
+ start-up time.
- The =action= argument calls =describe-function= on the interned
selected candidate.
- The =caller= argument identifies this completion session. This is
:CUSTOM_ID: example---counsel-locate
:END:
This is a typical example of a function with an async collection.
-Since we can't pre-compute all the collection items valid for an empty
-input and store them in the memory, the collection function is called
-each time the user updates the input. However, while the returned
-list of strings is used immediately (usually it's something like
-='("please wait...")=), it's expected of the collection function to
-make a call to =start-process= and update the minibuffer text at some
-point when the process is finished.
-
-Async collections are a good fit for long-running shell commands, like
-=locate=. As soon as there is enough input, a new process is started
-and the old process is killed (since the old input is no longer
-relevant). The user can either type more or wait for the already
-running process to finish and update the minibuffer.
+Since the collection function cannot pre-compute all the locatable
+files in memory within reasonable limits (time or memory), it relies
+on user input to filter the universe of possible candidates to a
+manageable size while also continuing to search asynchronously for
+possible candidates. Both the filtering and searching continues with
+each character change of the input with rapid updates to the
+collection presented without idle waiting times. This live update will
+continue as long as there are likely candidates. Eventually updates to
+the minibuffer will stop after user input, filtering, and searching
+have exhausted looking for possible candidates.
+
+Async collections suit long-running shell commands, such as =locate=.
+With each new input, a new process starts while the old process is
+killed. The collection is refreshed anew with each new process.
+Meanwhile the user can provide more input characters (for further
+narrowing) or select a candidate from the visible collection.
#+begin_src elisp
(defun counsel-locate-function (str)
non-async using =shell-command-to-string= and =split-string= to
produce a collection, then decide that you want async and simply swap in
=counsel--async-command=.
-- =counsel-locate= is an interactive function with optional =initial-input=.
+- =counsel-locate= is an interactive function with an optional =initial-input=.
- =#'counsel-locate-function= is passed as the =collection= argument.
-- =dynamic-collection= argument is set to t, since we have an async collection.
+- =dynamic-collection= is set to t, since this is an async collection.
- =action= argument uses =with-ivy-window= wrapper, since we want to open the
selected file in the same window from which =counsel-locate= was
called.